How to find from/for whom the mail has been bounced.

Hi,
I got a bounced email. I have to find which mail has bounced. For example lets take I have sent a mail to [email protected] and the mail is bounced. Now I have to read my message using Javamail API and have to find mail for which intended user is failed. Hope I am clear on my question.
One thing I found is failed recepient address will be in the bounced mail's body but to get it I need to parse the mail (some server doesn't even put it in the body). Is there any other way? (like including it in the header or somewhere)
Thanks,
Harish

Did you find the JavaMail FAQ? There's an entry in the FAQ that addresses
this question explicitly.

Similar Messages

How to find the group ids from which the mail has been sent

Hi,
We are able to see the list of mails have been sent to respective mail ids with the help of tcode SOST.
Is there any way to find through which group ids the mails have been sent.
Tehe details showing as the mail has been sent by Batchusr.
Please suggest how to find the group id from where the the mails have been triggered.
Regards,
Jena.

Hi
This is not helpfull
If you open any notification QM03, there you will get tab " Action Log"
If you click on action log , there are two fileds
Date and time for task release
I want to fetch these fileds in one of Z report.
I am unable to find table name for these two fileds
Task release Date
Task release Time
Can we add 'QN CHANGE DATE' parameter in the selection screen (just like QN creation date) w/ range? The user want to run the report by QN change date as well.

TS4009 how do you retrieve information after the system has been reset to default

how do you retrieve information after the system has been reset to default?

From a backup on itunes or icloud, assuming you have made backups. Connect to itunes and in the first tab for your device, choose to perform a restore.

How Vlan identifies from which port the data has come ?

Hi ,
We know that more number of ports can be configured to same vlan. How vlan distinguish between the ports ? How vlan knows from which port this frame has come ? in tagging we add the vlan id to the frame and not any other info ? little confused on how this haapens ??

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
A VLAN doesn't really distinguish between ports. A switch does, though, "remember" (for some time) the source MAC as frames enter its ports.
Tagged frames may contain more than VLAN ID, such as L2 CoS.

How to find out if your BB line has been capped?

Is there somewhere I can go to find out if my BB line has been capped? I had an email form BT about a month ago warning me I might exceed my download limit. In the end I did not exceed my limit for the month. But it was shortly after that my BB speed was cut in half and has remained that way ever since. I have had 2 engineers out who can find nothing wrong with the exchange, the line or the equipment in my house. Despite at least 3 SNR resets, my IP profile has been fixed at 750k for the whole time. My IP profile was 2000k or more before the speed was cut.
I just wonder if there is anyway to tell if your BB line has been throttled.

"it is very likely a local noise issue that your line is picking up it is not a line fault this is is why bt cannot find the fault the problem could be caused by many things microwaves central heating pumps computer monitors poweresupplies and many similar items"
If there is a local noise issue as you suggest, How would one detect such a thing? You can't just switch everything off in a house and leave it for 3 to 5 days to see if the BB speed increases. Surely the tests the the engineers did when they came out to see me would have detected any noise on the line when they tested the line.
The thing I find most frustrating is BT don't even seem able to admit I have any sort of problem at all. The fact I have had a stable connection for years and then suddenly it drops by half overnight seems not to be considered a problem. I think I might just change to another ISP. I really don't think it can be any worse than this.

How do offcard program know whether the applet has been personalizated?

The offcard program want to know whether the applet has been personalizated. if Y . the offcard program don't send the personalization command to the applet. anyway to inqury the applet state in offcard program. thxs

I don't know what card framework (OCF, JCOP tools or other) you use.
For the JCOP tools framework it is very simple. Connect to your applet by creating an instance of the com.ibm.jc.OPApplet. This class has a method called public int getState() wich returns "the applet privileges" in form the flags NOT_AVAILABLE, LOGICALLY_DELETED, INSTALLED, SELECTABLE, PERSONALIZED, BLOCKED and LOCKED.
Jan

How can I delay my MBP from hibernating until the lid has been closed for a set period of time?

After extensive research, I have been unable to solve this problem and I'm hoping someone can explain this to me.   Everytime I close the lid on my 13-inch, Early 2011 Macbook Pro, it immediately starts to write to disk (solid light on the front) for several seconds until it finally goes into Hibernate mode (flashing light on the front). The problem is, I frequently close the lid, then immediately reopen it within 15-30 seconds to resume typing or to add something I may have forgotten.   Each time I reopen the lid before the light has started flashing, the MBP wakes for a moment, and allows me to resume typing. However, the Hibernation process has already begun and within 30 seconds, the screen goes blank.   I have to wake it AGAIN, which is very annoying.
Based on my research, I could use pmset to change the hibernatemode to 0 (it is currently set at 3).   However, I dont wish to disable hibernate mode completely; I DO want it to save a hibernation image to disk if it happens to run out of battery, so that when I resume I havent lost anything.
I then researched using standby and standbydelay to attempt a delay of the write to disk when going into standby mode.   According to the pmset manual:
standby causes kernel power management to automatically hibernate a machine after it has slept for a
     specified time period. This saves power while asleep
standbydelay specifies the delay, in seconds, before writing the hibernation image to disk and powering
     off memory for Standby
I then set these values as below, expecting the laptop to wait 4200 seconds (70 minutes) before trying to write to disk when I close the lid:
standbydelay         4200
standby              1
Unfortunately, that did not work either.   If I close the lid, the light glows solid immediately (indicating it is writing to disk), and if I try to reopen the lid before it is done, it will wake and seem fine, then 30 seconds later it goes blank right in the middle of me typing something.   I usually have to click the mouse several times, or even the power button to re-wake it.
I do have InsomniaX installed, for when I want to close the lid and keep the machine awake permanently (while watching videos on airplay) and I have tried quitting that application to test this. However, when I close/reopen the lid..the result is the same.   I cant keep InsomniaX enabled all the time, because it will never go to sleep when I truly want it to.   If I am not using InsomniaX, I just want to delay hibernation until he lid has been closed for a set period (say 15 minutes or more). If I have not reopened the lid within that time, I want it to write to disk and go into hibernation mode. And if the battery runs all the way out, I want it to go into hibernation mode before shutting down so I can recover.
I would appreciate any help in solving this problem. Also any insight as to why the standbydelay setting above did not work.   Thanks!

Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

How to find Responsibility through which the user has logged in to Disco.

Hi All,
I have got a requirement to create a "Usage Report Summary by Responsibility" for all Oracle user having an Access to Oracle Disco Viewer.
In the report, I need to show the list of Oracle Users and the Responsibilities through which an User has logged in to Disco Viewer.
Kindly help me in finding the corresponding Disco tables to full-fill this requirement.
Available Information/queries in my Hand:
1. Query to find the list of Workbook and its shared Responsibilities
2. Query to find number of times an Oracle Disco Report has been run.
Thanks a ton in Advance
Arun

Hi Arun
The first place to look is to try running one of the pre-built workbooks created by Oracle for this purpose.
I see you are working in Apps mode. Therefore, you'll need to run both of these scripts when logged in as the owner of the EUL:
1. EUL5.SQL
2. EUL5_APPS.SQL
You will find both scripts in the $ORACLE_HOME/Discoverer/Util folder where your Discoverer Administrator tool is located.
Next, you will need to log into the Administrator tool and import this EEX file: EUL5.EEX
You will find the EEX file located in $ORACLE_HOME/Discoverer, again on the PC where Discoverer Administrator tool is located.
After you have imported the EUL, log into Desktop or Plus and open up the EUL5 workbook that you will now see in the list and work through the various worksheets. You should find one or two that will give you what you want.
Let us know how you get on
Best wishes
Michael
http://ascbi.com

HT2905 Any ideas on how to catch duplicates now that the option has been removed from the file dropdown?

So the new iTunes update removed the "Find Exact Duplicates" function. What's replaced it?

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

Why can't I access my pre order from iTunes when the album has been released?

Pre ordered the new Jay Z album from my iPhone 4S and have been FULLY charged for the album. Each song is showing "purchased" in grey. What's the deal with this? iTunes WILL allow me to purchase the album again, and I'm positive they'll take my money again.

I'm having the same issue. Support claims it's my computer to which I have downloaded 439 songs to already. Oddly enough I still can't download a previous preorder even though I am able to download FREE songs and podcast without issues. I asked them to cancel the order and they stopped contacting me with either a yay or a nay. It's not like they have to refund me or anything as they haven't drafted any monies yet. I guess I will have to chock this up as a loss and no longer purchase through iTunes anymore. Amazon is cheaper most of the time anyway. No back ups needed there. Peace.
Dell Optiplex GX620 Windows XP Pro

How to write testcases for a project which has been already developed

Hi all,
I am new to flex unit , whether i need to write testcase for all the classes in the project or i need to write according code flow of the project. I got confused .. help me guys ....
Thanks
karthy

You can create item inside your LOV region, set the item style to formValue. You can associate this to a View Object field. It can also act as mirror of any other text input field.
FormValue can hold the value and will not be diaplyed to user. You can read value from it controller
example
OAFormValueBean orgValue = (OAFormValueBean)webBean.findChildRecursive("OrgIdFormVal");
Or you can read it fro the VO associated with this form value.

My mini iPad is disabled due to kid trying passcode too many times; laptop used for setting the iPad has been rebooted; how can I enabled my iPad now?

Please help, and forward the answer to [email protected] as well.
Thanks.

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times.

Where should the Green Tick get displayed in digitally signed pdf files in whom the Signature has been validated ?

I have Windows 7 & Adobe 11 installed on my P.C (Apart from other Software) . Recently I downloaded Digitally Signed .pdf files & validated the Signature with Trust Certificates . However , the Green Tick Mark is coming on the left-hand side of a blue panel situated in-between the menu bar & the document . Shouldn't it be coming at the bottom right side of the document (Just above the name of the signatory) ? Is there anyway I can get the green tick to display at the bottom right side of the document or is this just the way the green tick gets displayed in current versions of adobe reader ?
This is the way it gets displayed on the top - left portion of the screen :
However , it does not get displayed in the below manner :

First of all, you need an app on the iPad that can read those files that you want to transfer. Adobe Reader and iBooks are two free apps that will read PDF files. Adobe Reader is much more robust than iBooks as it offers so many more features like renaming files, creating folders, annotating, highlights, etc.
Download Adobe Reader in the App Store. Then read this about file sharing with iTunes.
iOS: About File Sharing - Support - Apple
There are other ways to get files to the iPad, like email, DropBox and some other apps that let you mount your iPad like a flash drive.
This should be helpful as well.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad

The time limits on the parental controls do not work. Apple does not seem to know how to fix this issue since the problem has been going on since at least leopard.

The time limits in the parental controls do not work. I have several mac systems and they do not work on all of them. Also, I have had this problem since at least snow leopard and it is very frustrating that Apple is unable to fix a simple issue like this. All they have to do is somehow 'hard-wire' the time limits to the system clock but they are not listening. I used the feed-back feature in their support webpage and hopefully everybody else experiencing this issue will too. Thus, if they get a thousand notes on this issue they might listen and finally fix it.

Well, the whole system with those time limits are funky. Sometime this happens, sometime that happens. When the user is on the bed time limits do not work nor do the length of time limits. It is very frustrating as one of the reasons I bought an apple in the first place was those parental controls which did not exist in Windows prior to Windows 7. I do have a Windows 7 machine now and the bed time limits work there. Maybe you have a Windows 7 machine as well and can let them use it.

How to find from which table we r fetching the data

Hi friends,
i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
how to find from which table the field is fetched........
please tell me........
Regards
sridath

Dear Sridath,
In ST05 switch on the SQL Trace.
Goto RSA3.
Give your DataSource name > Execute
Goto ST05...Switch OFF the Trace
Analyze the Trace file
Gives you details about the fields and Tables from where you are fetching.
OR
Goto LBWE
Find your DataSource > Maintenance > Display mode
In right side window...expand ALL list box...
Exclude MC and take other words...they are the Source Tables.
Regards,
Ramkumar.

How to find from/for whom the mail has been bounced.

Similar Messages

Maybe you are looking for