How to find Logical database name using selection view

Hi Experts,
How can we find logical database name using selection view in se36.
Regards,
Mani

Hi,
If you want to see the logincal database used in the report ( tcode se38) in the intial screen select the attribute tab
and click display you will bw able to see the logical datbase ysed for the report.
Thanks.

Similar Messages

How to find out query name using Elements of the query builder.

Hi SDNers,
how to find out query name using Elements of the query .
thanks,
satyaa

Hi,
For having a look at the relation between BEx tables,check the link below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

How to find current database name i am using

what is the command to find current database name i am using

Dear user!
SELECT name
FROM v$database;Yours sincerely
Florian W.

How to know logical database supports Dynamic Selections

hi all,
1. Logical database KDF supports Dynamic Selections
2. How to know logical database 'KDF' supports Dynamic Selections

You might find an answer regarding dynamic 'WHERE' statements in standard SAP report SAPDBKDF

How to Find Logical Database with table name

Shankar

Version 4.6x
If you need to find the logical database for a table name, you can used SE36 - Logical Database Bulider.
Steps :-
Go to transaction SE36
Click Extras -> Table usage
Supply the Table name and hit enter.
A Display Logical Database will be shown on a pop-up windows.
Reward points if it is usefull ....
Girish

How to find the database name?

Hi,
I have a little problem with my database under DB2.
I acces this database through the ODBC with the name TESTALIAS, but the real name of the database is TEST. So what I need to find out is if there is a possibility to get the real name of the database.
I used the com.ibm.db.DatabaseConnection class for the connection, but there seems nothing to indicate me the real name of this database.
Have you any idea??? maybe another class that do this?
thanks,
alina

if somebody is interested in, the following SQL Statement gets the real database name out and not the alias:
SELECT CURRENT SERVER FROM one_table_name
I don't know if the register CURRENT SERVER work for all DB environment, but for DB2 ist does.
cheers,
alina

How to find out database name

Hi
can anyone please tell me how i can find out the database name for oracle8i.
thankyou very much in advance

I'm not expert in this, but your error has TNS in it which could mean its looking for the tnsnames.ora file which in an oracle client installation contains the mappings from the database name to the server ipaddress and port number for connection to oracle. Its possible you may need an oracle client installation.
Another way of connecting is via ODBC drivers which are configured in control panel in winnt and under computer managenent in win2000. An installation of Oracle will ususally install ODBC drivers.

How to find the package name using request number

I want to check the package name using the request no ,
Plz help me

Hi
You can use SE03 for the same. In that
Object Directory Node --> Change Object Directory Entries of Objects in a Request.
Dbclick on that and provide chield request and press F8 you will get the object with the package.
Hope this will Help.
Regards,
Hiren Patel

Logical database names

hi experts,
pls give me the main logical databases names used for taking reports using SAP query in sq02.
ex hr- pnp,material ckm etc

Hi
Check the tables related to LDB's
LDBS
LDBT
T0220
see the doc on LDB
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Reward points for useful Answers
Regards
Anji

How to defined which logical database to use in a function module?

Hey,
I am trying to do logical database in a function module. I need to know where do i go to define which logical database to use? Becuase i get syntax error on my Get statement. The logical database i am trying to use is HR PNP .
Any useful help will be appreciated,
Thanks

I think we can't assign logical database to FM or FG. Because there isn't any option to put the logical database in the FM or FG's attributes.
You must have to create a executable report to have the LDB in use.
Regards,
Naimesh Patel

How to find the database growth rate?

Wanted to do the forecasting of disk growth for one year. How to find the database growth rate?
Rahul

This is code authored by Richard Ding that will log database sizes to a table. If you run it every day, then you can go back and compare the database size differences day to day... week to week... month to month... and year over year. That is
how I forecast growth over time.
Note: There is a database name required that is local to your environment, so change [YOURDATABASENAME] to whatever local database you wish to use. I will also post the DDL to create the target table. Create that table in the database you
name in the stored procedure code and all should run fine.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[sp_SDS] Script Date: 04/22/2015 09:32:53 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[sp_SDS]
@TargetDatabase sysname = NULL, -- NULL: all dbs
@Level varchar(10) = 'Database', -- or "File"
@UpdateUsage bit = 0, -- default no update
@Unit char(2) = 'MB' -- Megabytes, Kilobytes or Gigabytes
AS
** author: Richard Ding
** date: 4/8/2008
** usage: list db size AND path w/o SUMmary
** test code: sp_SDS -- default behavior
** sp_SDS 'maAster'
** sp_SDS NULL, NULL, 0
** sp_SDS NULL, 'file', 1, 'GB'
** sp_SDS 'Test_snapshot', 'Database', 1
** sp_SDS 'Test', 'File', 0, 'kb'
** sp_SDS 'pfaids', 'Database', 0, 'gb'
** sp_SDS 'tempdb', NULL, 1, 'kb'
SET NOCOUNT ON;
IF @TargetDatabase IS NOT NULL AND DB_ID(@TargetDatabase) IS NULL
BEGIN
RAISERROR(15010, -1, -1, @TargetDatabase);
RETURN (-1)
END
IF OBJECT_ID('tempdb.dbo.##Tbl_CombinedInfo', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_CombinedInfo;
IF OBJECT_ID('tempdb.dbo.##Tbl_DbFileStats', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_DbFileStats;
IF OBJECT_ID('tempdb.dbo.##Tbl_ValidDbs', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_ValidDbs;
IF OBJECT_ID('tempdb.dbo.##Tbl_Logs', 'U') IS NOT NULL
DROP TABLE dbo.##Tbl_Logs;
CREATE TABLE dbo.##Tbl_CombinedInfo (
DatabaseName sysname NULL,
[type] VARCHAR(10) NULL,
LogicalName sysname NULL,
T dec(10, 2) NULL,
U dec(10, 2) NULL,
[U(%)] dec(5, 2) NULL,
F dec(10, 2) NULL,
[F(%)] dec(5, 2) NULL,
PhysicalName sysname NULL );
CREATE TABLE dbo.##Tbl_DbFileStats (
Id int identity,
DatabaseName sysname NULL,
FileId int NULL,
FileGroup int NULL,
TotalExtents bigint NULL,
UsedExtents bigint NULL,
Name sysname NULL,
FileName varchar(255) NULL );
CREATE TABLE dbo.##Tbl_ValidDbs (
Id int identity,
Dbname sysname NULL );
CREATE TABLE dbo.##Tbl_Logs (
DatabaseName sysname NULL,
LogSize dec (10, 2) NULL,
LogSpaceUsedPercent dec (5, 2) NULL,
Status int NULL );
DECLARE @Ver varchar(10),
@DatabaseName sysname,
@Ident_last int,
@String varchar(2000),
@BaseString varchar(2000);
SELECT @DatabaseName = '',
@Ident_last = 0,
@String = '',
@Ver = CASE WHEN @@VERSION LIKE '%9.0%' THEN 'SQL 2005'
WHEN @@VERSION LIKE '%8.0%' THEN 'SQL 2000'
WHEN @@VERSION LIKE '%10.0%' THEN 'SQL 2008'
WHEN @@VERSION LIKE '%11.0%' THEN 'SQL 2012'
WHEN @@VERSION LIKE '%12.0%' THEN 'SQL 2014'
END;
SELECT @BaseString =
' SELECT DB_NAME(), ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'CASE WHEN status & 0x40 = 0x40 THEN ''Log'' ELSE ''Data'' END'
ELSE ' CASE type WHEN 0 THEN ''Data'' WHEN 1 THEN ''Log'' WHEN 4 THEN ''Full-text'' ELSE ''reserved'' END' END +
', name, ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'filename' ELSE 'physical_name' END +
', size*8.0/1024.0 FROM ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'sysfiles' ELSE 'sys.database_files' END +
' WHERE '
+ CASE WHEN @Ver = 'SQL 2000' THEN ' HAS_DBACCESS(DB_NAME()) = 1' ELSE 'state_desc = ''ONLINE''' END + '';
SELECT @String = 'INSERT INTO dbo.##Tbl_ValidDbs SELECT name FROM ' +
CASE WHEN @Ver = 'SQL 2000' THEN 'master.dbo.sysdatabases'
WHEN @Ver IN ('SQL 2005', 'SQL 2008', 'SQL 2012', 'SQL 2014') THEN 'master.sys.databases'
END + ' WHERE HAS_DBACCESS(name) = 1 ORDER BY name ASC';
EXEC (@String);
INSERT INTO dbo.##Tbl_Logs EXEC ('DBCC SQLPERF (LOGSPACE) WITH NO_INFOMSGS');
-- For data part
IF @TargetDatabase IS NOT NULL
BEGIN
SELECT @DatabaseName = @TargetDatabase;
IF @UpdateUsage <> 0 AND DATABASEPROPERTYEX (@DatabaseName,'Status') = 'ONLINE'
AND DATABASEPROPERTYEX (@DatabaseName, 'Updateability') <> 'READ_ONLY'
BEGIN
SELECT @String = 'USE [' + @DatabaseName + '] DBCC UPDATEUSAGE (0)';
PRINT '*** ' + @String + ' *** ';
EXEC (@String);
PRINT '';
END
SELECT @String = 'INSERT INTO dbo.##Tbl_CombinedInfo (DatabaseName, type, LogicalName, PhysicalName, T) ' + @BaseString;
INSERT INTO dbo.##Tbl_DbFileStats (FileId, FileGroup, TotalExtents, UsedExtents, Name, FileName)
EXEC ('USE [' + @DatabaseName + '] DBCC SHOWFILESTATS WITH NO_INFOMSGS');
EXEC ('USE [' + @DatabaseName + '] ' + @String);
UPDATE dbo.##Tbl_DbFileStats SET DatabaseName = @DatabaseName;
END
ELSE
BEGIN
WHILE 1 = 1
BEGIN
SELECT TOP 1 @DatabaseName = Dbname FROM dbo.##Tbl_ValidDbs WHERE Dbname > @DatabaseName ORDER BY Dbname ASC;
IF @@ROWCOUNT = 0
BREAK;
IF @UpdateUsage <> 0 AND DATABASEPROPERTYEX (@DatabaseName, 'Status') = 'ONLINE'
AND DATABASEPROPERTYEX (@DatabaseName, 'Updateability') <> 'READ_ONLY'
BEGIN
SELECT @String = 'DBCC UPDATEUSAGE (''' + @DatabaseName + ''') ';
PRINT '*** ' + @String + '*** ';
EXEC (@String);
PRINT '';
END
SELECT @Ident_last = ISNULL(MAX(Id), 0) FROM dbo.##Tbl_DbFileStats;
SELECT @String = 'INSERT INTO dbo.##Tbl_CombinedInfo (DatabaseName, type, LogicalName, PhysicalName, T) ' + @BaseString;
EXEC ('USE [' + @DatabaseName + '] ' + @String);
INSERT INTO dbo.##Tbl_DbFileStats (FileId, FileGroup, TotalExtents, UsedExtents, Name, FileName)
EXEC ('USE [' + @DatabaseName + '] DBCC SHOWFILESTATS WITH NO_INFOMSGS');
UPDATE dbo.##Tbl_DbFileStats SET DatabaseName = @DatabaseName WHERE Id BETWEEN @Ident_last + 1 AND @@IDENTITY;
END
END
-- set used size for data files, do not change total obtained from sys.database_files as it has for log files
UPDATE dbo.##Tbl_CombinedInfo
SET U = s.UsedExtents*8*8/1024.0
FROM dbo.##Tbl_CombinedInfo t JOIN dbo.##Tbl_DbFileStats s
ON t.LogicalName = s.Name AND s.DatabaseName = t.DatabaseName;
-- set used size and % values for log files:
UPDATE dbo.##Tbl_CombinedInfo
SET [U(%)] = LogSpaceUsedPercent,
U = T * LogSpaceUsedPercent/100.0
FROM dbo.##Tbl_CombinedInfo t JOIN dbo.##Tbl_Logs l
ON l.DatabaseName = t.DatabaseName
WHERE t.type = 'Log';
UPDATE dbo.##Tbl_CombinedInfo SET F = T - U, [U(%)] = U*100.0/T;
UPDATE dbo.##Tbl_CombinedInfo SET [F(%)] = F*100.0/T;
IF UPPER(ISNULL(@Level, 'DATABASE')) = 'FILE'
BEGIN
IF @Unit = 'KB'
UPDATE dbo.##Tbl_CombinedInfo
SET T = T * 1024, U = U * 1024, F = F * 1024;
IF @Unit = 'GB'
UPDATE dbo.##Tbl_CombinedInfo
SET T = T / 1024, U = U / 1024, F = F / 1024;
SELECT DatabaseName AS 'Database',
type AS 'Type',
LogicalName,
T AS 'Total',
U AS 'Used',
[U(%)] AS 'Used (%)',
F AS 'Free',
[F(%)] AS 'Free (%)',
PhysicalName
FROM dbo.##Tbl_CombinedInfo
WHERE DatabaseName LIKE ISNULL(@TargetDatabase, '%')
ORDER BY DatabaseName ASC, type ASC;
SELECT CASE WHEN @Unit = 'GB' THEN 'GB' WHEN @Unit = 'KB' THEN 'KB' ELSE 'MB' END AS 'SUM',
SUM (T) AS 'TOTAL', SUM (U) AS 'USED', SUM (F) AS 'FREE' FROM dbo.##Tbl_CombinedInfo;
END
IF UPPER(ISNULL(@Level, 'DATABASE')) = 'DATABASE'
BEGIN
DECLARE @Tbl_Final TABLE (
DatabaseName sysname NULL,
TOTAL dec (10, 2),
[=] char(1),
used dec (10, 2),
[used (%)] dec (5, 2),
[+] char(1),
free dec (10, 2),
[free (%)] dec (5, 2),
[==] char(2),
Data dec (10, 2),
Data_Used dec (10, 2),
[Data_Used (%)] dec (5, 2),
Data_Free dec (10, 2),
[Data_Free (%)] dec (5, 2),
[++] char(2),
Log dec (10, 2),
Log_Used dec (10, 2),
[Log_Used (%)] dec (5, 2),
Log_Free dec (10, 2),
[Log_Free (%)] dec (5, 2) );
INSERT INTO @Tbl_Final
SELECT x.DatabaseName,
x.Data + y.Log AS 'TOTAL',
'=' AS '=',
x.Data_Used + y.Log_Used AS 'U',
(x.Data_Used + y.Log_Used)*100.0 / (x.Data + y.Log) AS 'U(%)',
'+' AS '+',
x.Data_Free + y.Log_Free AS 'F',
(x.Data_Free + y.Log_Free)*100.0 / (x.Data + y.Log) AS 'F(%)',
'==' AS '==',
x.Data,
x.Data_Used,
x.Data_Used*100/x.Data AS 'D_U(%)',
x.Data_Free,
x.Data_Free*100/x.Data AS 'D_F(%)',
'++' AS '++',
y.Log,
y.Log_Used,
y.Log_Used*100/y.Log AS 'L_U(%)',
y.Log_Free,
y.Log_Free*100/y.Log AS 'L_F(%)'
FROM
( SELECT d.DatabaseName,
SUM(d.T) AS 'Data',
SUM(d.U) AS 'Data_Used',
SUM(d.F) AS 'Data_Free'
FROM dbo.##Tbl_CombinedInfo d WHERE d.type = 'Data' GROUP BY d.DatabaseName ) AS x
JOIN
( SELECT l.DatabaseName,
SUM(l.T) AS 'Log',
SUM(l.U) AS 'Log_Used',
SUM(l.F) AS 'Log_Free'
FROM dbo.##Tbl_CombinedInfo l WHERE l.type = 'Log' GROUP BY l.DatabaseName ) AS y
ON x.DatabaseName = y.DatabaseName;
IF @Unit = 'KB'
UPDATE @Tbl_Final SET TOTAL = TOTAL * 1024,
used = used * 1024,
free = free * 1024,
Data = Data * 1024,
Data_Used = Data_Used * 1024,
Data_Free = Data_Free * 1024,
Log = Log * 1024,
Log_Used = Log_Used * 1024,
Log_Free = Log_Free * 1024;
IF @Unit = 'GB'
UPDATE @Tbl_Final SET TOTAL = TOTAL / 1024,
used = used / 1024,
free = free / 1024,
Data = Data / 1024,
Data_Used = Data_Used / 1024,
Data_Free = Data_Free / 1024,
Log = Log / 1024,
Log_Used = Log_Used / 1024,
Log_Free = Log_Free / 1024;
DECLARE @GrantTotal dec(11, 2);
SELECT @GrantTotal = SUM(TOTAL) FROM @Tbl_Final;
INSERT INTO [YOURDATABASENAME].[dbo].[DBSize]
([Weight]
,[DBName]
,[Used]
,[Free]
,[Total]
,[Data]
,[Data_Used]
,[Log]
,[Log_Used]
,[DT])
SELECT
CONVERT(dec(10, 2), TOTAL*100.0/@GrantTotal) AS 'WEIGHT (%)',
DatabaseName AS 'DATABASE',
CONVERT(VARCHAR(12), used) AS 'USED',
CONVERT(VARCHAR(12), free) AS 'FREE',
TOTAL,
CONVERT(VARCHAR(12), Data) AS 'DATA',
CONVERT(VARCHAR(12), Data_Used) AS 'DATA_USED',
CONVERT(VARCHAR(12), Log) AS 'LOG',
CONVERT(VARCHAR(12), Log_Used) AS 'LOG_USED',
GETDATE()
FROM @Tbl_Final
WHERE DatabaseName LIKE ISNULL(@TargetDatabase, '%')
ORDER BY DatabaseName ASC;
IF @TargetDatabase IS NULL
SELECT CASE WHEN @Unit = 'GB' THEN 'GB' WHEN @Unit = 'KB' THEN 'KB' ELSE 'MB' END AS 'SUM',
SUM (used) AS 'USED',
SUM (free) AS 'FREE',
SUM (TOTAL) AS 'TOTAL',
SUM (Data) AS 'DATA',
SUM (Log) AS 'LOG'
FROM @Tbl_Final;
END
RETURN (0)
GO
USE [YOURDATABASENAME]
GO
/****** Object: Table [dbo].[DBSize] Script Date: 04/22/2015 09:49:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[DBSize](
[UID] [int] IDENTITY(1,1) NOT NULL,
[Weight] [decimal](18, 2) NULL,
[DBName] [varchar](250) NULL,
[Used] [decimal](18, 2) NULL,
[Free] [decimal](18, 2) NULL,
[Total] [decimal](18, 2) NULL,
[Data] [decimal](18, 2) NULL,
[Data_Used] [decimal](18, 2) NULL,
[Log] [decimal](18, 2) NULL,
[Log_Used] [decimal](18, 2) NULL,
[DT] [datetime] NULL,
CONSTRAINT [PK_DBSize] PRIMARY KEY CLUSTERED
[UID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
 fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 layout TYPE slis_layout_alv,
 variant TYPE disvariant,
 events TYPE slis_t_event WITH HEADER LINE,
 heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
 wa_usertcode TYPE swncaggusertcode,
 wa TYPE zusertcode,
 t_ut TYPE STANDARD TABLE OF zusertcode,
 wa_result TYPE zusertcode,
 t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
 EXPORTING
 component = 'TOTAL'
 ASSIGNDSYS = 'DEV'
 periodtype = 'M'
 periodstrt = month
 TABLES
 usertcode = t_usertcode
 EXCEPTIONS
 no_data_found = 1
 OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
 wa-user = wa_usertcode-account.
 IF wa_usertcode-entry_id+72 = 'T'.
 wa-tcode = wa_usertcode-entry_id.
 wa-report = space.
 ELSE.
 wa-tcode = space.
 wa-report = wa_usertcode-entry_id.
 ENDIF.
 COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
 text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
 text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
 text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
 text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-cprog
 is_layout = layout
 it_fieldcat = fcat[]
 i_save = 'A'
 is_variant = variant
 it_events = events[]
 TABLES
 t_outtab = t_ut
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA

How to find the screen name in a screen?

Hello experts
I am using loop at screen to make my selection screen dynamic
please tell me how to find all screen-name of a screen.
thanks in advance.
Chitta Ranjan Mahato
Moderator message: please think about it before asking, you are naming the selection fields yourself in your program, if still in doubt, just debug your "loop at screen"
Edited by: Thomas Zloch on Nov 9, 2010 12:57 PM

I am writing a program where in selection screen there will be two radio button named application server and presentation server when user choose application server screen changes dynamically and the block containg related to appliction server will be displayed in selection screen. to achieve this i have write code like
at selection-screen output.
if <radiobutton-name> = 'X'.
loop at screen.
{color:green}
if screen-name = 'radiobutton-name'.
{color}
if scree
thanks
chitta ranjan mahato

How to find Logical database name using selection view

Similar Messages

Maybe you are looking for