How to find optimal timeout period for trans-timeout-seconds element.

we are using Weblogic 7.0 Integration Studio,in one workflow we got "weblogic.transaction.internal.TimedOutException" and the exception text is "Transaction timed out after 1089 seconds".
Presently we are using timeout period as 1089 seconds.
On what basis the timeout period for transactions is specified, i.e. how the value of the <trans-timeout-seconds> is set in weblogic-ejb-jar.xml file?
Is there any method to find the optimal value?

You should base this on the average time your transaction typically takes. It would have to factor in the type of backend systems that you are connecting too, the type of work you are doing and any network etc issues.
Typically 1089 seconds seems like it should be more then ENOUGH.
Kunal Mittal

Similar Messages

How to find optimal multi splits for numerical attributes in Decision Tree

Hi experts,
I would like to know how to find optimal multi splits for numerical attributes
in Decision Tree Learning.
For splitting categorical attributes, gini and gain index are used and the splits that
produce the best gain are selected.
However, in case of numerical attributes
how do you find the best splits?????
Please help me !!

Yordan's suggestion is correct, though the documentation is a bit outdated.
You can use the single parameter + sweeper mode or define your own custom ranges in the BDT module with the Parameter Range setting
Regards,
aK

How to find next number range for project definition in tcode CJ20N

Hai Experts,
Please help me 'How to find next number range for project definition in tcode "CJ20N". I was trying in function module NUMBER_GET_NEXT. Is it right function module? If its right what input i need to give for this tcode and for the field project definition?
Note: I searched in forum before posting, but couldn't find the solution.
Thanks
Regards,
Prabu S.

Hi,
For project defination internal number is assigned by system.
When you saves's project then system allocate one number to project defination, you can view it,
SE11 >>> table PROJ >> Click on contents >>> execute,
here you will get your project defination & number is assigned to project defination.
kapil

How to find classtype and class for a material.

Hi,
How to find classtype and class for a material.
which table contains this data.
Thanks
Kiran

Hi Kiran,
Check below sample code. Use this BAPI which will give all info about the class for the material.
DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                     VALUE IS INITIAL.
CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                     VALUE 'MARA',
             lc_classtype_imp   TYPE bapi1003_key-classtype
                                     VALUE '001',
             lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                     VALUE 'FREIGHT_CLASS',
             lc_e               TYPE bapiret2-type VALUE 'E',
             lc_p(1)            TYPE c             VALUE 'P',
             lc_m(1)            TYPE c             VALUE 'M'.
SORT i_deliverydata BY vbeln posnr matnr.
CLEAR wa_deliverydata.
LOOP AT i_deliverydata INTO wa_deliverydata.
    REFRESH: i_alloclist[],
             i_return[].
    CLEAR:   l_objectkey_imp.
    l_objectkey_imp = wa_deliverydata-matnr.
*Get classes and characteristics
    CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
      EXPORTING
        objectkey_imp         = l_objectkey_imp
        objecttable_imp       = lc_objecttable_imp
        classtype_imp         = lc_classtype_imp
*   READ_VALUATIONS       =
        keydate               = sy-datum
        language              = sy-langu
      TABLES
        alloclist             = i_alloclist
*   ALLOCVALUESCHAR       =
*   ALLOCVALUESCURR       =
*   ALLOCVALUESNUM        =
        return                = i_return
Thanks,
Vinod.

How to find out the Tcodes for the exits

Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
                          EXIT_RFEKA400_001
                          EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
                   USEREXIT_FIELD_MODIFICATION
                   USEREXIT_MOVE_FIELD_TO_VBAK
                   USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
          HISTORICAL_VALUES
          MD_ADD_ELEMENTS
          MD_CHANGE_MRP_DATA
          MD_PIR_FLEX_CONS
          MD_PLDORD_POST
          ME_REQ_POSTED
          NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

i have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong!

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to find out the description for the given field?

Hi All,
How to find out the description for the given field?
I mean ETTYP Desription is VTEXT. This we can find in TVEPT Table. So, How canwe find this?
Thanks in Advance
Sri...

Hi Avi,
If i want to disply the fields like AUART and 'Description of AUART',
Suppose based on my query i will take AUART from T184 table. And the description of AUART is available in TVAKT table.
my question is if i have given T184-AUART and how do u find out AUART Description ?(How do u know which table is having Description of AUART)?
Thanks in Advance
Sri...

URGENT: How to find out the Tables for Routines in BW.

Hi BW Gurus,
How to find out the Tables for Routines in BW.
I have this routine id <b>45XFAEI7LKIFIRDUKQG127YWW</b> and it is in inactive state and i want to activate it.
thanks in advance,
points will be rewarded.
Regards,
Maruthi.

Hi Maruthi,
Check table RSUPDROUT using the routine id as input for the field CODEID. You will get the technical name of the update rule.
Cheers,
Praveen.

How to find out the link for the tables for sub contract PO

Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.

Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to find the workflow admins for all costcenters ?

Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinu

hi
I have not received any thing.Please send again
[email protected]
[email protected]

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

How to find the search help for the parameters stmt in a report

hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful.

How to find the creation date for a released requests..

Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..

hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod

HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO

제품 : MFG_PO
작성날짜 : 2003-05-14
HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO
===============================================
PURPOSE
This solution is for Oracle Purchasing 11 and higher
Explanation
1. Start a SQL*Plus session using the APPS schema.
2. Run the following script and enter the Purchase Order number that is stuck
in process when prompted for the PO_NUMBER:
     SELECT WF_ITEM_TYPE, SUBSTR(WF_ITEM_KEY,1,25) "WF_ITEM_KEY"
     FROM PO_HEADERS_ALL
     WHERE AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
3. If more than one row is returned, then run the following script and only
refer to the row that contains the OPERATING_UNIT_NAME that equals the
operating unit name tied to the responsibility used when the Purchase Order was
discovered as being stuck in process.
     SELECT SUBSTR(WF_ITEM_TYPE,1,12) "WF_ITEM_TYPE",
     SUBSTR(WF_ITEM_KEY,1,15) "WF_ITEM_KEY",
     SUBSTR(NAME,1,35) "OPERATING_UNIT_NAME"
     FROM PO_HEADERS_ALL PA, HR_ORGANIZATION_UNITS OU
     WHERE PA.ORG_ID=OU.ORGANIZATION_ID
     AND AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
Example
Reference Documents
-------------------

Hi Kishore,
Welcome to SCN!
to find the sales order from Purchase order , go to SE16, Enter the table name as VBAK and press Enter.
In BSTNK field of VBAK, Enter the Purchase order number. System will return you corresponding sales order.
Hope this will help you.
Regards,
Nikhil

How to find optimal timeout period for trans-timeout-seconds element.

Similar Messages

Maybe you are looking for