How to find out my mottherboard number?

Hello everybody! I have a laptop HP 630 and i have a problem with my motherboard. I contacted HP support and they gave me a solution, to replace it. The gave me a case number, and this number i had to gave their partners here in Albania. And so i did, i went to them i told what was the problem. They said ok, made the order and said about 10 days because the shipment comes from holland. All i know is there any way how to prove that the motherboard will be replaced? I ask this because here in Albania things are not very serious, you can not believe that what is said is done!
Thanks!

Get a program called Speccy, it can tell you this.

Similar Messages

How to find out Inquiry document number in sales quotation

Hi all
my client have requirement that while creating quotation with reference to inquiry number the system should copy inquiry number in sales quotation it should be save into any particulates field so base on that he can configure output determination can any one help me how to find out Inquiry document number in sales quotation and what are the config step i need to do
Thanks and regards
rajesh

Hi raj
Firstly , In Sales header data you can see the preceding document feild but i am not sure in which tab .
Secondly, As far as document flow is concerned go to VA22 and then you will get the document number of the quotation and at the top you will get one small icon which is document flow , but i am, not sure with the shortcut but just check with Shift +F2. then you can see the flow
Regards
Srinath

How to find out the Idoc number triggered for any material transfer frm SAP

Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.

Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish

How to find out the IDOC number(urgent)

hello every one,
i had recived all the data to BW from R/3 but the request is still running in the system
for this <b>i need to manually release the IDOC for BD87</b>
can any one please help me <b>How to find out the Idoc Number in R/3 and In BW for the particular load</b>
Regards
Sandy

hi Siva,
thanks for ur valuable answer,
it is showing IDoc num for the succeeded one....
my present error is Data pack 1 got error and Datapack 2 was success,
their 3IDocs are their in detail tab all are success
as per my knowledge it will for the Data pack 2 and it is showing 3different
how can i find the Idoc which was struck .....
that need to process manually in BD87..
please suggest if i am wrong
Regards
Sandy

How to find out Transfer requirement number rom Transfer order

How to find out Transfer requirement number rom Transfer order
I have a TO number, I need to find out the relevant TR number.
Is there a way to directly find out?
OR
Is there a table where I can check.
Regards
Alex

Hi
I think the table will be either LQUA or LTAP but if you display the TO and drill down in to it you will find the TR number and by using F1 on the TR number field you will find the correct table that contains the data.
I hope that this helps
Frenchy.

How to find out my four number password for iphone4, how to find out my four number password for iphone4

how to find out my four number password for iphone4, how to find out my four number password for iphone4

There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.
There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.

How to find out the n number of records inserted??

In File to JDBC Scenarios, i am inserting n records in Oracle.
How to find out the n number of records inserted??

Hi,
If you are using the statement "UPDATE_INSERT", get the response on element <insert_count>count</insert_count>. It will give you the inserted rows.
This link can be very helpfull.
[http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/frameset.htm]
regards.
roberti

How to find out total of number of users accessing Hyperion Planning applications ?

Hi All,
Could someone help me with the details of how to find out total number of users who are accessing Hyperion Planning application in Env.?
This is with regard to licenses so wanted accurate and unique information,
Thanks
Amith

Hello Amith,
I think you should have a look at the blog of Cameron Lackpour http://camerons-blog-for-essbase-hackers.blogspot.be/
In the "Shared Services Stupid Trick" blogs, he shows how to find the real access to an application. The side benefit is that it is amusing to read.
In how far this is OK for the licenses is written on another page. You likely need to use the same method as Oracle does. Ask the Salesperson how to do this. (I am curious what his/her reply is).
Regards,
Philip Hulsebosch.

How to find out spool requist number respective Sales Order

hi,
I need spool number respective to Sales Order, after print out script.While taking print out of sales order by selecting respective output type i am able to get spool request number in table TSP01 .Upto eveything fine .But how to find this spool request number is belongs to that Sales order.
Regards,
Eswar

SELECT * FROM tsp01 WHERE
             rq0name = sy-repid AND
             rq1name = d_suffix1 AND
             rq2name = d_suffix2 AND
             rqowner = sy-uname.
          WRITE:/ 'Spool request issued',
                / 'Spool Number:', tsp01-rqident,
                / 'Spool Name :', tsp01-rq0name,
                / 'Suffix 1    :' , tsp01-rq1name,
                / 'Suffix 2    :', tsp01-rq2name,
                / 'Owner       :', tsp01-rqowner,
                / 'Device      :',tsp01-rqdest,
                / 'Copies      :', tsp01-rqcopies,
                / 'Processed   :', tsp01-rqpjreq.
          SKIP.
        ENDSELE

How to find out the serial number of a connected AP

Hi.
We are using Cisco Prime Infrastructure Manager 2.0
My question is: Is there a possibility to find out the serial number of a connected AP?
Regards
Markus

Hi Markus,
I don't think ,there is any report which can help to get the serial no of AP.
Inventory( Report >Report Launch Pad> Inventory) is the ONLY report which gave the below information but NOT the serial no .
Inventory
This report allows you to generate inventory-related information for controllers, access points, and MSEs managed by Prime Infrastructure. This information includes hardware type and distribution, software distribution, CDP information, and other statistics.
*** If anyone knows more deatils on this ,please share with us ***
Thanks-
Afroz
[Do rate the useful post]

My laptop was stolen - How to find out the serial number

Hi
Is there any way I can find out the serial number of my laptop, which was stolen yesterday? I'd like to log it as stolen with Toshiba but they ask for the serial number.
Tnx
Andy

Hi
Usually the serial number was placed at the bottom of the unit.
There is a label which collects all these useful informations.
You have certainly received many documents with you notebook; i.e. warranty.
Check it and maybe you will find the serial number somewhere in the list

How to find out the current number of rows in a form without navigation

Hi.
Is there any way to count the rows in a form (block) without navigation to the last record?
I am modifying CUSTOM.pll and have to count the rows before user commits changes.
All records are new in this case. Can anyone halp me? Thanks.
Regards
Tomáš

Magoo wrote:
no, such a block-property ^unfortunately^ does not exists.
you can just go to to the block, call the last_record build-in and find out, where the cursor is.
But with this you call restrictred procedures and their are not everywhere allowed ...
If you execute a query on a block, may not all records getting retrieved from database.
For this forms does not know, how many records are really in the block and
for this there is no build-in like get_block_property ( records_count ).It does exist indeed. GET_BLOCK_PROPERTY('BLOCK',QUERY_HITS);
Of course, this will return the number of records that would get fetched to the block (based on the where condition), but not the records with NEW status (i.e new records which are not yet committed).
-Arun

How to find out the serial number of Satellite M30x

Over time the serial number has worn away from the bottom of my Toshiba Satellite M30x. Is there any other way I can find out what this is?

Hello,
you want to know your serial number / model number but the sticker/manual got lost?
Here is the solution:
All of these informations are stored in the DMI of your BIOS and can be read easily with a tool called DMIviewer. (size 146kb)
This utility can NOT harm your notebook in any way as it is made to READ (VIEW) the DMI only compared to other tools that can do changes aswell.
It also runs right out of the box without the need for an installation... a must have utility for everybody ;)
You can download it by clicking the link below:
http://anonym.shareinside.net/?http://tinyurl.com/yuded9
After you run the file, click on <DMI--System information (Type-1)> ... here is your info :)
also check out the entries in <DMI--System Board information (Type-2) for the mainboard serial number.
Regards
electrochain

How to find out Satellite Model number

Hi
I have a Satellite laptop however the model has rubbed off the back of the laptop and I do not have anyway to find out what model it is as I need to update some drivers.
Any ideas?
thanks
Jamie

You can view the model number in the Toshiba PC Diagnostic Tool. Its located in the Start Menu under Toshiba->Utilities.

How to find out the page number a cell is on

Hi folks,
after importing a XML table into an InDesign document and autofilling it, I need a way to find the page a specific table cell is on.
I tried to iterate over all cells but it seems that there is no property or so, which tells me which page the current cell is on.
I really would appreciate any hints how I could tackle this problem...
TYIA
Carsten

@Carsten – try the following:
myPageNumberStartingWithZero = myCell.texts[0].insertionPoints[0].parentTextFrames[0].parentPage.documentOffset;
Instead of a number, you could also ask for the "name" property of the parentPage. But this might not be unique…
Uwe

How to find out my mottherboard number?

Similar Messages

Maybe you are looking for