How to find out the systems under a logical system?

Hi,
Is their any table in SAP so that we can see the the systems under a Logical System, I need to check it in production where i dint have the access for SCC4 ,SM59 and SPRO.
I also checked in all *Log*Sys* Tables but find nothing.

Hi Pranjal,
I don't think if there is such a table to give you mapping of the logical groups and the connectors associated with the same. Would like to know if there is any as such
As Alessandro suggested, GRACCONNSTAT is the only table on this context.
Ameet

Similar Messages

HOw to find out the RFC destination from BW system to ISU

Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
Krishna

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

How to find out the password of system?

Dear all,
I would like to know how to find out the password of system as I forgot it?
Thanks a lot
Francis SZE

Since oracle passwords are encrypted so you cant see actual password. But you can use following procedure to login to oracle with system user.
For any account issue this statement.
select username,password from dba_users where username='SYSTEM';
EMDU27ANS729273
this will give you the password in encrypted format.
Now you can change that password for temporary purpose.
alter user system identified by test;
Now login and do your work.
After login you can issue this statement to reset the password to its original value.
Alter user system identified by values 'EMDU27ANS729273';
You have to enter the same encrypted password in the quoted string which you had found in 1st statement.
Cheers.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

How to find out the IBM XL C/C++ compiler Version in EBS

I have Referred the note
1294357.1 - New Oracle E-Business Suite R12 Operating System and Tools Requirements on IBM AIX on Power Systems
Please let me know the correct command to find out the IBM XL C/C++ compiler version in EBS
lslpp -l | grep vacpp
vacpp.cmp.rte             9.0.0.14 COMMITTED IBM XL C/C++ Compiler
vacpp.cmp.tools           9.0.0.14 COMMITTED IBM XL C/C++ Tools
vacpp.memdbg.aix52.rte    9.0.0.14 COMMITTED IBM XL C/C++ User Heap/Memory
vacpp.memdbg.rte          9.0.0.14 COMMITTED IBM XL C/C++ User Heap and
From the above command Compiler version is showing as 9.0.0.14 Is it correct command to check the IBM XL C/C++ compiler version?
(Or)
lslpp -l | grep -i xlC
xlC.aix61.rte             11.1.0.2 COMMITTED XL C/C++ Runtime for AIX 6.1
xlC.cpp                    9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.rte                   11.1.0.2 COMMITTED XL C/C++ Runtime
xlC.sup.aix50.rte          9.0.0.1 COMMITTED XL C/C++ Runtime for AIX 5.2
From the above command how will identify the IBM XL C/C++ compiler version?

Hi Hussain
Thanks for the Reply
Yes i have reviewd the above note Just i want to know the command that im using to find out the the IBM XL C/C++ compiler Version
Below is the correct command ?We are planning to install new version of Complier 11 .
But im confused to find out the current Version in my system the below command shows 9.0.0.14 is IBM XL C/C++ Compiler is it the compiler version on my system?
lslpp -l | grep vacpp
vacpp.cmp.rte             9.0.0.14 COMMITTED IBM XL C/C++ Compiler
vacpp.cmp.tools           9.0.0.14 COMMITTED IBM XL C/C++ Tools
vacpp.memdbg.aix52.rte    9.0.0.14 COMMITTED IBM XL C/C++ User Heap/Memory
vacpp.memdbg.rte          9.0.0.14 COMMITTED IBM XL C/C++ User Heap and

How to find out the tables related to CRM datasources?

How to find out the tables related to CRM datasources? For example, the table related to 0CRM_OPPT_H.
Regards,
R.Ravi

Hi Ravi,
To find out all tables used go into the CRM source system to transaction RSA3 and prepare the selections for extraction of your datasource.
In a parallel session execute transaction ST05 and press the button 'Activate Trace'
Go back to the extracor checker and execute the extraction.
Switch sessions and subsequently 'Deactivate Trace' and 'Display Trace'.
This will list all tables used.
regards,
Olav

How to find out the max mem can be allocatedTT for 32 bit Win ?

How to find out the maximum Permanent Data Size and Temporary Data Size that can be allocated for the Oracle Times Ten for 32 bit Windows OS.

Hi Chris,
Am I write in saying that this also depends on shared memory setting as well?
If that is the case, on a platform like window 2003 32-bit, one cannot have more than 4GB of shared memory. Windows Server 2003 includes support for a startup switch (entered in the boot.ini file) that allows the allocation of memory and memory address space. Regardless of the amount of physical memory that is installed on the system, the operating system uses a virtual address space of 4 GB. Out of that amount, by default, 2 GB is allocated to user-mode processes (for example, Oracle or TimesTen) and 2 GB is allocated to kernel-mode processes (for example the operating system and others). In a nutshell on systems that have more than 1 GB of RAM, this startup switch can be used to allocate more memory to applications (3 GB) and less memory to the operating system (1 GB). However, adding adding the /3GB switch to the boot.ini file will not increase the amount of physical RAM memory, the 3GB switch just tells the computer to allocate the existing memory space differently.
For a 32-bit TimesTen the limit on memory cannot be more than 2GB (PermSize+TempSize). For example on Linux 32-bit I have 1024MB and 512MB for these two parameters.
Thanks,
Mich

How to find out the exact culpirit session

How to find out the exact culpirit client machine process to kill the session and release.
Thanks,

We can not directly solve this mystery, only you can do so.
V$SESSION contains data for all connected sessions.
If no unique combination of fields exists that allows you to identify the culprit client session, then you are out of luck.
See you started this thread with the premise that 1 session connected to the DB is a problem.
OK, we will accept this as being true.
Now via SQL how/what can you SELECT so that only 1 row is returned & that row corresponds to "problem client" session?
Since this is YOUR system & not ours, only you can solve this mystery.

How to find out the batches released from ASCP

hello gurus,
Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
Thanx & Regards

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

How to find out the tables that will be affected using a transaction

Hi,
How to find out the list of database tables that will be affected when we use a standard transaction(ex. VA01, MM01..)...?(like When we create a salesorder, which tables and which fields will be affected..?)
Is there any transaction or a simple way to find out the solution?
Thanks,
Pradeep.

Hi,
Give transaction code and in menu(system- status), double click onthe Program name.
Check in TOP INCLUDE - you will find all the tables related to that transaction.
Thanks,
Anitha

How to make use of SE37- Function Module & how to find out the table?

Hi ,
1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
But after giving the particular name what should i do?
Please help me.
2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
Thanks in adavnce for spending some time
Raj.S

Hi Raj
Function Modules
Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
The Function Builder also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
Check this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

How to find out the rows inserted between a time period.

Hi,
Please help me to solve this.
Table - emp.
Colmns - empno(Primary Key),ename, mgr
How to find out the rows inserted between a time period.
For eg:- Between 02-Oct-2006 1 PM and 03-Oct-2006 2 PM.
regards,
Mathew.

Hi,
Maybe work:
For each row, ORA_ROWSCN returns the conservative upper bound system change number (SCN) of the most recent change to the row. This pseudocolumn is useful for determining approximately when a row was last updated. It is not absolutely precise, because Oracle tracks SCNs by transaction committed for the block in which the row resides
e.g.:
SGMS@ORACLE10> create table test(cod number);
Table created.
SGMS@ORACLE10> insert into test values (1);
1 row created.
SGMS@ORACLE10> insert into test values (2);
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> insert into test values (3);
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> select SCN_TO_TIMESTAMP(ora_rowscn),ora_rowscn,cod from test;
SCN_TO_TIMESTAMP(ORA_ROWSCN)       ORA_ROWSCN        COD
06/11/06 08:56:56,000000000         727707205          1
06/11/06 08:56:56,000000000         727707205          2
06/11/06 08:57:05,000000000         727707210          3Cheers

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

How to find out the infospoke name for an existing infoobject?

Hi,
Could any one pls tell me how to find out the existing infospoke name for an infoobject?
i've tried with where used list but its not coming....can any one pls suggest
Thanks,
Suri

Hi,
Check in metadata repository for that infoObject.
If you are still not able to identify, goto RSBO tx and press F4.
You will get the list of Infospokes available.
Go in each and chk from the General Tab, if the infoObject is available in the source system.
Regards,
Balaji V

How to find out the systems under a logical system?

Similar Messages

Maybe you are looking for