How to find out to find by which procedure a table column was updated

Hi All,
We have an attribute10 column of a table used in a DFF.
This attribute is being updated for a specific reason in a code, but some other procedure is also updating the same column which is causing issue with the functionality. The update might be using an API or some other way.
Can anyone help me with a query or some other way to in find out the procedures which might be updating a particular column (attibute10) of that table.
Regards,
Shruti

Shruti,
If you can replicate in non-production environment, one way is to create an update trigger on the table/column,and have the trigger do something with any environmental info you can query (select SYS_CONTEXT('USERENV','OS_USER'), etc.) and write it using utl_file or insert it into a custom table. Perhaps have the trigger enable trace, query the above and disable trace.
-Vince

Similar Messages

How do I find out the date in which I registered my imac?

How do I find out the date in which I registered my imac?

It doens't really matter what date you registered it. However if you are looking to see when your expiration on AppleCare is/was it is 3 years from the original date of purchase. You can use the Apple Online Service Assistant afer you input the serial number click the link that says See your service and support coverage.

How can I find out the iCloud ID which is registered with my iPhone?

How can I find out the iCloud ID which is registered with my iPhone? I dont know which ID is actually registered with my phone Please help me

Someone logged into iCloud with his ID maybe my friend or someone but if I get the email info then I can tell him to remove the lock. The ID is started with s*****@hotmail.com. I already asked few of my friends whos name started with s but still didnt find the right one What can I do now?

How to find out my 5 computers which have been authorized for Itunes.

How to find out my 5 computers which have been authorized for Itunes.

Sorry, but you can't. You can, however, log into your iTunes Store and use the "deauthorize all" command and then reauthorize the computers you're using now.
Regards.

How can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?

Hi All,
Do you guys know how can I find out who created or which id created the Essbase app. Is there any file where can i go and check to see?
I am on UNIX and 11.1.2.2
Thanks all.

Don't think that information is kept anywhere.
This is how the log will look like during app and db creation
[Fri Aug 02 13:35:55 2013]Local/ESSBASE0///9036/Info(1051001)
Received client request: Get Extended Application Info (from user [celvin@Native Directory])
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:04 2013]Local/ESSBASE0///8072/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:36:06 2013]Local/ESSBASE0///5432/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1051061)
Application test loaded - connection established
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1054027)
Application [test] started with process id [4324]
[Fri Aug 02 13:36:15 2013]Local/ESSBASE0///8072/Info(1056010)
Application test created
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Define (from user [celvin@Native Directory])
[Fri Aug 02 13:37:22 2013]Local/ESSBASE0///6972/Info(1051001)
Received client request: MaxL: Fetch (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1042059)
Connected from [fe80::a531:1592:875b:3873]
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1051001)
Received client request: MaxL: Execute (from user [celvin@Native Directory])
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1054014)
Database test loaded
[Fri Aug 02 13:37:28 2013]Local/ESSBASE0///4520/Info(1056020)
Database test.test created
Regards
Celvin
http://www.orahyplabs.com

How to find out the infoProvider for a given dimension table?

Experts:
In RSA1, I want to find out the infoProvider for a given dimension table.
But I am not sure how to display the tables linked to a given infoProvider.
Could you provide a way to display all tables linked to a given infoProvider?
Thanks a lot!

See, The dimension table starts with Dcubename1 and incremental Dcubename2 .... so on
Ex.ZSD_C01 is your cube name
Dim tables starts for this is /BIC/DZSD_C011 /BIC/DZSD_C012 ...
Goto - LISTSCHEMA - derive cube name from given dim table and enter cube name - execute - will show you all the tables

How to find out the domains related to only Transaction Tables....?

Hi All,
I have to find out all the Domains which are related to Only Transaction Tables, that Domains should not be used or related to Master Tables, pls let me know is there any way to find out?
Akshitha.

Step 1:
Select TABNAME from DD09L where TABART = 'APPL1'.
Select DOMNAME from DD03L where TABNAME = TABNAME (got from the above statement)
By this way you will get all the domains used in Transaction table
Step 2:
Select TABNAME from DD09L where TABART = 'APPL0'.
Select DOMNAME from DD03L where TABNAME = TABNAME (got from the above statement)
By this way you will get all the domains used in Master table
Step 3:
Display all the domains got from step 1 and not in step 2.
Hopefully this will fulfill your requirement.
Please reward if useful..
-Tushar

How to find out the primary key of oracle apps tables

Hii,,
My Question is How to find the primary key in the apps table...Is there any Query or other way to find out???
for eg.
I want to find out the primary key of the AP_INVOICES_ALL table...just tell me how can i get the primary key of this table.
I am currently using toad for the query..
Please guide me...

you can define the primary key when you create table
or add the primary key after the table creation by 'ALTER TABLE ... ADD constraint pk_nme primary key (col1, col2)';
you could use below sql to check the detail of primary key:
1) check out the table definition directly:
select dbms_metadata.get_ddl('TABLE','EMP') FROM DUAL;
2) check out the columns of primary key:
select * from user_constraints where constraint_type='P' AND table_NAME='EMP';
select * from user_cons_columns where CONSTRAINT_NAME='PK_EMP';And BTW, it is madam, not sir. :)
Edited by: PhoenixBai on Dec 17, 2010 1:07 PM

How to find out the query is accessing the DB tables or not

Hi Gurus ,
How to find out the query is accessing the DB tables or not.
Where exactly we will find this information in SAP BW.
I know that this information we can find in ST03. But where exactly we will find the query information along with DB information?

Lakshmi
Activate BI Technical Content for Query analysis and run query against that.
Hope this helps
Thanks
sat

Find out if a certain Stored Procedure runs

Hi all,
i have to state that i dont have much oracle specific database knowledge but i've spend half a day now gathering information about a certain problem and didnt find any really working solution.
What i want is to be able to find out if a certain stored procedure is currently running (executing) in the database. I need that to be able to prevent a user of my client application from executing a certain procedure more than once in the same time.
I have found some interesting information about the oracle Call Stack (dbms_utility.format_call_stack) but its not as helpfull as i orginaly thought because as far as i can see it only shows which procedures where executed (and are still executing) while the procedure with the dbms_output.put_line(dbms_utility.format_call_stack) command is executing.
But it doesnt show anything about procedures which are running in another instance of SQL*Plus, for example.
I have no other idea at the moment ...
So i hoped anybody in here maybe has an idea or maybe allready a solution.
But ... thanx in anyway =).
With greetings from germany,
Oliver Bankel

I'm sure there are several solutions.
This is how we solve this problem, not elegant but it works.
We have a table of procs that are running.
Active_Jobs
JOBNAME    VARCHAR2(35)
USERNAME   VARCHAR2(30)
STATUS     VARCHAR2(20)
Then within the proc
job_conflict               EXCEPTION;
BEGIN
select count(1) into v_status from ACTIVE_JOBS
where username = USER and status = 1 ;
if v_status > 1 then
   RAISE JOB_CONFLICT ;
end if;
INSERT INTO ACTIVE_JOBS (JOBNAME, USERNAME, STATUS)
   VALUES ('PROC NAME', USER, 1) ;
COMMIT;
DELETE FROM ACTIVE JOBS WHERE JOBNAME = 'PROC NAME' AND USERNAME = USER ;
COMMIT;
exception
   WHEN job_conflict THEN
     raise_application_error( -20010,'YOUR MESSAGE HERE');
END;

From which prgram the table TSTC is updated

Hi all ,
Can anybody know me from which program, the Table TSTC is updated where it stores all the transaction codes.
Regards,
Madhavi

Tcode for maintaining Tcodes is SE93.
Goto>SE93>System>Status>Program.
Program Name:SAPLSEUK
include lseuktop. " Global Data
include lseukuxx. " Function Modules
include lseuko01.
include lseuki01.
include lseukf01.
include lseukf00.
include lseuki00.
Navigation Transaktion
include lseuktn0.
include lseuke01.
include lseukfwm.
Regards,
Ansari.

From which transaction the table OBEW is updated

Hi Experts,
From which transaction the table OBEW is updated
Thanks,
Nagendra

The table OBEW gets updated thru MI21/MI22/ and MB01/MB02

How to find out the position in which an application hangs

Hi,
is there any possibility to find out the position in a source, in which a deployed application hangs?
For example, there is an endless loop in an application, which is already deployed. In runtime the application hangs in this loop. How can I findout in which line the application hangs?
In other words, how can I see the stack of a certain process,for example, http_workerx?
Regards,
Ali
Message was edited by:
Ali Maraschi-Schouschtari

Hi Ali,
With SAP NetWeaver Composition Environment (CE) 7.1 SP3 it is very easy.
1.) Open the SAP Management Console
2.) Go to AS Java Threads tree node - you will see all the threads that are currently started on the system
3.) Check for threads that are colored in red - it takes about 30 sec the system to detect that an HTTP thread (http_workerx), as it is in your case, is hanging/executing endless loop.
4.) Right click on the hanging thread (colored in red) and pick 'Callstack' from the pop-up menu
5.) In the new window you will see the stack-trace showing what exactly this hanging thread is doing at the moment.
With the previous versions (or SPs) you need to apply a little bit more technical skills for the same result. (1) you need to do produce thread dump of the server that is suspected to have hanging thread and (2) to analyze this thread dump (check what the threads in Running state are doing). As it is in your case with the HTTP worker threads, their names are also printed in the thread dump, so you can focus only on them.

How to find out the releases for which an XPRA needs to be executed?

Hello All,
I am looking for some information related to XPRAs executed during the upgrades.
1. Is there a DB file present from which the XPRAs which needs to be run during the upgrade is stored?
2. From the name of the XPRA is it possible to find out which releases it is applicable for(if you cannot access the transaction XPRAin the system) ?
Thanks,
Resmi.

sorry Resmi,
missed some word there.
when you will run the prepare it will give you information about the xpra objects.
Regards
Ashok Dalai

How do i find out what is the data type of a column of a Table in oracle or SQL?

a) What if i want to find out the Datatype of a specific column in the Table.
b) How do i find the Column Datatypes?
Can anyone please help me. I am new to oracle and Trying to Learn some stuff

Hi,
How about doing
SQL> desc <table_name>
SQL> desc emp
Name Null? Type
EMPNO NOT NULL NUMBER(4)
ENAME VARCHAR2(10)
JOB VARCHAR2(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NUMBER(2)

How to find out to find by which procedure a table column was updated

Similar Messages

Maybe you are looking for