How to find program/TCODE which has updated the tables

Hi All,
Is there any way to find out program or transcation which has updated the tables.
BR
Kamal

you can see in the table CDHDR or CDPOS which will give you the transaction code and program names.
Regards,
Krishna

Similar Messages

How to create a jframe which has only the close button

hi
i want to create a jframe which hold only the close button on the title bar. just like an JOptionPane.
hussain52

Well, if you are in a window's environment and using forte, you can go to sample forms, MDI, and then just highlight and delete what you don't want from the menubar.

How to find a SH which has multiple SPs ??

Dear All,
How Can I find a Ship-toParty in my system, who has multiple Sold-to-Parties.
I am guessing this data will be available in KNVP, but was not successfully.
Anyhelp is appreciated.
madhu

check KNVV table also look at the partner functins.
Shreekant
Edited by: Shreekant Ashkani on Jun 24, 2009 9:30 PM

How 2 find program for smartform

how 2 find program for smartform

Hi,
go to TNAPR table and find the driver program for the layout.
give the layout name, if you know the output type also give it.
OR
go to se71 and go to the layout , check the text elements syntax then it will show the possible driver programs in the window to choose.
that way you can find..
Or else...
Go to the Tcode -> NACE
OR
Go to the T-code 'SMARTFORMs'
Give your form name
go to the general attributes.
Check the Package name.
then go to T-Code-> SE80
there check the program name for a package wise
Regards,
KK
Message was edited by:
Kishore Kumar Karnati

Error updating the table condition table 372 in J1IIN

Hello all,
I am facing the problem in the transaction code J1IIN (In CIN).
I have maintained the condition type JEXP ( A/R BED %) as 16% with the Key combination Country/Plant/Control Code (Table 357). While iam saving the Excise invoice the system is throwing the error like Error updating the table condition table 372
I have gone through the post given by Ms. Jyoti few days back and tried to do some changes in the customisation.
I tried to maintain a different access sequence for the condition type JEXP i.e In the access sequence except condition table 372, I have maintained all other condition tables.
Still the error is persisiting. Can anyone put some light on the issue.
I have even traced the values being hit in the tables directly. There is no relation of table 372, then why is it being cause of the error.
Gurus plz give ur suggestions.
Thanks
Srinivas

Hello Srinivas/Sandeep
Please ensure that access sequence in the condition type JEXC has got the table 372. If it is not there please maintain it.
The standard access sequence used in all duty condition type
is JEXC which has got the table 372 this will get updated once
you save your excise invoice.
If the issue is resolved, kinldy close the message.
Regards
MBS

How to handle user preference which has "_" and " " in the name

Hi Experts,
I have a question how to handle value which has like "_" and "space" etc in user preference.
If setting "a_b-c d", I could not retrieve this because it's escaped in database.
So this code can't get value even though I can set it.
Is there any restriction of name? Is there any documentation how to code user prefernece which has non alphabet and number in the name?
I know it's possible to handle the data like adding escaped data. But I don't think this is the best way to retrieve the data. Because nobody confirm it's not problem in the future.
Could you tell me the best way to get these user preference?
Thanks in advance,
Masaaki Tada
Here is a sample.
<%@ page contentType="text/html;charset=Shift_JIS" %><%@ page language="java" import="com.plumtree.remote.portlet.*, com.plumtree.remote.prc.*, java.util.*" %>
<%
/** * UserInfo - Simple Page * Display User Information*/
// VariablesIPortletContext oPortletContext = null;IPortletRequest oPortletRequest = null;IPortletUser oPortletUser = null;IPortletResponse oPortletResponse = null;IRemoteSession s;IUserManager oUser;
/* Get Portlet Objects */
try{oPortletContext = PortletContextFactory.createPortletContext(request, response);oPortletRequest = oPortletContext.getRequest();oPortletUser = oPortletContext.getUser();oPortletResponse = oPortletContext.getResponse();} catch (Exception e) {oPortletContext = null;oPortletRequest = null;oPortletUser = null;oPortletResponse = null;}
String val = oPortletRequest.getSettingValue( SettingType.User, "a_b-c d" );String hoe = oPortletRequest.getSettingValue( SettingType.User, "abcd" );out.println( "a_b-c d: " + val );out.println( "abcd : " + hoe );
oPortletResponse.setSettingValue( SettingType.User, "a_b-c d", "aiueo" );oPortletResponse.setSettingValue( SettingType.User, "abcd", "bbbb" );%>

Plumtree recommends that user preference names have only alphanumeric characters in them (a-z, A-Z, 0-9). Any non-alphanumeric characters will be encoded by the EDK.
I strongly suggest that you change your user pref name to something that's alphanumeric. However, if that is not possible, you can use the following workaround: in the web service editor, enter the encoded name for the user pref. There are several ways to get the encoded name.
One way is to encode the pref manually, yourself. Plumtree uses the %u encoded format: each non alphanumeric character is converted into %uxxxx, where xxxx is the Unicode representation of the character. For all ASCII characters, just look at the ASCII hex chart. For example, character "-" has a hex value of 2d. So, a preference name "jane_pref" would be encoded to "jane%u002dpref", and you'd enter the latter value on the preferences page in the web service editor.
The other way to find out the encoded value is to set a preference programmatically and use the HTTP tunnel tool to look at HTTP traffic between the portal server and remote server. The remote server will be sending a HTTP header to the portal server (the header name will probably be CSP-User-Pref) and inside the header you should see the pref name, encoded with %u. Just copy it out of there and into the web service editor.
Hope this helps,
Jane

How to find Program Name by Recording name

Hi,
How o find program name ? for example i have recording(SHDB) name is:ZVA01REC.
i want to find the respective porgram for that recoring?
Thanks and Regards,
Anu.

Hi Anitha,
"No it's showing standard program name like:SAPMM06E
but actual program name is:ZBDCME22."
SAPMM06E is the program the recording runs
ZBDCME22 must be an additional program that someone must have created for running the recording.
There is no way for u to find a program for a given recording (this is only a one way trafic; recording -> program create; not visa versa)
your best bet would be that search in se38 for programs starting with ZBDC* and then check the short text. may be the person who made it was kind enough to update the short text with teh recording name.
Hope this was of some help.
Regards,
Sagar.
Edited by: Sagar Mehta on Nov 12, 2008 10:00 AM

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
What should I do?

The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
http://support.apple.com/kb/DL999
http://support.apple.com/kb/HT4670

How to find for ex : kunnr is updating how many database tables

Hi all
How to find for ex : kunnr is updating how many database tables .
Rgds
Rafi .

hi rafi
go to se15->abap dictionary->fields->table fields-> give kunnr at field name text box->press f8.
then it will show ,in how many tables the kunnr field exist.the kunnr field updates those tables.
don't forget reward points.
kiran

How to upload a file which has more than 999 line item through BDC ?

Hello Techards
Hi to all
Can any body tell me how to upload a file which has more than 999 line item through BDC for traction F-02 ?
Thanks in advance.
Shovan

Hello Shovan,
You split it up to post two accounting documents with the help of a "suspense" a/c.
Say, you have to post the following line items below:
line 1 - dr. - GL a/c X - $1000
line 2 - cr. - GL a/c Y - $1
line 3 - cr. - GL a/c Y - $1
line 1001 - cr. - GL a/c Y - $1
You cannot post the above as a single doc in SAP (because of technical reasons), so you need to break it up into 2 documents as below:
Doc1
line 1 - dr - GL a/c X - $1000
line 2 - cr - GL a/c Y - $1
line 3 - cr - GL a/c Y - $1
line 998 - cr - GL a/c Y - $1
line 999 - cr - SUSPENSE a/c - $3
Doc2
line 1 - dr - SUSPENSE a/c - $3
line 2 - cr - GL a/c Y - $3
Note that there is no incorrect impact on accounting as first we credit suspense a/c by $3 and next we debit the same suspense a/c by $3 as a result the effect is nil. Similarly, we credit $997 to GL a/c Y (which is less by $3) in the first doc which is compensated by the second doc by crediting the shortfall of $3.
Hope this helps,
Cheers,
Sougata.

How to find out web-inf path from the physical drive?

How to find out web-inf path from the physical drive?
I have some user profiles in web-inf directory.SO I want to know the path from root directory like
d:/program files/allaire/jrun/appname/web-inf/profiles/username like that.
Presently I am able to get the path upto the application directory and from that I am concatinationg web-inf/profiles/username .
But it is giving problems when it is deployed under unix or linux.Because web-inf there it treats as WEB_INF
SO I want to get the path of web-inf directory with out hard coding.
Thanku

String path = application.getRealPath("/WEB-INF/profiles/username");
Note sure why you need this, but you don't need the real path to read the file - you can get an InputStream using the relative path. See ServletContext getResource() and getResourceAsStream().

How to update the table when change list item in classic report

hi ,
i worked with apex 4.2 and i create normal classic report with one select list(named loved)Column ,now i want to update table when user change the list with new value ,i can't create dynamic action to do this,i create check box with primary key and loop for check item to update the table but i can't get the value of list item. and for more speed the user want to do this when change the list value.
my question
1- how to do this by javascript and get the value from list item and update the table with new value
2- is i must use API to create list item so i can get the value of item in report or what.
Thanks
Ahmed

I coded the following to give you direction:
1. In the "Element Attributes" section of the DEPTNO column, I call a javascript function as:
onchange = "javascript:updateTable(this);"2. I wrote a simple javascript function that shows an alert when the user changes the select list as:
<script language="JavaScript" type="text/javascript">
function updateTable(pThis)
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
alert('Row# - '+ vRow + ' has the value - ' + pThis.value);
</script>Now, you can call a AJAX on-demand process inside the javascript function to update the database value.

How to find out when data was deleted from table in oracle and Who deleted that

HI Experts,
Help me for below query:
how to find out when data was deleted from table in oracle and Who deleted that ?
I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
TABLE_OWNER                    TABLE_NAME                        INSERTS    UPDATES    DELETES     TIMESTAMP         DROP_SEGMENTS TRU
PRODCTL                        F9001                                                     1683         46       2171            11-12-13 18:23:39             0                   NO
Audit is enable in my enviroment?
customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
SQL> show parameter audit
NAME                                 TYPE        VALUE
audit_file_dest                      string      /oracle/admin/pbowe/adump
audit_sys_operations                 boolean     TRUE
audit_syslog_level                   string
audit_trail                          string      DB, EXTENDED
please help
Thanks
Sam

LOGMiner --> Using LogMiner to Analyze Redo Log Files
AUDIT --> Configuring and Administering Auditing

My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address. Is there a way to see the IP address of my Mac through iCloud?

My Mac has been stolen, but I have my iCloud account setup. The "find my mac" app has found the apartment block it's in, but I need an IP address for the police to go and claim it. Is there a way to see the IP address of my Mac through iCloud? I've tried to get the IP address through Gmail and Dropbox but no success. Is there any software that updates automatically that I could find the IP address through?

Shouldn't the IP address be on the box you bought the machine in? If you have the box, take it to the police as evidence that it's your machine. If I were you, I would set the firmware password when you get it back, but make sure you have the password written down in a safe place. If you forget it, there's only two ways to reset it. Either pay $400+ for the tool that can do it, or pay almost nothing for Apple to do it, I think it depends on where you live. The firmware password is this encrypted password and it can't be hacked either. The password prevents anyone from booting the machine into recovery mode, thus preventing them from restoring the computer to factory settings or performing any other functions. It's not stored in the hard drive so replacing that will be of no use either.
I hope you get your Mac back and I hope this was helpful!

Adobe forms which has 3 internal tables

Hi.
I am developing a adobe forms which has 3 internal tables
1 u2013 multiple lines table
2- multiple lines item table
3 u2013 multiple lines item table
I want to pass the above 3 internal table to Adobe forms and print it.
Also the data records can be many in each internal table.
I want to display the contents one after other.
How to do.

Whether one table or more same aproch. Follow this for each table you have. Within a "flowed" subfolder create a table with 1 row (heading, footer if needeed). Bind the entire table at the table level. Bind 'data' fields to the row fields. Make sure you indicate that the table and rows are to repeat for each item in table.

How to find program/TCODE which has updated the tables

Similar Messages

Maybe you are looking for