HOW TO FIND QUERY
Hello All,
I have some problem I have one report When i try to refresh that output report it is giving error like "Query does not exist on current server or Deleted",
I dont have query technical name or discription...
Just i have one excel report...
through olap active function i found queryid:
is there any posibility that i can found technical name of the query, if it is deleted then who deleted this query when it was deleted...
I have searched in rsddstat with this query id there are some records but there it is showing blank for query name.....
Thanks,
Pavan.
Hello sadeesh,
Yes I have seen that one in rsddstat itself but no use there were some 60- 70 reports on that multi provider,
if some one deleted that query then we cant find.
Actually user sent only the excel sheet report, nothing other than this, through that we found target name and queryid..
Thanks,
Pavan.
Similar Messages
-
How to find query in PI system
Hi Experts,
Please let me know how to find the query in the PI system when the JDBC adapter in at receiver end.Hi,
T codes for tables are ZSE!6 or SE11.
You can enter the table name Z* as the table name.
Regards,
Phani. -
How to find query completion time
How to find active insert query completion time in oracle?
friend,
i don't find anything in the query since time_remaing value show zero.
select TIME_REMAINING,TOTALWORK,START_TIME,SOFAR from v$session_longops where sid=115.
TIME_REMAINING TOTALWORK START_TIM SOFAR
0 21456 11-MAY-09 21456
0 4588 11-MAY-09 4588
0 6138 11-MAY-09 6138
could you please guide me how to calcaluate the completion time? -
How to find query names in transport?
Hi Experts,
We have collected around five queries for transport. But in SE10, we do not see the query names. How to find out the query names there?
With Kind Regards,
KannanOpen query in query designer.
From 'Properties' window (right side Window) dropdown select query.
From 'Advanced' tab copy the UID. U can search that in SE09.
OR
Copy that query ID from SE10, use table RSZELTDIR with that ID. -
How to find query processing time?
im using Oracle Express Edition
i want to find the processing time of a query?,
anyone please specify briefly how to find the query processing time
can i get the processing time of a query by using Express edition or should i install Enterprise Edition.
with regards,
ravikanth.This link will help
http://forums.oracle.com/forums/thread.jspa?threadID=2210335&tstart=0 -
How to find Query Name from Report Name
I am trying to find a the query name for program AQFKSYSTQV000045ZCHECKNUMBERLU I have looked in Standard Work Area under all of the user groups but no luck. It is currently only in our Production System. Please suggest any other places I can look.
Thanks in advance for your help!I apologize for not seeming like I have a clue....I did search the Forum...and maybe I wasn't clear with my question....again I apologize.....I am somewhat familiar with query and I understand that the query name is probably ZCHECKNUMBERLU. My issue is that I cannot find the user group. I have broken It is not a user group under Global Area or Standard Area. For example....We have a query named ASETAQUISITION. The program name is AQFKAM==========ASETAQUISITION...This query is located in the AM User Group....Easy Find. However, the program in question is AQFKSYSTQV000045ZCHECKNUMBERLU. I have broken this program name apart every way I can think of and I cannot find a user group in my global or standard Area. So I guess I should ask, by looking at that program name, how do you determine what the user group name is so I can find the actual query?
-
How to find query/program/rdf behind EBS default XML reports
There is a report in Purchsing Module "Standard Purchase Order " its data group name is "Standard Purchase Order Data Source" and Code is "PO_STANDARD_PO". i couldn't find its concurrent program. I am looking for query behind this report. how can i find this.
You can find it using sql trace...
refer this article..
http://prasanna-adf.blogspot.com/2009/01/sql-trace.html
Note: post these questions in EBS general discussion.
--Prasanna -
hi,
i was given the TCODE name how can we find the quesry name from this??as i wanted to make modifications to the existing query.please help mehi siva,
Just goto Transaction SE93 it'l Execute the transaction Code.. there u'l know what the txn does.. go to TSTC table it shows user-defined an also built in Transaction codes with Explanations.. then u'l know the details of the code you have..
steps:
1.GOTO SE93.
2.Enter TXN code and Execute.
3. Else Goto Se11 and type TSTC and search for ur TXN description. -
How to find Query name using Variable name (by Customer exit code in CMOD).
Dear SDN,
Enhancement name RSR00001.....Function Module name.....EXIT_SAPLRRSO_001...Include ZXRSRU01...
Some x variable coding in done here.
How can I find out the Query name for the X variable?
Wating for reply...
Thanks & Regards,
Praveen.KDear,
I have got answer..
Method 1 :Right click on variable in Query Designer and find the where used list.
Method 2 : SE16--> RSZGLOBV -->Enter the variable VNAM as 'Variable Name' ->Get the VARUNIID> Go to table RSZELTXREF --> Enter the values of VARUNIID in TELTUID --> Get the list of SELTUID --> Go to table RSZCOMPDIR --> Enter the values of SELTUID in COMPUID --> Get the list of COMPID -->COMPID is the list of queries
Thanks & Regards,
Praveen.K -
How to find Query with Running time
dear frnds,
I need to find the query details and query execution time from a DB USER. am using oracle 11g. how to generate this report
please give me any idea.,
thanks.
Edited by: Velsjeya on May 14, 2012 1:07 AM
Edited by: Velsjeya on May 14, 2012 1:07 AMVelsjeya wrote:
thanks a lot,
here i need to show query running time also...( how many mins that particular query ran) ... please help mePlease do search for the question's answer. V$SQL should be able to show you what you are looking for. Asktom's thread given below discusses the same,
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:912859800346801944
Aman.... -
How to find query that ran yesterday.
Hi
oracle 10gr2
Is there any way to find out the queries that ran on my database yesterday or even before than that?
Thanks
KhuranaKhurana wrote:
1)I was asked this question in an interview. But i was not sure. So shall i assume there is no way to find it out except the auditing.
2)Suppose a query took 5 hours to complete yesterday normally it takes 10 mins. anyway to find it out today?
KhuranaWell if it took 5 hours yesterday, then most probably it would be in awr report/snapshot report. If its there then you can find it out, else I doubt.
Regards
Anurag -
How to fine query name for given transaction
how to find query name for given transaction
Check out the related thread
https://forums.sdn.sap.com/click.jspa?searchID=1491773&messageID=959848
Use T/code SQ01 to find query. after this transaction select client specific Query areas via
Menubar>Environment>QueryAreas--> Select Client Specific.
Regards,
Santosh -
Hi all,
how to find physical query from report here m checking like Administrator->manage session--> report-->view log
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- SQL Request:
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- General Query Info:
Repository: Star, Subject Area: AAA, Presentation: AAA
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Cache Hit on query:
Matching Query: Created by: Administrator
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Query Status: Successful Completion
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Physical Query Summary Stats: Number of physical queries 1, Cumulative time 0, DB-connect time 0 (seconds)
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Rows returned to Client 6
+++Administrator:3220000:3220011:----2011/01/03 02:51:43
-------------------- Logical Query Summary Stats: Elapsed time 0, Response time 0, Compilation time 0 (seconds)
but here m not able to find database query..how to find that query plz help
Edited by: Sonal on Jan 3, 2011 5:29 AM
Edited by: Sonal on Jan 3, 2011 5:30 AM
Edited by: Sonal on Jan 3, 2011 5:30 AMHi,
as Daan said, set the variable in Advanced tab but not on loglevel..
because, our problem is to bypass the bi-server cache.
Do this:
1. Go to Advanced tab.
2. In Prefix field(scroll down to see this field) , enter this:
SET DISABLE_CACHE_HIT = 1;
Note: Make sure that you're ended up above statement with semicolon and do not click on Set SQL option...
3. Save report, then run it..
4. After you see the query, i recommend you to take take out that prefix tag then save it again.. -
How to find the name of query for a given report
Hi All,
I am having the name of a report and i need to find out the name of query for that report . Plz tell me how to find out the name of the query for a given report.
Thanks.
Regards,
Pooja Joshi.Use this FM
RSAQ_DECODE_REPORT_NAME
This FM takes program name as I/P and gives Query Name as O/P.
This FM uses the structure AQADEF to fetch the data.
Hope this helps.
Regards
Vinayak -
How to find a query name from report name
I have a report in my system with the name AQICMM==========P2============ . I believe this was created from a query. How to find the query corresponding to this report ? I need to change the logic for certain columns of the report. How to know if this was created from SQVI or SQ01 or any other transaction.
THanks.Found it..Query name is P2. It was in a different query area..Standard area and not custom area where I was initially looking at.
Edited by: Shareen Hegde on Aug 22, 2008 5:14 PM
Maybe you are looking for
-
I have forgotten my security questions but when I click on My Apple ID and got to password and security, there is no option to rest my questions and/or send my self a rescue email, what do I do now ?
-
Is there a way to print without triggering the OSX print dialog box? In Ap 2 there was only the Ap print dialog box; now there's an extra step as the program displays the OSX print dialog box. Is it possible to circumvent the second box? Thanks! Stev
-
Cash flow direct method report is generating by using report painter
Dear all i am preparing cash flow statement direct method report by using standard t.code s_alr_87012271 in this report i am maintain values by using T.code FSI5 in report painter form name 0SAPRATIO-04 there i am maintain GL accounts codes which ce
-
Learner Access using Org Hierarchy
Hi Recently created an org hierarchy so we can utilise the self enrollment functionality for specific parts of the organisation against certain courses etc. However, when we have assigned the relevent learner access the class is not appearning within
-
I currently have Mac OSx 10.4.11, and just purchased OSX Snow leopard. Can I keep my original version of iMovie along with the new version when I download the new operating system?