How to find the name of query for a given report

Hi All,
I am having the name of a report and i need to find out the name of query for that report . Plz tell me how to find out the name of the query for a given report.
Thanks.
Regards,
Pooja Joshi.

Use this FM
RSAQ_DECODE_REPORT_NAME
This FM takes program name as I/P and gives Query Name as O/P.
This FM uses the structure AQADEF to fetch the data.
Hope this helps.
Regards
Vinayak

Similar Messages

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to find the exact user exit for our requirement?

    Dear Mr. keerthi,
    can you please explain me how to find the exact user exit for our requirement?

    Hi sandip
    There is more than one method in which you can check for user-exits.The following method is used very often.
    <b>How to find the exact user-exit for your requirement.</b>
    1.     You can check the user exists using transaction SE85.
    2.     Repository Information System -> Enhancements -> Customer exits
    3.     You can search the user-exits by package name.
    4.     Double click on each exit name to check the function module exits.
    <b>The procedure to find the package name.</b>
    Execute transaction SE93 
    Enter the tcode of the transaction for which you want to check the user exit.
    Example: if you want to find the user-exit for purchase orders while changing, enter ME22n  and press display.
    You will get to see the package name
    But you need to confirm that the user exit will get triggered at the appropriate event.
    ( example: you might want some validations to be done ON SAVE of a purchase order)
    <b>Checking if the user-exit is getting triggered or not.</b>
    1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
    2.     Click on where used button. In the pop up that immediately appears choose only programs .
    3.     You will get a list of programs. Double click on the program name.
    4.     You will get the list of location where this function module user exit is used.
    5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
    6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
    regards,
    Prasad

  • How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

    Hi all,
    I am new to this community p
    i have issue regarding  the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
    thanks,

    Hi ,
    welcome to SDN.
    You can select the appropriate Customer exit accrding to the available parameters .
    The list of exits available are 
    EXIT_SAPLVEDF_001
    EXIT_SAPLVEDF_002
    EXIT_SAPLVEDF_003
    EXIT_SAPLVEDF_004
    For Example , if you want  to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
    Hope this Helps
    Rgds
    Sree
    Edited by: Sree on Jul 23, 2010 12:11 PM

  • How to find the Names of Most costly Views or Most Time consuming views

    Hi All,
    I had a database consisting of almost 200 views,as a part of Optimization process i want to find out the most costlier views.How to do that.Actually i want the names of the VIEWS,so that i can optimize that.Can any one help me out?
    I had one more doubt in our Database a view is created like view A( which is created by joining several tables).so do i need to add index on this view separately or does it take the index of the tables which i joined? And in our Database i  had created
    a VIEW which is derived from other views(the Joining objects are views not tables),so while i select recoreds from this views which is derived from other views it is taking a lot of time.Is tehre any problem with that?

    Please avoid such double post spread over several forums:
    http://social.msdn.microsoft.com/Forums/en-US/bae4042a-10b8-4d12-aa46-88a05ea37a76/how-to-find-the-names-of-most-costly-views-or-most-time-consuming-views?forum=sqldataaccess
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • In which table can I find the name and surname  for a username ?

    Hello,
    I search the table with the master data of users. Specially I search the table where I can find the
    name, surname for a user.
    In which table can I find the name and surname  for a username ?
    Thanx in Advance

    Hello  everybody,
    thank you for the helpful informations.
    thank you very much
    with kind regards
    cetoman

  • How to find the name of the program of session in sm35 ?

    I have some session in sm35.
    How to find the name of the program of session in sm35 ?
    Could you please help me ?

    In the list of sessions displayed -> double click the session that an error (i.e. Transaction Ended with errors).
    Then it will take you to another screen, here you choose the Screens tab.
    Check
    Re: BDC session's program name
    Re: BDC session's program name
    Regards,
    Santosh
    Message was edited by:
            Santosh Kumar Patha

  • How to find the profit center group for a profit center?

    How to find the profit center group for a profit center?

    Hi,
    try this also
    In order to pass the setid parameter of the FM, you have to concatenate the following things
    Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
    In my example below, I have declared as constants and concatenating to gv_setid.
    gc_01016 is the set id for profit centers
    gc_kokrs is the controlling area
    gp_pprct is the Profit Center group entered in the selection screen.
    You will get KOKRS value from the cepc-kokrs.
    data :   gc_0106(4)   TYPE c VALUE '0106',
               gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
               gv_setid          LIKE sethier-setid,
               gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
      CONCATENATE gc_0106  gc_kokrs gp_pprct INTO gv_setid.
      CONDENSE gv_setid.
      CALL FUNCTION 'G_SET_TREE_IMPORT'
        EXPORTING
          client                    = sy-mandt
          fieldname                 = 'RPRCTR'
          langu                     = sy-langu
          setid                     = gv_setid
          tabname                   = 'GLPCT'
          no_table_buffering        = 'X'
        TABLES
          set_values                = gt_set_values_1
        EXCEPTIONS
          set_not_found             = 1
          illegal_field_replacement = 2
          illegal_table_replacement = 3
          OTHERS                    = 4.
    By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
    Regards,
    Venkatesh

  • How to find the existing request no for Smart form

    Hi Experts,
    plz tell me how to find the existing request no for Smart form in ABAP.
    thanks in advance.
    regards,
    radhika.

    Radhika,
    Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
    Regards
    Narasimhan

  • How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

    I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
    This question was solved.
    View Solution.

    Hi,
    From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to find the number simultaneous call at a given moment on UCCX ?

    Hello,
    I would to know how to find the number simultaneous call at a given moment on UCCX ?
    it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
    Aubert

    Hi Gergely,
    I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

  • FM/Class to find the class and characterstics for a given material

    Hi All,
    Is there any Class/FM to find the class and characterstics for a given material.I tried some BAPI_OBJCL* BAPI's but lot of the BAPI's need classnum as input parameter. But i need a BAPI or tables or class which can give the class and its characterstic values for a given material.

    Hi Ben
             Try ..
    BAPI_OBJCL_GETCLASSES
    BAPI_OBJCL_CREATE

  • How to find the hidden objects in Webi Rich client  report 4.0 sp 04 ?

    Hi,
    How to find the hidden objects in Webi Rich client  report  at BI 4.0 sp 04 ?
    Best Regards,
    ASR

    Hi Sai,
    Go to Report Element Tab-->There you have a Tab Cell Behaviors.
    When you flip between 'With Data' and 'Structure Only' under 'Design' Tab,you can see the some cells will be hide/Un hide behavior,if hiding of cells applied.
    Select that cell and then Under 'Cell Behaviors'-->'Hide' Tab-->and choose Show Option.
    Regards,
    Venkat P

  • How to find the Name of Infoset either from Query Name or Program Name

    Hi,
    I ahve got the program name from the Transaction code of the Query. I also found out the name of the Query but I could not find out the name of the "Infoset". Please help me to find out the name of the Infoset either from the Query Name or from the Program name.
    Thanks,
    Jans

    Hello Christian,
    Thank you for your reply. Actually. We have got transaction name of report and from that we found out the name of the Program and from that Program we have utilised the FM to find out the Query name. But we are unable to find the name of Infiset as we have to Download this Infoset from DEV and it is to be uploaded into QUALITY.
    But we are not sure about the Infoset.
    I could not understand your sentence "When Open it".
    Regards,
    Jans

  • How to find the backend  SQL query of the JSP page in OIC

    Does anybody how the best way to find the backend SQL QUERY of OIV JSP page?

    How To Generate Trace Files in in HTML/JSP (using Profile Option)
    •     • Note: This requires proper responsibility to set SQL Initialization statement using Profile option.      
         Step 1.     Login to the desired Form application.     
         Step 2.     Select +Profile >> System ('Find System Profile Values' screen will pop up)     
         Step 3.     Check 'User' and Type in the Username (in which the account for that user will be trace)     
         Step 4.     Type 'Initialization%' in the Profile box and Hit 'Find' (Click here for preview.)     
         Step 5.     In the User box, type the following statement and Hit 'Save' (Click here for preview)
         BEGIN FND_CTL.FND_SESS_CTL('','','TRUE','TRUE','','ALTER SESSION SET TRACEFILE_IDENTIFIER = TESTING MAX_DUMP_FILE_SIZE = 5000000 EVENTS ='||''''||' 10046 TRACE NAME CONTEXT FOREVER, LEVEL 12'||'''');END;     
         Note:     specify any name you like to identify your trace, in this case, testing is the end name on the trace. You can also specify the amount of data allowable to be in the trace, in this case, 5000000 is the amount set. Make sure you hit 'Save' afterwards.[Quotes in the statement are all 'Single' quotes.]
              specifying TRACEFILE_IDENTIFIER value is mandatory when setting up the trace using the above profile option value
         Step 6.     Login to HTML / JSP page with username/password and start your flow. (Everything you do once login to HTML / JSP will get trace.)     
         Step 7.     Logout of HTML / JSP application once you completed with your flow.      
         Step 8.     Go back to the Profile option in the Form application and delete the Initialization SQL statement, and Hit 'Save'.     
         Step 9.     Log in to the database server or login server and retrieve your trace file.
         Identify and retrieve the trace file using the tracefile_identifier specified in Step 5.
         In this case the tracefile_identifier is “TESTING”. (Click here for Trace file locations) *     
         Note:     If you need to regenerate your trace or tracing a new flow, then repeat Step 1 to Step 8. To avoid self-confusion, choose a different name for your trace identifier everytime you set to trace.     
         Step 10.     See TKPROF section on how to format trace file into readable text.
         Trace Options Definition
         No Trace          Tracing is not activated
         Activities will not get traced.
         Regular Trace
         (Level 1)          Contains SQL, execution statistics, and execution plan.
         Provides execution path, row counts as well as produces smallest flat file.
         Trace with Binds
         (Level 4)          Regular Trace plus value supplied to SQL statement via local variables.
         Trace with Waits
         (Level 8)          Regular Trace plus database operation timings that the SQL waited to have done in order to complete, i.e. disk access.
         Trace with Binds and Waits
         (Level 12)          Regular trace with both waits and binds information.
         Contains the most complete information and will produce the largest trace file.
    ****Send me an email to [email protected],I will share the document with you.

Maybe you are looking for