How to find RGB values of an image in MIDP 2.0?

I am builiding a midlet in which i m supposed to take an image and than i want to find RGB values of all pixels
.After Finding the RGB values i want to store them in an array,and sort that array to find 5 Most repeated element of that array.Also i wanna construct color from those 5 Values and Display Those Colors.Can Anyone
Guide me Through This?

I have not used Vision much but I would be very surprised if you would be able to do this directly. It should be straight forward to get an average intensity with or without Vision (convert image to 2D matrix and average the values, for instance) -- the difficulty will be correlating the calculated values back to Lumens, etc. This could likely be done but it would probably require you to come up with the calibration curve and would be sensitive to setup changes, dust on the lens, equipment aging, etc. and these things should not be discounted. This is why, particularly if you're in a production environment, you'd probably better off buying a commercial meter and talking to it via a driver than to try to do it yourself -- they've already taken these things into account.
One more thing, in the picture you attached, any luminosity calculations you made would probably be skewed low as the white is saturated (railed) in spots and those under-reported values would affect your average. If you did try to come up with a Lumen calculation, you would probably want to turn your aperature and/or exposure down before creating the calibration curve.

Similar Messages

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
 you will be having your first program values in internal table or some variables,
 when you are calling the second program you wii use like this,
 SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
 WITH s_emp(second program select-options) IN t_emp(first program variables)
 WITH p_chk EQ t_chk
 WITH p_r1 EQ t_r1
 WITH p_month EQ t_month
 WITH s_cust1 IN t_cust1
 WITH p_r2 EQ t_r2
 WITH s_cust2 IN t_cust2
 WITH s_week IN t_week
 AND RETURN.
you have pas like this to get your first program details.

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

How to find the Values of SAP Gateway Server Host and Gateway Service Valu

Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
Phanikumar

Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano.

How to find these values fall in what time?

Post Author: newcruser
CA Forum: General
From 9 AM to 5 PM time range..how to find these values fall where?.
Is that done using group selection method?. Please give me idea and direction
UserId Type login logout1 1 2008-04-13 09:30:42 2008-04-13 10:30:122 2 2008-04-13 09:30:12 2008-04-13 11:00:323 1 2008-04-13 10:30:32 2008-04-13 12:56:234 2 2008-04-13 10:30:42 2008-04-13 12:00:345 2 2008-04-13 11:30:34 2008-04-13 13:40:236 1 2008-04-13 12:30:43 2008-04-13 13:00:437 1 2008-04-13 13:20:43 2008-04-13 14:45:218 2 2008-04-13 14:30:42 2008-04-13 15:15:599 1 2008-04-13 15:00:42 2008-04-13 16:30:4210 1 2008-04-13 16:20:42 2008-04-13 17:00:00

Post Author: newcruser
CA Forum: General
In my case minimum (login) time changes and maximum(logout) time changes everyday.
I want to create from minimum (login) to maximum(logout) for every hour, how many people are online. How to do?.
UserId login logout1 2008-04-13 09:30:42 2008-04-13 10:30:122 2008-04-13 09:30:12 2008-04-13 11:00:323 2008-04-13 10:30:32 2008-04-13 12:56:234 2008-04-13 10:30:42 2008-04-13 12:00:345 2008-04-13 11:30:34 2008-04-13 13:40:236 2008-04-13 12:30:43 2008-04-13 13:00:437 2008-04-13 13:20:43 2008-04-13 14:45:218 2008-04-13 14:30:42 2008-04-13 15:15:599 2008-04-13 15:00:42 2008-04-13 16:30:4210 2008-04-13 16:20:42 2008-04-13 17:00:00
i found minimum (login) and maximum(logout) using below formula. Now i want to find every hour from minimum (login) to maximum(logout) , so i can use each hour value in formula to calculate how many people are online for that particular time. How to do that?.
@Minimum
DatePart("h",(Minimum ()))
@Maximum
DatePart("h",(Maximum()))

How to get RGB value from pixel of an image.

hi, i need a little help... Is there any EASY way to get RGB value from point of an image? I searched javadoc but i only found very complex getRGB method working only with regions, and saving data into arrays.
Is there any other way that can use for example image.getGraphics() (so, i mean to get RGB from point of Graphics object) ?
Btw.: If you know, how Sprite.collidesWith(Sprite s, Boolean pixellevel) is working (with pixellevel = true), please write me. It could solve my problem too.
Thanks

Is there any other way that can use for example image.getGraphics() (so, i mean to get RGB from point of Graphics object) ?You can think of the graphics object like a pencil or paintbrush. Does a paintbrush know the color of the surface it is painting on? No.
Btw.: If you know, how Sprite.collidesWith(Sprite s, Boolean pixellevel) is working (with pixellevel = true), please write me. It could solve my problem too.Download the reference implementation from this site and see for yourself.
luck, db

How to read RGB values into Set

Hi,
I have been told that to count the total number of unique colors in an image is by reading each pixel RGB values into a set.
I have checked this and it is true that the set can do this fine if considering only either one channel of the R,G or B (this does not allow me to know the exact number of color exist). However, I am confuse on how to have all three R, G and B values into a set so that the set can consider the whole 3 values of RG and B as a color which can then be differentiated separately.
I think pixelgrabber allow to getPixel RGB values but I am working with JIU getsample method. Perhaps I missed out other methods in JIU which have the same functionality as in pixelGrabber.
I am working on an image analysis so I need to figure out this out first.
I am hoping anyone can help me out with this and I thank you.

as mentioned, pack the rgb values into an integer.
instead of a set, you will get better performance and
memory useage using a sorted, dynamically allocated
int array. With some minor work, you better this
structure by using more than one sorted array and a
cheap rgb mask hashing mechanism. I don't know what
JIU is, but look at the source of java.awt.Color for
details on how to pack/unpack rgb values.Hi,
Thank for your feedback. I have tried to pack the rgb values into an integer. At the moment I just making used of Set (will look into probably ArrayList after I get the rgb values correct). However, I am not sure whether my code is correct (which I doubt) or not. Not sure how the output looks like that. If you could have a look at it and confirm me, I would be very much thanking you.
the code snippet:
public void countColour() {
int r, g, b;
int[] rgb1DArray = new int[h * w];
int[] rgb = new int[4];
Set set = new HashSet();
int alpha = 255;
for (int i = 0, cnt = 0; i < w; i++) {
for (int j = 0; j < h; j++) {
r = intImg.getSample(0, i, j);
g = intImg.getSample(1, i, j);
b = intImg.getSample(2, i, j);
System.out.println(r+ "," g "," +b); // just checking rgb values
//rgb[0] = alpha;
rgb[1] = r;
rgb[2] = g;
rgb[3] = b;
System.out.println(rgb[0]+ "," rgb[1] "," rgb[2] "," +rgb[3]);
rgb1DArray[cnt] = ((rgb[1])<<16)|
((rgb[2]<<8))|(rgb[3]);
System.out.println("rgb["+cnt+"] :" +rgb1DArray[cnt]);
output:
Image file size is 230 x 236
204,221,203
0,204,221,203
rgb[0] :13426123
204,212,191
0,204,212,191
rgb[1] :13423807
180,166,140
0,180,166,140
rgb[2] :11839116
236,209,166
0,236,209,166
rgb[3] :15520166

Preview changes RGB values when resizing images

Since I upgraded to snow leopard, preview increases the Red spectrum when resizing images (png). Is this a bug or do I need to change a setting to preserve the original RGB values?

Figured it out. It seems that when you don't specify the BufferedImage that the operation will write too it changes the type to something it uses for the operation. This still seems like it should be a bug to me, but i got around it by doing this:
BufferedImage tempIMG = new BufferedImage((int)(srcImg.getWidth()*scale),(int)(srcImg.getHeight()*scale),srcImg.getType());
op.filter(srcImg, tempIMG);
return tempIMG.

How to find default value of a column ?

hi , alok again,
i have to find default value of a column.
Acutally i have found , column's max width, its nullability, precision, scale, type, but NOT default value.
I will have to use the default value and nullability while validating user's input.
ResultSetMetaData doesnot contain any method any such method...
Pls help,
how can i do so.
Any idea will be highly appreciated.
Thanks in adv.
Alok

Hi,
After you get the resultset from DatabaseMetaData.getColumns() as shown by sudha_mp you can use the following columns names to retrieve metadata information:
Each column description has the following columns:
TABLE_CAT String => table catalog (may be null)
TABLE_SCHEM String => table schema (may be null)
TABLE_NAME String => table name
COLUMN_NAME String => column name
DATA_TYPE int => SQL type from java.sql.Types
TYPE_NAME String => Data source dependent type name, for a UDT the type name is fully qualified
COLUMN_SIZE int => column size. For char or date types this is the maximum number of characters, for numeric or decimal types this is precision.
BUFFER_LENGTH is not used.
DECIMAL_DIGITS int => the number of fractional digits
NUM_PREC_RADIX int => Radix (typically either 10 or 2)
NULLABLE int => is NULL allowed.
columnNoNulls - might not allow NULL values
columnNullable - definitely allows NULL values
columnNullableUnknown - nullability unknown
REMARKS String => comment describing column (may be null)
COLUMN_DEF String => default value (may be null)
SQL_DATA_TYPE int => unused
SQL_DATETIME_SUB int => unused
CHAR_OCTET_LENGTH int => for char types the maximum number of bytes in the column
ORDINAL_POSITION int => index of column in table (starting at 1)
IS_NULLABLE String => "NO" means column definitely does not allow NULL values; "YES" means the column might allow NULL values. An empty string means nobody knows.
SCOPE_CATLOG String => catalog of table that is the scope of a reference attribute (null if DATA_TYPE isn't REF)
SCOPE_SCHEMA String => schema of table that is the scope of a reference attribute (null if the DATA_TYPE isn't REF)
SCOPE_TABLE String => table name that this the scope of a reference attribure (null if the DATA_TYPE isn't REF)
SOURCE_DATA_TYPE short => source type of a distinct type or user-generated Ref type, SQL type from java.sql.Types (null if DATA_TYPE isn't DISTINCT or user-generated REF)
Regards,
bazooka

How to find the value that is in structure???

hi experts,
i am changing standard form QM_INSP_RESULT I have an field MITTELWERT in QGRES
ie QGRES-MITTELWERT where QGRES is a structure .i need the value that is present in the field.How to find it.

Hi Manikandan Muruganandham ,
To find fields the refined search is through Transaction SE84.
Go there and find the fields of your choice.
1> ABAP DICTIONARY
2> FIELDS
3> Select Table fields to know where you can find the field of your choice.
Reward Points if useful.
Thanks,
Tej..

How to find, select and delete duplicate images fro LR catalog?

I'm on a MacPro, Leopard, LR v1.4.1
How do you FIND duplicate files and remove them from the catalog?
I had 12 images outside of a subfolder on a job. When I did a "synchronize folder" action it added those same 12 files to the catalog. I then physically moved the files into the correct folder - replacing the ones of the same name inside. Now I have 2 images of the same name in the catalog. I know I an choose them one at a time & Remove, but I can see this happening on a larger scale where I would want to Find All Dupes, then remove them.
Same thing would happen if you imported from a folder or card that hadn't be formatted & forgot to check the "don't import suspected dupes" box.
thanks!

"I then physically moved the files into the correct folder"
Precisely how? You didn't use Explorer/Finder, did you? Once images are in Lightroom, use Lightroom for moving files between folders. The best way to remove duplicates is to avoid having them in the first place.
To get rid of existing ones, one way is to select those folders and save the XMP (Metadata > Save....) and then remove those folders from LR. Then import them again. Alternatively sort them by capture time and go through eyeballing them - use the reject flag to identify duplicates and then the delete rejects command.
John

How to Get RGB Values from a CMYK Color in the DOM (CS5)

(CS5, Actionscript)
Hi all,
I have an InDesign document containing TextFrames whose border colors are specified as a CMYK array.
I would like to be able to get its color specification as its closest RGB equivalent.
Does the InDesign DOM contain a method for doing this for me automatically? If not, what workarounds are there?
TIA,
mlavie

Here's how to convert RGB to CMYK:
function rgb2CMYK (r,g,b){
    var color = app.documents[0].colors.add({space:ColorSpace.RGB,colorValue:[r,g,b]});
    color.space = ColorSpace.CMYK;
    var retVal = color.colorValue;
    color.remove();
    return retVal;
The same idea for the reverse.
For info on converting to grayscale, check out this:
http://in-tools.com/article/scripts-blog/convert-colors-to-grayscal-in-indesign/
HTH,
Harbs

How to find dynamic value(screen value) in table control for current row .

hi to all,
i used table control in my screen. for column no 2 field i was used serrch help. and for column number 3 i used a dynamic help.
in change mode you can change any row for table control.
when i was using search help for a row which was already entered in column no 3 i cannot get any value.
how i can get value of row no 3 and column no 2 value.
thanks

Try using like index for the serarch the TC-current_line

How to find a value into a data block

There is a way to find a value into a data block, like finding
one into a record group
null

Rafael Moreno (guest) wrote:
: There is a way to find a value into a data block, like finding
: one into a record group
Try something like this:
-- has to be in a when-button-pressed or key trigger
go_block('x_block');
first_record;
r_found:=false;
loop
if :x_block.search_field:=search_value then
r_found:=true;
exit;
end if;
down;
end loop;
if r_found=false then
first_record;
message('Value '

How to increase RGB values of a radial gradient of shapes every 1 or 3 frames?

Hello everybody. I really need help. Indeed, i would like to inrease the RGB values of my radial gradient of my shape every 1 or 3 frames. I did it manually, but its very long. So i would like to know if anyone can help me to make it with code, it's will be most efficient and fast. I've already created my shape with a radial gradient. Now i would like just to increase the RGB values of my radial gradient. Can you help me please!
This code create my shape with a radial gradient:
var radType:String = GradientType.RADIAL;
var radMatrix:Matrix = new Matrix();
radMatrix.createGradientBox(120,120);
var tabCouleurs:Array = [0xFFFFFF, 0xAEAEAE];
var radColours:Array = tabCouleurs;
var radAlphas:Array = [1, 1];
var radRatios:Array = [0, 255];
var gradients:Sprite = new Sprite();
gradients.graphics.beginGradientFill(radType, radColours, radAlphas, radRatios,radMatrix);
gradients.graphics.drawRect(0, 0, 120, 120);
gradients.x = 50;
gradients.y = 50;
addChild(gradients);

Not really sure what you mean by increase RGB values. But if that is what you want to do then that is what you need to do.
clear() your graphics
increase the values
redraw
Nothing particularly difficult there. What is the problem you are having?

How to find RGB values of an image in MIDP 2.0?

Similar Messages

Maybe you are looking for