How to find dynamic value(screen value) in table control for current row .

hi to all,
i used table control in my screen. for column no 2 field i was used serrch help. and for column number 3 i used a dynamic help.
in change mode you can change any row for table control.
when i was using search help for a row which was already entered in column no 3 i cannot get any value.
how i can get value of row no 3 and column no 2 value.
thanks

Try using like index for the serarch the TC-current_line

Similar Messages

How to find out the selected column in Table Control

Hi all,
      How to find out the selected column in Table Control?
Thanks & Regards,
YJR

Hi,
Let your table control name in Screen painter be TC1.
READ TABLE TC1-COLS INTO WA_COLS (some wok area)
             WITH KEY SELECTED = 'X'.
        IF SY-SUBRC = 0.
          CLEAR: W_DUMMY, W_COL_NAME.
          SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                               W_COL_NAME.
        endif.
W_COL_NAME gives you the column name.
Hope it helps.
cheers
sharmistha

Problem in displaying dynamic values in dropdown list for each row

I want to display dynamic values in a drop down list for each row, and these values depends on the column value in each row(ptaid), based on each ptaid i need to fetch values for drop down list. so how can i achieve this..
Thanks
Babu

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

Listbox displaying dynamic values in table control

Hi Experts,
The requirement that I have is that there are two columns in an internal table out of which second one is a listbox.
There is a need of displaying dynamic values in a row in a listbox according to value entered in first column of the same row, not affecting the listbox values in other rows.
I am using VRM_SET_VALUES for populating listbox, but it results in populating the listbox in all other rows also.
Please help.
Thanks,
Garima

Hi Thanks for the link..
But my problem is something else.
I want the same listbox of a column in a table control to show me different values in different rows on the basis of value in another column .
Regards,
Garima

How to add column in table control for transaction APPCREATE

Hi All,
How can i add the additional column in table control for transaction APPCREATE.
There is structure PT1045_EXT present behind table control. But not found any customer exit or badi to display on screen.
Please help...

You can add new columns
If you add new columns in tr. PHAP_CATALOG

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
     you will be having your first program values in internal table or some variables,
    when you are calling the second program you wii use like this,
    SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
                       WITH s_emp(second program select-options)   IN t_emp(first program variables)
                       WITH p_chk   EQ t_chk
                       WITH p_r1    EQ t_r1
                       WITH p_month EQ t_month
                       WITH s_cust1 IN t_cust1
                       WITH p_r2    EQ t_r2
                       WITH s_cust2 IN t_cust2
                       WITH s_week IN t_week
                       AND RETURN.
you have pas like this to get your first program details.

How to find report values using report writer

hi,
Please help me.
How to find report values using report writer
Regards,
RRK.
Edited by: Alvaro Tejada Galindo on Feb 6, 2008 12:01 PM

Thanks all for the reply.
I am trying to solve a problem where report parameter value that is set at Management Console is wiped out after calling replaceConnection.
databaseController.replaceConnection(oldConnectionInfo, newConnectionInfo,
null,DBOptions._doNotVerifyDB);
We have to support changing database connection from a java utility
class. But once replaceConnection is called all existing static parameter values are lost. To fix this issue we thought of getting parameters and values before calling replaceConnection and setting it after replaceConnection.
Version is CS2008 SP3 - version 12.3.0.601
If there is any other option of fixing the original wipe out issue?
ParameterValues.getValues() didn't return value. I will try ParameterValues.getCurrentCalues() but the document says ParameterValues.getValues() is equivalent to the IParameterField.getCurrentValues() method unless it is empty, in which case it is equivalent to the IParameterField.getDefaultValues() method.
So getCurrentValues() may not work.

How to find the Values of SAP Gateway Server Host and Gateway Service Valu

Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
Phanikumar

Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano.

How to correlate dynamic values in OATS

We are getting error in response Header that "content length is zero".
When we compared both resquest and response headers we found that in request content we have values and in response it shows 0 while replaying
Please let us know how to proceed with this problem and as well how to correlate dynamic values in OATS

we resolved ourselfs

How to find these values fall in what time?

Post Author: newcruser
CA Forum: General
From 9 AM to 5 PM time range..how to find these values fall where?.
Is that done using group selection method?. Please give me idea and direction
UserId Type login logout1 1 2008-04-13 09:30:42 2008-04-13 10:30:122 2 2008-04-13 09:30:12 2008-04-13 11:00:323 1 2008-04-13 10:30:32 2008-04-13 12:56:234 2 2008-04-13 10:30:42 2008-04-13 12:00:345 2 2008-04-13 11:30:34 2008-04-13 13:40:236 1 2008-04-13 12:30:43 2008-04-13 13:00:437 1 2008-04-13 13:20:43 2008-04-13 14:45:218 2 2008-04-13 14:30:42 2008-04-13 15:15:599 1 2008-04-13 15:00:42 2008-04-13 16:30:4210 1 2008-04-13 16:20:42 2008-04-13 17:00:00

Post Author: newcruser
CA Forum: General
In my case minimum (login) time changes and maximum(logout) time changes everyday.
I want to create from minimum (login) to maximum(logout) for every hour, how many people are online. How to do?.
UserId login logout1 2008-04-13 09:30:42 2008-04-13 10:30:122 2008-04-13 09:30:12 2008-04-13 11:00:323 2008-04-13 10:30:32 2008-04-13 12:56:234 2008-04-13 10:30:42 2008-04-13 12:00:345 2008-04-13 11:30:34 2008-04-13 13:40:236 2008-04-13 12:30:43 2008-04-13 13:00:437 2008-04-13 13:20:43 2008-04-13 14:45:218 2008-04-13 14:30:42 2008-04-13 15:15:599 2008-04-13 15:00:42 2008-04-13 16:30:4210 2008-04-13 16:20:42 2008-04-13 17:00:00
i found minimum (login) and maximum(logout) using below formula. Now i want to find every hour from minimum (login) to maximum(logout) , so i can use each hour value in formula to calculate how many people are online for that particular time. How to do that?.
@Minimum
DatePart("h",(Minimum ()))
@Maximum
DatePart("h",(Maximum()))

How to find where the screen field is stored in table

Hi all,
How to find where the screen field is stored in the table .
for some transactions if i press F1 on the field and after checking for the technical help.
I can only find the struture for the screen field, but whereas i need table name for it.
Can anybody help me how to find the table name where the field is stored.
Regards,
Madhavi

Hi,
Just hitting a F1 on screen field and getting structure name will not help in getting table name.
First you need to know the flow of data in the reqd module, which will help you know all the tables in that module with there most of the fields with the data flow, now you need to work on your own to figure out that in which actual tables that value is stored.
Hope this helps you.
Regards,
Tarun

How to insert values in table control & how to place listbox in table ctrl

Dear all,
            I have created table control in Module pool program. My requirement is first
               1)How to place list box in table control
               2)Based on listbox selection i have to enter values in table control row..
With Regards,
Baskaran

Hi Baskaran,
For displaing list box, use FM: VRM_SET_VALUES.
Code like that:
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: ps_parm(10) AS LISTBOX VISIBLE LENGTH 15.
Instead of parameter for module pool , you declare data:
AT SELECTION-SCREEN OUTPUT.
name = 'PS_PARM'.
value-key = '3500000002'.
value-text = '3500000002'.
APPEND value TO list.
value-key = '3500000003'.
value-text = '3500000003'.
APPEND value TO list.
name = 'PS_PARM'.
value-key = '3500000004'.
value-text = '3500000004'.
APPEND value TO list.
name = 'PS_PARM'.
value-key = '3000000007'.
value-text = '3000000007'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = name
      values = list.
make the necesary change for module pool.
Hope this can solve your problems.
Regards,
Tutun

Dynamically changing the value in table control

Hello Every one,
In MD61 transaction table control am trying to change value dynamicaly i.e am trying to change value in table control automaticaly tht value to be captured and i need to show in status bar...
Ex table control field is number: am giving 10,20,30 tht should show in status bar by adding if u enter 10 at status bar it show 10 then when u enter 20 it should add with 10 and give 30 ..
in this way when ever u enter value in filed it should add with the status bar value.

Hi!
For conversion you can use the function module
data :   w_amt         TYPE cms_dte_original_amt,
                                                                                " Amount
            w_conv_amt    TYPE cms_dte_conv_amt,
                                                                                " Converted amount
            w_kmein       TYPE cms_dte_original_curr,
   CALL FUNCTION 'CMS_API_CURR_CONV'
        EXPORTING
          i_original_curr = w_kmein
          i_original_amt = w_amt
          i_result_curr   = 'INR'
          i_rate_type     = 'M'
          i_conv_date     = sy-datum
        IMPORTING
          e_conv_amt      = w_conv_amt.
now accordingly you can move the currency and amount that is changed....
here as you were saying that on f4 after selecting you want the other field to get the value on that currency.....
this work can be done as here....
in this the next field gets populated as the first field gets the value......
refer to it.....
https://wiki.sdn.sap.com/wiki/display/ABAP/GettingainputfieldpopulatedonenteringthevalueinoneInputfield
Regards.

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

Retrieving values from table control using DYNP_VALUES_READ

Hi all,
I am trying to retrieve the values from the table control using the FM DYNP_VALUES_READ. I have a situation where user enter values in table control in T.code FB60 in Withholding tab for validation purpose. There i'll have to check based on some entries maintained in SET.
I am unable to get the values when i scroll to the next page in the table control. FM raising an exception invalid_dynprofield.
Expecting reply...

You have to populate the dynpfields internal table before calling the function,
data: repid like sy-repid.
dynpfields-fieldname = 'PNAME'.
append dynpfields.
repid = sy-repid.
call function 'DYNP_VALUES_READ'
exporting
dyname = repid
dynumb = sy-dynnr
tables
dynpfields = dynpfields
exceptions
others.
read table dynpfields index 1.
pname = dynpfields-fieldvalue.
Now you will have the field value in pname
Hope this helps
Vinodh Balakrishnan

How to find dynamic value(screen value) in table control for current row .

Similar Messages

Maybe you are looking for