How to find service port oracle use.. for http... ftp.. ?

Can any one tell me how to find what services ports does oracel uses for services like HTTP and FTP... ?
Is there any commad that I can execute on SQL*PLUS console to find that ???

Depends on the version of Oracle.
If Oracle XE, or you are using XDB capability, you use
SELECT dbms_xdb.gethttpport(), dbms_xdb.getftpport() from dual;
and verify using lsnrctl status
Otherwise you look at the Apache config files in $ORACLE_HOME/Apache/Apache/conf/httpd.*

Similar Messages

How to find all the infotypes used for LSO?

Folks,
Can anyone help me on how to find the related infotypes used for LSO?
Thank
S

Hi,
In addition to puneet's information:
Training and Event Mgmt infotypes:
    Prices (Infotype 1021)
    Availability Indicators (Infotype 1023)
    Capacity (Infotype 1024)
    Depreciation Meter/Validity (Infotype 1025)
    Business Event Info (Infotype 1026)
    Site-Dependent Additional Info (Infotype 1027)
    Address (Infotype 1028)
    Business Event Type Info (Infotype 1029)
    Procedure (Infotype 1030)
    Mail Address (Infotype 1032)
    Name Format (Infotype 1034)
    Schedule (Infotype 1035)
    Costs (Infotype 1036)
    Billing/Allocation Info (Infotype 1037)
    Business Event Blocks (Infotype 1041)
    Schedule Model (Infotype 1042)
    Demand (Infotype 1060)
    Web Link (Infotype 1061)
    Knowledge Link (Infotype 1062)
    Business Event Group Info (Infotype 1063)
Thanks,
Anil.G

Which ports oracle use for replication..

Hi All,
I want to know which ports orcale use for replication.plz reply me quickly.
Thanx in advance

This is configurable. By default, listeners will run on port 1521, but sites can specify multiple and/or different ports. Depending on the OS of the database, connections made on that initial port may be redirected to a different port (Windows) or may do all the communication on the listener port (Unix). Windows databases can be configured to do all communication on the listener port, though there may be a performance impact to doing so.
Justin

How to find what port is used by a process ?

a) How can we find out if a port, say, '1525', is used by a process ?
How can we find out the process ID ?
b) Given a process ID, can we find out what port(s) it is currrently
using ?
Any Unix commands in 2.5.1-->8 ?
thanks.

Hi
The best bet for doing this is "lsof" utility that is a freeware which
can be downloaded from http://www.sunfreeware.com.
You can map ports to process like this...
<PRE>
./lsof -i tcp:23
COMMAND PID USER FD TYPE DEVICE SIZE/OFF INODE NAME
inetd 152 root 5u inet 0xf596f638 0t0 TCP *:telnet (LISTEN)
in.telnet 13164 root 0u inet 0xf605cc70 0t139 TCP collard:telnet->awe185-130.junk.COM:34412 (ESTABLISHED)
in.telnet 13164 root 1u inet 0xf605cc70 0t139 TCP collard:telnet->awe185-130.junk.COM:34412 (ESTABLISHED)
in.telnet 13164 root 2u inet 0xf605cc70 0t139 TCP collard:telnet->awe185-130.junk.COM:34412 (ESTABLISHED)
</PRE>
HTH
Shridhar

How can i get the port used for https

Hi All,
does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
we have following settings:
server port: ??
Web Protocol: https://
Thanks for suggestions!
Karol

Hi Karol,
by navigating to:
Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
you can change the Webprotocol to http:// and set server port to 50000 (default port).
To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
Hope this helps,
Robert

How do I find out how much disc space I'm using for various items such as Mail, iPhoto, iTunes, documents, etc.

how do I find out how much disc space I'm using for various items such as iPhoto, Mail, Apps, documents, etc ? thanks

Or you can download OmniDiskSweeper (free). It will list your disc usage in order of size and you can follow the paths to find individual files or applications.

How do i find panels i can use for editing?

macpro   16 g ram 2   1t HD, OSX 10.9.4-
L R -on trial basis,
how to generate panels i can use for editing--watched tutorial "How to get rid of something -in a photo--using a new tool"
but can't find how to get to those panels
please help     & thanks
also can't determine how to keep catalog from one session to next--is that cause it is a trial?

You either need to give us the link to that tutorial, or state the EXACT name of the tool/exact name of the panel that they are using.
also can't determine how to keep catalog from one session to next--is that cause it is a trial?
The trial is identical to the full purchased program. Please explain this problem in more detail.

How to find and install right java for ECC6 intstallation on AIX5.3

Hello
I wander how to find and install right java for ECC6 intstallation on AIX5.3. I went thruroughly thru note 723909 and underlying 716927, 1008311 and 1039948 notes but I still do not understand.
I guess I should logon to IBM site http://www.ibm.com/developerworks/java/jdk/aix/service.html
where I can choose :
" Java 1.4.2 64-bit "
and then :
"64-bit SDK 1.4.2 base images (at 1.4.2.0 level; in installp format) "->"Base SDK (required)
Java14_64.sdk.tar ((50001920)
then I assume (on AIX ) I should "tar xvf Java14_64.sdk.tar".
then I get extracted "Java14_64.sdk"
Is this ok?
I know on Linux(
from IBM site I downloaded "IBMJava2-amd64-142.rpm"
then I issued
"rpm -i IBMJava2-amd64-142.rpm "
and finally issued
"export JAVA_HOME=/opt/IBMJava2-amd64-142")
What in case of AIX5.3? Could you help me?

I was told to use smitty (just I am not familiar with it). furdermore i do not hace read.me file. the ziped files are:
Java14_64.ext
-rw-rr 1 202 bin    371712 Mar 2 2010 Java14_64.license
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.ja_JP
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.Ja_JP
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.ko_KR
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.zh_CN
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.Zh_CN
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.zh_TW
-rw-rr 1 202 bin      3072 Mar 2 2010 Java14_64.msg.Zh_TW
-rw-rr 1 202 bin   4888576 Mar 2 2010 Java14_64.samples
-rw-r----- 1 root root 67190784 Oct 4 09:53 Java14_64.sdk
-rw-rr 1 root root 77370639 Nov 20 19:36 Java14_64.sdk.tar.gz
-rw-r----- 1 root root 12612608 Oct 4 09:53 Java14_64.source

How can a structured frame be used for translating books to foreign languages?

I keep reading about how a structured approach can improve the translation process (from english to foreign languages), however, i can't seem to find specifics about a particular method or tutorials about how to go about it (specifically). My question is, how (specifically) can structured framemaker be used for translation from english to foreign languages? Links to tutorials on this issue would be greatly appreciated. Thank you.

@Ian Proudfood
A well organized XML based project will definitely save translation costs. There are many advantages to the XML approach to translation management including:
Almost zero DTP rework costs - make the EDD/Template do all of the work!
Translation is application version independent - no need to wait for the Translation Memory/CMS system vendor to support the latest version of FrameMaker.
»... a well organized XML based project will definitively save translation costs.« – I have read sentences like this from a lot of consultants. And I have consulted/supported a lot of customers after those consultants left the stage. I always hear more or less the same from all of those clients. No question, I hear a lot of arguments for working with XML in tech doc, most of the arguments you mention included. Most of the tech writers are happy with the new structured FrameMaker and enjoy writing. And, cross your heart: Finally there's no alternative to XML in the long term if you take your tech writer job seriously. No question – working with pure XML in a professional information architecture in a structured, guiding editing environment like FrameMaker is cool, fun, faster and produces more open, more accessible, more reusable, more reliable, more consistent, in a nutshell: more valuable data.
But what I have never ever heard, and I'm talking about several hundred companies, is: We save more money on translation now. You might imagine that this is surprising me since many years. This is why I always ask: Did you save any costs in your translation projects? Surprisingly the answer is always: No. Actually some – no, wait: many – tell me, that their translation agency even charges more now, because they have a lot of new costs:
Costs, to customize their translation memory system to the clients custom xml,
costs to follow badly or not documented changes in the client's xml structure (DTD/Schema changes) in the TMS,
costs because of more engineering work like
valididating xml in advance,
fixing invalid xml exports,
fixing invalid translations due to – sometimes massively – increased amount of tag errors because of tagging differences of "old" (legacy mif) and "new" (xml) tags,
dealing with just too big XML files that need to be carefully split, so that the TMS has a chance to read it, or alternatively:
"glue" the ten-thousand xml "snippets" to more handy chunks,
project managers and translators that need to do additional checks, validations, verifyings - and often not knowing what to do with those cryptic error messages, meaning additional support costs
Of course, many if no all of these and many other problems I did not mention here can be solved. And many are not exactly system immanent problems but communication problems (like introducing or renaming elements/attributes but not documenting this and not communicating this to the translation service provider) or would apply to any system change (e.g. also when switching from Word to Frame). However, I do not know of any single translation company on this planet (and I know virtually thousands of them from countries all over the world) that reduced the price per word for just a single pence, just because the client switched over from Word/Quark/FrameMaker/InDesign/Whatever to XML.
Just ask your translation service provider: Will you charge me less per word if I send you XML instead of MIF? I would really be surprised to hear a "yes". And frankly, if you have ever compared a professional FrameMaker document with the same document in xml format in a professional system like Trados: There is actually no difference that would justify any price difference. The text is the same, the amount of words identical, the number of tags is identical, it even looks identical in the translation system (I can post screenshots if you like). From the translation perspective there is no single reason why a translator should charge a single pence less.
So, it's a modern myth, that switching to xml reduces translation costs. That might be true, if you come from a really medieval documentation szenario with MS Word or the like, with manual formatting without any styles and so on (I see tech docs every day where even the TOC is typed in manually!!!) and swith from there to a modern structured xml authoring in combination with other supporting tools like authoring memory / authoring assistance, controlled language, translation memory and terminology managent and control, snippet based content management and so on. That will increase the consistency and quality of your data, which will reduce translation costs in the long term. But the truth is: This has nothing to do with XML per se, but with professional writing and professional management.
So, what's left in the money saving story? No more DTP in the target languages? I always hear, that with XML and FrameMaker you do not have to "format" the translated document. The truth is: If you have a professionally formatted (unstructured) document, you don't have to take care of it, too. Modern tools like Trados keep 100% of the formatting 100% correct in the translated document. If the underlying template is intelligent enough to take account of text amount changes due to longer translations, and if you don't have too many local formatting overrides, the DTP is actually zero and can be reduced to a few mintes/hours for "flying" of the document to check out for unexpeted problems wich can occure in both structured and unstructured documents.
Just to give some numbers on this: We are processing every day technical documentations for a quite big company. A typical documentation from them is about 250 pages in unstructured FrameMaker 9 (source language is English). Until now they were resistent to all my XML pushing. The Documentation is based on a straight, simple template (with our help "reduced to the max") and there are no formatting overrides (a script automatically checks this). The post translation Quality Assurance effort is - depending on the target language - usually something between 1 to 4 hours – that's a few seconds per page for the languages where already a lot of past Quality Assurance Steps went back into the Translation Memories and up to a minute per page for more "problematic" languages).
So, again: XML will not save you a single pence on translations. But it might help you to produce more open, more accessible, more reusable, more reliable, more consistent, in a nutshell: more valuable data. But if you already have properly set up (ustructured) FrameMaker Documents and already work with a professional translation memory system, you will be quite disappointed to learn, that the impressive money saving promises you recently saw on that great PowerPoint slides melt down to a few bucks over a couple of years.
Kind regards,
Stefan Gentz

How to findout vnc port no. used by the each guest vm

hi,
i am using OVM 2.2.0
how to findout vnc port no. used by the each guest vm using command line on the VM server
thanks in advance..

hi Avi,
Thanks for your reply
i tried but still no success & iam getting the following error
[root@OVM-SERVER-1 ~]# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 543 2 r----- 459.1
test 1 300 1 r----- 13.0
[root@OVM-SERVER-1 ~]# virsh dumpxml
error: command 'dumpxml' requires <domain> option
[root@OVM-SERVER-1 ~]# virsh dumpxml 1
libvir: Remote error : No such file or directory
libvir: warning : Failed to find the network: Is the daemon running ?
libvir: Xen Daemon error : internal error domain information incomplete, missing kernel & bootloader
[root@OVM-SERVER-1 ~]# virsh dumpxml test
libvir: Remote error : No such file or directory
libvir: warning : Failed to find the network: Is the daemon running ?
libvir: Xen Daemon error : internal error domain information incomplete, missing kernel & bootloader

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
 fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 layout TYPE slis_layout_alv,
 variant TYPE disvariant,
 events TYPE slis_t_event WITH HEADER LINE,
 heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
 wa_usertcode TYPE swncaggusertcode,
 wa TYPE zusertcode,
 t_ut TYPE STANDARD TABLE OF zusertcode,
 wa_result TYPE zusertcode,
 t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
 EXPORTING
 component = 'TOTAL'
 ASSIGNDSYS = 'DEV'
 periodtype = 'M'
 periodstrt = month
 TABLES
 usertcode = t_usertcode
 EXCEPTIONS
 no_data_found = 1
 OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
 wa-user = wa_usertcode-account.
 IF wa_usertcode-entry_id+72 = 'T'.
 wa-tcode = wa_usertcode-entry_id.
 wa-report = space.
 ELSE.
 wa-tcode = space.
 wa-report = wa_usertcode-entry_id.
 ENDIF.
 COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
 text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
 text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
 text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
 text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-cprog
 is_layout = layout
 it_fieldcat = fcat[]
 i_save = 'A'
 is_variant = variant
 it_events = events[]
 TABLES
 t_outtab = t_ut
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find that a sales order for which there is delivery but no goods

Hi
How to find that a sales order for which there is delivery but no goods issue has been done i.e we have an open delivery for a sales order.
How in VBUK table can we find out with the sales order no .
Thanks in advance

make use of table VBFA.
Regards
Peram

How to find out what Oracle version?

Hi,
Could anyone tell me how to find out what Oracle version is on your AIX/Unix machine? It looks like Oracle Installer doesn't use the native OS installation(installp,pkgadd) process, so I can't use lslpp/pkginfo to find out what filesets are installed.
Thanks
HQ.

Hi!
As far ar Oracle version is concerned, you can find it at the database level after connecting to the database
select * from v$version;
i am not sure if there is someway to find at the o/s level.
Good luck
null

How to find service port oracle use.. for http... ftp.. ?

Similar Messages

Maybe you are looking for