How to find tables in schema affected after a particular timestamp
Hi Folks,
I have a huge database size needs to be migrated and upgraded across different platforms, I done the initial migration and the upgrade test on the new server successfully to the latest release (11.2.0.4) and the new Oracle server is ready now for the cutover.
Meantime, data files needs to be taken and migrated to the new server again since the tested migrated data is aged out, what's the best way to minimize the the time requires during the process of converting and transporting data from old platform to the new platform. I used RMAN convert and it took me long time though. My source db server is windows, destination is Linux.
Also, I am trying to figure out the way of identifying the schemas which have been affected after a particular timestamp (last convert), so then I can use pump or dump backup to export only the data which was updated after last data convert?
Any advise would be really appreciated
Thanks for any given feedback!
Hi Peter,
Also
Goto SE03........
Requests/tasks...>Find Requests.>Give that request number and Choose Released in Request Status.
U will get the Request itslef.Drill Down to find out the Objects.
Rgds
SVU
Similar Messages
-
How to find the DB schema of XI DB tables to operate on the XI DB table
Hi all,
I have to execute some queries on internal XI DB. For this I need the schema name of the DB table where the data about the message is available. Can anyone tell, how to find the DB schema-name of the DB table? I have PI 7.1 system with internalDB.
How to access the DB of the PI 7.1 system using NWA?
Regards,
SooryaHi,
The PI 7.1 Server shall definitely posses a Database. This Database shall have the ABAP and Java Dictionary tables in 2 different database schemas.You sholud be getting the names of the schema from the basis team supporting your server.
I hope your are referring to the Java DB Schema for access. In order to get the schema name for the Java Dictionary, you should have access to the NetWeaver Adminstrator (NWA) of the PI Server.
Logon to NWA, navigate to Configuration Management --> Infrastructure --> Application Resources. Select the Resurce Type to show as JDBC Drivers. Select the system driver and click on Dependent JDBC Datasources. This table should give you the schema name of the Java Table Storage of the PI 7.1 server.
Regards,
Alka. -
How to find tables from transactions
Hi All,
Please tell me in which tables I can see customer heirarchy(i.e.VDH2N)? I would like to know all tables in which heirarchy 1 ,2 and 3 is stored?
Also let me know how to find table names from transactions or after going to transaction screen?
Thanks
YogeshHi,
Please check table KNVH.
Also you can use BAPI BAPI_CUSTOMER_GET_CHILDREN to get child customers for a customer.
FORM get_child_customers USING iv_cust_no TYPE kna1-kunnr.
* BAPI to get the all Child Customers of the current Customer
CALL FUNCTION 'BAPI_CUSTOMER_GET_CHILDREN'
EXPORTING
valid_on = sy-datum
custhityp = 'A' ( Customer hierarchy type 'A', ... etc.. )
node_level = '00' (node level)
customerno = iv_cust_no ( customer number )
TABLES
node_list = gt_output. ( get the child customers in the list)
ENDFORM. " get_child_customers
Regards,
Ferry Lianto -
How to find table name for the fields from Standard Extractor in CRM system
How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy -
How to find table & fields of standard InfoObject?
Hi
How to find table & fields of standard InfoObject for creating generic DataSource?
e.g. I want to know the table & field of 0MAINTPOS infoObject.You can get the list of tables involved in a particular DS by using the below method ( this another approach)
--> RSA3 -- enter your DS ( execute later)
--> Goto Tcode ST05 --> switch on the SQL Trace
--> now execute the extract checker in RSA3.once done switch off(deactivate) the SQL trace.
--> in st05 screen you can find the button "Display Trace" -- execute (here make sure SQL trace button is enabled.
--> from the menu bar -->Trace list--> select "combined table accesses".
--> it will display the tables involved in it -- check for TABLE names section.... select that row Table names -- click on filter button --press F4 -- here we go it will display the list of entire tables involved in the extraction activity... here you need to sort the tables which are related to your DS. -
How to find tables in Lo that were extracted from R/3 to BW?
Hi Experts,
pls tell me How to find tables in Lo that were extracted from R/3 to BW?
Thanks in advance.
Regards,
Hari ReddyHi
Check the following thread,if the earlier link doesnt work..
How to locate which R/3 table-field is mapped to BW
cheers -
How could I generate sample schema's after 11g r2 installation
Hi,
I appreciate if anybody let me know that how could I generate sample schema's after database installation (11g r2).
Regards,hello
you can download the script in the this link
http://www.oracle.com/technology/obe/obe1013jdev/common/files/sample_schema_scripts.zip
or
sqlplus /nolog
conn / as sysdba
@mksample.sql
regards
zekeriya -
How to find table information for a datasource?
Hi,
Can you please tell me how to find table information for a datasource. I am not getting much help from help.sap.
I am trying to find table information for below datasources. We are creating DSO's for the below mentioned datasources, for some we have standard DSO's(0WBS_O06), for others I am trying to create
0CO_OM_NWA_1,
0CO_OM_NWA_2,
0CO_OM_WBS_1,
0CO_OM_WBS_6
Please help me.
Regards,
Bob.Hi BOB,
Another option to find the table information...
inorder to get the tables names involved in that particular data source follow the below steps.
1) ST05 --> activate the Trace
2) RSA3 --> enter your data source (for ex: 0CO_OM_NWA_1)
3) Execute
4) Now goto ST05 -> deactivate the trace
5) click on Display trace(F7) button
6) Execute
7) It will display the complete SQL trace
8) Now from the Menu "Trace list" --> select "Combined Table Access"
it will display the complete tables list involved in that data source...
From Table name section you can get the list of tables involved in that data source.
I had traced and took the information of tables involved in that data source 0CO_OM_NWA_1
0CO_OM_NWA_1
AFKO Order header data PP orders
AFVC Operation within an order
AUFK Order master data
COSP CO Object: Cost Totals for External Postings
COSPP Transfer of the Order in the COSP Table to the Project
COSS CO Object: Cost Totals for Internal Postings
COSSP Transfer of the Order COSS Table to the Project
COVREF Coverage Reference Table: All Processing Blocks
COVRES Table of Coverage Results
You can follow the same steps and find the tables for the rest.
Regards
KP -
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0?
Hi,
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0? Please let me know.
Thanks,
MonicaHi,
In SRM for all objects like SC ( BUS21210),BID,PO(BUS22010),Confirmation (BUS2203),invoice etc all the data stored
in BBP_PDHGP and BBP_PDBEI tables only, These is no separate tables..
for your reference below are the few SRM tables
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSB Bid Invitation
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISB Bid Invitation/Bid-Specific Item Data
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_H Business Transaction
CRMD_ORDERADM_I Business Transaction Item
CRMD_PARTNER Partners
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
Thanks & Regards,
Prasad S -
How to find tables from database having no partition
Hello Sir,
How to find tables from oracle database having no partitions?
Thank you.
-Mal@SB,
SQL> SELECT OWNER, TABLE_NAME FROM DBA_TABLES
2 MINUS
3 SELECT OWNER, TABLE_NAME FROM DBA_TAB_PARTITIONS;
SELECT OWNER, TABLE_NAME FROM DBA_TAB_PARTITIONS
ERROR at line 3:
ORA-00904: "OWNER": invalid identifier@OP,
select table_name,partitioned from dba_tables where partitioned='YES';
select table_name,partitioned from dba_tables where partitioned='NO';
Regards
Girish Sharma
Edited by: Girish Sharma on Jul 1, 2011 9:27 AM -
How to find out names of reports using a particular view
hi guys,
i am newbie here, i jsut want to know how to find out which reports are using a particular view
many thanks in advance for your helpIf you go to the Properties for the Folder in Discoverer Administrator, there is a Dependents tab that should list any workbooks using the folder. This only works for workbooks saved to the database, so won't help with any created using Discoverer Desktop. If you are gathering statistics and have the The Discoverer V5 EUL business area and its workbooks installed, it can tell you about Folders Used as well. It contains information about queries run whether the workbook is saved to the database or to the file system, but wouldn't contain inforamation about workbooks that had been created but not run.
-
How to find gr details and invoice status for particular list of purchase
Hi,
how to find gr details and invoice status for particular list of purchase orders.
is there any t.code/report for it??Hi,
You use t.code:ME2Nand enter PO number,tn Execute.Now you will have PO details .Now in item details get GR details and Invoice details in purchase order history TAB.
In t.code:MIR5, you can see blocked invoice by selection.
Regards,
Biju K -
How to exclude tables from Schema level replication
Hi All,
I am currently trying to setup Oracle Streams (Oracle 11.1.0.6 on RHEL5) to replicate a schema from one instance to another.
The basic schema level replication is working well, and copying DDL and DML changes without any problems. However there are a couple of tables that I need to exclude from the stream, due to incompatible datatypes.
Does anybody have any ideas or notes on how I could achieve this?? I have been reading the Oracle documentation and find it difficult to follow and confusing, and I have not found any examples in the internet.
Thanks heaps.
GavinWhen you use SCHEMA level rules for capture and need to skip the replication of a few tables, you create rules in the negative rule set for the table.
Here is an example of creating table rules in the negative rule set for the capture process.
begin
dbms_streams_adm.add_table_rules(
table_name => 'schema.table_to_be_skipped',
streams_type => 'CAPTURE',
streams_name => 'your_capture_name',
queue_name => 'strmadmin.capture_queue_name',
include_dml => true,
include_ddl => true,
inclusion_rule => false
end;
table_name parameter identifies the fully qualified table name (schema.table)
streams_name identifies the capture process for which the rules are to be added
queue_name specifies the name of the queue associated with the capture process.
Inclusion_rule=> false indicates that the create rules are to be placed in the negative rule set (ie, skip this table)
include_dml=> true indicates DML changes for the table (ie, skip DML changes for this table)
include_ddl=> true indicates DDL changes for the table (ie, skip DDL changes for this table) -
SD-How to find table of link between delivery and sales order?
Hi Experts,
I have a requirement as below.
In LIPS table (SD document: Delivery: Item data), in this table has one kind data.
One record has maintianed 2 fields PSPNR(Project definition (internal)) and PS_PSP_PNR(Work Breakdown Structure Element (WBS Element)).
How to find sales order number of the above record? Could you tell me which table link the delivery item data and sales order number?
Thanks a lot,
FrankHi frank
Check the following tables VBAP , VAPMA , VBUP . It may help you
Regards
Srinath -
SD-How to find table link of special delivery and sales order number?
Hi Experts,
I have a requirement as below.
In LIPS table (SD document: Delivery: Item data), in this table has one kind data.
One record has maintianed 2 fields PSPNR(Project definition (internal)) and PS_PSP_PNR(Work Breakdown Structure Element (WBS Element)).
How to find sales order number of the above record? Could you tell me which table link the delivery item data and sales order number?
Thanks a lot,
Frankhi,
check this.
[https://forums.sdn.sap.com/click.jspa?searchID=20150250&messageID=3784069]
Maybe you are looking for
-
Outlook 2007 with Exchange 2010SP3 Scheduling assistant "Server unavailable"
Windows Server 2008 R2 Exchange Server 2010 Windows 7 Clients Outlook 2007(fully patched) When a user clicks "Scheduling Assistant" in outlook 2007 you immediately get a message popup saying... "The connection to Microsoft exchange is unavailable. O
-
I have been with Verizon since 1998 and have had numerous customer service issues. The latest has been the worst ever taking over 7 hours on the phone with various customer service reps and supervisors. This issue has NOT been resolved. We have bee
-
Display access for the tcode SCC4
Hi all, I want only the display access for the tcode SCC4. In which authorization object I can do this. Regards, R.Suganya
-
Convert from BigInteger object to BigInteger[]????
hi all, I have some list of integers as string and I change them to BigInteger object like: BigInteger myint=new BigInteger(mytext); Now I need to pass myint to a function which accpets BigInteger[] as argument. public static String Decrypt(BigIntege
-
Safari crashes when I quit the program
This has been happening for a while now and drives me crazy! Everytime I close 1 browser window the whole program crashes. It also generates a crash report everytime I quit the whole program. I have attached the last report. Thanks Date/Time: 2006-09