How to find the button is enable/disabled by sql coding

Hello friends,
How can i find a button is disabled or enabled state by plsql coding ?
I have a requirement to ckeck out the user try to close login window without click out button..I should make a warning message to user when he try to close window improperly..Pls help me

Hi
ur requirement is not clear...
How can i find a button is disabled or enabled state by plsql coding ?
IF ur_condition THEN
SET_ITEM_INSTANCE_PROPERTY('BLK_NAME.ITEM_NAME',NAVIGABLE,PROPERTY_TRUE);
ELSE
SET_ITEM_INSTANCE_PROPERTY('BLK_NAME.ITEM_NAME',NAVIGABLE,PROPERTY_FALSE);
END IF;
REgards,
Abdetu..

Similar Messages

How to make the custom field enable/disable in ME21n/ME22n/ME23n trans

Hi Experts,
I need help.
I have created one custom field in the transaction ME21n/ME22n/ME23n under customer data 2 tab. But my problem is the field is always in enable (means editable only) even in Display mode. How to make the field is non editable in display mode and editable in change mode.
I have tried by putting some logic to make that field to change alternatively according to change/display button. And it is working fine but if we click any othe button , this field is becoming editable even in display mode.
How to make this field to behave as standard fields?
Please reply me <removed by moderator>
Thank you in advance.
Best Regards,
Divakar.
Edited by: Thomas Zloch on Mar 2, 2012

If you have BADI implimented for custom tabs then you can do this in method ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM
lv_changeable = im_header->is_changeable( ).
LOOP AT ch_fieldselection ASSIGNING <fs>
 IF lv_changeable IS INITIAL.
 <fs>-fieldstatus = '*'. " Display
 ELSE.
 <fs>-fieldstatus = '+'. " Change
 ENDIF.
endloop.

How to find the number of executions of a sql oracle 10g

Is there any script handy which is useful to get the number of executions of a sql in particualr time in a rac environment.

A lot depends on what time period you're trying to count the executions over...
In V$SQL, there is a column EXECUTIONS that will count the number of executions since the SQL statement was loaded into the shared pool, which may be too long a period or too short a period for your question.
If you are trying to get historical information and you have licensed the performance & tuning pack so that you can get the AWR, you could query the DBA_HIST_SQLSTAT table over an appropriate set of SNAP_ID's to get the totals for an arbitrary period of time.
Justin

How to use a radio button in enabling/disabling a text box in report progra

Hi,
    Could any please let me know, how to use a radio button in enabling/disabling a text box in report program.

*& Report ZMR_RADIO_BUTTONS
REPORT ZMR_RADIO_BUTTONS.
PARAMETERS : R1 RADIOBUTTON GROUP G1,
             R2 RADIOBUTTON GROUP G1.
PARAMETERS : A1 TYPE I,
             A2 TYPE I.
AT SELECTION-SCREEN OUTPUT.
*initialization.
IF R1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
ENDLOOP.
ENDIF.
IF R2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 1.
ENDIF.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
    SCREEN-ACTIVE = 0.
ENDIF.
modify screen.
ENDLOOP.
ENDIF.
START-OF-SELECTION.
*IF R1 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A1'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 1.
ENDIF.
*ENDLOOP.
*ENDIF.
*IF R2 = 'X'.
*LOOP AT SCREEN.
IF SCREEN-NAME = 'A2'.
   SCREEN-INPUT = 0.
   SCREEN-ACTIVE = 0.
ENDIF.
*ENDLOOP.
*ENDIF.

How to find the list of Queries for that have statistics enabled in the sys

Hi ,
How to find the list of Queries that have statistics enabled on them in the system.
Please help me in this regard
Thanks
Maruthi

hi ,
I found three options there like
X - on
D - Default
off
can you please expalin the difference between on and Default
Thanks in Advance
Maruthi

TS2972 used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10. Now with V11, cant find the button that compares two libraries and finds the songs that are different. Anyone know how to do th

Used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10. Now with V11, cant find the button that compares two libraries and finds the songs that are different. Anyone know how to do this now?

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

How to find the API for "update" button

Hi,
I have a jsp page in JTT(JTF) framework on which an UPDATE button exists.
I want to add two more fields and the data in those also must be updated to the database.
So for this i need to find the API which the Update Button calling.
Please guide me how to find the API.
The below is the code segment for the Update button.
function xsubmitForm(){
//alert("oldStatusCode is " + "<%=oldStatusCode%>" );
var newStatusCode = getElementValue( document.forms['<%=asfPage.getHTMLFormName()%>'].elements['<%=PageWebBean.makeName(oppCloseForm.getSectionName(),PageWebBean.OBJ,"statusCode")%>']);
//alert("newStatusCode is " + newStatusCode);
if (( "<%=openStatusFlag%>" == "Y") && ( newStatusCode == "<%=oldStatusCode%>"))
if (confirm(<%=MessageUtil.getMessageJSVar(asfPage, "ASF", "ASF_OPP_STATUS_OPEN")%>))
doAsfAction('<%=asfPage.getHTMLFormName()%>', 'UPD');
else
doAsfAction('<%=asfPage.getHTMLFormName()%>', 'UPD');
Best Regards,
Venkatesh
Edited by: Palepu on May 17, 2010 12:22 AM

Hi,
Post your question in "Technology - OA Framework" forum for a better/faster response.
Technology - OA Framework
http://forums.oracle.com/forums/category.jspa?categoryID=3
Thanks,
Hussein

How can I find the buttons that there are in Searchaccount view IUICMD ??

Hello experts,
Could you tell my where can I find the buttons ("Search", "Reset", "Create Account") that appear in the view "SearchAccount", please could help me??
Thanks in advance.

Hi,
Go to the Search Account View IMPL class-CL_IUICMD_SEARCHACCOUNT_IMPL.There you will find the method DO_INIT_CONTEXT.Inside that method, coding is there to place buttons on the view.
The buttons can be placed anywhere-DO_Prepare_output,Do_init_context or IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS method in the IMPL class.So you can either try looking into these methods or you can look into the html coding.There you will find a variable called gt_buttons(not always, but mostly it will be there).You can use the where-used-list of gt_buttons to find where it is getting filled.
Hope this helps!
Regards,
Rohit

How to Deactivate the Button in Application Toolbar

Dear ABAPers,
             I would like to deactivate the Release button in CO01 Transaction.How to do this.Please Help me to solve this problem.
Thanks & Regards,
Ashok.

Hi,
You can do it 2 ways,
One is
Code a Function code for the button in the Application toolbar that you want to disable.
For example, I am trying to disable the SAVE button on the Application toolbar. The Function Code that I have coded is 'SAVE'.
module STATUS_0100 output.
     APPEND 'SAVE' TO T_PFSTATUS.
SET PF-STATUS 'STATUS' EXCLUDING T_PFSTATUS.
endmodule.                 " STATUS_0100 OUTPUT
The second way is to create a transaction variant using SHD0
Give the Transaction code(ZTRAN) for which you want to create a variant -> name of some variant (ZVAR) -> create -> takes you to your transaction -> enter -> Menu Functions -> Double click on the button that you want to deactivate -> it turns yellow -> Click on Exit and Save -> Save and go back -> You can see a screen variant created (ZVAR_0100)
Now Goto -> Create variant transaction -> Give your transaction variant name (ZVAR) -> Select Transaction with variant -> Takes you to SE93 transaction -> The transaction variant name appears -> save
Now your new transaction is ZVAR -> Execute it and you will find the button deactivated
Check this for verifications
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/132f9803d76f40e10000000a422035/content.htm]

Steals ipad, how to find the IMEI 013216007444380

Steals ipad,how to find the Imei 013216007444380

You can't locate an iPad via its IMEI number, unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

How to find the server hosting office communication ?

Hello
How to find the server hosting office communication ?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hello,
I have:
DG URL Internal;https://OCS.ad.xxxxxx.xxxx.xxx/GroupExpansion/Int/service.asmx;--;
DG URL External;;--;
Quality Metrics URI;;--;
URL Internal From Server;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
URL External From Server;;--;
Voice mail URI;sip:[email protected];opaque=app:voicemail;--;
MRAS Server;;Not Configured;
GAL Status;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
Controlled Phones;TRUE;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Focus Factory;sip:[email protected];gruu;opaque=app:conf:focusfactory;--;
Telephony Mode;Telephony Mode Disabled;--;
Line;;--;
Line Configured From;Auto Line Configuration;--;
Location Profile;;--;
Local Log Folder;C:\Users\me\tracing;;
MAPI Information;MAPI Status OK;MAPI Status OK;
Inside User Status;TRUE;;
Auto Update Download Started;--;--;
Auto Update Download Completed;--;--;
Last Auto Update Request;--;--;
Pairing State;Communicator cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
I see my email on the sip line but no server... what do I miss?
Is it by the URL?
Thanks,
Dom

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
 O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
 /↑\ Fks
 O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
 ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
 child.constraint_name fk,
 child.table_name child,
 child.r_constraint_name pk,
 father.table_name father
 from all_constraints father, all_constraints child
 where child.r_owner = father.owner
 and child.r_constraint_name = father.constraint_name
 and father.constraint_type in ('P', 'U')
 and child.constraint_type = 'R'
 and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
 and child.table_name = aux.child
 and father.constraint_name = aux.pk
 and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, IN RED):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
 identified by philips';
select granted_role bulk collect
 into cRoles
 from user_role_privs
 where username = user;
for i in cRoles.first .. cRoles.count loop
 execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
 constraint root1_id_pk primary key(root1_id)
 enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
 before delete or insert or update on philips.root1
 begin
 null;
 end;
create table philips.root2(root2_id number,
 constraint root2_id_pk primary key(root2_id)
 enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
 before delete or insert or update on philips.root2
 begin
 null;
 end;
create table philips.node1(node1_id number,
 root1_id number,
 node2_id number,
 node4_id number,
 constraint node1_id_pk primary key(node1_id)
 enable,
 constraint n1_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n1_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable,
 constraint n1_n4_id_fk foreign key(node4_id)
 references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
 before delete or insert or update on philips.node1
 begin
 null;
 end;
create table philips.node2(node2_id number,
 root1_id number,
 node3_id number,
 constraint node2_id_pk primary key(node2_id)
 enable,
 constraint n2_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n2_n3_id_fk foreign key(node3_id)
 references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
 before delete or insert or update on philips.node2
 begin
 null;
 end;
create table philips.node3(node3_id number,
 root2_id number,
 constraint node3_id_pk primary key(node3_id)
 enable,
 constraint n3_r2_id_fk foreign key(root2_id)
 references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
 before delete or insert or update on philips.node3
 begin
 null;
 end;
create table philips.node4(node4_id number,
 node2_id number,
 constraint node4_id_pk primary key(node4_id)
 enable,
 constraint n4_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
 before delete or insert or update on philips.node4
 begin
 null;
 end;
-- out of the relational model
create table philips.node5(node5_id number,
 constraint node5_id_pk primary key(node5_id)
 enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
 before delete or insert or update on philips.node5
 begin
 null;
 end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
 aExportTablesPhilips utl_file.file_type := null; -- file to write DDL of tables
 aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
 aExportIndexesPhilips utl_file.file_type := null; -- file to write DDL of indexes
 aExportGrantsPhilips utl_file.file_type := null; -- file to write DDL of grants
 aExportTriggersPhilips utl_file.file_type := null; -- file to write DDL of triggers
 sDirectory varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
 cTables udt_tables; -- collection to store table names for the relational depth
begin
 -- omits all referential constraints:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
 -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
 -- append a SQL terminator (; or /) to each DDL statement:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
 -- create/open files for export DDL:
 aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
 aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
 aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
 aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
 aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
 select d.table_name bulk collect
 into cTables -- collection with the names of tables in the schema philips
 from all_tables t, philips.dictionary d
 where owner = 'PHILIPS'
 and t.table_name = d.table_name;
 -- execution
 sp_seeks_ddl(aExportTablesPhilips,
 aExportReferencesPhilips,
 aExportIndexesPhilips,
 aExportGrantsPhilips,
 aExportTriggersPhilips,
 cTables);
 -- closes all files
 utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips in utl_file.file_type,
 aExportReferencesPhilips in utl_file.file_type,
 aExportIndexesPhilips in utl_file.file_type,
 aExportGrantsPhilips in utl_file.file_type,
 aExportTriggersPhilips in utl_file.file_type,
 cTables in out nocopy udt_tables) is
 cDDL clob := null; -- colletion to save DDL
 plIndex pls_integer := null;
 sTableName varchar(30) := null;
begin
 for i in cTables.first .. cTables.count loop
 plIndex := i;
 sTableName := cTables(plIndex);
 * Retrieves the DDL and the dependent DDL into cDDL clob *
 * for the selected table in the collection, and writes to file.*
 begin
 cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTablesPHILIPS, cDDL);
 exception
 when dbms_metadata.object_not_found then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportReferencesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportIndexesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportGrantsPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTriggersPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
 cDDL in out nocopy clob) is
 pLengthDDL pls_integer := length(cDDL);
 plQuotient pls_integer := null;
 plRemainder pls_integer := null;
begin
 * Register variables to control the amount of lines needed *
 * for each DDL and the remaining characters to the last row. *
 select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
 into plQuotient, plRemainder
 from dual;
 * Join DDL in the export file. *
 * ps. 32766 characters + 1 character for each line break. *
 -- if the size of the DDL is greater than or equal to limit the line ...
 if plQuotient >= 1 then
 -- loops for substring (lines of 32766 characters + 1 break character):
 for i in 1 .. plQuotient loop
 utl_file.put_line(aExport, substr(cDDL, 1, 32766));
 -- removes the last line, of clob, recorded in the buffer:
 cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
 end loop;
 end if;
 * If any remains or the number of characters is less than the threshold (quotient = 0), *
 * no need to substring. *
 if plRemainder > 0 then
 utl_file.put_line(aExport, cDDL);
 end if;
 -- record DDL buffered in the export file:
 utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?

How to find the driver preogram of a smart form.

Hi experts,
I am developing a smart form for RFQ. There is a standard smartform that SAP has provided for this. But the problem is i dont know how to find the driver program of this smart form. The name of the smart form is /SMB40/MMRFQ_L. it will be of great help if u can reply quickly. Thanks in advance.
regards,
venkat.

1. Go to nace
2. select application as EA
3. click output type button and select output type as NEU
4. double click on processing routines
5. Application - EA
 Output Types - NEU (RFQ)
 Smart Form Program - /SMB40/FM06P
 Smart Form - /SMB40/MMRFQ_L
 /SMB40/MMRFQ_A
if u want to directly see without going to nace
1. in se11 give view name as VN_TNAPR
2. execute it
3. it will ask for o/p type and application give it
4. then u can directly go to nace "display view processing routines" screen

How to find the form name from VA02 T.code

how to find the form name from VA02 T.code

Hi Rajyam,
I guess you are looking out for the formname which prints sales related documents.
If this is what you want,then go to the T-code NACE and select the option K1Sales activities and click on the Output Types button on the top.The new window has all the types of Output types listed.Select the most appropriate and double click on the Processing routines button in the left side screen.
The new window lists the program names and the forms associated with that output type.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

How to find the button is enable/disabled by sql coding

Similar Messages

Maybe you are looking for