How to find the exact time backup run

Hi,
I would like to know the specific date ( hour + minute) a backup was executed.
For example the output of rman command : list backup of database;
show Completion Time : 08-MAY-12 . I would like to get the exact time .
Please advice.
BS Key Type LV Size Device Type Elapsed Time Completion Time
33627 Incr 1 256.00K SBT_TAPE 00:00:05 08-MAY-12 <<<<<<======
 BP Key: 33994 Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332
 Handle: bzq1<bzq1_inc_889661:782699508:1>.dbf Media:
List of Datafiles in backup set 33627
File LV Type Ckp SCN Ckp Time Name
279 1 Incr 8042759810240 08-MAY-12 /bzq1/oracalls_2011_data2/y0211pricing_internet04.dbf
.....Thanks

I took level 0 rman database backup.
The problem is that there are also level 1 backup which seems to be run at the very same time.
For eample :
BS Key Type LV Size Device Type Elapsed Time Completion Time
31891 Incr 1 3.00M SBT_TAPE 00:01:25 07-MAY-12 <<<<<=== level 1
 BP Key: 32278 Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332
 Handle: bzq1<bzq1_inc_889062:782696160:1>.dbf Media:
List of Datafiles in backup set 31891
File LV Type Ckp SCN Ckp Time Name
103 1 Incr 8042758295621 07-MAY-12 /bzq1/oradata3/data06_ts_17.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
31892 Incr 0 1.18G SBT_TAPE 00:00:34 07-MAY-12 <<<<<=== level 0
 BP Key: 32279 Status: AVAILABLE Compressed: NO Tag: TAG20120507T200203
 Handle: bzq1_full<bzq1_889069:782696225:1>.dbf Media:
List of Datafiles in backup set 31892
File LV Type Ckp SCN Ckp Time Name
528 0 Incr 8042758303427 07-MAY-12 /bzq1/oracalls_2011_data3/q311_calls_ts_10.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
31893 Incr 1 256.00K SBT_TAPE 00:01:24 07-MAY-12 <<<<<=== level 1
 BP Key: 32280 Status: AVAILABLE Compressed: NO Tag: TAG20120507T230332
 Handle: bzq1<bzq1_inc_889065:782696196:1>.dbf Media:
List of Datafiles in backup set 31893
File LV Type Ckp SCN Ckp Time Name
154 1 Incr 8042758299495 07-MAY-12 /bzq1/oradata5/tc_deb_cred_tb_11.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
31894 Incr 0 1.36G SBT_TAPE 00:01:55 07-MAY-12 <<<<<=== level 0
 BP Key: 32281 Status: AVAILABLE Compressed: NO Tag: TAG20120507T200203
 Handle: bzq1_full<bzq1_889064:782696169:1>.dbf Media:
List of Datafiles in backup set 31894
File LV Type Ckp SCN Ckp Time Name
576 0 Incr 8042758296792 07-MAY-12 /bzq1/oracalls_2012_indx1/Q112_icalls_ts_07.dbf

Similar Messages

How to get the exact time when condition records has been created?

Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
Hrishi

Dear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali.

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the Latency time in java.

How to find the Latency time in java.

long start = System.currentTimeMillis();
doTheWork();
long durationInMillis = System.currentTimeMillis() - start;You might repeat doTheWork() several (100-1000 or more) times if it is fast and the granularity of your system clock is not good enough.

How to find the processing time of any query?

im using oracle express edition, can anyone help me, how to find the processing time of any query?

Trace the query and tkprof the generated trace file.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16638/sqltrace.htm#PFGRF01010

How to find the SQL Server Instances running across the given activer directory domain?

How to find the SQL Server Instances running across the given activer directory domain?
I have though of OSQL -L , Microsoft Assessment and Planning ( MAP ) tool and SQLPing3 (SQLSecurity) might help me.
I would appreciate if there any other way of finding the SQL Servers / Instances running across the given active directory domain.
Sivaprasad S
http://sivasql.blogspot.com
Please click the Mark as Answer button if a post solves your problem!

Dear ,
Very simple u find all instances through the customized sp which is get all details about inventory. Like i put the sp bellow. This is without any tool.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[DBStatus] Script Date: 08-01-2015 19:46:11 By Damodar Patle Sr. DBA Mumbai India ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[DBStatus]
AS
SELECT
SERVERPROPERTY('servername') AS ServerName,
ConnectionProperty('local_net_address') AS 'local_net_address',
ConnectionProperty('local_tcp_port') AS 'local_tcp_port',
CONVERT(VARCHAR(25), @@VERSION) as VERSIONSQL,
SERVERPROPERTY('ErrorLogFileName') AS ErrorLogFilePath,
database_id,
CONVERT(VARCHAR(25), DB.name) AS DBName,
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'status')) AS [Status],
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'Recovery')) AS [Recovery_Model],
create_date as DBCreate_Date, --physical_device_name,
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS DataFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS [Data MB],
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LogFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS [Log MB],
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS MDF_File_Location,
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LDF_File_Location,
user_access_desc
FROM sys.databases DB
ORDER BY dbName, [Log MB] DESC, NAME

Is there a way to find exactly when a certain web page was visited? I know if I go to Tools/Page Info, I can see how many times that page was visited, but I would like to know if I can find the exact time and date. Thank you.

I am using Firefox version 3.6.13

You can find the last time a web page was visited by using the Library.
In the History menu select "Show All History" to open the Library. You can use the Library to view the history, and by default it will show the last date & time the site was visited. If the Visit Date column is not visible, within the Library select Views, then Show Columns, then Visit date to display that column.

How to find the exact user exit in enhancement.

Hi All,
I am in learning phase. I am working on TCODE VA01 and want to change the PO Date. But i am unable to find out the exact user exit. If somebody could guide me that what is the procedure to find the exact user exit for a perticular field or like that. I am know how to find all the enhancements in the TCODE.

hi
Run this program and give the tcode and it will list down all the user exits for that Tcode.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir,            modsapt,            modact,            trdir,             tfdir,      enlfdir,     tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
SELECT SINGLE * FROM tstc    WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir       WHERE pgmid    = 'R3TR'         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir          WHERE pgmid    = 'R3TR'            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir      INTO TABLE jtab      WHERE pgmid    = 'R3TR'        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct      WHERE sprsl EQ sy-langu        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',    20(20) p_tcode,    45(50) tstct-ttext.    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,      2 'Exit Name',      21 sy-vline ,      22 'Description',      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt        WHERE sprsl = sy-langu AND        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,   2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
     SKIP.
     FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards
Sajid
Edited by: shaik sajid on Jun 26, 2009 12:06 PM
Edited by: shaik sajid on Jun 26, 2009 12:10 PM

How to find the exact package that I need?

How can I find the exact package that I need, for example, in Ubuntu, I can add launcher in System -> Preferences -> Main Menu, but in Arch, I can not find this Main Menu, I know I need to install something, but don't know where to go?

Ghost1227 wrote:depends... where are you now?
LOL
pacman -Ss <package-name>
would help you out. You can also put in part of the name and it will return all the matches. As for a GUI -- you don't get that by default in Arch.
There is a GUI wrapper for pacman called shaman, but iirc, it uses kdelibs and integrates well with KDE. It looks like you are using Gnome, but you can use shaman in Gnome too.

Help--how to check the exact time?

Pls help me:
How to check the accurate down-time when the Sun machine (with solaris 8 sparc) abnomally shutdown (eg. power failure)?
or
Is there any way to detect the exact time when I shutdown the Sun machine ?
thanks.

check /var/adm/messages ; uptime ; last ..
there are quite a few method u can use

How to find the exact word in a long text?

Hi,
Scenario:
I have long text containing the system status of the equipment.
Issue:
I need to find the exact word from the list of the statuses. I have tried to use the FIND keyword but it does not work for all the cases.
Example:
 FIND 'REL' IN <status_list> IGNORING CASE.
 if sy-subrc = 0.
 " do something
 endif.
If the status list contains the word 'RELR', the sy-subrc is set to 0 (which may be because it searches the list based on a pattern) but I want to get the exact match.
Can anybody suggest me on this.
Regards
s@k

>
siemens.a.k wrote:
> Dear Kiran, Vasuki,
>
> The data type of status list is char with length 40.
> The status list:
>
> Case 1: list - REL MANC NMAT PRC SETC
> FIND 'REL ' IN <status_list> IGNORING CASE
> the sy-subrc is set to 0
>
> Case2: list - CRTD MSCP NMAT PRC RELR SETC
> FIND 'REL ' IN <status_list> IGNORING CASE
> the sy-subrc is still set to 0 even though the list does not contain the word 'REL'
>
> I have also tried using
> if <status_list> CS 'REL'
> and
> if <status_list> CS 'REL '
>
>
> Please do let me know if I am anyway unclear about issue...:)
>
> Regards
> s@k
This is becacuse when you check
> Case2: list - CRTD MSCP NMAT PRC RELR SETC
It is having RELR so that is the reason you are getting subrc = 0.
>Ok try CS it should work perfectly.
It seems... CS also not the correct answer
(It will count RELR) below thread sachin is correct ...Do that way ....
Regards
sas
Regards
Sas
Edited by: saslove sap on Jan 25, 2010 6:58 AM

How to find the execution time of a query?

hi guys,
i need to find the execution time of a query.
i tried finding it in rsrt but couldn find the execution time.
pleasse let me know the way to do it..
regards
sagar

Hi sagar,
If you want to know the frontend time, first of all you need to maitain the BW Statistics. To maintain you have to go the respective target and click on it. Go to the tools, select BW Statistics of infoprovider. It pop ups a window there you find two check boxes 1) WHM and 2) Front end time. Check both.
Now Exe query and close the analyzer. Then go to SE11 table RSDDSTAT. There is one field which displays Frentend time.
OR
Go to STO3 here also you can analys the frontend time.
If you feel useful Assign Pts.
Regards,
Vishal

How to find the Execution Time for Java Code?

* Hi everyone , i want to calculate the execution time for my process in java
* The following was the ouput for my coding,
O/P:-
This run took 0 Hours ;1.31 Minutes ;78.36 Seconds
*** In the above output , the output should come exactly what hours , minutes and seconds for my process,
but in my code the minutes are converted into seconds(It should not)...
* Here is my coding,
    static long start_time;
    public static void startTime()
        start_time = System.currentTimeMillis();
    public static void endTime()
        DecimalFormat df = new DecimalFormat("##.##");
        long end_time = System.currentTimeMillis();
        float t = end_time - start_time;
        float sec = t / 1000;
        float min = 0, hr = 0;
        if (sec > 60) {
            min = sec / 60;
        if (min > 60) {
            hr = min / 60;
        System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
    }* How to Calcualte exact timing for my process....
* Thanks

* Hi flounder, Is following code will wotk perfectly?
     public static void endTime()
          DecimalFormat df = new DecimalFormat("##.##");
          long end_time = System.currentTimeMillis();
          float t = end_time - start_time;
          float sec = t / 1000;
          float min = 0, hr = 0;
          while(sec >= 60){
     min++;
     sec = sec -60;
     if (min >= 60){
     min = 0; //or min = min -60;
     hr++;
          System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
     }

How to find the Executed time of query

hi,
i want to find out the execution time of query like a sales report executed in 10 min. how to find out that? is there is any TC for that or what is the option to use that?
and how to fing out execution time of Data source to info providers.. or DSOs to IC? like how much time taken to load data?
regards,
preety

Hello Preety,
Goto RSRT give the query name and see the technical property you will find the query generation time.
For the time taken for execution Select the execute and debug mode in the options select display statistics.
Execute the query
Click back
You can see the statistics.
Thanks
Chandran

How to find the missing fonts while running the script?

hi,
I need to create a script to find the missing font. not only for that. Actually i created a script to read the file properties. but i have a problem while running the script.
I have put "User Interation Level" to never interact. Even i need to check wheather each file have "missing fonts". mean time i never stop the script.
Is It Possible???
Regards,
SubhaOviya

Here's a shot of the Find Font Dialog:
Papyrus (highlighted in the list) is missing, and there's a yellow warning triangle to show that. Fonts that ar not missing have an icon to show the type of font. You'll also see it shown as missing in the "Info" box at the bottom of the dialog.
If you use the Replace With dropdown you will only see fonts listed that are installed on the system. In order to actually use the missing font, rather than substitute a different font in its place, you must obtain and install the missing font on the system.
Are you seeing something different when you open Find Font?

How to find the exact time backup run

Similar Messages

Maybe you are looking for