How to find the patch level of a BI 7 system.

Hi Experts,
I am not able to add navigation attributes to an info cube in BI 7 system ....does the patch level applied to the system effect this functionality ? if so how can we upgrade the system?
How can we find the patch level details of a SAP BI 7 system ? The release notes doesnt give any information in regard to the patches. Is there any direct way of getting this information by ourselves without contacting the basis team.
Kindly let me know your valuable suggestions.
Thank you and much appreciated.
Regards,
Sharanya.

Hi Bala and Teja,
Part of my question was answered , Thank you for your help.
I see that the patch level is 17 on our BI 7 system..........but does it effect the functionality to add a navigational attribute to an info cube?
Can you suggest me any possible reasons for this issue, and also any solutions if you have please.
Thank you and much appreciated.
Regards,
Sharanya.

Similar Messages

How to find repository patch level

Hi everyone. I'm wondering if the lh version command gives the patch level of the repository or the file system. I can't find any difinative information that says it is the patch level of the repository. If it is not, how can I find the patch level of the repository?
Thanks.

This works the same for IDM 7 or 8.
while in lh console
issue the installed command
Configurator> installed
Installed Releases
Identity Manager 7.1 (20070523)
Installed Service Packs
Installed Hotfixes
Identity Manager 7.1 HF 13
Identity Manager 7.1 HF 2

How to find the patches for perticular concurrent program

HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank's

Query the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

How to find the patch & version of directory server

How to find version & patch of Sun JES Directory Server.
What does 2005Q4 mean to?

Just look at your errors log file after you start up the directory server. If you are running Directory Server 6.0 you will find a line that looks like this:
Sun-Java(tm)-System-Directory/6.0 B2007.030.1546 (32-bit) starting up
Depending on the version you have it will show something slightly differently.

How to find the toner level for HP LaserJet 1500L Drum and Toner set

You may have lost the original 1500L CD that came with the printer, or bought it second hand.
So how do you find out how much toner or drum fixer remains!
Actually this is a dumb question. The legacy 1500 and 1500L use dumb toner and drum cartages. They have a chip which simply counts the number of pages printed, and when a preset number (as per cartridge size) have been printed, it sends a signal to the printer to replace it. This is ok if you print the average amount of ink per page, but if you print a lot of photos, the cartage will be exhausted before the indicator flashes, and if like the rest of us you print the usual selection of documents etc, then probably about 50 to 25 percent of the toner remains - what a waste!.
Ok - but its kind of nice to know how many pages have been printed.
Do exactly the following:
1) Press the (green) GO and (orange) CANCEL button simultaneously.
This will then print a status and configuration page. The top left hand column will give the number of pages printed. However if you reset the NVRAM to allow you to use up the supplies, then this will be the count of pages printed since this was reset!.

Hello tmsmatt,
Please try the below step...
On the product control panel, press and hold the Resume button ( ) for 2 to 3 seconds.
The printer would print a configuration page and you'd find the info you required in it.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How to find the level of an n-ary tree

I have a n-ary tree. I traverse this tree using Breadth First and using queues to store the nodes that I encounter.
Can anyone tell me how to find the current level I am in this n-ary tree

How do I do that...My mind is drawing a blank totally
This code does a breadth first traversal
private void processTree(Node node) {
LinkedList queue = new LinkedList();
queue.addLast(node);
while (queue.size() > 0) {
     Node node1 =(Node)queue.removeFirst();
     if (node1 != null) {
          processNode(node1);//Do some processing on this node
          NodeList nodeList = node1.getChildNodes();
          for (int i = 0; i < nodeList.getLength(); i++) {
                    queue.addLast(nodeList.item(i));
Using this how can I determine the level. Since Im visiting each node of a particular level how do I know that a level is over and Im now visitng the next level?

How to find the 1(one week) performance of the system

HI every one
in my recent interview he has asked this question
i have checked the sar options through man pages but i couldnt understand ...
can any one please tell me how to find the on week performance report of a system......
please tell me how i can find the performnace reports
Thanks in Advance

Hi.
crontab -l sys
Show, activated or not collecting of performance statistics.
man sa1
The shell script sa1, a variant of sadc, is used to collect
and store data in the binary file /var/adm/sa/sadd, where dd
is the current day.
So you need found file with correct date in /var/adm/sa
Regards.

How to find the Latency time in java.

How to find the Latency time in java.

long start = System.currentTimeMillis();
doTheWork();
long durationInMillis = System.currentTimeMillis() - start;You might repeat doTheWork() several (100-1000 or more) times if it is fast and the granularity of your system clock is not good enough.

How to find the status of an invoice in ECC ?

Hi,
Could anyone please tell me how to find the status of an invoice in ECC system (Parked, posted or saved as completed)
Regards
Prashant Chauhan

HI
MIR6
Regards
Kailas Ugale

What is latest bundle patch level for exadata x3-2 machine? how to find the doc?

We have a exadata x3-2 machine. I have a question: What is latest bundle patch level for exadata x3-2 machine? how to find the doc?
Thanks in advance.

Check note id 888828.1
This has all the infomation you need.

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

How to find the header and item level status of a CRM contract ?

Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]

CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
Pl.reward points.......

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02

hi
HOW TO FIND THE REQUIRED DELIVERY DATE IN VA02.
i want to display this field in my report. what is the fieldname and in which table it is ?

Hi Jyothsna,
There are 2 dates when you say Requested Delivery Date
1. Header level in VBAK-VDATU is the field
2. At item level it is in the schedule line. VBEP-EDATU.
The relationship between item (VBAP ) and schedule line ( VBEP )is 1 to many. But there will be mutiple schedule lines only if you are using the scheduling functionality. Also note to check for confirmed quantity (VBEP-BMENG) to be greater than 0 and use that schedule lines EDATU date as Requested delivery date.
regards,
Advait Gode.

How to find the Semifinished Goods in list of Finished Goods

Hi
I have list of Finished Goods. Tell me how to find the Semi finished Goods used in this finished Goods using Table Level.
Kindly help.
Regards,
Rajkumar.C

Hi,
Have you created a Material BOM for finished product ?
if so all your subcomponents can be semi-finished or finished
you can check in CS02 or MAST table
regards,
santosh

How to find the patch level of a BI 7 system.

Similar Messages

Maybe you are looking for