How to find the quantity of items under WIP job and under PO?

Hi,
How can I find the quantity of the Items that are under:
1. WIP Jobs that are not yet completed?
2. PO that are not yet received?
Kindly help me. If you have proper query for it, let me know.
Regards,
KM

select e1.empno,
        e1.ename,
        e2.direct_managed_employee_count
from emp e1,
         select mgr,
                 count(*) direct_managed_employee_count
           from emp
           group by mgr
        ) e2
where e2.mgr = e1.empno
     EMPNO ENAME      DIRECT_MANAGED_EMPLOYEE_COUNT
      7566 JONES                                  2
      7698 BLAKE                                  5
      7782 CLARK                                  1
      7788 SCOTT                                  1
      7839 KING                                   3
      7902 FORD                                   1
6 rows selected.
SQL> SY.

Similar Messages

How to restrict the quantity & rate of MIRO with MIGO and PO

Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards
Purnesh Sharma

Hi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B

How to find the UWL work item types source system?

Hi Gurus,
How to find the Universal Work List work item types source system?
Thanks in Advance,
Dharani

Hi Dharani,
You can achieve this by personalizing the view for UWL.
Click on right side context menu of iView, click on personalize view
Here you will get list of Available Attributes not Displayed select System ID in that.
Save your settings and now you can see the task is from which system.
This will solve your problem.
Regards
Kedar Kulkarni
Reward points if useful

How to find the Values of SAP Gateway Server Host and Gateway Service Valu

Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
Phanikumar

Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano.

How to Find the Location in Google Maps using Latitude and Longitude

Hai,
I need to find the Location from Google Maps, which is match with the Latitude and Longitude values we are sending.
This will be done by using pure java class i need, can anyone having the sample code for this.
It's Urgent, please help me
Expecting replies...

Yes we were having the performance issues when it is getting locked? in this what i want to know
why it happens suddenly?
or what package this piece of code is calling?
or is there any possiblity of system will degrade the performance like sys user etc...?
where exactly i found the root cause for further analysis?
so that next time onwards if particular objects is locking we come to know why it happens is there any logical false or how do we eliminate this issue last time?
coz in our environment sometimes most of lockings are from the same table?
pls let me know where i have to concentrate for debug and how to troubloshoot and reslove this
sorry for the inconvience.. i m expecting the answer from here. if anybody wants some more info i ll let him know.
as of till now i got some docs i start to read this.
Regards
M.Murali..
Note: will system/sys degrade the performance ?if so how ?

How to find the number of Z or Y programs and amount of code lines?

hi all, I'm trying to find the number of programs on user namespace (Z* or Y*) and the number of coded lines in them. something like report Z_MY_REPORT, lines 582; Include Z_MY_INCLUDE, lines 135.
Exist any standard report to do it or do I have to develop it by myself?
thanks for any suggestion.

If you have to do in urself
DATA: i_reptx TYPE STANDARD TABLE OF textpool WITH HEADER LINE.
READ TEXTPOOL 'ZJ_ALV' INTO i_reptx.
and describe the itab.. and get the lines.
In conjunction with TADIR table to get the program repository.

How to find the Administrator Name of OS X Server, and login to it from the Server app from another Mac?

OS X Mountain Lion 10.8.5 and Server 2.2.2 on both Mac Mini Server and Macbook Pro. They are on the same WiFi network.
I want to use the MBP to manage the Server on Mac Mini Server and use the MacMiniServer to provide Caching Service for my MBP, iPad and iPhone.
The problem:
From the MBP Server app, it asks me the Host Name, Administrator Name and Administrator Password. I cannot get it right. Where can I find it from the Mac Mini Server?
What elese shoudl I do / learn?

Run Server.app on the host itself.
Click on the line on the left for the server itself (probably top or second down)
Click on the 'settings' tab.
Make sure you have 'Enable screen sharing and remote management' ticked.
If it's already ticked ...
Find the address you're using for the 'Host' field and try
ping [thataddress]
as a command in the Terminal on the client computer. Do you get numbers up, or errors ?
Use control-c to quit from the 'ping' command.

How to find the number of Ram modules in M4000 and M3000

Dears,
Hope you all are in best of your health, I would like to know the command to check the number of RAM modules in M4000 or M3000 Sun Sparc Servers. I think it should be via XSCF Console if am correct? I trigger following command *"showhardconf"* got below output.
======================================================================================================
XSCF> showhardconf
SPARC Enterprise M4000;
+ Serial:BCF094403J; Operator_Panel_Switch:Locked;
+ Power_Supply_System:Single; SCF-ID:XSCF#0;
+ System_Power:On; System_Phase:Cabinet Power On;
Domain#0 Domain_Status:Running;
MBU_A Status:Normal; Ver:0101h; Serial:BC0943029D ;
+ FRU-Part-Number:CF00541-0893 06 /541-0893-06 ;
+ Memory_Size:16 GB;
CPUM#0-CHIP#0 Status:Normal; Ver:0401h; Serial:PP093500VY ;
+ FRU-Part-Number:CA06761-D202 E0 /375-3568-05 ;
+ Freq:2.400 GHz; Type:32;
+ Core:4; Strand:2;
CPUM#0-CHIP#1 Status:Normal; Ver:0401h; Serial:PP093500VY ;
+ FRU-Part-Number:CA06761-D202 E0 /375-3568-05 ;
+ Freq:2.400 GHz; Type:32;
+ Core:4; Strand:2;
MEMB#0 Status:Normal; Ver:0101h; Serial:BF0939DFFA ;
+ FRU-Part-Number:CF00541-0545 08 /541-0545-08 ;
MEM#0A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d0372;
+ Type:2A; Size:2 GB;
MEM#1A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d0306;
+ Type:2A; Size:2 GB;
MEM#2A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-438845e9;
+ Type:2A; Size:2 GB;
MEM#3A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d02e9;
+ Type:2A; Size:2 GB;
MEMB#1 Status:Normal; Ver:0101h; Serial:BF0939DKJ6 ;
+ FRU-Part-Number:CF00541-0545 08 /541-0545-08 ;
MEM#0A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d0374;
+ Type:2A; Size:2 GB;
MEM#1A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d037b;
+ Type:2A; Size:2 GB;
MEM#2A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d02f9;
+ Type:2A; Size:2 GB;
MEM#3A Status:Normal;
+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-478d0373;
+ Type:2A; Size:2 GB;
DDC_A#0 Status:Normal;
DDC_A#1 Status:Normal;
DDC_B#0 Status:Normal;
IOU#0 Status:Normal; Ver:0101h; Serial:BF0938DA6R ;
+ FRU-Part-Number:CF00541-2240 05 /541-2240-05 ;
DDC_A#0 Status:Normal;
DDCR Status:Normal;
DDC_B#0 Status:Normal;
PCI#1 Name_Property:SUNW,qlc; Card_Type:Other;
PCI#2 Name_Property:SUNW,qlc; Card_Type:Other;
PCI#3 Name_Property:network; Card_Type:Other;
XSCFU Status:Normal,Active; Ver:0101h; Serial:BF0939DTNJ ;
+ FRU-Part-Number:CF00541-0481 04 /541-0481-04 ;
OPNL Status:Normal; Ver:0101h; Serial:BF0940EAEM ;
+ FRU-Part-Number:CF00541-0850 06 /541-0850-06 ;
PSU#0 Status:Normal; Serial:1357FYG-0911AD02JY;
+ FRU-Part-Number:CF00300-2011 0202 /300-2011-02-02;
+ Power_Status:On; AC:200 V;
PSU#1 Status:Normal; Serial:1357FYG-0911AD02K8;
+ FRU-Part-Number:CF00300-2011 0202 /300-2011-02-02;
+ Power_Status:On; AC:200 V;
FAN_A#0 Status:Normal;
FAN_A#1 Status:Normal;
FANBP_B Status:Normal; Ver:0401h; Serial:BF0940E134 ;
+ FRU-Part-Number:CF00541-3098 01 /541-3098-01 ;
FAN_B#0 Status:Normal;
FAN_B#1 Status:Normal;
==============================================================================================
With the above output I understand that we have the following:-
-> *16GB RAM*
-> We have memory boards **MEMB#0** and **MEMB#1**
-> We have 4 modules on **MEMB#0** and they are following:-
MEM#0A -2GB - if we Upggrade to 4GB what will happen to the existing 2GB RAM?
MEM#1A -2GB- if we Upggrade to 4GB what will happen to the existing 2GB RAM?
MEM#2A -2GB- if we Upggrade to 4GB what will happen to the existing 2GB RAM?
MEM#3A -2GB- if we Upggrade to 4GB what will happen to the existing 2GB RAM?
-> We have 4 modules on **MEMB#1** and they are following:-
MEM#0A -2GB- if we Upggrade to 4GB what will happen to the existing 2GB RAM?
MEM#1A -2GB- if we Upggrade to 4GB what will happen to the existing 2GB RAM?
MEM#2A -2GB - if we Upggrade to 4GB what will happen to the existing 2GB RAM?
MEM#3A -2GB- if we Upggrade to 4GB what will happen to the existing 2GB RAM?
So, I understand that the above server will have 32 GB Ram as our company ordered recently, Correct?
In the specifications of M4000 i see that for these servers we can upgrade he Ram upto 128 GB.
Please guide, any help offerred is appreciated.
Edited by: user9007339 on 26/01/2013 03:14 ص

A Key document is:
http://docs.oracle.com/cd/E19855-01/819-2210-14/819-2210-14.pdf
The m4000 can have 4 memory modules.
Each memory module can contain up to 8 dimms. (Two groups on same size (A and B) of 4 dimms). Group A dimms may must not be smaller than Group B dimms. (within a memory module).
The server can contain 4 memory modules of 8 dimms ... 128GB is attained by 32 4GB dimms. ( 8GB dimms used to be purchasable but are now discontinued ).
Depending on what you purchased to achieve 32GB on your server then following options are available:
- If you purchased 2 memory modules of 8GB each simply put these in two unused module slots and goto 32GB
- If you purchased 2 memory modules of 16GB each simply put these in two unused module slots and goto 48GB
- If you purchased 4 memory modules of 8GB each using 8 x 1GB dimms then move your existing simms into the group A slots of the new memory modules, goto 40GB and sell the spare dimmms on ebay or put them certain DELL's (then watch the thing crash due to a static dimm destruction issue and possilbe issues as it isn't supported.)
- If you purchased 8 2GB dimms stick them in your existing memory modules
- If you purchased 16 2GB Dimms ... and don have spare empty memory modules sell spares on ebay.
.... There may be further options ....
In general the person you are purchasing from should be giving good advice ... better than mine above.
... My cynical opinion is a lot of partners (and perhaps even Oracle itself) supplying the purchase may be on commission and have no interest and little care in minimising your cost .... having seen the performance of some oracle 'partners' in the uk I can see why some customers might want to move away from oracle hardware.
Please be aware certain games with switching things about could affect your warrantee ... ( its highly embarrassing when a failing disk in a dilbert has the wrong part number or even worse an incorrect backplate affecting the airflow ... ) ... and what you are really paying for is for an engineer to come and sort your server out if there is a hardware issue. So take some of the suggestions above with a pinch of salt.
Please be aware while have I tried to be accurate above I may have made a mistake. ... .... (in fact knowing me I probably have).
Edited by: bigdelboy on 26-Jan-2013 03:51 (NB: adding memory to servers is often a difficult balancing act and may not be cost effective .... and may make smaller dimms redundant in an upgrade in order to maintain supportable/workable configurations). A new T4/T5 may be more cost effective}. Buying fully populated at the beginning is also often more cost effective .... though the largest dimms to achieve highest capacity may be cost prohibitive.

How to find the latest SAP patch release for SRM and BI 7.0?

Hi experts,
I know how to check my sytem patch level in BI 7.0 and SRM. My question is how and where to check the latest patch level on SAP service market place.
Thanks in advance.
Sharat.

Hello,
Goto service.sap.com -> software download -> sap support packages -> Entry by application group -> Sap Frontend components -> SAP GUI for windows
In SAP Frontend components you have patches for BI add-on too.
Assign points if this helps
Regards,
Jorge Diogo

How to find the list of all queries on each and every cube in the system???

Hi All,
I need some method to get all the reports(queries)(technical name and description),run on all the infocubes in the system. The number is very huge...roughly...on each cube there are near about 40-50 reports and the number of cubes is also too high.
Is there any table or function moudle which can make this job easy and less time consuming.
Freinds I need this solution urgetly. Please rush back...
regards,
minal

Hi Minal,
RSZCOMPIC table lists queries built on the cubes.
COMPUID is an ID of the query.
RSZELTDIR table contains description of the reporting elements. DEFTP field equals REP designates queries.
Search for RSZELTDIR-ELTUID = RSZCOMPIC- COMPUID. Field MAPNAME will contain a tech name of the query and TXTLG field its description.
Best regards,
Eugene

How to find the deliveries which does not have Carnot and SHPCON

I have a scenario where for some of the deliveries no CARNOT idoc or SHPCON idocs were not been created or went into error, i have verified it in by going to we05 and found there were many idcos in error and some of the idocs were been set to status 68 and they were manually processed by users. is there any table where i can extract the deliveries which does not have SHPCON idocs created.

hi,
you have to take two steps in this:
first step:
Table EDIDC which contains EDI Control records.
which stores the partner number,partner functions & message types.
2nd step:
take that partners and get deliveries from LIKP table.
regards,
balajia

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the Contract Start date

Hi Friends,
with the help of the Transaction type, Item Category,reference Interest rate, how to find the Contract Start date/Billing Strat date and the Contract number.
Regards,
Raju.

Hi
naj you can find the contract start date and billing date in crmd_order Financial details data tab, start of contract and Billing and the contract no u will find after Approval of Eligibility Norms, then save go to actions create certificate of acceptance the you will get contract number
Reward with Points
Venkat

How to find the quatity of material in backorders

hi
in which table the backorders get saved.
from the v.15 transaction i got the backorders.
i like to know that how to find the quantity of material which is due in the backorders. what are the fields for backorder quantity of material.
regards
kq

Solved in this way
*"*"Local Interface:
*" IMPORTING
*"     VALUE(SUBCLASS) TYPE KLSCHL
*" EXPORTING
*"     VALUE(CLASS) TYPE KLASSE_D
*" TABLES
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
DATA: lv_clint TYPE clint,
        lv_clint1 TYPE clint.
CLEAR: lv_clint,lv_clint1,class.
FREE: return.
SELECT SINGLE clint
                FROM swor
                INTO lv_clint
                WHERE kschl = subclass.
IF lv_clint IS NOT INITIAL.
    SELECT DISTINCT clint FROM kssk
                    INTO lv_clint1
                    WHERE objek = lv_clint.
    ENDSELECT.
    IF lv_clint1 IS NOT INITIAL.
      SELECT SINGLE class
                FROM klah
               INTO class
               WHERE clint = lv_clint1.
    ENDIF.
    ELSE.
      CONCATENATE subclass 'Subclass not found' INTO return-message SEPARATED BY space.
      APPEND return.
      CLEAR return.
ENDIF.
ENDFUNCTION.

How to find the relation between tables

Hi
I am working in Oracle R12
How to find the relationship between these tables INV_MIN_MAX_TEMP,po_requisition_lines_all and Per_all_people_f
These two table i have joined with po_requisition_lines_all and Per_all_people_f To_person_id from PO and Person from hr table but i cant able to join this table with other tables INV_MIN_MAX_TEMP
regards
Srikkanth

Hi;
Please check e-trm site for table relation,integration,explanation etc..
etrm.oracle.com/
Regard
Helios

How to find the quantity of items under WIP job and under PO?

Similar Messages

Maybe you are looking for