How to find the sessions which generated maximum redo amount at instance?

I use below query or Sql*Plus's set autotrace traceonly statistics > redo size statistic to calculate how much redo I generated in my session;
CREATE OR REPLACE VIEW redo_size AS
SELECT value
FROM v$mystat, v$statname
WHERE v$mystat.statistic# = v$statname.statistic#
AND v$statname.name = ‘redo size’;
But how to find the sessions which generated maximum(top 5 for example) redo from the last database startup on 9iR2 or also with new 10gR2 historic views?
We need this information because from the produced archived log files we observe something new producing almost 2 times more redo for a week. I looked at statspack report but couldnt find as I suspected for a massive update or delete.
Best regards,
Tonguc

I tried v$sysstat but I didnt think about v$sesstat Mr.Gasparotto, thank you very much :)
SELECT ss.sid,
sq.sql_text,
se.status,
se.username,
se.osuser,
se.program,
se.machine,
ss.VALUE
FROM v$sesstat ss, v$statname sn, v$session se, v$sqlarea sq
WHERE ss.statistic# = sn.statistic#
AND se.sql_hash_value = sq.hash_value(+)
AND se.sql_address = sq.address(+)
AND ss.sid = se.sid
AND sn.NAME = 'redo size'
ORDER BY ss.VALUE DESC
Best regards.

Similar Messages

  • How to find the job which created the session with errors ?

    Hi,
    I am going to transaction SM35 to see the sessions which has errors. Now if I want to see, what Job was responsible to create that session, how can I see that ?
    Regards,
    Rajesh.

    hi Rajesh,
    Refer to this code to create a session for the erroreneous records
    REPORT  ztest_report
    NO STANDARD PAGE HEADING
                            LINE-SIZE 255
                            MESSAGE-ID ZRASH.
    *                 Internal Table Declarations                          *
    *--Internal Table for Data Uploading.
    DATA : BEGIN OF IT_FFCUST OCCURS 0,
             KUNNR(10),
             BUKRS(4),
             KTOKD(4),
             ANRED(15),
             NAME1(35),
             SORTL(10),
             STRAS(35),
             ORT01(35),
             PSTLZ(10),
             LAND1(3),
             SPRAS(2),
             AKONT(10),
           END OF IT_FFCUST.
    *--Internal Table to Store Error Records.
    DATA : BEGIN OF IT_ERRCUST OCCURS 0,
             KUNNR(10),
             EMSG(255),
           END OF IT_ERRCUST.
    *--Internal Table to Store Successful Records.
    DATA : BEGIN OF IT_SUCCUST OCCURS 0,
             KUNNR(10),
             SMSG(255),
           END OF IT_SUCCUST.
    *--Internal Table for Storing the BDC data.
    DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    *--Internal Table for storing the messages.
    DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    DATA : V_FLAG1(1) VALUE ' ',
    "Flag used for opening session.
           V_TLINES LIKE SY-TABIX,
           "For storing total records processed.
           V_ELINES LIKE SY-TABIX,
           "For storing the no of error records.
           V_SLINES LIKE SY-TABIX.
           "For storing the no of success records.
    *          Selection screen                                            *
    SELECTION-SCREEN BEGIN OF BLOCK B1.
    PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
                 V_SESNAM  LIKE RLGRAP-FILENAME.
    SELECTION-SCREEN END OF BLOCK B1.
    *          Start-of-selection                                          *
    START-OF-SELECTION.
    *-- Form to upload flatfile data into the internal table.
      PERFORM FORM_UPLOADFF.
    *        TOP-OF-PAGE                                                   *
    TOP-OF-PAGE.
      WRITE:/ 'Details of the error and success records for the transaction'
      ULINE.
      SKIP.
    *          End of Selection                                            *
    END-OF-SELECTION.
    *-- Form to Generate a BDC from the Uploaded Internal table
      PERFORM FORM_BDCGENERATE.
    *--To write the totals and the session name.
      PERFORM FORM_WRITEOP.
    *&      Form  form_uploadff
    *     Form to upload flatfile data into the internal table.
    FORM FORM_UPLOADFF .
    *--Variable to change the type of the parameter file name.
      DATA : LV_FILE TYPE STRING.
      LV_FILE = V_FNAME.
    *--Function to upload the flat file to the internal table.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                      =  LV_FILE
    *     FILETYPE                      = 'ASC'
          HAS_FIELD_SEPARATOR           = 'X'
    *     HEADER_LENGTH                 = 0
    *     READ_BY_LINE                  = 'X'
    *     DAT_MODE                      = ' '
    *   IMPORTING
    *     FILELENGTH                    =
    *     HEADER                        =
        TABLES
          DATA_TAB                      = IT_FFCUST
        EXCEPTIONS
          FILE_OPEN_ERROR               = 1
          FILE_READ_ERROR               = 2
          NO_BATCH                      = 3
          GUI_REFUSE_FILETRANSFER       = 4
          INVALID_TYPE                  = 5
          NO_AUTHORITY                  = 6
          UNKNOWN_ERROR                 = 7
          BAD_DATA_FORMAT               = 8
          HEADER_NOT_ALLOWED            = 9
          SEPARATOR_NOT_ALLOWED         = 10
          HEADER_TOO_LONG               = 11
          UNKNOWN_DP_ERROR              = 12
          ACCESS_DENIED                 = 13
          DP_OUT_OF_MEMORY              = 14
          DISK_FULL                     = 15
          DP_TIMEOUT                    = 16
          OTHERS                        = 17
      IF SY-SUBRC = 0.
    *--Deleting the headings from the internal table.
        DELETE IT_FFCUST INDEX 1.
    *--Getting the total number of records uploaded.
        DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
      ENDIF.
    ENDFORM.                    " form_uploadff
    *&      Form  Form_bdcgenerate
    *     Form to Generate a BDC from the Uploaded Internal table
    FORM FORM_BDCGENERATE .
    *--Generating the BDC table for the fields of the internal table.
      LOOP AT IT_FFCUST.
        PERFORM POPULATEBDC USING :
                                    'X' 'SAPMF02D' '0105',
                                    ' ' 'BDC_OKCODE'  '/00' ,
                                    ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                    ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                    ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                    'X' 'SAPMF02D' '0110' ,
                                    ' ' 'BDC_OKCODE'  '/00',
                                    ' ' 'KNA1-ANRED'  IT_FFCUST-ANRED,
                                    ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                    ' ' 'KNA1-SORTL'  IT_FFCUST-SORTL,
                                    ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                    ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                    ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                    ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                    ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                    'X' 'SAPMFO2D' '0120',     
                                    ' ' 'BDC_OKCODE'  '/00',
                                    'X' 'SAPMF02D' '0125',     
                                    ' ' 'BDC_OKCODE'  '/00',
                                    'X' 'SAPMF02D' '0130',     
                                    ' ' 'BDC_OKCODE'  '=ENTR',
                                    'X' 'SAPMF02D' '0340',     
                                    ' ' 'BDC_OKCODE'  '=ENTR',
                                    'X' 'SAPMF02D' '0360',
                                    ' ' 'BDC_OKCODE'  '=ENTR',
                                    'X' 'SAPMF02D' '0210',     
                                    ' ' 'KNB1-AKONT'  IT_FFCUST-AKONT,
                                    ' ' 'BDC_OKCODE'  '/00',
                                    'X' 'SAPMF02D' '0215',
                                    ' ' 'BDC_OKCODE'  '/00',
                                    'X' 'SAPMF02D' '0220',     
                                    ' ' 'BDC_OKCODE'  '/00',
                                    'X' 'SAPMF02D' '0230',     
                                    ' ' 'BDC_OKCODE'  '=UPDA'.
    *--Calling the transaction 'fd01'.
        CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
        MESSAGES INTO IT_CUSTMSG.
        IF SY-SUBRC <> 0.
    *--Populating the error records internal table.
          IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
          APPEND IT_ERRCUST.
          CLEAR IT_ERRCUST.
    *--Opening a session if there is an error record.
          IF V_FLAG1 = ' '.
            PERFORM FORM_OPENSESSION.
            V_FLAG1 = 'X'.
          ENDIF.
    *--Inserting the error records into already open session.
          IF V_FLAG1 = 'X'.
            PERFORM FORM_INSERT.
          ENDIF.
    *--Populating the Success records internal table.
        ELSE.
          IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
          APPEND IT_SUCCUST.
          CLEAR IT_SUCCUST.
        ENDIF.
    *--Displaying the messages.
        IF NOT IT_CUSTMSG[] IS INITIAL.
          PERFORM FORM_FORMATMSG.
        ENDIF.
    *--Clearing the message and bdc tables.
        CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
      ENDLOOP.
    *--Getting the total no of error records.
      DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
    *--Getting the total no of successful records.
      DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
    *--Closing the session only if it is open.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_CLOSESESS.
      ENDIF.
    ENDFORM.                    " Form_bdcgenerate
    *&      Form  populatebdc
    *       FOrm to Populate the BDC table.
    FORM POPULATEBDC  USING    VALUE(P_0178)
                               VALUE(P_0179)
                               VALUE(P_0180).
      IF P_0178 = 'X'.
        IT_CUSTBDC-PROGRAM = P_0179.
        IT_CUSTBDC-DYNPRO = P_0180.
        IT_CUSTBDC-DYNBEGIN = 'X'.
      ELSE.
        IT_CUSTBDC-FNAM = P_0179.
        IT_CUSTBDC-FVAL = P_0180.
      ENDIF.
      APPEND IT_CUSTBDC.
      CLEAR IT_CUSTBDC.
    ENDFORM.                    " populatebdc
    *&      Form  FORM_OPENSESSION
    *       Form to Open a session.
    FORM FORM_OPENSESSION .
    *--Variable to convert the given session name into reqd type.
      DATA : LV_SESNAM(12).
      LV_SESNAM = V_SESNAM.
    *--Opening a session.
      CALL FUNCTION 'BDC_OPEN_GROUP'
       EXPORTING
         CLIENT                    = SY-MANDT
         GROUP                     = LV_SESNAM
         HOLDDATE                  = '20040805'
         KEEP                      = 'X'
         USER                      = SY-UNAME
         PROG                      = SY-CPROG
    *  IMPORTING
    *    QID                       =
       EXCEPTIONS
         CLIENT_INVALID            = 1
         DESTINATION_INVALID       = 2
         GROUP_INVALID             = 3
         GROUP_IS_LOCKED           = 4
         HOLDDATE_INVALID          = 5
         INTERNAL_ERROR            = 6
         QUEUE_ERROR               = 7
         RUNNING                   = 8
         SYSTEM_LOCK_ERROR         = 9
         USER_INVALID              = 10
         OTHERS                    = 11
      IF SY-SUBRC <> 0.
        WRITE :/ 'Session not open'.
      ENDIF.
    ENDFORM.                    " FORM_OPENSESSION
    *&      Form  FORM_INSERT
    *       fORM TO INSERT ERROR RECOED INTO A SESSION.
    FORM FORM_INSERT .
    *--Inserting the record into session.
      CALL FUNCTION 'BDC_INSERT'
        EXPORTING
          TCODE                  = 'FD01'
    *     POST_LOCAL             = NOVBLOCAL
    *     PRINTING               = NOPRINT
    *     SIMUBATCH              = ' '
    *     CTUPARAMS              = ' '
        TABLES
          DYNPROTAB              = IT_CUSTBDC
        EXCEPTIONS
          INTERNAL_ERROR         = 1
          NOT_OPEN               = 2
          QUEUE_ERROR            = 3
          TCODE_INVALID          = 4
          PRINTING_INVALID       = 5
          POSTING_INVALID        = 6
          OTHERS                 = 7
      IF SY-SUBRC <> 0.
        WRITE :/ 'Unable to insert the record'.
      ENDIF.
    ENDFORM.                    " FORM_INSERT
    *&      Form  FORM_CLOSESESS
    *       Form to Close the Open Session.
    FORM FORM_CLOSESESS .
      CALL FUNCTION 'BDC_CLOSE_GROUP'
        EXCEPTIONS
          NOT_OPEN    = 1
          QUEUE_ERROR = 2
          OTHERS      = 3.
      IF SY-SUBRC <> 0.
      ENDIF.
    ENDFORM.                    " FORM_CLOSESESS
    *&      Form  FORM_FORMATMSG
    *       Form to format messages.
    FORM FORM_FORMATMSG .
    *--Var to store the formatted msg.
      DATA : LV_MSG(255).
      CALL FUNCTION 'FORMAT_MESSAGE'
        EXPORTING
          ID        = SY-MSGID
          LANG      = SY-LANGU
          NO        = SY-MSGNO
          V1        = SY-MSGV1
          V2        = SY-MSGV2
          V3        = SY-MSGV3
          V4        = SY-MSGV4
        IMPORTING
          MSG       = LV_MSG
        EXCEPTIONS
          NOT_FOUND = 1
          OTHERS    = 2.
      IF SY-SUBRC = 0.
        WRITE :/ LV_MSG.
      ENDIF.
      ULINE.
    ENDFORM.                    " FORM_FORMATMSG
    *&      Form  form_writeop
    *       To write the totals and the session name.
    FORM FORM_WRITEOP .
      WRITE :/ 'Total Records Uploaded :',V_TLINES,
               / 'No of Error Records :',V_ELINES,
               / 'No of Success Records :',V_SLINES,
               / 'Name of the Session :',V_SESNAM.
      ULINE.
    ENDFORM.                    " form_writeop

  • How to find sql statement which generates LOCK

    Hello,
    In my plsql procedure i have used SELECT FOR UPDATE NO WAIT statement to avoid the current record used by another user.
    Actually i want to find which sqlquery is locking the Object other than my procedure.
    I can find the session id which is locking the object but i can not able to find sql text.
    How to find the SQL text from particular LOCKING Session id as v$sql or v$sqltext or v$sqlarea dont have session id?
    Any help can be appreciated.
    Thanks in advance.

    It's not necessarily that easy to find the statement that was responsible for the lock.
    It depends.
    First of all, it depends on version.
    If you're >= 10g and you're lucky and you're licensed for Diagnostic Pack, you might find it in ASH.
    If the statement that's responsible for the lock is also waiting on something else or runs for long enough, then ASH will almost certainly have it.
    Doug Burns has a 10-part series on the subject.
    http://oracledoug.com/serendipity/index.php?/archives/1477-Diagnosing-Locking-Problems-using-ASH-Part-1.html

  • How to find the code which processes idocs

    I am looking for a descriptive short document which would ideally give me comlete picture in IDOC processing, transactions used etc.
    E.g
    My XI sends idocs to an RFC port of an ERP system. All I know is message type FIDCC2(found it in message mapping and under a partner profile ias imput parameter in transaction we20 for a partner profile with rfc destination of its own rfc destination i.e. PR1CLNT001)
    . However in this example I do not find source code which process then this idoc(probably as it is original idoc)?
    How to find the code

    Jan
    You can check the documentation and source code of two reports
    RBDAPP01 & RESOUT00   ( https://service.sap.com/sap/support/notes/1333417)
    https://service.sap.com/sap/support/notes/527481
    Few more IDoc related tcode, we05,bd87 etc...
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d?overridelayout=true
    Edited by: Anindya Bose on Aug 6, 2009 7:34 PM

  • How to find the sessions connected to oracle through application server?

    Hi all,
    i want to restrict my application server users from the deletion of the data in my database.
    for this i was try to find out the application name from v$session but it is showing some application names and some blanks. i need to find out the application server name, so that i can restrict the users in product user profile.
    is there any view to find the sessions and applications which are connected to oracle database?
    Thanks,
    Sandeep

    hi pavan,
    Even whne the privileges are revoked, the java application(users) can able to delete data in the database schema through the java application.
    please suggest me on this?
    --sandeep                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to find the tables which are the candidates for gathering stats in 10g

    Hi,
    In 10g how can we find the tables, partitions which are the candidates for gathering the stats.
    I want to findo those tables, partitions and gather the stats on daily basis.
    Thanks,
    Mahi

    The probem you describe has been posted about before. There are known issues with the default dbms_stats parameter settings for some environements.
    What you can do is just go ahead an manually submit dbms_stats commands with appropriate parameters for tables that have not been analyzed or modify the maintenance window to give it more time.
    I would rather just generate the missing statistics myself then the job can continue to run in the normal maintenance window. Since the job should be looking only for tables that meet the stale requirements then once everything is analyzed it is likely the job can keep the statistics updated in the default time allowed.
    Be warned that the default parameter settings do not work well for some tables in some environments and if that proves true for your shop you can generate workable statistics on a table and then lock them so the nightly job ships regenerating the statistics for that table. You would then manually unlock, generate, and lock that statistics for that table as necessary.
    HTH -- Mark D Powell --

  • How to find the query that generates print preview?

    Hello,
    How can I find the query that gets executed to generate  print preview? On SAP Business One client if I open a Sales Quotation and click on print preview a report is generated. What queries are run in the background to generate this report?
    Thanks for your help.
    Regards,
    Sheetal

    Hi Sheetal,
    In such cases i am using a Profiler which is connected to my company's database. If you are using SQL-Server, the start the "Profiler", connect it to your database server and start the trace. When the trace is running, execute the SBO action. After you executed this action you will see in the profiler the excuted SQL-Statements.
    Regards,
    Christian

  • How to find the session info using the Unix PID

    Hi Guys
    We found in alert log that Some process with Unix pid 3416182 makes some transaction fail. It happened on weekend and now when we try to find it in v$process we did not find any info. Is there any place where oracle stores the PID History where in i would be able to find which process,session,user caused the transaction failure.
    Kindly help me. I m using oracle 10G R2.
    Thanks in advance
    Ram
    Edited by: user448837 on Jun 29, 2009 2:04 AM

    We found the transaction failure because of an online rebuild.This rebuild is with a PID which none of the DBA's ran.From trace we can just see the unix PID.With this we need to find the user who ran this rebuild

  • How to find the LoginNames which are only having the special chars %, @, .

    I have a table called LoginTable in that I have a column called LoginName
    I want to select only the LoginNames which are having the special charecters like %, @ and . how to write the query
    Please help me out.
    it is some thing like select LoginName from LoginTable where LoginName like (%, @, .) please correct my query

    Please use regexp_like, if your database is Oracle10g 10.1 or higher.
    Otherwise...
    how to search for '%' in data
    select * from LoginTable
    where
    LoginName like '%\%%' escape '\'
    or
    LoginName like '%@%'
    or
    LoginName like '%.%'
    ;

  • How to find the deliveries which does not have Carnot and SHPCON

    I have a scenario where for some of the deliveries no CARNOT idoc or SHPCON idocs were not been created or went into error, i have verified it in by going to we05 and found there were many idcos in error and some of the idocs were been set to status 68 and they were manually processed by users.  is there any table where i can extract the deliveries which does not have SHPCON idocs created.

    hi,
    you have to take two steps in this:
    first step:
    Table EDIDC which contains EDI Control records.
    which stores the partner number,partner functions & message types.
    2nd step:
    take that partners and get deliveries from LIKP table.
    regards,
    balajia

  • Urgent-How to find the tables which are used in  DB02 transaction

    Hi,
    Can anybody help me in finding the tables  in Tablespaces tabstrip & Tables n Indexes tabstrip  in DB02 transaction??

    Hi,
    open the following link.
    http://books.google.co.in/books?id=jTTrZjucb_QC&pg=PA37&lpg=PA37&dq=dbo2%2Bsap&source=web&ots=FgA9pC3u24&sig=sOG3EJRm5HGW2aFpkVVH_oxBjjo&hl=en#PPP1,M1
    Master data load failure
    Reward if Helpful
    Jagadish

  • How to find the right info on maximum ram expansion

    I have a MacBook Pro model 3,1 identified by the support pages also as MacBook Pro 15" /2.2/2.4 GHz. I would like to increase its system memory capacity maximally (presently 2 Gb). On the page MacBook Pro (Late 2006) - Technical Specifications which I found by entering the serial number (W87445ASX91) it says that max capacity is 3 Gb. On the other hand, on the page MacBook Pro: How to remove or install memory - Apple Support it says that maximum capacity for "MacBook Pro (15-inch 2.4/2.2 GHz)" is 4 Gb. Which one is correct? How can I find out?
    Regards
    Dan

    Hello danbae and welcome to Apple Support Communities,
    When I run your serial number here:
    http://www.chipmunk.nl/cgi-fast/applemodel.cgi
    I get:
    "Nice Name: MacBook Pro 15 inch Core 2 Duo SR (Mid/Late 2007)
    Machine Model: MacBookPro3,1
    Please visit our facebook page
    Name: MacBook Pro (Mid 2007)
    ModelCode: mbp_mid_07
    Family name: A1226
    Model Number: MA895
    Group1: MacBook
    Group2: Pro
    Generation: 31
    CPU speed: 2.2GHz
    Screen size: 15 inch
    Screen resolution: 1440x900 pixels
    Colour: Aluminium
    Return Key: Please tell us what model keyboard this model has. Do you have a US style HORIZONTAL, or ISO style VERTICAL return key on the keyboard?
    Production year: 2007
    Production week: 44 (November)
    Production number: 6146 (within this week)
    Model introduced: 2007
    Capacity: 120GB
    Memory - flavour: DDR2-S-667
    Memory - number of slots: 2
    Memory - maximum total: 6GB
    Memory - largest module: 4GB
    Factory: W8 (Shanghai China)"
    And
    Low End Mac says:
    "RAM: 2 GB, expandable to 6 GB using PC2-5300 DDR2 RAM"
    But call OWC:
    https://www.macsales.com/
    They are very dependable and always stand behind what they sell you.

  • HT1766 how to find the icon which can be moved around the screen with "siri, favorites,home device"?

    I'd like tohave the moving icon which contains siri,favorites,home and ddevice, you can move it around on the ipad screen. It's a small round one,but becomes square when it is bigger. so where to find it and how to install it?

    Try Settings>General>Accessibility>Assistive Touch
    ~Lyssa

  • How to find the sessions/user consuming more temp tablespace

    Environment details
    IBM-AIX 64 bit
    Oracle 10.2.0.4.0
    Recently we encountered the issue of sudden peak in CPU utilization and temp tablespace usage. We are noticing this issue after Apr CPU 2009 patch and upgrade to 10.2.0.4.
    Recently temp space was full and we added 18 GB of space to temp tablespace, within few hours, they are also consumed.
    Application team is telling that they did not modify any code. ADDM report suggests most of the recommendations related to SQL tuning only
    not sure about the real issue. Can somebody tell me how I can find what are all sessions/user consuming high temp tablespace
    Edited by: user1368801 on Sep 1, 2009 5:32 PM

    Hi,
    Run below query to check if it is used by any session.
    select sum(a.BYTES_USED)/1024/1024 used_mb, sum(b.bytes)/1024/1024 total_mb,
    sum(a.BYTES_USED)/sum(b.bytes)*100 pct_used
    from V$TEMP_EXTENT_POOL a, v$tempfile b
    where a.file_id(+) = b.file#
    Check who is using it by the below query.
    SELECT s.sid,s.serial#,osuser,process,program,s.sql_hash_value,u.extents, u.blocks
    FROM v\$session s, v\$sort_usage u
    WHERE s.saddr = u.session_addr order by extents,blocks desc
    Hope this solves your issue.
    Regards
    Regards,
    Satishbabu Gunukula
    Click here to improve RMAN backup Performance using [Block change tracking in Oracle 10g|http://oracleracexpert.blogspot.com/2009/09/block-change-tracking-in-oracle-10g.html]
    http://oracleracexpert.blogspot.com

  • How to find the systems which are connected in network like LAN

    hello friends......
    In my project i have to give the ipaddress as the input in one system and i have to find whether that corresponding system having that ipaddress is connected in LAN or not..........simply telling that is a simple ping program having only code written on the server side and not on the client side..........
    anybody can help me plz..............

    Hi,
    open the following link.
    http://books.google.co.in/books?id=jTTrZjucb_QC&pg=PA37&lpg=PA37&dq=dbo2%2Bsap&source=web&ots=FgA9pC3u24&sig=sOG3EJRm5HGW2aFpkVVH_oxBjjo&hl=en#PPP1,M1
    Master data load failure
    Reward if Helpful
    Jagadish

Maybe you are looking for

  • WSDL URL is invalid or the WSDL file is not valid or incorrect

    Hi All, I am using Oracle Soa Suite 11g. I have got Oracle database, Oracle weblogic admin server, Oracle SOA server all installed on my laptop. I have deployed a sample BPEL process. When I am trying to test the process it is giving an error "Either

  • How to force a re-calculation of a formula (pricing)?

    Hello gurus, I'm facing a big problem regarding the use of custom conditions for SAP pricing. We have created a new pricing condition (ZFR1) and binded it to a custom formula, this condition is a percentual, it updates de field KBETR. Everything work

  • Apple's power adapter replacement program - U.S. only

    Hello, I have a macbook air. Its power adapter has a L-shape, but I have the same problem because of strain relief. I found that Apple's power adapter replacement program page on web, About Apple's Power Adapter Replacement Program -- U.S. only. I th

  • How do I change my name?

    I have no idea if this topic even belongs here.  Anyway... In 2005 when I first got iTunes I needed to register and since I wasnt 18 and I had to use a credit card I put my moms information in.  Now 7 years later it still says my Mom's name on the ac

  • Lesson 1  Video Using Timer.. about 6:17 into the Video

    So far I have completed all of the videos and exercises so far so good. But the very last example using the counter (implements CountListener). So I removed all the previous code and deletes the associated Java files from the previous exerces and had