How to find the top ten reports consuming the high response times in st03n?

HI Basis Gurus,
Please could anybody tell me "How can one find the top ten high response time consuming reports in st03n transaction or in is there any other way to find out this.Please help me its urgent....
Advance thanks....

hi Meghadoot,
below is an example for your request.
ST03N
Expert mode
Server name - Day- double clicdk Today
In analysis view - Ranking lists-double click Top Response time
Regards

Similar Messages

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to find the Date and Time of Modification of Column in aTable?

Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar M

I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

How to obtain the Query Response Time of a query?

Given the Average Length of Row of tables and the number of rows in each table,
is there a way we get the query response time of a query involving
those tables. Query includes joins as well.
For example, suppose there 3 tables t1, t2, t3. I wish to obtain the
time it takes for the following query:
Query
SELECT t1.col1, t2.col2
FROM t1, t2, t3
WHERE t1.col1 = t2.col2
AND t1.col2 IN ('a', 'c', 'd')
AND t2.col1 = t3.col2
AND t2.col1 = t1.col1 (+)
ORDER BY t1.col1
Given are:
Average Row Length of t1 = 200 bytes
Average Row Length of t2 = 100 bytes
Average Row Length of t3 = 500 bytes
No of rows in t1 = 100
No of rows in t2 = 1000
No of rows in t3 = 500
What is required is the 'query response time' for the said query.

I do not know how to do it myself. But if you are running Oracle 10g, I believe that there is a new tool called: SQL Tuning Advisor which might be able to help.
Here are some links I found doing a google search, and it looks like it might meet your needs and even give you more information on how to improve your code.
http://www.databasejournal.com/features/oracle/article.php/3492521
http://www.databasejournal.com/features/oracle/article.php/3387011
http://www.oracle.com/technology/obe/obe10gdb/manage/perflab/perflab.htm
http://www.oracle.com/technology/pub/articles/10gdba/week18_10gdba.html
http://www.oracle-base.com/articles/10g/AutomaticSQLTuning10g.php
Have fun reading:
You can get help from teachers, but you are going to have to learn a lot by yourself, sitting alone in a room ....Dr. Seuss
Regards
Tim

Need to know how to find the last execution time for a function module

HI all
I need to know
1) How to find out the last execution time of the function module ?
say for eg. I have executed a func. module at 1:39pm. How to retrieve this time (1:39pm)
2) I have created 3 billing document in tcode VF01 i.e 3 billing doucment no. would be created in SAP TABLE "VBRP" b/w 12am to 12:30 am.
How to capture the latest SAP database update b/w time intervals?
3) Suppose I am downloading TXT file using "GUI_DOWNLOAD" and say in 20th record some error has happened. I can capture the error using the exception.
Is it possible to run the program once again from 21st records ? All this will be running in background...
Kindly clarify....
Points will be rewarded
Thanks in advance

1.Use tcode STAT input as Tcode of Fm and execute .
2. See the billing documents are created in table VBRk header and there will always be Creation date and time.
VBRk-Erdat "date ., u can check the time field also
So now if u talk the date and time we can filter then display the records in intervals.
3. with an error exeption how is my txt download finished .
once exception is raised there will not be a download .
regards,
vijay

How to find the Date and time of Installation of Oracle in Windows?

Hi ,
Is there any way to find the installation Date and time of Oracle in Windows?
Regards
Rajesh

If you have never recreated/restored/reincarnated the database, then CREATED column from v$database should tell you when you created the database.
If you are looking for the date/time of installation of Oracle home, check the logs under OraInventory.
Reply by Satish sir at following link:
installation date/time of a database !!
Hth
Girish Sharma

How to find the date and time difference in InfoPath 2013?

Hi All,
My date and time format is like: 2013-12-24T10:47:38 and have three fields Start date, End date and Actual time taken.
If start date and end date filled then actual time taken field should automatically should fill, for example 2 days 12 hours 48 min 3 sec.
How to achieve this?

Hi Sam,
I believe we had discussed the same issue in the below thread. Can you please refer the below one?
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d93e16ff-c123-4b36-b60b-60ccd34f6ca7/calculate-time-differences-in-infopath?forum=sharepointcustomizationprevious
If it's not helping you please let us know
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

How to find the Names of Most costly Views or Most Time consuming views

Hi All,
I had a database consisting of almost 200 views,as a part of Optimization process i want to find out the most costlier views.How to do that.Actually i want the names of the VIEWS,so that i can optimize that.Can any one help me out?
I had one more doubt in our Database a view is created like view A( which is created by joining several tables).so do i need to add index on this view separately or does it take the index of the tables which i joined? And in our Database i had created
a VIEW which is derived from other views(the Joining objects are views not tables),so while i select recoreds from this views which is derived from other views it is taking a lot of time.Is tehre any problem with that?

Please avoid such double post spread over several forums:
http://social.msdn.microsoft.com/Forums/en-US/bae4042a-10b8-4d12-aa46-88a05ea37a76/how-to-find-the-names-of-most-costly-views-or-most-time-consuming-views?forum=sqldataaccess
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to find the contents of proc from top command

I had a doubt related to how to find the contents of a procedure or the statements from the PID displayed in top command if it can be done from TOAD or
sqlplus. If we can find out the details from top like:-
21211 oracle 16 0 3228 1012 764 R 0 0.0 0:07.68 top
1 root 16 0 1732 552 472 S 0 0.0 0:01.29 init
say, what is the process with PID 21211 and 1 are doing?
I hope, my question is clear.
Please, help in solving the doubt.
regards

Join v$process, v$session, and v$sql
SQL> ed
Zapisano file afiedt.buf
1 SELECT p.pid, s.sid, s.serial#, sq.sql_text
2    FROM v$session s,
3      v$process p,
4      v$sql sq
5    WHERE s.paddr = p.addr
6*   AND sq.address = s.sql_address
SQL> /
       PID        SID    SERIAL# SQL_TEXT
        37        128          2 BEGIN EMD_NOTIFICATION.QUEUE_READY(:1, :
                                 2, :3); END;
        19        149       4566 SELECT p.pid, s.sid, s.serial#, sq.sql_t
                                 ext   FROM v$session s,     v$process p,
                                      v$sql sq   WHERE s.paddr = p.addr
                                  AND sq.address = s.sql_address
SQL>Edited by: Łukasz Mastalerz on Feb 12, 2009 1:27 PM

How to find the search help for the parameters stmt in a report

hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful.

Urgentpls : How to find the Oracle reports and forms version in Unix prompt

Hi,
How to find the Oracle reports and forms version in Unix prompt.
Please give the steps
Thanks

I need to check the version of Oracle forms and reportsExample :$ frmcmp.sh -h | head -1
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
$ rwrun.sh 2>/dev/null | head -2 | tail -1
Report Builder: Release 10.1.2.0.2 - Production on Wed Mar 10 11:17:55 2010
$

How to find the hidden objects in Webi Rich client report 4.0 sp 04 ?

Hi,
How to find the hidden objects in Webi Rich client report at BI 4.0 sp 04 ?
Best Regards,
ASR

Hi Sai,
Go to Report Element Tab-->There you have a Tab Cell Behaviors.
When you flip between 'With Data' and 'Structure Only' under 'Design' Tab,you can see the some cells will be hide/Un hide behavior,if hiding of cells applied.
Select that cell and then Under 'Cell Behaviors'-->'Hide' Tab-->and choose Show Option.
Regards,
Venkat P

How to find the Last report run date

Hello All,
I have one ALV report.
In that report i have to display the date on which the report was run last time.
The user can run report both in backgroud as well as in forground.
Cay anybody plz tell me how to find the date on which report was run last time.
Thanks and Regards
Sachin Yadav

Hello Sachin,
I agree with Thomas on this. That would be the simplest & fool-proof solutn. Alternatively, you can try to use the stmts: EXPORT/IMPORT TO DATABASE.
Search in SDN you will find [similar posts|Get IP Address and Report Running Date and time;.
BR,
Suhas
Edited by: Suhas Saha on May 18, 2009 3:44 PM

How to find the reports/Txs that are affected by changes made in NA30

Hi All,
Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
Many thanks & Regards,
Vijaya

No idea about any such report but from SAP help got following list of billing reports. It might be helpful
RNAABGR0 IS-H: Revenue Accrual
RNAABRKZ IS-H: Change Billing Indicator of a Case
RNABD000 IS-H: Patient Billing
RNABILB0   IS-H: Change Billing Block via Conditions
RNABILB1   IS-H: Change Billing Block via Conditions (Outpatient Cases)
RNADIN03   IS-H: Billing Document Mass Print Program
RNAFSPER IS-H: Change Billing Block
RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
RNASED00 IS-H: Delete Case Selections
RNASEK00 IS-H: Copy Case Selection
RNASELM0 IS-H: Billing - Process Messages
RNASEL00 IS-H: Case Selection
RNASEL01 IS-H: Case Selection via Outpatient Visits
RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
RNASTO04 IS-H: Cancel Provisional Invoice
RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
RNAENT00 IS-H: Billing Status of Inpatient Cases
RNA_CASCADE_BILLING IS-H: Cascade Bill Processing

How to find the top ten reports consuming the high response times in st03n?

Similar Messages

Maybe you are looking for