How to find which are the user exits that updating z table.

There was a question posted by someone else which said:
I have a z table. my requirement is to find the user exits that update the value to this table?
but my requirement is to get only those user exits that update my z table.
Before that question was rejected, it got 5 replies which made me think that this tip is worth sharing.
So the steps are:
Do a where-used list search from SE11
Click on Search Range button at bottom
Type UPDATE (you can also add Insert, Delete etc to select-option) to ABAP Key Words field
Say No to the popup that asks whether to include Fields of the Table
Result will show relevant programs with code snippets doing static Update on that custom table.

EWK1 would be too performance heavy in this case. It scans the source code to get the result.
You can however, download the list of programs given in where-used list, and give that as limiting condition in EWK1 or some other code scanning utility.
Using my method, where-used list of table is taken from database tables, and then code scanning is done only on the that list, not on entire Z* programs.
Try it yourself to notice the speed difference.

Similar Messages

How to findout Which are the User Exist had been activated for T.Code

Hi Everybody,
-->I want to know, what are the user exits have been activated or used for a particular t.code.
--> I will give a small example it will be give clear idea on my question.
-->For my client, they used lot of user exist and screen exist in the sales order screen,how to find out them. Is their any easy way to find out which are user exist had been acitviated for a particular template.
Regards,
Madhan

If you mean how to see a user list with the T-Code they are using.
Then you can just use T-Code SM04.
It will give all the information about those user.
Or If you mean User Exists.
then please use this link
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Thanks,
Sugauli
Edited by: Sugauli on Dec 11, 2008 9:20 PM

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

What are the user exits available related to Credit Management?

What are the user exits available related to Credit Management?
<b>I have blocked users from releasing SO through Tciode VKM3 , now I want to block
the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.</b>
Thanx in advance,
Regrds,
Binayak

Hi,
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Risk Management for Receivables
RVKMPUS2
Using this user exit, you can define new forms of payment guarantee.
Regards,
Amrish Purohit

How can i do a variable User exit that present the values before execute

Hi Gurus,
How can i do a variable User exit that present the values before execute, i need this:
a variable that calculate SYS-DATUM until 30 days before (I got the code) but this variable run automatic because is user exit, i want this variable but first present the values, not execute automatic, this is because the users want the report that automatic present the values , help

Hi,
Refer the below links,
http://documentation.softwareag.com/natural/nat424mf/pdf/ops_mf/conf_usrex.pdf
http://www.erpgenie.com/component/content/article/1097
http://www.apentia-online.at/UP/Apentia/files/Article/SAP_BW_User_Exits_and_BAdIs.pdf
Hope it helps you,
Regards,
Ravindra.

What are the User Exit Available after saving a Billing Documents

Hi,
What are the User Exit Available after saving a Billing Documents
Regrds,
Binayak

Hi
Check the following Exits for VF01 Tcode
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
Business Add-in
SD_CIN_LV60AU02                         BADI for billing
VOR_WA_FAKTURA                          Billing before Goods Issue
Reward points if useful
Regards
Anji

How to determine which cell the user has just left?

I want to check the contents of a JTable cell just after the user has left that cell.
What is the most reliable way to determine which cell the user has just left?

Hi,
I use the cellRenderer for that... if the value is not correct, I call an editCellAt() method...
JRG

Which are the initialization parameters that can be replaced by Environmet ariables

If I am connecting to SQL Plus from a command window(cmd), which are the variables that I can set in Environment, so that it overrides the values set in init.ora file.
For eg I can SET the following environment variables using a batch file
SET NLS_DATE_FORMAT=RRRR-MM-DD
SET NLS_LANGUAGE=US.AMERICAN.ISO***
Now when a new SQL session starts this values are set in the new session.
Can I know which other Oracle initialization parameters can be set in a batch file.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/nav/initora.htm

Which are the initialization parameters that can be modified by Environmet variables

If I am connecting to SQL Plus from a command window(cmd), which are the variables that I can set in Environment, so that it overrides the values set in init.ora file.
For eg I can SET the following environment variables using a batch file
SET NLS_DATE_FORMAT=RRRR-MM-DD
Now when a new SQL session starts this values are set in the new session.
Can I know which other Oracle initialization parameters can be set in a batch file.

http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/nav/initora.htm

What are the user-exits which will trigger on saving Sales Order

Hello Experts!!!
I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002 Predefine sold-to party in sales document ). So it is working fine.
Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
Thanks a lot on advance.

Hi
U can't find it there,because it's a include, not enanchement.
So u need to use the trx SE38, not CMOD.
For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
U need to get the access key by OSS in order to change them.
These are the rest of the includes where u can find other exits:
       INCLUDE MV45ATZZ.            " Data definitions in MV45ATOP
         INCLUDE MV45AOZZ.             " User-modules PBO
         INCLUDE MV45AIZZ.             " User-modules PAI
         INCLUDE MV45AFZA.             " User-forms < 3.0
         INCLUDE MV45AFZB.             " User-forms
         INCLUDE MV45AFZC.             " User-forms < 3.0D
         INCLUDE MV45AFZD.             " User-forms   3.0E
         INCLUDE MV45AFZF.             " User-forms   3.0F
       include mv45afzg.             " User-forms   3.1G
         INCLUDE MV45AFZH.             " User-forms   4.6B
         INCLUDE MV45AFZZ.             " User-forms
         INCLUDE MV45AFZ4.             " User-forms   4.0
Anyway u can find some information about these exit in customizing (trx SPRO):
Sales and Distributions->System modifications->User exits
Max

How to find what are the support-teams map with particular componant type

hi experts,
i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
Regards,
Kumar..

Hi Kumaresan-
I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
Click on the Responsibilities Tab
Create your responsibility based on your support team requirements
Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
Highlight a responsibility and click Change
In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

How can find what are the customers are created in my earlier version.

Hi all,I am trying to find out how can I check the what are the customers are created in my earlier version of sap (i.e 4.7B)
My client Upgrade d the 5.0 in 2007. Now my client asking, list of WDs which are created in the 4.7B.

Hi,
You know when the SAP went live with the new version.
In t.code SE16, enter table name KNA1.
In the field created on put value of new SAP version go-live date and select a < symbol by double clicking the field. Then click on execute button, the system will provide the customer master created before the new version go-live date.
Regards,

How to find what are the columns actually used in BMM

Hi All,
Is there any way(Utility) in RPD to find out whether the columns present in physical layer are used in BMM layer? One option is to Rt click on physical layer tables and do 'Query related logical column'. This will not allow me to export the result into CSV or any file.
Is there any beeter way?
Thanks,
Anilesh

Anilesh,
Try with BI Administrator - Tools -- > Utilities --> Repository Documentation --> execute give your file name (rep_doc.csv)
Thanks -

How to find what are the select statements fired on a particular schema

Hi Guys,
I have a development box schema whose username and the password is shared across many users who are doing the developement.
I wnat to know what are the select statement fired on it during a particular time interval.
Thanks,
Prafulla

with dba user
BEGIN
DBMS_FGA.ADD_POLICY(object_schema => 'schemaname',
object_name => 'CALLS',
policy_name => 'CALLS_AUDIT',
statement_types => 'SELECT'
…enable => TRUE);
END;
then all select are viewed on table dba_fga_audit_trail
Edited by: Adigozalov Gurban on Dec 3, 2010 11:05 AM

How to find Manager of the USER from org Structure

Hello Experts,
I have got the FM RH_STRUC_GET and SWX_GET_MANAGER to find the manager. I am unable to use this FM, Can you please let me know which FM can be used to find the manager.
If RH_STRUC_GET is being used to find the manager what will be WEGID for this?
Please help.

Hi,
Then Why don't you try with WEGID US_CHEF
I think You can just create a entry from the transaction as MANAGER with the below evaluations paths
*     B     008     Holder     *     S
S     A     003     Belongs to     *     O
O     B     012     Is managed by...     *     S
US     A     208     Is identical to     *     P
Regards
Pavan
Edited by: Pavan Bhamidipati on May 30, 2011 2:28 PM

How to find which are the user exits that updating z table.

Similar Messages

Maybe you are looking for