Multiple series on anychart line graph?

I want to set up an anychart line graph from a query which returns a result set something like:
PART DATE QTY
abc 01/01 10
abc 02/01 20
abc 03/01 10
cde 05/01 10
cde 06/01 20
So, in the above I want a series for part abc and part cde. I know I can add another series but that has two problems:
1) The number of distict parts can vary - there might be 2, or might be 20 depending on the parameters used.
2) Adding a new series means duplicating pretty much the same query manu times (with a restriction on part number) - this is very inefficient!
Is it possible to add multiple series "programatically"?

Ah, I never saw the number 10 anywhere.
You don't need to process the NaN with mathscript. It is sufficient to add the NaN to the data going to the graph terminal. Even if mathscript gets an NaN, you can probably test how it is handled.
What does the mathscript node actually do? If it is just doing some scaling, it probably will not matter, but if it would do e.g. a linear regression, it would probably give unexpected results.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

Line Graph with Multiple Series not displayed(Install Missing Plugins)

Hi All,
I have created a Graph - Line Graph.
I have created more then one Series.
The graph is not being displayed, it asks to download missing plugins.
Where as when I have a singe chart series the graph is displayed.
What are the missing plugins, where can I find those.
I am using Mozilla 5.0.
Regards
Arif Khadas

Please Help!

Creating multiple Line Graph having common values..

Hi...
I've created one application process for creating Multiple Line Graph.
And i've integreted two tables in this graph, where values may be common for both the tables. In this case, for common values, instead of getting overlapped I'm getting scattered graph(its totally abnormal). Please help me if you 've any idea about this issue.....?
Please go through the App Process and the output of the SQL query.
In output of the query, in the NAME column "Feb-2010" is common.
This is the SQL query OUTPUT:_
TABLE 1
NAME VALUE
Sept-2009 100
Oct-2009 95
Nov-2009 98
Feb-2010 97
TABLE 2
NAME VALUE
Jan-2010 93
Feb-2010 100
Mar-2010 98
Application Process :_
DECLARE
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
OWA_UTIL.http_header_close;
HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
HTP.p ('<anychart>');
HTP.p ('<settings>');
HTP.p ('<animation enabled="True"/>');
HTP.p ('</settings>');
HTP.p ('<charts>');
HTP.p ('<chart plot_type="CategorizedVertical">');
HTP.p ('<data_plot_settings default_series_type="Line">');
HTP.p ('<line_series>');
HTP.p ('<marker_settings>');
HTP.p ('<marker type="None" />');
HTP.p ('<states>');
HTP.p ('<hover>');
HTP.p ('<marker type="Diamond" />');
HTP.p ('</hover>');
HTP.p ('</states>');
HTP.p ('</marker_settings>');
HTP.p ('<tooltip_settings enabled="True">');
HTP.p ('<format>Year {%Name}{enabled:false} {%SeriesName} - {%Value}{numDecimals:0}%</format>');
HTP.p ('</tooltip_settings>');
HTP.p ('<effects enabled="True">');
HTP.p ('<drop_shadow enabled="False" />');
HTP.p ('<bevel enabled="true" distance="1" blur_x="2" blur_y="2" />');
HTP.p ('</effects>');
HTP.p ('<line_style>');
HTP.p ('<line thickness="3" /> ');
HTP.p ('</line_style>');
HTP.p ('</line_series>');
HTP.p ('</data_plot_settings>');
HTP.p ('<chart_settings>');
HTP.p ('<title enabled="true">');
HTP.p ('<text>Avg. %App. Uptime per month </text>');
HTP.p ('</title>');
HTP.p ('<axes>');
HTP.p ('<y_axis>');
HTP.p ('<title>');
HTP.p ('<text>Value</text> ');
HTP.p ('</title>');
HTP.p ('<scale minimum="90" maximum="101" major_interval="1" />');
HTP.p ('<labels>');
HTP.p ('<format>${%Value}{numDecimals:0}</format>');
HTP.p ('</labels>');
HTP.p ('<axis_markers>');
HTP.p ('</axis_markers>');
HTP.p ('</y_axis>');
HTP.p ('<x_axis tickmarks_placement="Center">');
HTP.p ('<title enabled="False" /> ');
HTP.p ('</x_axis>');
HTP.p (' </axes>');
HTP.p ('</chart_settings>');
HTP.p ('<data>');
FOR ObjRecord IN (select DISTINCT(K_OBJECT.OBJECT_ID) as OBJECT_ID,name from K_OBJECT, K_OBJ_TYPE_ASP_REL where K_OBJECT.OBJECT_ID=K_OBJ_TYPE_ASP_REL.OBJECT_ID and K_OBJ_TYPE_ASP_REL.OBJECT_TYPE_ID=1)
LOOP
HTP.p ('<series name="'|| ObjRecord.name ||'">');
FOR MonthlyValueRecord IN (select NAME,VALUE
from K_REPORT_RUN,K_ASPECT_VALUES,K_ASP_TIM_RPT_REL
where K_REPORT_RUN.RUN_ID=K_ASP_TIM_RPT_REL.RUN_ID
and
K_ASPECT_VALUES.ASPECT_VALUE_ID=K_ASP_TIM_RPT_REL.ASPECT_VALUE_ID
and
K_ASP_TIM_RPT_REL.ASPECT_ID=1
and
K_ASP_TIM_RPT_REL.OBJECT_ID=ObjRecord.OBJECT_ID
order by K_REPORT_RUN.STARTTIME)
LOOP
HTP.p ('<point name="'|| MonthlyValueRecord.name ||'" y="'|| MonthlyValueRecord.value ||'" />');
END LOOP;
HTP.p ('</series>');
END LOOP;
HTP.p ('</data>');
HTP.p ('</chart>');
HTP.p ('</charts>');
HTP.p ('</anychart>');
htmldb_application.g_unrecoverable_error := true;
END;
Edited by: user12873839 on Apr 9, 2010 3:58 AM
Edited by: user12873839 on Apr 9, 2010 4:02 AM
Edited by: user12873839 on Apr 9, 2010 8:00 AM

>
Help Needed Urgent.....
>
That is one surefire way to not get any help and certainly not urgently. I suggest that you amend the title of your post to something that reflects the actual issue. This will also help anyone with similar issues to find the thread.
When posting code please put {noformat}{noformat} (with the curly brackets and the word code in lower case) above and below it to preserve formatting like this...
{noformat}{noformat}
SELECT *
FROM emp
{noformat}{noformat}
This will be displayed on the forum like this...SELECT *
FROM emp
Cheers
Ben

The ability to customize line attributes in a line graph (3 series)

Hello all,
I have a line graph page that plots three lines (series 1, series 2, series 3).
line 1 - upper boundary of a confidence interval
line 2 - actual estimate
line 3 - lower boundary of a confidence interval
Visualize three lines running along the axis. If the estimate line dips above the upper line or below the lower line, then that would indicate a problem for us to investigate.
It looks pretty but the end user wants the upper and lower boundaries to be 'dotted' lines instead of solid to help differentiate it from the estimate. Currently, I don't have any control over the line attributes using the built in wizard. Anybody know how I could customize the display so that lines 1 and 3 would be dotted while leaving line 2 as a solid line?
Thanks for any help.
James

James -
You are going to need to use Custom XML for this task
This link outlines (among other things) how create a process to create XML to replace the #DATA# in the Custom XML: Re: Chart with 2 Y Axis
In addition to this, the following link is useful in seeing how the page process can work: http://apex.oracle.com/pls/apex/f?p=36648:30:4466603909194692:::::&tz=-8:00
Next, you will need to create a new line style in your Custom XML (not the #DATA# tag portion, but the Custom XML of the chart) Here are a couple of references that may help: http://www.anychart.com/products/anychart/docs/xmlReference/index.html and http://www.anychart.com/products/anychart/docs/users-guide/index.html
Once you have defined a style in your custom XML, then your page process will need to make decisions about what style to use and apply the correct style to the appropriate lines.
I know this process is quite confusing at the beginning, however, with a little practice, it becomes much easier.
Austin

Line Chart with Multiple Series

Post Author: JayZee
CA Forum: Charts and Graphs
HI
I am trying to create a line chart with multiple series for trend analysis on CR XI but not having much luck, I thought it would be so simple to do!
My data is provided summarized on the server and is returned as 12 rows:
Month Year1 Year2 Year3 Year4 Year5January 100 80 75 90 120February 85 25 40 25 80etc for the rest of the months
My problem is that I can only get the chart to accept the values to display as a summary and not just as the data pulled back from the server. I have read an article on the support site for Crystal 6.0 but it doesn't seem to translate well into XI.
If necessary I could redesign the table to bring back un-summarized data but that is quite a big job.
Any help greatly appreciated.
Jay

Post Author: Tim Wise
CA Forum: Charts and Graphs
In the chart expert, put Month in the 'On change of' box and put each year in the 'Show values' box. This puts the month on the x-axis and plots each year as a line.
Is that what you want?
I did this in CR 2008 using your data in an Excel sheet.

Bar Graph with multiple series

I am trying to created some graphs in 10g reports. I want a graph that has 2 bars per group. On the layout tab I have column A and Column B on the bars line and Column C on the groups line. When I run the report Columns A and B show up as 1 bar on the graph. Where do you specify the values for series 1 and series 2?

Hi,
When you create a bar chart using a "group by" attribute, the resulting groups are displayed as stacked bars or as dual Y bars (shows the groups side by side). The button in the chart's toolbar (with stacked bar chart icon) is used to change this presentation. You can display the data as it is, without aggregation, by using the line or scatter charts. The line/scatter graphs should allow you to display multiple Y values (series), but there appears to be a bug that causes a single line to be displayed instead. Multiple series bar charts and label renaming are not available in the current release.
Thanks,
Marat

BI Publisher 11g. Plotting multiple lines in a line graph

Hi,
We have a requirment where we need to show multiple lines in a line graph. I have gone through the earlier posts for this topic but when I am following the same steps I am not able to resolve the problem.
I have 3 mterics: Month (which will be X-axis) , Size (Which will be on y-axis) and Name. I have names for 10 tables and i want to display 10 lines in my line graph.
In the chart generator, I am using Month in "Labels", Table name for "color" field" and size in the "values" section.
When I am trying this I am geting the following error in chart generator. It says " The data required 2 columns. The data has only 1 column." To trick the system, I also put a dummy column with static value of 1, but then also i am getting the same error, that it requires 2 columns.
the sample XML for the chart is like this:
<G_2>
<TABLE_SIZE_TRENDS>43.90832000000001</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table1</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
- <G_2>
<TABLE_SIZE_TRENDS>69.62872</TABLE_SIZE_TRENDS>
<TABLE_NAME>Table2</TABLE_NAME>
<MONTH_NAME_TRENDS>April</MONTH_NAME_TRENDS>
</G_2>
It looks pretty straightforward but I am stuck in it for quite some time now.
All your guidance is greatly appreciated in this regard.
Regards,
Aakarsh

any help? still need help. thanks

ADF Line Graph with dynamic series - can do ?

I want to implement a drill-down from a high level line graph into a lower level line graph. The master graph may have 4 series in it, and each of these 4 series may have 6 - 8 different sub-series that need to be shown in the lower level graph (so up to 30 in all sub-series). Rather than create 4 of the lower level graphs, what I'd like to be able to do is create the lower level graph once using a VO which reads the master graph context. The definition of a graph model however in the ADF at first glance doesn't appear to cater for this. Have others done this ?
Thinking that if I could:
a) define the detail VO so that it used generic columns for the series amounts
b) was able to override the series attribute name/label used for the legend etc. by way of code (backing bean?) for each series again based on context
c) was able to optionally hide a series that was not needed (as defined by the generic detail VO) for a given master context
... then maybe I'd have a chance. But b) and c) don't look catered for.
Anyone?
Using 11.1.

For the record, I gave this a go, and was able to get it working satisfactorily. There was no way as far as I could tell to set the visibility of a series. So essentially, what I've been able to do is set the series label to blank, set the line width to 1 (min, doesn't seem to honor 0), and the color to white to match the background of the chart ... for those series that are superfluous in a given chart render. It works fine except for the fact that if you've used the highlight rollover series effect, if you move the mouse over the legend area where the "hiding" series are, you get a bit of flashing on the legend entries that are displayed.
Ideally, we'd have a way of actually taking these out entirely. If there's a way to do it, I'd be interested in hearing about it.
Thanks.

Multiple Line Graph

First off, thanks to kglad for the line graph function I
started with, it has been a huge help. Now the step I'm trying to
take is 2 fold.
First, I'd like to graph more than one line segment on the
graph. Right now I am graphing functions f1 and f2, but f2
currently overwrites f1. I want them to coincide so f1 goes from
x=1 to x=15, f2 goes from x=15 to x=25, f3 goes from x=25 to x=10
at a different y (these are all curves), and finally f4 goes from
x=10 to x=1 creating a closed shape. Also, I want the x values and
the y values to be variable based on the temperature. I'm using
PV=nRT and n, R, and T are all known. so I have something like
P=nRT/V where P is y, V is X and the nRT can be calculated for two
steps of the 4. The other two steps are adiabatic, so Q=0, I don't
know yet how to fit the lines but i do know that y = a / (x^(5/3))
is a formula that works, I just need to find the proper a values
for steps 2 and 4.
Part two of this issue is that currently the graph is drawing
as the whole canvas, which is fine for testing until i get the
multiple line part worked out; however I only want this to be 1/4
of the viewing area as I have other movie clips and such to put on
this. A conceptual drawing of what I plan on making can be found
at:
http://www.students.bucknell.edu/gbement/Steps.html
I'm a novice to Actionscript and movie clips, I previously
did everything with motion tweens and nothing was dynamic. I plan
on creating the piston and molecule simulation in another movie
clip, then I can vary the play speed relative to the hot and cold
temperatures by looping the movieclip and having it play faster for
a high T and slower for a low T.
Any help on any of my many issues would be greatly
appreciated and the user will be recognized for their assistance in
my research presentation :)

Hi Arun, thanks again for the help but upon closer inspection
(along with only a basic knowledge of java and actionscript), I
think your script would need editing to work for me (editing i'm
unsure of how to do). What I'm looking for is a graph that will
create a line based on a function. Much like y=(a*b*c)/x or
y=(a*b*c)/(x^1.66) The a*b*c would be complicated also, but here's
what i've thought up on paper that I have to move to script, I hope
this is useful:
Step 1: Calculate the a*b*c
The original function is PV=nRT , nRT being the a*b*c ,
however the Thot and Tcold terms are input boxes that the user
types in before hitting the "go" button.
So I have to do this much:
tcold = Number(tcold_num.text);
thot = Number(thot_num.text);
var n:Number = 1;
var R:Number = 0.0825;
var a:Number;
var b:Number;
var c:Number;
var d:Number;
a = n*R*thot // Step 1 constant
b = // Step 2 constant (formula to be finished :-/) Looks to
be a formula using ((b) / (Math.pow(x, 1.666)))
c = n*R*tcold // Step 3 constant
d = // Step 4 constant (formula to be finished :-/)
Then I need to find a way to initialize axis to line the
graph, I can label the P and V axis using static text boxes later I
suppose.
The problem I have with yours that I don't understand is that
I could add the function into the y part of the addLine() function,
however it's noted as inity= y1 (requires a number), and the
function definition has y1:Number.
Now the issue i'm tackling below is just a newbie's lack of
understanding (i hope), but the script kglad wrote (snipped below)
will graph one line, and i can't figure out for the life of me how
to write this up to graph more than one instance without
overwritting the previous line. Again, Thanks for the help so far,
it has helped me find the points where I lacked direction and solid
ideas before.

Line Graph Problem when used with Series

I am facing a problem with Line Graph in Oracle Reports 10g.
I have made a graph having series of three curves.
The graph is perfect when all series have similar X-Axis values. See the link
http://www.sysautomation.com/ask/RPT_LINE_GRAPH_OK.PDF
But same graph does not print curves properly, gives spaces in the curves, when all the series do not have similar values on X-Axis
http://www.sysautomation.com/ask/RPT_LINE_GRAPH_NOT_OK.PDF
Pl. guide me what to do to make this graph working.

Thanks for reply.
In my case, I have to plot curves.
and some Series have different X-axis values.
I have no choice, but to plot them.
The same thing was working fine with Reports 6i + Graphics 6i.
What is Scatter Plot?
Thanks again.
This is a limitation in the current line graph in
Reports 10g (9.0.4). I can't recall whether this has
improved in 10.1.2 or it was planned for the next
rev.
Would trying a scatter plot be better?
Line graphs are normally meant for regular intervals
on x-axis, so using the example of dates, Jan, Feb
and Dec would be placed right next to each other,
rather than scaled with the right distance between
Feb and Dec.

3D columns graph with multiple series

I need to obtain a graph like below.
I want to insert other series into Y axis. It's possible?
thank you.
Daniele.b75

Hi,
Yes, there is no build-in chart template that you want. We can only use the Gradient fill to close your request. But, it can't display the multiple series in cumulates chart.
In my view,
custom a chart via VBA is also a good workaround. I'm not familiar with VBA, if you have further question, I recommend you post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Engage 2008: Line Graph, can't start 2nd series @ different X value

Using Xcelsius Engage 2008
Created line chart w/ 2 series
2nd series does not start at the same X value as series 1.
How do I generate the second series so the initial part of my 2nd series line does not show all 0s?
Thank you
Nancy Griffin

Hi Tammy.
I'm using Xcelsius version: 5.0.0.99 and Build number 12,0,0,121.   I am not sure if S1 is already installed. If not, where can I get it?
This is what I'm trying to do:
1) created a basic line graph with two series
Series 1 Data has 2 columns
Series 1 Column 1 includes dates. THis will be the labels for the X axis:
1/1/07
1/6/07
1/12/07
1/1/08
1/6/08
Column 2 includes the line graph data for series 1
30
50
10
90
120, etc
Series 2 column 1 - THis is the same as series 1 since it includes the same labels for the X axis
Series 2 column 2 includes the data for the 2nd line graph
HERE's WHERE IT IS DIFFERENT
I have no data for dates 1/1, 1/6, 1/12/07.   My data starts in
2008. I don't want the graph to show 0s for the first 3 dates and then jump up to the 2008 data.   Is there a way to make the 2nd line chart start on 1/1/08?
thank you. Really appreciate your help.

Multiple symbols for line graph in illustrator

I can't figure out how to change the default square data points in a line graph. When I try to got to Object>Graph>Marker it is greyed out. When I click on a circle symbol and then try to go to Object>Graph>Design, it is greyed out. I am so frustrated trying to do the simplest things in this program. The online tutorials on how to make graphs do not seem to explain the simplest of tasks, only the difficult. Thanks for any help!

Skeptic,
Yes, it's cumbesome, but it's described in Online Help (at least in CS3 and prior):
Draw whatever you want to use for the marker. (It can be a Symbol; doesn't matter.)
Draw a rectangle and send it behind the marker artwork. For a marker on a line chart, the size of the rectangle relative to the marker art defines the scale.So the rectangle can be smaller than the artwork to make the artwork larger, as shown above. The rectangle can be unstroked, unfilled so it doesn't show.
Select both the artwork and the rectangle. Group. Leave it selected.
Object>Graph>Design. In the dialog, click New Design. Click OK.
Black pointer: Select the graph. Object>Graph>Marker. In the dialog, select the Design you just created. Or...
White pointer: AltClick a single marker in the Graph. AltClick it again to "select up" (Illustrator's upside-down selection scheme) to the parent group. AltClick again to include the legend marker. Object>Graph>Marker. In the dialog, select the Design. This way, you can assign different markers to the various lines in the line graph if you want.
JET

Help with jfree regarding plotting multiple lines in a line graph

hi,
i have
< time>
< volume>
i have sucessfully used this data to plot a line graph(1 line)
now i have
<time> <time2>
<volume> <volume2>
how do i put this values into a single line graph? that means, i will have a line graphs with 2 lines.
Help appreciated. Thanks Alot

any help? still need help. thanks

Multiple series on anychart line graph?

Similar Messages

Maybe you are looking for