How to fix the "MIME types" problem !

Hello !
How to fix the problem of "MIME types", Windows doesn't want to keep the APPS by default !!!
When I try the application by default (for ex. right clic on .PSD files and "open with"), then I validates the selection program (Photoshop.exe), it does not appear in the selection of programs by default in windows!
Result, even dynamic objects no longer open in my applications and all adobe files icon don't appear in explorer
Thx

I find a solution who works for me (Win7 64bit) !
Use a Registry cleaner (ccleaner) and kill old file format entry !
Now restart association with a .AI file, because the way to .exe is in another place like other apps !
Try this:
First, right click on your illustrator apps icon (desktop or Start menu) and choose "open the file location" and copy the dir ("C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows" for me )
Right clic on your .AI file and select "Open with", now click on "browse" to "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows" for 64bit system.
"Windows" say "you've got problem with registry file association" the correction's automaticatly and the illustrator icon appear in the list of default apps.
Select and valid him
Now, do the same for all your "unknown files type" with the good apps !

Similar Messages

How to determine the MIME types of the files?

I'm making an application, in which I've to upload the files to the database. Now I want to insert into the database the MIME type of the files. Now how can I know that which type of the file is having which MIME type?
where can I get the list of all supported MIME types?
Even if I get the list, then every time I update the file in the database, so every time I have to check the file extension and then insert the MIME type...
this seems to be a tedioius job..
Is there any simple way to do this?

I could ask "supported by what?" but I assume you will
be the one supporting them. Here's a link to the
latest list of registered MIME types.HERE's the link...
ftp://ftp.isi.edu/in-notes/iana/assignments/media-types/media-types

How to get the 'mime-type' of a Resource accessed via WebDAV

Hello,
When a document is uploaded into a folder which is managed by a WebDAV RepositoryManager we don't see a Property 'mime-type' or something like that.
Our code:
<i>IPropertyMap lijstProp = tempResource.getProperties();</i>
In the list there is no Property 'contenttype' or something like that!
This is a bit of a surprise to me since it seems to me a very relevant Property of a Resource.
How can the mime-type/contenttype of a Resource managed by a WebDAV Repository Manager be determined?
Kind regards,
Maarten Rutten

Hi Thilo,
We access the Resources via API.
When I use "IPropertyMap lijstProp = tempResource.getProperties();" I assume that ALL the available properties are in 'lijstProp'.
(is this correct?)
I don't have the Property "contenttype" available in 'lijstProp'.
A workaround could be that when adding documents to a folder via API's, we also should set this Property via API's.
But when documents are added directly into the WebDAV folder we don't have that option. So, when we find a Resource with the Property 'contenttype' missing the only option I see is to 'calculate' the contenttyype based on the extension of the Resource.
Do you agree?
Kind regards,
Maarten

How to get the MIME type of the given file in R/3

Dear Experts,
Please tell me the FM or Class to get the given file MIME type in R/3 . I am using GUI_upload Function module to upload the file in R/3 .
Edited by: balaji ramadas on Jan 16, 2009 5:39 AM

Thank you Prosenjit I m using this FM CV120_GET_MIME_TYPE
to get the MIME type of the file
regards,
Balaji.R
Edited by: balaji ramadas on Jan 19, 2009 9:24 AM

How to get the mime type of the workflow attachment attached to workitem id

Hi Experts,
I can attach different types of attachment to the workitem id, lets suppost the attachment type attached is pdf, for this attachment I have an requirement to send the mime type as well. In this case the mime type is 'application/pdf' for pdf files.(for text file it is 'text/plain' and for zip file it is 'application/zip' and so on)
Do I have any place in ABAP world where I can get the mime type for different types of attachments.
I dont want to hard code the mime types, and I have checked the transaction 'SMW0', but not sure if this is the correct place to get the mime type.
Do you see any other way or tables which stores all these mime types.
Any help/suggestion would be appreciated.
Thanks and Regards,
Neerup.

Hello,
Perhaps this can help:
http://help.sap.com/saphelp_nw04/helpdata/en/ad/ebe5cc1d75aa43a2871717d76f475d/content.htm
If you want to know the table name, turn on tracing (ST05) when accessing the MIME types.
regards
Rick Bakker
Hanabi Technology

How to extract the mime type using HttpExchange?

Hi,
I am using Sun httpserver to implement an HTTP Server. I am implementing the class HttpHandler and so implementing the method,
public void handle(HttpExchange t) throws IOException
}I just need to know, in the above method, is there a proper way to know the Content-type to know the mime type? Or I would have to traverse through all the headers?
Regards,
Kashif

[HttpExchange.getRequestHeaders()|http://java.sun.com/javase/6/docs/jre/api/net/httpserver/spec/com/sun/net/httpserver/HttpExchange.html#getRequestHeaders%28%29] returns a Map...

How to get the Mime Type of the file?

Hi Everyone!,
I want to upload a random file into my table as a BLOB and simultaneously want to fill the respective another column with its MimeType. Earlier I used Oracle Apex for this, but due to my new requirement I need to make this happen with the help of PL SQL and Forms. Could you help me in getting how we can upload the file and most importantly, how we can get its Mime-Type.
My chosen file can be of any type; it can be doc ,pdf,txt,xls ,gif or any other format.
If you could provide the example with your reply then it would be great.
Thanks
Harbinder

hi
for that u have to use webutil.
declare
      f varchar2(100);
begin
     f := webutil_file.file_open_dialog();
     if f is not null then
          :doc.doc_name := f;
          end if;
     end;and
     DECLARE
filename VARCHAR2(256);
BEGIN
filename := CLIENT_GET_FILE_NAME (File_Filter => 'jpg (*.jpg)|*.*|');
READ_IMAGE_FILE(filename, 'jpg', 'image');
END; sarah

How I FIXED the black out problem!

I posted this in another thread, but thought it might get lost, so I'm posting it here in the hopes that it may help others who are out of warranty and have nothing to lose.
Please know that this is a very diffcult procedure and if you're not comfortable with the idea of possibly destroying your entire laptop, don't even think about trying this!
First, you will need to download the appropriate service manual for your model PowerBook:
http://home.earthlink.net/~strahm_s/manuals.html#pbks
Second, I would highly recommend that you go to your local Radio Shack and pourchase the correct tools. You will need a set of precision screwdrivers and a Torx #8 (I think) also. I also recommend that you obtain about 15 of those little zip lock baggies that they put extra coat buttons into (of course any bag will do).
As you take apart the laptop and remove the screws, you should place each screw set into a bag and label it with a Sharpie. Believe me, this is worth the time and effort to do this. The service manual will list an Apple part number for the screws as you take them out. When you reassemble the laptop, you will simply find the part number of the screw you need.
The Problem (Overview):
My screen would flicker between all black parts in the lower 1/3 to 2/3rds of the display. Adjusting the angle of the display would generally fix the issue until it was moved again or needed another adjustment. I used it like this for a few months before it finally was no longer fixable by simply adjusting the display. One day it just wasn't fixable by adjustment anymore. I couldn't see anything above 2/3rds of the display. previously, the powerbook had been dropped on the corner by the power plug, and must have caused damage to the display.
At first I thought it was a loose connection in the LVDS or video cable, but upon taking the entire unit apart, I found that the cable was very secure and no amount of jiggling it had any effect on the display itself. It definitely wasn't a pinched cable or loose connection in the cable.
I then started a search to buy a replacement screen. And upon taking the unit apart to remove the panel itself from the rear casing, I would preiodically plug the power back in and power up the PowerBook to see if anything I was doing was having any effect on the display. With the rear casing removed, I noticed that applying slight pressure on the rear of the screen on the left middle edge would affect the display and cause the image to appear again perfectly.
Obviously, I couldn't use the PowerBook this way, so I cut some narrow strips of rubber and used a glue stick to adhere them in the same spots where my fingers were. With the rear casing snapped back in place, it applied direct pressure to this same area, resulting in a perfect picture!
The actualy rubber pieces I used came from underneath the Airport card, so if you want to use something else, perhaps a strip from a bicycle innertube would do the same trick and would be of the same thickness.
Since putting it back together, the image is perfect. I have noticed that some [hard] direct thumping of the display bezel or hard shaking of the unit will cause some flicker, but in the past, even the slightest motion would knock the image out. So IMO, this is an incredible improvement. Since my "repair" I haven't had the issue appear once!
If you have no other solutions to try, and are somewhat savvy with taking things apart, give my method a shot. I'm just amazed that it works so well!
The image is of the rear of the panel. Facing you, it would be the left side of the screen. Where you apply the strip may be in another location. I don't recommend putting it anywhere except on the edges of the screen or you will likely damage the panel or introduce spots or pressure smudges. Good luck!
BTW, you may be able to test to see if your panel could be fixed with a similar approach by gently squeezing the sides of the display while it's connected to your laptop and watching for the screen to come back or flicker more. In my case, the squeezing definitely affected the image quality: when I applied pressure the image was stable. When I let go, it went to $hit.
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.7) 320GB/5GB/16xSD/AE/BT/Radeon x800/iSight/30" ACD/nano
PowerMac G5 Dual 2.5GHz Mac OS X (10.4.7) 320GB/5GB/16xSD/AE/BT/Radeon x800/iSight/30" ACD/nano

I just switched to Roadrunner and am having the same "can't send email" problem. I have done what you suggested, but the problem persists. I did note that in my outgoing mail server box it says: smtp-server.wi.rr.com:jzelinger3 (Offline). I'm not sure where the "Offline" is coming from or why it is there. Any suggestions? I performed the following Terminal tests with a tech. support person from Roadrunner:
Last login: Wed Jan 21 19:36:52 on console
CPE-75-86-226-41:~ joan$ telnet pop-server.wi.rr.com 110
Trying 71.74.56.78...
Connected to pop-server.wi.rr.com.
Escape character is '^]'.
+OK POP3 server ready.
user [email protected]
+OK please send PASS command
pass laikatess
+OK [email protected] is welcome here
telnet smtp-server.wi.rr.com 25
-ERR Invalid command; valid commands: CAPA, DELE, LIST, LAST, NOOP, RETR, RSET, STAT, TOP, UIDL or QUIT
This is very frustrating.
J. A. Zelinger

Here are the instructions on how to fix the newest update problem with the .dll error message:, Here are the instructions on how to fix the newest update problem with the .dll error message:

Go to My Computer, Uninstall Programs, and uninstall in this exact order :
      Itunes
      Apples Software Update
     Apple Mobile Device Support
     Bonjour (my system required a reboot on this one)
     Apple Application Support
Reboot your computer, go to the official Itunes website (make sure it's the Apple Itunes Website and not some other one!), and reinstall Itunes.
I got the same .dll error message after the reinstall, but my Itunes was downloaded successfully and I was able to Sync my phone. : )
Good luck to you and God Bless!
(Sad that we have to come to the Discussion Forum to figure this all out instead of Apple taking care of their business and helping us out, huh?)

Someone else said they did a system restore to a previous update, and then a java update and that worked for them, saying they were going to stick with the earlier version of itunes until they get the bugs out of the new one. I t tried restores and that didn't work for me either, but maybe it will work for you. Good luck and I hope you get it working soon..

How to fix the Shift key problem in Brio 6

Hi,I'm at Brio/Hyperion Intelligence 6.6.4.40 and need to install the patch to bring Brio to 6.6.4.44. Is this patch available on the web?thanks,-john

Contact Brio Support, Raise a service request, and they will provide you with the patch

We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?

We downloaded Office2008 update June 13th. Now our Office programs won't open. Is this happening to others? Does anyone know how to fix the problem?
This is the message box content we get when trying to open Word:
Process:         Microsoft Word [309]
Path:            /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
Identifier:      com.microsoft.Word
Version:         ??? (???)
Build Info:      Unknown-101117~0
Code Type:       X86 (Native)
Parent Process: launchd [109]
Date/Time:       2011-06-14 05:34:15.752 -0400
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Sleep/Wake UUID: FDFC3F45-E8C8-4D18-A0C4-EA3C76AD2547
Interval Since Last Report:          11753 sec
Crashes Since Last Report:           14
Per-App Crashes Since Last Report:   12
Anonymous UUID:                      DDF6AE0D-E118-4768-9B04-8CDCB6D7C62E
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/MicrosoftComponentPlugin.framework/Versions/12/M icrosoftComponentPlugin
Referenced from: /Applications/Microsoft Office 2008/Office/Microsoft Word.app/Contents/MacOS/Microsoft Word
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld

You will need to contact Microsoft for a fix. They also have a message board. Post there if you cannot find an answer after searching their message boards.

I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak - I think that my ear piece and mike have both got magnetised how do fix the problem

I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
I think that my ear piece and mike have both got magnetised how do fix the problem
Please help

I have the same problem!! It lead to many other problems with my phone
I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally!

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone.

How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

What "auto shutdown problem" are you talking about?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

How to fix the "MIME types" problem !

Similar Messages

Maybe you are looking for