How to fix the VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0

Hi Team,
While deploying RHEL6.0 i am getting error "VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0" Please let me know how to fix this issues.
Thanks
vmware tech

theoretically all I need to change would be
changed it to var handd = new hand();
change stage.addChild(hand);    to     stage.addChild(handd);
and the part im unsure on is
   else
                    trace(fl_SecondsCounted + " sec");
                    hand.rotation = hand.rotation + 6;
                    fl_SecondsCounted--;
do I leave that part or change it to handd.rotation = handd.rotation + 6

Similar Messages

Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?

Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.

Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
http://docs.info.apple.com/article.html?artnum=93069
I hope this helps other people!

HT4623 how to fix the itune error an unknown erroe occured (310)

how to fix the itune error an unknown erroe occured (310)

https://discussions.apple.com/message/24177027#24177027
Can't connect to the iTunes Store

How to fix the E225 error on the MF 4380 dn printer

How to fix the E225 error on the MF 4380 dn printer

Hi okekeP,
The imageCLASS MF4380dn was not released by Canon USA in the United States, but was distributed in other markets such as Canada, Europe and Australia. I would recommend to referring to the Canon support group for your geographical area to ensure the proper support application is being used for your product. However. I will be happy to offer some assistance.
The closest US model would be the imageCLASS MF4370dn. The recommendation when the error occurs with this model is to perform a reset the product. If you have not done so already, please attempt to reset your laser printer as outlined below:
1. Disconnect the power cord attached to your machine while "on" for up to 10 minutes.
2. Reconnect the power cord for the unit and plug it into a different known working outlet direct to the wall (not a surge/power strip) to ensure it is receiving full power.
4. Once your unit has initialized, confirm an error is not displayed in the LCD.
If unresolved, please refer to your Canon support contacts for further assistance and whether a firmware update may be available to address the issue or if service may be required.
In case helpful to you, here are direct links to the product page for your laser product:
- if your product was purchased in Canada, you can visit the product page for your laser device on the Canon-Canada website, www.canon.ca.
- if your product was purchased in Australia, you can visit the Canon-Australia website, www.canon.au.
- if purchased in Europe, you can visit the Canon-Europa website, www.canon-europe.com
I hope this is helpful to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Error Downloading KickStart File

Folks,
I am trying to install OEL5 using KickStart.
1. I have kickstart file on my USB
2. I boot HP 580 system from CD Room
3. On booted first screen I have typed following commands,
a. linux ks=hd:/dev/sda1:/ks.cfg
b. linux ks =hd:sda1/ks.cfg
c. linux ks =file:/sda1/ks.cfg
d. linux ks=hd:/dev/sda1/ks.cfg
Nothing works for me , i tryed changing "sda1" to "sdb1"
I tryed all the front and back usb ports. I got an error that Error Downloading KickStart File or some time it said file doesnt exit.
Second option:
I tryed was that I put the Kickstart File and OEL iso's on windows box and installed the NFS share and use following URL.
I booted the system from CD rom and on first screen , i typed following
linux ks =nfs://10.32.14.46:KS/ks.cfg ksdevice=eth0 ip=10.32.200.3 gateway= 10.32.200.1 netmask=255.255.255.0
From Second option, it gave me error that error downloading KickStart file.
Third Option
==========
I tried both of the following,same Error ..Unable to download Kickstart file"
linux ks =hd:/dev/cciss:/ks.cfg
linux ks =/dev/cciss/ks.cfg
Anyhelp would be appreciated.
Edited by: user8979739 on Mar 2, 2010 6:28 AM

You can do it with a windows DHCP server. The article doesn't detail how but here is one that does. I haven't done it personally but it should work.
http://joystickjunkie.blogspot.com/2009/02/configuring-windows-2003-dhcp-for-pxe.html
You only need the script if you want to automatically get the MAC address to dynamically add leasing information to the DHCP server. In other words, You have alot of servers you want to do at one time. You can pull the MAC address from the switches and add leases to DHCP server based on those MAC's. The DHCP server then would server the boot file you want them to have. You can still manually add the MAC reservation in DHCP. You should be able to go into the BIOS and pull the MAC address of the Ethernet adapter to set the reservation in DHCP.
I don't know of a way to do this in windows. In Linux it is rather easy.
The way I do it is just add the reservation and then only have one setting in netboot services for 0.0.0.1. I then add the different OS's and given them a name. I can then just boot the server to PXE and then select the OS I want to load. You can get fancy and add the IP in the reservation to netboot. You can then tie that IP to get a specfic OS load. The problem I have with that is there is no warnings given and boom your server is toast if someone does it unintentionally.
One other thing to consider is if you have multiple nics. If you do. The kickstart loader will prompt you which one to use. So you will have to answer that prompt or you can disable all but the one you want in the BIOS. That way you just have one prompt. The one that chooses the OS. I know I have simplified it somewhat. You should be able to read the articles and get it up and running without much effort.

I did the Downgrade to 10.7 / How to fix the 42408 error?

I did the downgrade iTunes to 10.7 (Because everybody who is into organizing the library knows that iTunes11 *****)
And im getting this 42408 error?
How to fix it? i really need to Authorize the computer.
I want to sync my iPod and all the Apps.
I did all the replacement of itunes library.itl
the AppZaper and Pacifist stuff
HELP PLEASE!!

Thanks, I tried your idea.
But doesn't work
Now im gonna try this:
McGroarty
Re: From iTunes 11 back to 10, but (-42408) error
Nov 30, 2012 6:05 PM (in response to blackxacto)
To get rid of error -42408:
1. Close iTunes
2. From a terminal: killall iTunesHelper
3. Unplug any iOS devices
4. Restore these from a backup of /System/Library/PrivateFrameworks/ - you want to replace the current versions when Time Machine (or whatever you use) asks.
AirTrafficHost.framework
CoreFP.framework
DeviceLink.framework
iTunesAccess.framework
MobileDevice.framework
Reboot before loading iTunes or reattaching any iOS devices for good measure.
Good luck!

Can anyone tell me how to fix the problem with downloading music? Now with the new iOS5

Ever since the new iOS5, and now 5.1, whenever I download music, and play it on my iPad2, the album cover will "flash" white between each song, whereas before the picture would hold steady for the duration of the album play! I have to admit I find this REALLY annoying! Even syncing with my MacBook doesn't fix the problem...any ideas?

Hi Jane,
First, regarding the virus issue, although I cannot promote any specific 3rd party software, there are plenty of FREE and very good anti-virus apps out there. You can Google 'free antivirus" and a good list will come up. You may want to look at a few reviews before you try. I don't know if you use Mac or Windows so you may have to do a little research on which is best for your computer platform. You can run the software and it will help clean off your system if there's a virus.
Second, regarding your Elements sync to Revel, you may need to disable and then re-enable the Revel sync agent from within Elements, which you find in Preferences. In addition you may try signing out and then back into Revel via Elements.
Let me know how that goes. If the disable/re-enable doesn't help, I'll get an Elements team member to see if they can help.
Best of luck on the virus software!
Glenyse

How to fix the script error in my firefox?

I'm having problems on my firefox. I'm using it for school and every time I'm logging in to do my assignments, the script error turns up. I have tried to do anything and look at support forum but it still did not work! Please email me of how to fix this issues!

Hi,
Thank you for your question. I understand that when you login to do your assignments a script comes up. However I do not know where it is to login.
For example, if you are logging into a website clearing the data on the mobile device can reload the script if it has become corrupt. However if the script normally runs a certain amount of time it is also possible to extend the time of the script warning. [[Warning Unresponsive script - What it means and how to fix it]]
If the script error is not an unresponsive one, please do provide the error message and I would be happy to investigate.

How to fix the Log4j error due to old version of log4j jar bundled with jre

Hi,
We have a webstart application which budles the latest log4j.jar (ver 15), but for some users at startup after the app is downloaded the newer version of the log4j jar is not loaded - We get a NoSuchMethodError when we try to use the trace() method of log4j. Question is how do we ensure that our app always picks up the newer version of log4j jar bundled with the app and not the one in the lib/ext folder of the jre,
thanks

I think we both have similar issue Thread
Do anyone knows why this is happening?

How to fix the internal error 80140AOB of psp 3004

when i try to connect internet it shows (internal error 80140A0B) please help me how to fix it

PlayStation has a separate community which can be found here Please visit it for best assistance with your PSP. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

How to fix problem "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator"

Hi,
I'm using qm 8.5.2 (endpoint recording) most of customer PCs cannot play recording file in application.
When I launch application and try to play recoding file, it is stuck and show error message "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator." I've install all cilent requirements (validate pc is pass). The error still occur. Even though all requirements are complete .
So, How to fix this problem.
Thank in advance
Namkhao

Hi bsetexast,
I'm fix this problem by using Java(TM) version 6.0.200.2 that can be download from UCCX when first run CSD (supervisor desktop). Even other higher java version is valid but this problem still occur. If you install higher version, you should uninstall it first and install this version as well.
If you cannot find them, I will send you via email.

How to view the tomcat errors in another file

hi friends,
i am starting tomcat by using startup.bat, in the console i can see the startupe messages, but when i execute the jsp page it throws some errors, because the window run fast i cannot see the previos errors.
how to redirect these errors in to a file ???
i tried using startup.bat > error.txt, but there it is not writing the errors.In tomcat logs also i cannot see the errrors.
can any one telll how to see this
thanks
vin

Tomcat uses the log4j API. You can put a log4j.properties file in your application classpath (WEB-INF/classes/log4j.properties) and in that properties file you can redirect tomcat log output to a file. The content could be like this:
log4j.properties:
# a default stdout console appender. When debugging from an IDE, this will end up in the output window
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
log4j.appender.stdout.layout.ConversionPattern=%d %p [%c] - %m%n
# tomcat file log appender
log4j.appender.TA=org.apache.log4j.FileAppender
log4j.appender.TA.layout=org.apache.log4j.PatternLayout
log4j.appender.TA.layout.ConversionPattern=%d %p [%c] - %m%n
log4j.appender.TA.File=c:/log/tomcat.log
log4j.appender.TA.append=true
# configure the tomcat logger to use the tomcat file appender. Only warnings and higher are sent to the logfile
log4j.logger.org.apache=WARN, TA
Check out the log4j documentation for more details.
Edited by: gimbal2 on Feb 5, 2008 3:19 PM

How to fix the -15006 error when playing to remote speakers.

A quick fix that worked for me was to click the wifi symbol in the system bar (top right of computer). I turned the airport off – waited a second, then turned it back on. Having iTunes off during this process seems to help as well.

Thanks bitwise.
AirTunes works by first "finding," and then, establishing a secured communications link between the iTunes host and the AirPort Express Base Station (AX) or Apple TV. Once this link has been established, it can then start the streaming process. Also periodically through the streaming, AirTunes checks to see if the link is still valid.
Most likely, something occurred to break this link, and thus the error message. By using the AirPort icon, you basically "forced" a break between the iTunes host and the AX. This provided AirTunes with an opportunity to re-establish the link, and then, to continue on with the streaming.

How to fix the ios 6 download. Battery draining problems

how do you fix battery draining issues after installing the 6.0.1 software

Search the forums, there are hundreds of thousands of postings on battery issues.

HT3204 How to fix the following error?

Connection attempt to firmware update server was unsuccessful.
An unknown error occurred (0x80096004).

When I start Encore I always receive a warning that I do not have Quicktime installed
Since I do not use QT in any way, I ignore the warning and Encore works just fine
I also do not use menus from AE, so there MAY be something to look at
Does Encore work properly if you use one of the built-in menus?

How to fix the VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0

Similar Messages

Maybe you are looking for