How to force the Lync Client to a specific server in the pool
I am troubleshooting an issue and need my client to connect to a specific server in my enterprise pool.
I have tried a host fie, I have deleted the EndpointConfiguration.CACHE file and I still cannot get my client to connect to the specific front end.
Can anyone tell me how to do this?
Using a host file should definitely work and I do this all the time for testing.
Are you using manual or automatic configuration? If it's manual then make sure that the name you specified resolves to the correct IP address by using PING.
If you are using automatic, use NSLOOKUP to determine what hostname it's trying to connect to and repeat the above.
This could either be sip.domain.com (as Edwin mentioned) or it could be the name of your Front End pool, depending on how it's configured.
The other thing you might want to try if everything looks correct and if you modified your HOSTS file while Lync was open, is just to Exit and re-open the Lync client.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
How to Force the Good Plan present in dba_hist_sql_plan for an SQL_ID
Hi Folks
Here i have a question on how to fix the query execution plan for which we are facing the problem. The current execution plan of the SQL ID is bad , but the execution plan in dba_hist_sql_plan or v$sql_plan is showing good one's.
So how to force the plan_hash_value present in dba_hist_sql_plan or v$sql_plan to the current sql. Where in we cannot try using any kind of hints in the SQL so my question here , is there any way to update manually to update the plan_hash_value for the SQL_ID so that it can use the execution plan which we want to force.
Regards,
Phani.But my question is i have the good plan for the SQL_ID which is now running with the bad plan ( I am able to see the good plan in dba_hist_sql_plan view ) , my challenge here is how to force >the SQL_ID to take good plan PLAN_SQL_HASH_VALUE. Once the query is parsed and in memory I'm not aware of any way of changing the plan :(
A day later a similar situation came up with one of our clients. I'm still not aware of any way to manually change the execution plan of an already parsed SQL but suspect histograms and/or bind peeking may be a way to explain this phenemenon
Edited by: riedelme on Jun 18, 2010 6:13 AM -
Dear Lenovo Community, Happy Holidays to you all and wish you a great happy new year. Recently purchased a Bluetooth OBDII device and have difficulty making it to work with its provided software on my T61 (running original XP Home). My short story and question/problem is that I can open "My Bluetooth Places" and pair with the OBDII device as an "OBDII SPP Dev", but my T61 assigns serial port COM19 to it. The OBDII software which came with the device only can let user set to one of the COM1 to COM8 ports and in the properties of Bluetooth pairing, there is no way that I can select which COM port to use. I looked at the Device Manager and I do see these COM port assignments: COM4,5,6,7: Sierra Wireless (the HSDA modem in the laptop which I have never used BTW) COM 9,10,11,12,13,14,15,16,17: Bluetooth Serial Port COM 18, 19: Bluetooth Communications Port and I don't see anything for COM1,2,3, and 8 My question is how to force the computer/OS to assign one of the COM1 to COM8 ports to my device upon pairing? Can I disable the Sierra Wireless model from the COM ports list and hope this will happen? Thanks for your help and inputs beforehand. Regards, AL
Hi, AL_K
Have you attempted to change the port number in device manager itself? If you navigate to Device Manager and open the list of Ports, you can right-click on the device you wish to assign a different port number. After right-clicking, click Properties. There should be a tab called Port Settings. In here, you should find a setting to manually assign a port number.
Good luck, and let me know how it goes,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
How to force the Netscape Browser to open the "Open or Save" dialog box?
Hi, I tried to force the browser to open the "Open or Save" dailog box for downloading a file.
response.setContentType(context.getMimeType(file.getName()));
response.setHeader("Content-Disposition", "attachment; filename=\"" + file.getName() + "\"");
This works fine with IE for all file types( Even though he prompts twice to Open the file directly). but Netscape opens the file directly in the browser with showing any dialog box for text and html files. Anyone knows how to force the netscape in this case or for any file type? Any help will be appreciated.
Thanksany one has the solution for this issue ? I tried the search and I didnt find any answer.
when your trying to open a pdf file as attachment is seperate window, it works well in IE but in netscape it opens up in the same browser, it doesnt open a seperate window
res.setContentType( "application/pdf" );
res.setHeader("Content-Disposition","attachment; filename=\"" + cofcFileName+"\""); -
How to force the Netscape browser to use Java Plug-in 1.3.0_02?
For Analyzer 6.2.1, how to force the Netscape browser to use Java Plug-in 1.3.0_02?
Change the classid in the object tag here is some info.This applies to JRE's 1.3.1 and greater.How do I know what Class ID to use for a specific JRE?CAFEEFAC-0013-0001-0004-ABCDEFFEDCBACAFEEFAC = This tells the browser to force a specific JRE0013-0001-0004 = JRE version number 1.3.1_04 (1.3.1_08 would be 0013-0001-0008)ABCDEFFEDCBA = Just needs to be there.1.3.0_02 = E19F9331-3110-11d4-991C-005004D3B3DB, it seems like they did not implement the standard until v.1.3.1Any good JRE Version = 8AD9C840-044E-11D1-B3E9-00805F499D93, this class id will just look for any good JRE.http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/version.html
-
Client accessing a specific server under a vip ACE Module
Hi All,
I have a need to allow QA/developers to check updated appliactions on a particluar server.
Is there any way on an ACE blade to allow a client to access a particular server under a vip?
The ACE is configured in Routed mode and the version is A2.3.4.
Any help or pdf's would be much appreciated.
Thanks.
Jack.Hi,
Thanks for the response.
I have one more query, that I would appreciate some assistance with.
If I have an exisitng serverfarm with 6 rservers in it, is there any way to direct a specific client to a specific server.
I understand in one respect that if they are all inservice this may not be possible, but I thought I would ask the question anyway.
Thanks again for the assistance.
Jack -
How to access Hyper-V Client from Hyper-V Server to the new machines?
Hi
We have a small company in that we have 50 machines, i am having windows 2012 r2 server, i installed Hyper-V with that i have created virtual OS(winxp and win7) in the Hyper-V server. My question is how to access them in client Machines, Can Anybody help
me in this regards?
Regards
Meer Akbar AliHi Meer,
In addition , you need to use external virtual switch for these VMs that are used for RDP connection from clients .
Please refer to the article below for virtual network configuration :
http://technet.microsoft.com/en-us/library/cc732470(v=WS.10).aspx#BKMK_ConfigVN
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to Force the Display to be On? (W520, for Color Calibration Purpose)
Hi,
I am trying to get the color calibration to work on Linux on my W520 and the color detector seems to work with dispcalGUI. However, when I close the lid of the laptop, the LCD always turns off. I verified that it is not caused by either acpid or the thinkpad_acpi kernel module by unloading them. I cannot find a BIOS option for this either.
How can I force the display to stay on when I close the lid?
Thanks!
(I am using Gentoo x86_64 with kernel 3.2.12)Hi
Welcome to Lenovo Community
Have you installed the PM utilities
https://wiki.archlinux.org/index.php/Acpid#Tips_and_tricks
https://wiki.archlinux.org/index.php/Pm-utils
Hope This Helps
Cheers!!! -
My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
(I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
Any idea how to force Mac to join a specific AP?
Thanks,
adsoMy office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
(I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
Any idea how to force Mac to join a specific AP?
Thanks,
adso -
How to force the request to be ssl
Hi,
I have wls7.0 with plugin, and ssl is installed on web server, how can I enforce
the request be under ssl?
ThanksThe webserver might allow to specify which files can be accessed via which port.
This would depend on the webserver you are using.
You might want to crosspost this in weblogic.developer.interest.plugin group as
well.
Pavel.
"Jen" <[email protected]> wrote:
>
even I can enable the ssl on wls, but the request already been accepted
by web
server which could be in clear http, ideally I would like to specify
part of jsp/servlet
to use ssl on web server, how can I do that?
Thanks
"Pavel" <[email protected]> wrote:
Applications deployed on WLS can be configured in the descriptor touse
SSL.
See the description of the <transport-guarantee> tag here
http://e-docs.bea.com/wls/docs81/webapp/web_xml.html#1017885
In order to use this you'd need to enable WLS SSL port.
Pavel.
"jen" <[email protected]> wrote:
I have both 80 and 443 enabled on webserver, but didn't specify what
content to
use ssl. most of my content comes from wls, and some of them doesn't
need ssl
like faq stuff. and I don't have ssl on wls. In this situation, user
could come
to site either with or without ssl by calling the jsps. I would like
to force
the user to use ssl for part of my site, how can i do that?
Thanks
"Pavel" <[email protected]> wrote:
Requests to Weblogic SSL port should fail already unless they are
sent
over SSL.
I believe the SSL plugin also accepts SSL connections only. Or youare
asking
about your webserver configuration?
Pavel.
"jen" <[email protected]> wrote:
Hi,
I have wls7.0 with plugin, and ssl is installed on web server, how
can
I enforce
the request be under ssl?
Thanks -
How to force the user to enter a value in the prompt
Is there a way to force the user to enter a value in the prompt before they run the report?
We have a customer specific dashbaord. The user has to enter a customer number in Dashbaord prompt on a first page of the dashboard. We store that value in a presentation variable. That presenatation variable value is being referenced in all the other pages of the dashabord. If the user does not enter a values in the first page and directly navigates to the other pages on the dashbaord, the reports on the other pages start to run for all the customers. Is there a way to force the customer to enter a value in the prompt before running any of the reports on the dashboard?
Thanks!by Answer prompts, do you mean Column prompt?
I can not use Column prompt in this senario as the user should not have to enter the same customer number over and over again when he navigates from one page to another on the same dashboards. If there is a way to default the column prompts then this would be an acceptable solution.
I have already defaulted the prompt to a value as suggested in hte blog, but the issues occurs when the user erases the defaulted value. Is there are way to set the default value within the report?
Can you please explaing mroe about option 3 regarding Java Script. Also please let me know what other options there are so that I can check whether they will fit my needs.
Thank you very much! -
How to force the unlock screen Keyboard layout as default?
Hello BB Experts, is there a way to force the unlock screen keyboard layout as the default keyboard layout for everything in my Z30 (except the dial pad). I really love the unlock screen keyboard layout with the top numeric row. Thanks!
not that i know of, but it does pop up for password fields
-
How to force the scrollpane not wrap ?
Hi All,
I am creating Editor with JScrollPane.
The JScrollPane contains JTextPane(implements Scrollalbe, etc class) as a Viewport, and this JTextPane is being used rather than JTextArea to have some styles in it (color and fonts..)
My question is...
I am forcing the maximum size of the line by setting the PreferredSize of the JTextPane. However, when it reaches the end of the line, it automatically wraps to the next line. Is there any way to stop to go to next line ? Any ideas ?Read this sections from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html#document]Using Documents. It gives an example of limiting the total number of character to 300. This isn't exactly what you want but it should get you started.
Warning, this task is not as easy as you might think. Also you might want to consider using a JTextArea with a monospaced font. This will make it easier to size the components since it has a constructore that allows you to specify row/columns. -
MX 925 - how to force the printer to use paper from lower tray
Hi' there,
Several people seems to have the problem, that the printer "wants" to print from the upper tray, - I assume it's because it want's photo paper. Is it possible to FORCE the printer to use paper from the lower tray, when e.g. you have no photo paper, receive the error message, and just want to see the print?
:-) SoggeI found a methoid that while clumsy, works. I have defined another printer on my windows machine that points to the same
printer as my original printer defination. I have named this printer "Legal" and has defined legal paper as it's default. When
I print to this printer( DECTYPE, DECNAME) it now defaults to legal. -
Hi all,
We installed a new VEM module on the N1K. As we did not had enough installed licenses at this time, the vem took 2 overdraft licenses.
Now, another vem has been removed from the VSM and then, we recovered those 2 licenses from the removed Vem to the license-pool.
Is it a way to force the vem ( currently using the overdraft licenses) to use the 2 licenses from the pool without service disruption.
Thanks a lot.
Regards.
FrédéricHi Frédéric,
You could migrate the VMs off that host, do the license procedure, then move the VMs back.
Thanks,
Joe
Maybe you are looking for
-
How to find out what is slowing down your wireless speed
The first thing you need to do is when setting up your wireless internet is do it right from the beginning. For starters unplug and remove the batteries from all the cordless phones. If you have a wireless door bell or a repeater shut it off and unpl
-
Is it possibile to undo upgrade and go back to 5.0 on 3gs
I hate 6.0 I can slap att in the face because they have thier apn settings lock in like apple products does some items. Can I change back to 5.0?
-
Hey, My Webservice is <?xml version="1.0" encoding="utf-8"?> <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmln
-
I am running Linux 7.3 (I know just enough about Linux to get it installed and to get PHP up and running) and I would like to learn about JSP. My experience is 10 years with Object Pascal (Delphi) and I do have JBuilder, but have never used it. What
-
hi guys i have a nokia 5700 .. i tried to transfer image in a motorola L6 which has 2.7MB free and the image was 406KB but i can't transfer the image it says "sending failed" plz help me .. i can transfer document file but cant transfer the image fil