How to format the "Selected" portion of a button

I created a simple menu screen with 4 chapter buttons (a jpeg for each chapter) and I'm trying to format each one so that it is highlighted when selected. Problem is, the highlighted area is significantly larger than the jpeg it is supposed to cover and actually bleeds onto its neighboring buttons. When I try to size it down, the jpeg shrinks along with it! Also, there's a strange little line that appears at the bottom of each jpeg when selected (it looks like a thin button, but there is no way to delete it or format it either).
I tried going through the DVDSP manual & index but nothing seems applicable.
Is there a way to format the "highlight" on the menu button/jpeg so that it only covers the jpeg?
Thanks for any assistance!

The button areas will always be rectangular so there is a chance of overlap. One of the ways for the most control is to use an overlay and keep in mind how close the buttons will be so they do not overlap. For instance the highligh can be an arrow, or an arrow and text.
http://dvdstepbystep.com/newmap.php

Similar Messages

Wcf Data Service fails when more than 8properties in the 'select=' portion

Hi:
I am using WCF Data Service and Oracle
EF Provider is ODAC11.2 Release 4
Wcf Data Service fails when more than 8 properties are specified in the 'select=' portion of the URI
here is my code
var q = from c in this.ctx.SALESORDER_ITEM
select new
c.SORDERDETAILID,
c.IID,c.DMFLAG,c.OWNERID,c.SKUID,c.SKU_ID,c.TRADENO,c.SOURCEID,c.SORDERID
excetion:
InvalidOperationException: An error occurred for this query during batch execution. See the inner exception for details
The inner exception is null, but the DataServiceClientException states: Value cannot be null Parameter name: value
the exception is thrown in base.OnStartProcessingRequest(args) method (overridden).
Here is the call stack as well:
at System.Data.Services.WebUtil.CheckArgumentNull[T](T value, String parameterName)
at System.Data.Services.Internal.ProjectedWrapper.set_PropertyNameList(String value)
at lambda_method(Closure , Shaper )
at System.Data.Common.Internal.Materialization.Coordinator`1.ReadNextElement(Shaper shaper)
at System.Data.Common.Internal.Materialization.Shaper`1.SimpleEnumerator.MoveNext()
at System.Data.Services.Internal.ProjectedWrapper.EnumeratorWrapper.MoveNext()
at System.Data.Services.DataService`1.SerializeResponseBody(RequestDescription description, IDataService dataService)
at System.Data.Services.DataService`1.HandleNonBatchRequest(RequestDescription description)
at System.Data.Services.DataService`1.HandleRequest()
Is there a max number of properties in $select statement
I think may be it is oracle provider's problem ,but i don't konw how to debug it Can anyone help me
Any help is greatly appreciated

I believe the null/empty string issue is unrelated to the 8 column issue, at least for ODP.NET. For example, let's take the original query in the OBE:
http://.../yoursvcfile.svc/EMPLOYEES?$select=EMPLOYEE_ID,FIRST_NAME,LAST_NAME,SALARY,DEPARTMENT_ID,DEPARTMENT,EMAIL,PHONE_NUMBER,MANAGER_ID
Let's make all the columns selected not nullable. You can do this with the Oracle Dev Tools. Specifically, PHONE_NUMBER and FIRST_NAME are the only nullable fields. I make them non-nullable and re-run the query and the same error occurs. Thus, these values should never be made null. Moreover, in all 107 rows, none of these row values consist of empty strings anyway.
Looking into the problem further, WCF DS is calling methods in the System.Data.Services.Internal namespace.
http://msdn.microsoft.com/en-us/library/system.data.services.internal.aspx
Specifically, we see your issue when the ProjectedWrapperMany method is called. You will notice that there is ProjectedWrapper0, ProjectedWrapper1...ProjectedWrapper8 methods also present in the same namespace. As soon as the number of columns exceeds 8, ProjectedWrapperMany is called and we see the error. We're going to ask MS to help analyze the issue since this is an .NET-internal method being called.

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

How to get the selected values from the shuttle

Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanks

you can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil

How to Retrieve the Selected Values from selectOrderShuttle using ADF 11g

Hi Every One,
Does anyone has idea how to retrieve the selected Items using shuttle and Order of the items using 'SelectOrderShuttle' component ?
Thanks

shuttle's valuechangeevent would fire when you shuttle items back and forth.
    public void selectOrderShuttle1_valueChangeListener(ValueChangeEvent valueChangeEvent) {
        ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
        if (list != null){
            for (int i=0; i<list.size(); i++) {
                int l = list.size()-1;
                val = list.get(l).toString(); //returns , delimited string
                if (val != null){
                    val = val.replaceAll("[\\[\\]]", "");
                    StringTokenizer st = new StringTokenizer (val, ",");
                    int nto = st.countTokens ();
                    for (int j = 0; j < nto; j++)
                        String token = st.nextToken ();
            ..........

How to use the select option to get the multiple bom explosion

hi friends,
          i have completed the bom exp using parameters to get one material
input,but i need to adopt select option to give from and to materials
i ll gives from and to materials with description and bom deails
i here gave the coding also, pl give me a suggestion how to adpot the select
optoins instead of parameters ,very urgent
REPORT PP_BOM_EXPLOSION.
tables :mara,marc,stpo.
TYPE-POOLS : SLIS.
*parameters: p_werks like t001w-werks obligatory.
SELECT-OPTIONS : p_matnr FOR mara-matnr obligatory.
**select-options : p_matnr for mara-matnr obligatory.
PARAMETERS : P_WERKS LIKE T001W-WERKS OBLIGATORY,
        P_MATNR LIKE MARA-MATNR OBLIGATORY.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
matnr like mara-matnr,
maktl like makt-maktx,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data : topmat like cstmat.
data: w_topmat like cstmat.
DATA : IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
start-of-selection.
perform explode_assembly.
PERFORM BUILD_FIELDCATALOG.
PERFORM DATA_DISPLAY.
*end-of-selection.
*perform write_report.
*top-of-page.
*perform print_header.
*form print_header.
*write: /(18) 'Component'(h00),
*(40) 'Description'(h01),
*'Mat.Group'(h02),
*(18) 'Quantity'(h03).
*uline.
*endform.
*form write_report.
*write: / w_topmat-matnr under text-h00 color col_heading,
*w_topmat-maktx under text-h01 color col_heading.
*loop at it_comp.
*write: /
*it_comp-idnrk under text-h00,
*it_comp-ojtxp under text-h01,
*it_comp-matkl under text-h02,
*it_comp-menge unit it_comp-meins under text-h03,
*it_comp-meins.
*endloop.
*uline.
*endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
SELECT MATNR FROM MARA INTO CORRESPONDING FIELDS OF TABLE IT_MARA
                           WHERE MATNR IN P_MATNR.
Explode highest level:
*LOOP AT IT_MARA.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = P_MATNR
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
exit.
endif.
Don't process documents
delete it_stb where idnrk is initial.
Don't process valid from furure:
delete it_stb where datuv >= sy-datum.
Explode phantom assemblies up to last level
*do.
it_stb2[] = it_stb[].
*delete it_stb2 where dumps is initial.
*if it_stb2[] is initial.
*exit.
*endif.
*delete it_stb where not dumps is initial.
delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
loop at it_stb2.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
auskz = c_x
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = it_stb2-idnrk
werks = p_werks
tables
stb = it_stb3
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
*write: / w_msg.
else.
delete it_stb3 where idnrk is initial.
delete it_Stb3 where sobsl = 50.
loop at it_stb3 .
multiply it_stb3-menge by it_stb2-menge.
modify it_stb3 transporting menge.
endloop.
append lines of it_stb3 to it_stb.
endif.
*ENDLOOP.
endloop.
*enddo.
Build table of components collecting the same components from
all levels
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_OUTPUT'
    EXPORTING
    INPUT                = IT_STB-MEINS
    LANGUAGE             = SY-LANGU
    IMPORTING
LONG_TEXT            =
   OUTPUT               = IT_STB-MEINS
SHORT_TEXT           =
EXCEPTIONS
   UNIT_NOT_FOUND       = 1
   OTHERS               = 2
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
*READ TABLE IT_COMP INDEX 1.
*IF SY-SUBRC = 0.
IT_COMP-MATNR = w_topmat-matnr.
IT_COMP-MAKTL = w_topmat-maktx.
INSERT IT_COMP index 1.
*ENDIF.
ENDFORM.
FORM TO APPEND DATA INTO ALV FORM
FORM BUILD_FIELDCATALOG.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Component'.
*loop at it_comp.
   PERFORM BUILD_FIELDCAT USING 'MATNR' 'Material'.
PERFORM BUILD_FIELDCAT USING 'MAKTL' 'Material Description'.
PERFORM BUILD_FIELDCAT USING 'IDNRK' 'Component'.
PERFORM BUILD_FIELDCAT USING 'OJTXP' 'Description'.
PERFORM BUILD_FIELDCAT USING 'MATKL' 'Material Group'.
PERFORM BUILD_FIELDCAT USING 'MENGE' 'Quantity'.
PERFORM BUILD_FIELDCAT USING 'MEINS' 'Unit Of MEASUREMENT'.
*endloop.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
CLEAR WA_FIELDCAT_LN.
ADD 1 TO S_COL_POS.
WA_FIELDCAT_LN-REF_TABNAME = 'IT_COMP'.
WA_FIELDCAT_LN-FIELDNAME    = L_FIELDNAME.
WA_FIELDCAT_LN-SELTEXT_M    = S_TEXT.
WA_FIELDCAT_LN-COL_POS      = S_COL_POS.
WA_FIELDCAT_LN-QFIELDNAME   = SPACE.
WA_FIELDCAT_LN-HOTSPOT      = SPACE.
WA_FIELDCAT_LN-JUST         = 'R'.
APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM DATA_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = TEXT-001
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = IT_FIELDCAT
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_COMP
   EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
Thanks in advance
                                                                                Regards
senthilkumar D

tables :mara,marc,stpo.
parameters: p_werks like t001w-werks obligatory.
*p_matnr like mara-matnr obligatory.
*select-options : p_matnr for mara-matnr obligatory.
select-options : P_matnr for mara-matnr.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data: w_topmat like cstmat.
data : begin of itab occurs 0,
        matnr like mara-matnr,
        end of itab.
*data : itab type table of mara with header line.
start-of-selection.
perform explode_assembly.
end-of-selection.
perform write_report.
top-of-page.
perform print_header.
form print_header.
write: /(18) 'Component'(h00),
(40) 'Description'(h01),
'Mat.Group'(h02),
(18) 'Quantity'(h03).
uline.
endform.
form write_report.
write: / w_topmat-matnr under text-h00 color col_heading,
w_topmat-maktx under text-h01 color col_heading.
loop at it_comp.
write: /
it_comp-idnrk under text-h00,
it_comp-ojtxp under text-h01,
it_comp-matkl under text-h02,
it_comp-menge unit it_comp-meins under text-h03,
it_comp-meins.
endloop.
uline.
endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
select matnr from mara into table itab where matnr between p_matnr-low and p_matnr-high.
loop at p_matnr.
itab-matnr = p_matnr-low.
   append itab.
   itab-matnr = p_matnr-high.
   append itab.
   clear itab.
   endloop.
Explode highest level:
loop at itab.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = itab-matnr
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
exit.
*else.
endif.
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
endloop.
endform.
i got the low and high from selectoption and then move it into itab.
then i pass itab-matnr into fm. using loop.
but i got only one output
but ineet to got from and to output.
give me a solution
Regards
ds

How to delete the selected rows in a JTable on pressing a button?

How to delete the selected rows in a JTable on pressing a button?

You are right. I did the same.
Following is the code where some of them might find it useful in future.
jTable1.selectAll();
int[] array = jTable1.getSelectedRows();
for(int i=array.length-1;i>=0;i--)
DefaultTableModel model = (DefaultTableModel)jTable1.getModel();
model.removeRow(i);
}

How to get the selected rows & columns in the table?

hi everybody,
In my application the table is kept inside the event structure.I select the cells in the table (using mouse) on running time.How to get the selected number of rows & columns in that table?

Hello,
You can fill selected values of the table by writing to it or the corresponding property using a property node - the table is just a 2D array of strings. I think for your "disable" question you are referring to the shortcut menu (when you right click). If you are using LabVIEW 8.x, you can edit or disable that shortcut menu - just right click on your table at edit time and choose Advanced >> Run-Time Shortcut Menu.
Best Regards,
JLS
Best,
JLS
Sixclear

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to read the selected value of a dropdown list box

Hello,
I have 2 custom fields which are of type dropdown list on Accounts(CRMM_ACCOUNT) PCUI application details tab.I need to read the selected value of first dropdown list item,based on that second dropdown list will be populated.
I know where to populate the dropdown list box,it is in FILL_DROPDOWN_LISTBOX.
I dont know how to trap the selection made on dropdown list.
PLease guide me on how to trap the dropdown list field selection value.
Thanks in advance.
Thirumala.

Hello,
Check what is done in standard for the fielf REGION which is inked to the country.
Otherwise, you can do the following :
- in field group customizing, for field 1, flag the 'send request' flag. So, when you change the value in this field via the dropdown, the MAC methods are immediately called.
- Put the new value in a global variable (GV).
- in the fill_dropdown_listbox method, get the value from this GV and based on it, filter the values for the dropdown of field 2.
Hope this will help you,
Regards,
Frederic

How to get the selected value in SelectOneMenu in backing bean

Hello all,
I need your help. I want to have 2 select menus with the second menu's items list are populated based on the selection in the first menu. I don't know how to get the selected value in the backing bean so that I can based on that select menu to populate the second menu's item list. Basically I need to access to the UI Component of the first select Menu and retrieve its selected value.
Could you help me out?
Thank you very much in advance,
Lngo

Hi Lingo,
There r two ways of getting the values into the list. First one is hardcoding the values and the second one is use the list and get the values into the list by firing a query in the database.
Inorder to display the values in the second menu based on the first onces selection we need to add an attribute to the first selectonemenu known as valueChangeListener and we need to sumit the page.
Here is the sample code
<h:selectOneMenu id="catalogue"
                              binding="#{urbean.catalogue}" onchange="submit()"
                              valueChangeListener="#{urbean.categoryValueChange}"
                              <f:selectItem itemLabel="Select Catalogue" itemValue="" />
                              <f:selectItems value="#{urbean.catalogueList}" />
</h:selectOneMenu>
<h:selectOneMenu id="category"
                              binding="#{urbean.category}">     <f:selectItem itemLabel="Select Category" itemValue="" />
                              <f:selectItems value="#{urbean.categoryList}" />
                              <                         </h:selectOneMenu>
now in method called by valuechangelistener we need to write the similar code
public void categoryValueChange(ValueChangeEvent event) {
String rfnum = (String) event.getNewValue();
List categoryList = new ArrayList();
List tempList = new TablenameDAO().getActiveCatByCatalogueID(rfnum);
          for (int i = 0; i < tempList.size(); i++) {
               Tablename tablename = (Tablename ) tempList.get(i);
               String value = "" + tablename .getrfnum();
String label = tablename .getname();
     if (label == null) {
               label = "";
               SelectItem item = new SelectItem(value, label);
               categoryList.add(item);
          bean.setCategoryList(categoryList);
///getActiveCatByCatalogueID (rfnum) should bring the records which r based on the rfnum
if u follow this process i am damsure that u will get the values in to the secondlist based upon the first list
Thanks & Regards
Manidhar

How to get the selected cell in a Matrix.

Hi all,
Does any one know how to get the selected cell in a Matrix. Please help to answer. Thanks in advance.
Regards,
Thanh Tran

Hi,
You can get the value of every cell using UI API but using datasources is a better aproach.
Using UI API you need to know the event you want to catch. Example: Catching click event in itemcode column and getting the value (C#):Ki
      if ((pVal.EventType == BoEventTypes.et_CLICK) && //CLICK EVENT
          (pVal.ItemUID == "38") &&                                       //MATRIX-> ITEM 38
          (pVal.ColUID == "1") &&                                           //ITEMCODE COLUMN
          (!pVal.InnerEvent) &&
          (!pVal.BeforeAction))
                Form form = null;
                try
                    form = kernel.Application.Forms.Item(pVal.FormUID);
                    form.Freeze(true);
                    Matrix mtx = (form.Items.Item(pVal.ItemUID).Specific as Matrix); //MATRIX OBJECT
                    string itemCode = (mtx.Columns.Item("1").Cells.Item(pVal.Row).Specific as EditText).Value.Trim(); //itemcode = VALUE OF CELL. COLUMN "1": ITEMCODE COLUMN. CURRENT ROW: pVal.Row
                catch (Exception ex)
                    kernel.Application.MessageBox("Error " + ex.Message, 0, "", "", "");
                finally
                     if (form != null)
                        form.Freeze(false);
Kind regards,
Nauzet Díaz

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to Modify the Selection Screen in Report Painter

Hi All,
I am working on Report painter and writer,
can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport .
how can i add more select options to the exisiting one
please let me know the Procedure and provide some relevent documents .
Thanks and Best regards.
uma

Hello...
In the program ...we can find the following chunk of code..
selection-screen:begin of block B1 with frame title text-001.
Parameters : ....
select-options:.....
selection-screen:end of block b1.
if we need to add any more user inputs we can write the code inside the existing
selection screen....end of block .
or create a new block ..just the block name should be different...
if we are using select options...we need to declare the table name using the key word for the field on which we are giving select options ....
Tables : BSIK.
Please see the following code:
Imagine :- we have the current selection screen..
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR.
SELECTION-SCREEN END OF BLOCK B1.
we need to add 2 more fields on the selection screen ..this we can do as the following
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_BUKRS LIKE BSIK-BUKRS DEFAULT SPACE.
SELECT-OPTIONS: S_LIFNR FOR BSIK-LIFNR,
                S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE BSIK-BUDAT OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1.
OR...create a new block...
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS:   S_HKONT FOR BSIK-HKONT.
PARAMETER: P_DATE LIKE RFPDO-ALLGSTID OBLIGATORY DEFAULT
           SY-DATUM.
SELECTION-SCREEN END OF BLOCK B2.
there are many options available in selection screens..like creating check box,radio button etc..
for more info press F1 help on the Selection screen in the ABAP editor
Revert back if not clear and reward if helpful
Regards
Byju

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

How to format the "Selected" portion of a button

Similar Messages

Maybe you are looking for