How to Generate 997 for different trading partner with different Interchang

How to Generate 997 for different trading partner with different InterchangIDS
We are planning to use same working “ABC -> XYZ (Host)” 850 “ecs” file even for “EFG -> XYZ (Host)” 850 Transaction. And we have successfully implemented without any issues.
We wanted to send 997 Acknowledgement in case of “EFG -> XYZ (Host)” 850 transaction.
In this case also we would like to use same “ecs” file which has been used for “XYZ (Host) -> ABC”.
After adding the 997 capabilities to Stanley I don’t see any extra capability added to “XYZ (Host)” trading partner.
The generated 997 for Stanely EDI file doesn’t reflect the “XYZ (Host)” trading partner Interchange ID. It is getting reflected the previous 997 Transaction “XYZ (Host)” Intercahnge ID.
We use following Interchange ID’s
ABC = 005381447
XYZ (Host) = 049894764
EFZ = SWEOT30013
XYZ (Host) = 5273851T
The 997 which is generated has the InterchangeID as this “049894764” instead of “5273851T”
Regards
Ravi

Hi Ravi,
You have to have the two Delivery Channels under Host TP's communication capability. One host delivery channel should be used with one TP only and will have specific values to that TP.
Go to the Exchange Protocol Parameters of Host TP (XYZ) delivery channel (which you are using in the agreement with EFZ) and provide the required values here. Revalidate and redeploy the agreements and run a test. Let us know if you still face issue.
Regards,
Anuj

Similar Messages

How to generate datasource for inforsource in BW 7

Hi all:
Could you please tell me how to generate datasource for inforsource in BW7, it seems that the way
is different from other lower edition BW 3.x. Should I choose Tranformation ? and then how ?
Thank you very much!
Edited by: jingying Sony on May 9, 2009 8:41 AM

1) First thing is that in BI 7.x the infosource is optional.You can directly create a transformation between datasource and data target (e.g. cube). If you still want to use a infosource then you will require 2 transformations. 1 will act as a transfer rule and other one will act as a update rule. This is a crude example showing the comparision between 3.x and 7.x.
2) Infopackage in 7.x will load the data only till PSA. From PSA to data target you will need DTP. DTP will load data from PSA to data target. So you need to ensure you create a complete flow from datasource to data target and create infopackage & DTP.

How to generate sitemap for SiteStudio sites. Is there any component avai

How to generate sitemap for SiteStudio sites. Is there any component available?
We want to create xml having list of all site URLS for SEO purpose.
Is there any way to achieve this ?
Thanks

SiteStudio comes with SiteMap fragments. Change the page template so it is a document type XML, add the fragment and you're practiacally done.

CANNOT OVERRIDE DOCUMENT ROUTING ID FOR SPECIFIC TRADING PARTNER FOR ROSETT

Cannot override Document Routing ID for specific trading partner for RosettaNet transactions.
The Document Routing ID for other transactions types (e.g EDI) can be overridden when creating operation capability for a trading partner by unchecking "Use Existing Document Proto Parameter Values" and "Use Default Document Definition".
This does not work for RosettaNet transactions as no option to override the values is available when "Use Default Document Definition" is unchecked.

Hello,
I have replicated this issue and it appears to be a bug. I shall follow up regarding the same.
Rgds,Ramesh

User defined fields for the Trading partner agreements

Hi,
Do we have any provision to create custom/user defined fields for the Trading partner agreements ?

Hello,
It would be great if you can provide complete details of your use case. I can suggest the possible way of implementation only after understanding your requirement.
Regards,
Anuj

How to generate Billing for Service Order ?

how to generate Billing for Service Order ?

Hello,
You may do a resource related billing from the service order, but you need to maintain Resource Related billing profile in Service order --> Control tab. Once it is set you may generate the billing document (debit memo) from service order through DP90, provided the config is right.
Prase

How to generate Barcode for Storage Bins

Hi,
How to generate Barcode for the all the newly created storage bins in order to get scanned with the RF devices.
Thanks and regards,
I.Jacob Milton

Hello Jacob,
We generate our barcodes with the help of the PPF action. For example, our labels have the barcodes onto them and when we finish a task that requires packing/unpacking/deconsolidation we have the PPF trigger the printing of the neccesary labels.
I direct you to the path SCM SPRO - Supply Network Collaboration - Tools - Actions (Post Processing Framework). Here you need to set the action and namely the trigger.
All the best,
Claudiu Maxim

Validation Rule for making Trading Partner mandatory in FB50

Hi,
Validation Rule for making Trading Partner mandatory in FB50
I am trying to make trading field mandatory in FB50. If trading partner is not entered for the line items in FB50, User should get a error
I have tried the follwiong (at the Line Item level) and it does not work:
1)
Prerequiste:
Transaction code = 'FB50'
Check:
Trading Partner = ''
Message:
2)
Prerequiste:
SYST-TCODE = 'FB50'
Check:
Trading Partner = ''
Message:
Any ideas?

The message will only be issued when the result of the check is false. If you want to issue an error when a trading partner value is not entered, then your check needs to be Trading partner <> ''. If the user enters a Trading partner value, the check will be true and no message will be issued. If the user does not enter a Trading partner, the check will be false and the message will be issued.

How to generate report for Service sheet - ECC 6.0

Hi
Can anyone let me know regarding how to generate reports for service sheets entered
regards
Sanjay

Hi,
Get Service Entry Sheet with following T.codes:
1.MSRV6
2.ML84
Regards,
Biju K

How to generate client for GetFile service of Webcenter Content Management.

How to generate client for GetFile service of Webcenter Content Management.
Downloaded file : GetFile.wsdl
<?xml version="1.0" encoding="utf-8" ?>
- <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.stellent.com/GetFile/" targetNamespace="http://www.stellent.com/GetFile/" xmlns="http://schemas.xmlsoap.org/wsdl/">
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.stellent.com/GetFile/">
- <s:element name="GetFileByID">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByIDResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByIDResult" type="s0:GetFileByIDResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByIDResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:element name="GetFileByName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="revisionSelectionMethod" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByNameResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByNameResult" type="s0:GetFileByNameResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByNameResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:complexType name="FileInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocTitle" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAuthor" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dSecurityGroup" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAccount" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevClassID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevisionID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevLabel" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIsCheckedOut" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dCheckoutUser" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dCreateDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dInDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOutDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dStatus" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFlag1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dWebExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dProcessingState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dMessage" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition2" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIndexerState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dIsPrimary" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dIsWebFormat" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dLocation" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOriginalName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFormat" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFileSize" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="CustomDocMetaData" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
- <s:complexType name="StatusInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="statusCode" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="statusMessage" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcPropertyList">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="property" type="s0:IdcProperty" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcProperty">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="value" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcFile">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="fileName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="fileContent" type="s:base64Binary" />
</s:sequence>
</s:complexType>
</s:schema>
</types>
- <message name="GetFileByIDSoapIn">
<part name="parameters" element="s0:GetFileByID" />
</message>
- <message name="GetFileByIDSoapOut">
<part name="parameters" element="s0:GetFileByIDResponse" />
</message>
- <message name="GetFileByNameSoapIn">
<part name="parameters" element="s0:GetFileByName" />
</message>
- <message name="GetFileByNameSoapOut">
<part name="parameters" element="s0:GetFileByNameResponse" />
</message>
- <portType name="GetFileSoap">
- <operation name="GetFileByID">
<input message="s0:GetFileByIDSoapIn" />
<output message="s0:GetFileByIDSoapOut" />
</operation>
- <operation name="GetFileByName">
<input message="s0:GetFileByNameSoapIn" />
<output message="s0:GetFileByNameSoapOut" />
</operation>
</portType>
- <binding name="GetFileSoap" type="s0:GetFileSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <operation name="GetFileByID">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="GetFileByName">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="GetFile">
- <port name="GetFileSoap" binding="s0:GetFileSoap">
<soap:address location="http://localhost:7101/_dav/cs/idcplg" />
</port>
</service>
</definitions>

Hi,
I would suggest you to check the time recording functionality, see
details in:
http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/d5/299631364d4e959
c6609ca3bc24740/content.htm
Another possibility is configuring the Service Level Agreement, see
details in SDN blog:
Service Desk: SLA configuration hints
https://weblogs.sdn.sap.com/pub/wlg/24813
or
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/24813
Thanks
Regards,
Vikram

AIP-16076: A wallet password is required for hosted trading partner Oracle

Hi,
I have defined a agreement under "Custom Document over Generic Exchange" using File transport protocol.
I have configured host and remote tp delivery channels with following setup
i) Encryption Enabled
ii)Non-repudiation-origin enabled
iii)Non-repudiation-receipt enabled
I have created digital certificate using Oracle Wallet Manger application and saved them in B2B file system.
I have browsed and uploaded digital certificates to B2B during delivery channel creation.
After completing everything and when I validate the agreement, it throws following error
AIP-16076: A wallet password is required for hosted trading partner Oracle
Where I am doing wrong ?
Should I copy certificates to a specified path ?
Thanks
-Praveen

HI,
I got it now.
We have to set Host TP wallet password in General section Host TP B2B UI
Thanks

AIP-16076: A wallet password is required for hosted trading partner

Hi Please help me to resolve this issue.
B2B version: 10.1.2.2
OS: AIX 5.3
Error
Agreement XYZ is invalid.
AIP-16076: A wallet password is required for hosted trading partner ABC in agreement XYZ.
I did create the wallet, imported TD certificate and created wallet.txt and changed the "tip.properties"
Restarted B2B.
I did provide password 'welcome' when I create "Transport Servers". Is there any part I am missing. Please help with info to resolve this issue. It's bit important.
Thanks !
Rama K

Hi Guys,
Thanks for quick reply.
Here I am experiencing one more isssue. Please let me know, if you have quick ans for this issue.
<MSG_TEXT>Error -: AIP-51085: General failure encrypting S/MIME message: Error -: AIP-51091: Adding recipient to S/MIME message recipient list failed : Error -: AIP-51162: invalid asn.1 tag.
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createEncryptedMimeBodyPart(MimePackaging.java:513)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1697)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1165)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:701)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:832)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:531)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java(Compiled Code))
at java.lang.Thread.run(Thread.java:568)
Caused by: Error -: AIP-51091: Adding recipient to S/MIME message recipient list failed : Error -: AIP-51162: invalid asn.1 tag.
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.encrypt(SmimeSecureMessaging.java:1242)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createEncryptedMimeBodyPart(MimePackaging.java:485)
... 9 more
Caused by: Error -: AIP-51162: invalid asn.1 tag.
Thanks in Advance,
Rama K

How can I use different calendars associated with different emails to see appointments separately?

I have 3 emails accounts on my Blackberry curve. I want to use different calendars for different type of reminders/appointments. How can I do that? In calendar I pressed menu key and then clicked on select calendar, choose one email address (email 1) then entered an alarm but now if I go to a different calendar associated with different email ( email 2), it also shows me that alarm which I entered in email 1 calendar. Thanks for help

Don't have LV handy to open the old code, but I did read through the thread you referenced. It sounds like the example configured 2 counters to create the variable-freq finite pulse train and configured a 3rd counter to count the # steps generated as verification. That 3rd counter would be a problem for you as there is no internal timing signal connection between your 2 USB devices. You would need to run a physical wire connection and change some of the config code to match. Alternately, you could just delete all the code associated with the 3rd counter for now because it isn't strictly necessary.
Further advice/questions: Are you planning on a pure sine wave of frequency such that you oscillate with both positive and negative velocity (example: varying from -1000 to +1000 Hz clockwise)? Or is there a nominal average frequency with a small sine wave superimposed (example: nominal of 1000 Hz clockwise, variation of +/- 50 Hz)?
I *think* you may be dealing with more of a continuous pulsetrain situation, which is actually much simpler. You would only need 1 counter/timer, though you would still perform the freq changes in a timed loop which uses the pulsetrain as its timing source. You'd just need to keep track of your total elapsed time so you could figure out the right sinusoidal freq value at the moment you're ready to update it.
Another subtlety to watch out for if you're oscillating about 0 velocity -- don't try to create a frequency that is lower than the rate at which you need to update. Also, with steppers you may have mechanical stability issues at low freqs like 10's to low 100's of Hz. These kinds of things may need to be managed as special cases which force you to deviate from a "pure" sine wave.
-Kevin P.

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Need to monitor event ID with Event Level :Critical , Also how to generate (powershell or otherwise) an event with Event Level :Critical

Need to monitor event ID with Event Level :Critical , Also how to generate (powershell or otherwise) an event with Event Level :Critical

Hi
First, we Need to clarify what do you want.
1) You want to Monitor a Windows Event with the severity "Error" (there is no Critical for Windows Events, only Error").
2) You want to create an Event in SCOM. I think you if you talk about "Event" in SCOM you mean actually an Alert.
There is no direct way like a tool/powershell script of only creating an Alert in SCOM only if you are going to use the SCOM SDK
http://msdn.microsoft.com/en-us/library/hh329086.aspx or using the Orchestrator Create Alert activity.
If you want to create a SCOM alert depending on a Windows Event you either can create a rule
http://technet.microsoft.com/en-us/library/ff730470.aspx or a Monitor
http://jimmoldenhauer.blogspot.ch/2013/03/scom-2012-how-to-generate-alerts-from.html
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

How to Generate 997 for different trading partner with different Interchang

Similar Messages

Maybe you are looking for