How to generate an executable with lvclasses?

Probably there's a simple detail I've missed, but I can't understand what...
I developed my first project using LabVIEW classes, and It works fine into development system.
When I tried to build the EXE I found the VIs with the class functions in the executable folder. But I don't want to include these "source" files into the EXE directory.
If I build the EXE of the Board Testing shipped example I have the same problem (see attached).
How can I generate an EXE without these VIs in the output folder?
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded
Attachments:
Cap1.png ‏35 KB

The current solution, as has already been hinted at, is to put the class files into a separate LLB (you can rename this to be .DLL if you want to be *really* sneaky):
1. In the Destinations options create an LLB destination for each of your classes
2. In the Source File Settings options, set the destination of each class to be your newly created destination instead of "same as caller"
(see attached screenshots)
Shaun
Message Edited by shew82 on 05-19-2009 09:37 AM
Attachments:
Create Destinations.png ‏30 KB
Set Destinations.png ‏34 KB

Similar Messages

How to generate random numbers with a known distribution of f(X)=(8X^2 + 1)*Exp( -X^2 )

Dear All,
I need to simulate a random number generator which can generate numbers X with the probability distribution of
f (X) = ( 8X^2 + 1)*Exp ( -X^2 ).
This distribution is not a common distribution.
I have searched a lot, but I still do not know how to realize it.
Any help on this topic would be highly appreciated.

Make a lookup table of the integral of your function (normalized to 1)
Use the rectangle random generator and pipe that value through the lookup table, scale it ... voila.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

How to generate random numbers with a known distribution f(X)=(8X^2 + 1)*Exp( -X^2 ).

I need to simulate a random number generator which can generate numbers X with the probability distribution of
f (X) = ( 8X^2 + 1)*Exp ( -X^2 ).
This distribution is not a common distribution.
I have searched a lot, but I still do not know how to realize it.
Thanks a lot!
Solved!
Go to Solution.

Don't forget to index back into the original X array for correctly scaled data. Here's a simple example (LV 8.0):
Seems to work just fine.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DistributionSimulation.png ‏25 KB
DistributionSim4.vi ‏44 KB

How to Generate sales orders with custom Fields using BAPI_BUSPROCESSND_CREATEMULTI

Hi,
I need to generate sales orders with custom fields on table CRMD_ORDERADM_H using BAPI_BUSPROCESSND_CREATEMULTI, after changing the structure BAPI_TE_CRMD_ORDERADM_H, and feed the EXTENSIONIN table of the BAPI with data, the order is created, but any value on custom fields.
After debuging, I saw that the BAPI search for structure conversion in table CRMC_OBJECTS_GEN, but we haven't entry with BAPI_TE_CRMD_ORDERADM_H in this table. is that the problem ?, Is there any way to fix it?
Best Regards,
Salah.

That depends on where do you have the customer fields, check the table CRMD_CUSTOMER_H, if your custom fields are there, you need to use the changing parameter CUSTOMER_HEAD, I guess your already checked that one, right? but there's no custom fields, well...AET/EEWB doesn't enhance the strcuture of the BAPI, so you should do it manually, check the note following note for further details.
988410 - FAQ: User-defined fields in the BAPI
If you don't have access to the SAP Marketplace, in resume you should create an append on the structure BAPIBUS20001_CUSTOMER_H and include the following strcutrue CI_EEW_CUSTOMER_H
Cheers!
Luis

How to generate complex reports with JHeadStart?

I have data from a DataSourceSet process in the infoTable (I use BC4J 9.0.3.10.7, JHeadStart 9.0.3.58, Oracle MVC R.Candidate 2.0, UIX 2.1.9).I need to generate a report with this data in a UIX Table. Actually, I show the data as retrieved from the ViewObject(Whole query in a table). One of the columns has Numbers and I add them at the bottom row with a GetTotalsRow process.
Now I need to have subtotals in the same table as if I do a GROUP BY but without modifying the query (I have to do this using data stored in infoTable). I also have to add complex calculations for each row.
Any idea?
PD: I'm thinking in reading data from infoTable and in a custom process create DataObjectList with all details.
is it a good approach?
is there something better?

Ariel,
I think I already answered this question on the internal mailing list. Is this correct?
If you are an Oracle employee, please use the internal mailing list.
Thanks,
Steven Davelaar.
JHeadstart team.

How to generate a sinewave with at-mio-16de

I have an at-mio-16de Daq card. I want to generate a sine wave on the analog o/p. I believe that I would use the WFM_load function. I do not understand 1) how to load a buffer for this function and 2) what mode I am supposed to use. The modes in the help file all say the description is for the DAQArb 5411. I am using visual basic for my app.

There are a number of examples which ship with the NI-DAQ driver which perform an analog output using the WFM commands. If you installed support for Visual C or Visual Basic when you installed the NI-DAQ driver you will find examples in the \Program Files\National Instruments\NI-DAQ\Examples directory. You didn't mention what language you were using; however, if you look in the VisualC\ao subdirectory you will find manu examples which demonstrate generating a waveform from your device. Use these examples in conjunction with the NI-DAQ Function Reference Manual, which can be downloaded from http://www.ni.com/manuals, and you will be able to better understand what is happening in these examples.
Regards,
Justin Britten

How to generate a report with more than one elements in the same graph??

I need to generate a custom report in OEM GC 10g featuring volume total capacity information and volume free capacity information both in the same graph on (Y-axis) and time on the (X-axis). I could generate only the total volume capacity graph individually, but how can the combined graph and the graph for free capacity be generated...

Is it your values in parameter NO separated by coma? And is it
parameter in where clause?
Do you want something like :
from table
where s_no in (NO) ?
If is answer "yes" you can create lexical parameter in report.
You can write in report sowething like:
select a.field1, a.field2,.....
from table a
&COND /* this is if is condition only one line after "from".
if you have more lien after where then you will put this &COND
in line where you want to have your multivalue.
Then in your trigger in form you should write:
sc_no := 'where a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
/* again this is if you have only one line with WHERE ili
conditions */
or you will write:
sc_no := 'and a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
It will substitute line in which is your conditions with
multivalue.

How to generate custom report with PDF output?(Payables)

Hi All,
we are using some custom reports in payables modual production server the reports are working fine .
my question is i need creat same reports in test server i have done following activities.
1. copied rdf file from prod server and pasted into test server
2.given excutable name in system administrator modual(concurrent-progrem-excutable)
3.define report in system administrator modual(cocurrent-program-define) output selected PDF and given parameters.
4. switch to payables moduale run the report ,following error showing in log file plese help how to resolve it we don,t have any custom reports in test server this is first time to creat the report.
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/APPS/dkvuatora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /APPS/dkvuatora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 2707514
X connection to oraclefinof1:0.0 broken (explicit kill or server shutdown).
Report Builder: Release 6.0.8.25.0 - Production on Wed Nov 18 16:06:17 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 339487.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 19-NOV-2009 16:24:52
---------------------------------------------------------------------------

Hello.
Have a look to Metalink Doc ID 252715.1
You have to login to server and issue the 'xhost +' command.
Hope this helps.
Octavio

How to generate a pulse with 9472?

I am trying to generate a single 8V pulse of 10ms duration on multiple channels of the 9472. The 9472 is in slot 4 of the 9172 compact daq chassis. To test my results, I have connected an oscilloscope to one channel of the 9472 (with no load attached). I tried modifying the Create Digital Waveform VI from the Write Dig Chan-Ext Clk example VI. In doing so, I generated a binary array with the first half of the array filled with all 0's and the second half of the array filled with all 1's. When I triggered my O'scope on a rising edge, I saw the channel turn on (also the LED was lit on the 9472). However, the channel stayed on even after the routine had completed (LEDs were lit solid). So to try to turn the channel off, I appended one 0 to the end of my array. Now the O'scope won't trigger and I see no sign of the LEDs on the 9472 blinking. Any ideas how I can solve this problem?
I was able to get a single pulse of the proper duration by setting up a task in MAX with the 9472 in slot 5. But in doing so, I was only able to generate the pulse on one channel. I need to be able to parallel multiple channels for my application.

I am trying to generate a single 8V pulse of 10ms duration on multiple channels of the 9472. The 9472 is in slot 4 of the 9172 compact daq chassis. To test my results, I have connected an oscilloscope to one channel of the 9472 (with no load attached). I tried modifying the Create Digital Waveform VI from the Write Dig Chan-Ext Clk example VI. In doing so, I generated a binary array with the first half of the array filled with all 0's and the second half of the array filled with all 1's. When I triggered my O'scope on a rising edge, I saw the channel turn on (also the LED was lit on the 9472). However, the channel stayed on even after the routine had completed (LEDs were lit solid). So to try to turn the channel off, I appended one 0 to the end of my array. Now the O'scope won't trigger and I see no sign of the LEDs on the 9472 blinking. Any ideas how I can solve this problem?
I was able to get a single pulse of the proper duration by setting up a task in MAX with the 9472 in slot 5. But in doing so, I was only able to generate the pulse on one channel. I need to be able to parallel multiple channels for my application.

How to generate a report with Courrier font and no horizontal lines?

Hi guys,
In a wizard-generated report, I want to accomplish the following things.
1. Print table data (I'm only printing one column) in a non-proportional font (e.g. Courrier).
2. Suppress the vertical lines that Apex automatically puts in between each record.
How can these two things be accomplished?
Thanks,
Kim
P.S. I'm running Apex 4.1.

Fair enough. I'll try to be more specific. Assume you're running a query from SQL Developer on a single column from a single table. In the table, the data is already formatted to be displayed using a non-proportional font (old-time religion here). SQL Developer will show the contents of the column formatted exactly like the author intended (non-proportional font and no "helpful" horizontal lines between the rows). That's exactly what I want Apex to do. In the rectangular area that Apex creates for the report contents display, I want Apex to show the rows from that table in a non-proportional font with no horizontal lines between the rows. The report query will be just about as simple as possible (i.e. select col1 from tab1 order by col 2). How should I go about achieving this result?
Thank you so much!

How to generate printed document with "continuous" section breaks versus "next page" section breaks?

When generating a Word or PDF document from the HTML help files a "next page" section break is used after each topic. How can I get a "continuous" section break instead?

I've been poking around a bit more. Here's the deal.
New chapters will always start on a new page and have a next or odd page break according to the Start New Chapters setting. If ticked it will be an Odd Page break, else a Next Page break.
Topics within a book will follow the Start Each Topic on a New Page setting. If ticked, each topic will be separated by a page break, not a section break. Else they will be on the same page with no breaks of any type.
Topics not within a book will be followed by a section break.
So section breaks are only created for chapters and topics not in a chapter.
Hope that helps. Please post back if you find otherwise.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to generate SWF file with dynamic data but no live connection

Hello,
We got a requirement where we have to email out SWF file either in PPT or outlook generated from BOBJ universe. When the file reaches the customer who would be outside our network with no access to our servers or data should be able to view the swf file with data. So the goal is to generate these files automatically and should not prompt for BOBJ login or wouldn't have ability to query the database but need to report data pertaining to the customer.
Any help in this regards is greatly appreciated.
Thanks
Manohar

Hi Manohar,
You can use QAAWS(query as a web services) and build your queries on universe.
You get an option of hardcoding the user id and password in the data connection for QAAWS which will not asks the users for login credentials.
This will hepl the user to veiw the latest data from the database and the user wont be asked for login too.
Thanks,
Amit.

How to generate a view with dynamic name?

I want to generate a view from several tables;
create view sample as select * from book1;
But I hope to create a serial views in my program,that is "sample" maybe "sample20010401" and "sample200010501" ect.If I define a variable,how to pass the value to the view?
Any words are help to me?thanks.
[email protected]
null

Use dynamic SQL
null

How to generate xml file with multiple nodes using sqlserver as database in SSIS..

Hi ,
I have to generate the xml file using multiple nodes by using ssis and database is sqlserver.
Can some one guide me on to perform this task using script task?
sudha

Why not use T-SQL for generating XML? You can use FOR XML for that
http://visakhm.blogspot.in/2014/05/t-sql-tips-fun-with-for-xml-path.html
http://visakhm.blogspot.in/2013/12/generating-nested-xml-structures-with.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to generate a WSDL with XMLBEANS?

Hello everyone
I have a below WSDL file to parse,in which includes "xmlns:plnk" elements.
Casses generated with WSDL schema don't include any method to do with plnk elements,just like partnerLinkType element.SO what I have to do when I have to parse partnerLinkType ?
The only way is "XPATH"?
Are there any good tips?
Thank you very much
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://samples.xhalibut.com/CurrencyConverter/wsdl/"
          xmlns:tns="http://samples.xhalibut.com/CurrencyConverter/wsdl/"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
          xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
     xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
     xmlns:ejbcc="http://samples.xhalibut.com/CurrencyConverter/EjbBinding/">
     <wsdl:message name="convertInput">
          <wsdl:part name="from" type="xsd:string"/>
          <wsdl:part name="to" type="xsd:string"/>
          <wsdl:part name="amount" type="xsd:double"/>
     </wsdl:message>
     <wsdl:message name="convertOutput">
          <wsdl:part name="convertReturn" type="xsd:double"/>
     </wsdl:message>
     <wsdl:portType name="CurrencyConverterSoapPortType">
          <wsdl:operation name="convert">
               <wsdl:input message="tns:convertInput"/>
               <wsdl:output message="tns:convertOutput"/>
          </wsdl:operation>
     </wsdl:portType>
     <plnk:partnerLinkType name="CurrencyConverterSoapType">
          <plnk:role name="Service">
               <plnk:portType name="tns:CurrencyConverterSoapPortType"/>
          </plnk:role>
     </plnk:partnerLinkType>
     <plnk:partnerLinkType name="CurrencyConverterEjbType">
          <plnk:role name="Service">
               <plnk:portType name="ejbcc:CurrencyConverterEjbPortType"/>
          </plnk:role>
     </plnk:partnerLinkType>
     <bpws:property type="xsd:short" name="hiProperty"/>
     <bpws:propertyAlias messageType="ejbcc:amountOutput"
propertyName="tns:hiProperty" part="amountOut"/>
</wsdl:definitions>
Java Tutorial

use the xrpcc tool
http://java.sun.com/webservices/docs/1.0/tutorial/doc/JAXRPCxrpcc.html

How to generate an executable with lvclasses?

Similar Messages

Maybe you are looking for