How to generate BP number for the employee (ECC to CRM) ...
Hi all,
can any one give solution for ,how to generate BP number for the employee from ECC to CRM other than active status,as i downloaded employee data from ECC to CRM through ALE/IDOC,as only active employment status employees are got BP number generated,remaining also transfered to CRM but BP number is not generated for those employees,these employee records i can able to see in the HRP5580- HRP5587 tables.
thanks in advance.
vamshi.
Message was edited by:
vamshidher rao
Hi,
Or are you looking for this:
SELECT serial_number, paaf.assignment_number
FROM pay_assignment_actions paa, per_all_assignments_f paaf
WHERE action_status = 'C'
AND paaf.assignment_id = paa.assignment_id
AND serial_number IS NOT NULL
AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
- Viky
Edited by: Viky on Dec 17, 2010 11:42 AM
Similar Messages
-
How to get check number for the employee's paycheck
Hello
Anyone can advise on how to get the check number for an employee's pacheck
I got employee first name,last name,GROSS salary,Tax Info,and NET salary.I need the CHECK NUMBER.
please advise
thanks
kp
Edited by: user8612301 on Dec 16, 2010 1:26 PMHi,
Or are you looking for this:
SELECT serial_number, paaf.assignment_number
FROM pay_assignment_actions paa, per_all_assignments_f paaf
WHERE action_status = 'C'
AND paaf.assignment_id = paa.assignment_id
AND serial_number IS NOT NULL
AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
- Viky
Edited by: Viky on Dec 17, 2010 11:42 AM -
10g express, how to change port number for the database home page
10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jlAndy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl -
How to generat sequence number for db in XSLT
Hello SOA Gurus,
I have a requirement, Please see below
I am using SOA 11.1.1.6
From a webservice call to db insert XSLT, i have 10 elements at source side and 11 elements at target side.
From source to target first 10 mappings are done.
Now requirement is, for the 11th element in target- we need pass a sequence number to the targeted database, means---(sequence number has to be generated for every execution of XSLT execution)
How to do the last point???
Can anyone help me plzzHi,
You can pass the sequence number in the 11th element using "oraext:sequence-next-val("Sequence name as a string", "Datasource as a string") function.
Regards,
Anshul -
How to activate delta download for BP from ECC to CRM
Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.gHi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b> -
How to find BPs marked for deletion in ECC at CRM side ?
Hi team,
We had a custom search FM in which we will fetch data from CRM mastertables passing id/name/ contact details etc. I used a view 'bbpv_buyer_addr' with which i was succesfully able to get the result.
Now a new change is suggested that, if the BP is marked for deletion at ecc side, then this should not get picked up in the above mentioned search. So can any1 tell me where is this mark for deletion field/flag set in CRM ? i mean which table or view?
These are the inputs i am getting for this search - bpid/ last name/ country/ state/ zipcode/ city/ street/ county.Hi team,
We had a custom search FM in which we will fetch data from CRM mastertables passing id/name/ contact details etc. I used a view 'bbpv_buyer_addr' with which i was succesfully able to get the result.
Now a new change is suggested that, if the BP is marked for deletion at ecc side, then this should not get picked up in the above mentioned search. So can any1 tell me where is this mark for deletion field/flag set in CRM ? i mean which table or view?
These are the inputs i am getting for this search - bpid/ last name/ country/ state/ zipcode/ city/ street/ county. -
What is the phone number for the Employee Phone Program support?
My son's HTC Thunderbolt is no longer holding a charge; the green indicator light is on,however, when he unplugs the charger it turns red. I need to call employee support to see what I need to do. Help Please!
It sounds as if you need customer support, not employee support. *611 from your cellular phone. They will be able to either help you with a solution or send you a replacement if it is still under warranty and doesn't have any physical damage.
-
How to generate the request number for the changed script
Hi guys
I am having a reqirement, to modify the script which was already transported to production server. I changed the script, but while saving it is not asking any request number.
On which request number it is getting saved?
Or is there any methods to generate the <b>request number for the changed script</b>
Kindly suggest me the procedure with step by step operation.Goto Se03 Transaction :
select change object directy entries ->execute->select one empty check box ->FORM-> your form name -Execute-> -
How to generate a number sequence for a column of a Z*table?
Hi ,
How to generate a number sequence for a column of a Z*table?
plz guide me.
thanks
Albert1) Use SNRO for defining a number range.
2) Use FM NUMBER_GET_NEXT for getting the next number with object, sub object etc..
See one example below.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = c_01
object = c_z_prd_code
* QUANTITY = '1'
subobject = p_vkorg
* TOYEAR = '0000'
* IGNORE_BUFFER = ' '
IMPORTING
number = in_prd_code
* QUANTITY =
* RETURNCODE =
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8
3) You may write these code in main program of the table maintinence
rgds,
TM. -
My ipod touch was stolen and I need the serial number for the police report how can i recover it
my ipod touch was stolen and i need the serial number for the police report how can i get that
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
-
I recently subscribed to Acrobat XI after the trial expired but when I went to activate it I was asked for the serial number. I only have the order number on the invoice. How do I get the serial number for the trial software that is on my computer?
Please do not try to send attachments in mail responses to forum messages. Please return to the forum and click Reply. You can then use the CAMERA icon to add your pictures. Looking forward to seeing what is wrong with your license screens - the general advice is simply to sign in, and everything is done. Make sure you use the SAME Adobe ID that you used to purchase, and check your account details to be sure the subscription is active.
-
I downloaded a Trial version of Adobe Acrobat XI. Now the trial has runout and I've signed up for a subscription. However, my software still needs a serial number. How can I get a serial number for the installed software?
There is no serial number and you don't need one. What you need for a subscription is to SIGN IN within Acrobat, so it knows the subscriptions you own.
-
How to get a week number for the year using oracle sql query?
hi everyone,
i have the requirement to find the week number for the calender..
so that week number should start with 01 when the year starts and it should end with week end date(that is first saturday of the january month).. so next week number starts with sunday and ends with saturday ,continously.. in the end date of the year it should not be 'saturday' but week number should end with last date of the year.. again in the next year it should start with '01'.
for example:
01-JAN-13 tuesday 01
02-JAN-13 wednesday 01
03-JAN-13 thursday 01
04-JAN-13 friday 01
05-JAN-13 saturday 01
06-JAN-13 sunday 02
07-JAN-13 monday 02
26-DEC-13 thursday 52
27-DEC-13 friday 52
28-DEC-13 saturday 52
29-DEC-13 sunday 53
30-DEC-13 monday 53
31-DEC-13 tuesday 53
01-JAN-14 wednesday 01
02-JAN-14 thursday 01
how can i achieve this, can anyone please help me out on this..
i have a query that starts with 01 when year starts but it gives problem in the end of the year .. described below with a query..
select mydate,
to_char(mydate,'day') as weekday,
to_char(next_day(mydate,'sunday'),'iw') as week_num
FROM ( SELECT TRUNC (SYSDATE, 'yy') - 1 + LEVEL AS mydate
FROM dual
CONNECT BY LEVEL <= (SELECT TRUNC (ADD_MONTHS (SYSDATE, 24), 'yy')
- TRUNC (SYSDATE, 'yy')
FROM DUAL))
this query gives date, weekday and week_num for 2 years 2013 and 2014,
when i run this query ,at the end of the 2013 it gives the result as,
26-DEC-13 thursday 52
27-DEC-13 friday 52
28-DEC-13 saturday 52
29-DEC-13 sunday 01
30-DEC-13 monday 01
31-DEC-13 tuesday 01
01-JAN-14 wednesday 01
02-JAN-14 thursday 01
for dates 29 ,30,31st it should give 53 .. how can i achieve that using this this query .. can any one help me out on this please...
thanks,
pradeepI tried with the IW ...
it is giving week_id for the year.
select
mydate,
to_char(mydate,'day'),
case when mydate between trunc(mydate,'yyyy') and next_day(trunc(mydate,'yyyy'),'saturday')
then to_number(to_char(mydate,'yyyy')||to_char(trunc(mydate,'yyyy'),'iw'))
when mydate between next_day(trunc(mydate,'yyyy'),'saturday') and trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d')-1
then to_number(to_char(mydate,'yyyy')||to_char(next_day(mydate,'sunday'),'iw'))
when mydate between trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d') and add_months(trunc(mydate,'yyyy'),12)-1
then to_number(to_char(mydate,'yyyy')||to_char(trunc(add_months(trunc(mydate,'yyyy'),12)-1,'d')-1,'iw')+1) end as WEEK_ID
FROM ( SELECT TRUNC (SYSDATE, 'yy') - 1 + LEVEL AS mydate
FROM dual
CONNECT BY LEVEL <= (SELECT TRUNC (ADD_MONTHS (SYSDATE, 24), 'yy')
- TRUNC (SYSDATE, 'yy')
FROM DUAL
)) -
How to track the transport request number for the Role/Composit Role
Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
RaviUse transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards -
How to crate a spool number for the abap program
hi
how to create a spool number for the abap programHi,
Check this thread
how to create a spool requset for 'z program'.
Regards,
Satish
Maybe you are looking for
-
HP Photosmart c309a no longer printing and drivers not available
My HP Photosmart c309a printer which previously worked successfully printing wirelessly suddenly stopped longer working and showed as Offline and the dirvers do not seem to be available for my Macbook Air. I have set the printer back to default sett
-
What is a USB2 port and where do I find it?
Have been trying to undertake a full backup but it is taking hours. Computer says use a USB2 port but I don't know what this is or where to find it. Help please.
-
Hi all, How can i create dual language smartform ie. i need to print text in two different languages in the smartform eg. Sold to / Vendu ( English / French). Please explain it elaborately. Thanks , Sushant Singh.
-
Thank you, solved.... Pascal Edited by: Pascal Schmidt-Volkmar on Sep 4, 2008 3:58 PM
-
I'm new to Livetype and i have several fonts listed in the Font tab, the preview text for which looks blocky and pixelated. Examples are ceriph, copy, header, and some others. They all have numbers after the name like 8_65, 8_66, 17_67, etc. What's w