How to get a logo dynamically in template

Hi there
i am developing reports to various clients . At run time i have display the logo of the appropriate bank to whom i will be selling the product . since i am developing nearly 100 reports , i want to include this in the template . I ahve tried using the link field , but i have to hardcode the path .... is there any other option ...
any suggestion are welcome ...
thanks
sudhir

Hi
place all the three logos on the smartfrom.
Suppose u have three business areas,
1
2
3
then in the condition part of the graphics,
provide the condition.
like field name eq business area
relation Equal to
Comaprison value eq 1.
when this conditon will satisfy then only ur logo will print.
apply this condition to all three logos.
Hope this will solve ur problem.

Similar Messages

How to get the line in the template (smartform) with out using under score

Hi,
     How to get the line in the template (smartform) with out using under score,
     and how to print the box (line the check box - small squre box (which is used ot mark the tick by the user in front of the item).
     Please provide the valueble answer as early as possible.
Thanks,
Ravi

Hi Ravi,
Line -
Use a SMATSTYLE for this purpose.in the smartstyle create a paragraph or character with underline atribute.Then call the smartstyle in the text.
Search SDN with Key <b>UNDERSCORE</b>.. will get few more posts on the same.
For Checkbox - refer link
Re: Quick Question on Smartforms
Re: putting tick mark into check box in smartform
Reward points if this Helps.
Manish
Message was edited by:
        Manish Kumar

How to get audit id in coder template mapping

Hello everybody,
i am new in this Forum and new to the Oracle Warehouse Builder. I am Student and currently working on a approach of error handling by ETL processes.
To my question:
I am using a Code Template Mapping to load data in my target tables. In my target table i want to have a column which contains the Execution_Audit_Id of the current Code Template run. Can anyone tell me how i get this Audit ID in a Code Template Mapping? That would be great!
OWB Version 11.2
Regards,
Jens

Hi,
You would need to create a parameter in your report called userloginid select the paramter data type to match that of the datatype this value is stored as in the table.
then the correct syntax would be select * from table1 where userloginid=:userloginid
Hope this helps,
Domnic

How to diaplay a logo dynamically in smartforms

hi experts,
i have 3 logos which needs to get printed in the smartform based on the business areas as the condition
can you please help me in providing a sample code to display the logo dynamically in smartform
Edited by: murari sampath kumar on Jan 28, 2010 7:42 AM

Hi
place all the three logos on the smartfrom.
Suppose u have three business areas,
1
2
3
then in the condition part of the graphics,
provide the condition.
like field name eq business area
relation Equal to
Comaprison value eq 1.
when this conditon will satisfy then only ur logo will print.
apply this condition to all three logos.
Hope this will solve ur problem.

How to get my logo to appear in the URL box?

If you ever notice when you go on websites like facebook or myspace or even apple's website you always see their logo right before the URL address in the box at the top of the page. How do you get the logo there? My logo is all over my site but can't seem to figure out how to put it there.

As Wyodor has pointed out, only one site can use CNAME forwarding and use favicon just by placing the file in the root of the server. If you have multiple domain names or sites you can add a favicon to those sites, with or without a domain name.
Just add the following code in an HTML snippet to each page:
<script type="text/javascript">
var head = parent.document.getElementsByTagName("head")[0];
var favicon = parent.document.createElement("link");
favicon.rel = ("shortcut icon");
favicon.href = ("URL TO IMAGE USED FOR FAVICON");
head.appendChild(favicon);
</script>
With this method the file name can be anything you'd like and the format can be either gif, png or ico. If you place the file in your iDisk/Web/Site folder the url to use would be:
http://web.me.com/MMeUsername/FileName
OT

How to get a LOGO in a classical report?

please say me how to put a logo in a classical report?

Prakash,
IT IS POSSIBL USING OOPS CONCEPT GO FOR THIS CODE:--
REPORT y_pic_show .
DATA:
docking TYPE REF TO cl_gui_docking_container,
picture_control_1 TYPE REF TO cl_gui_picture,
url(256) TYPE c .
DATA : sum(4) , num1(4) , num2(4).
PARAMETERS: p_dummy(4) DEFAULT '4' .
PARAMETERS: p_dummy1(4) DEFAULT '5' .
AT SELECTION-SCREEN OUTPUT.
PERFORM show_pic.
START-OF-SELECTION.
num1 = p_dummy.
num2 = p_dummy1.
sum = num1 + num2.
WRITE : / sum.
*& Form show_pic
FORM show_pic.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CREATE OBJECT picture_control_1 EXPORTING parent = docking.
CHECK sy-subrc = 0.
CALL METHOD picture_control_1->set_3d_border
EXPORTING
border = 5.
CALL METHOD picture_control_1->set_display_mode
EXPORTING
display_mode = cl_gui_picture=>display_mode_stretch.
CALL METHOD picture_control_1->set_position
EXPORTING
height = 150
left = 700
top = 10
width = 138.
CALL METHOD picture_control_1->load_picture_from_url
EXPORTING
url = 'PIX PATHNAME'.
IF sy-subrc NE 0.
Fehlerbehandlung
ENDIF.
ENDFORM. "show_pic
~~Guduri

How to get values from dynamic component?

Hi:
I am displaying dynamic components based on user selection, where InputText and OutputText display properly. But now i want to read that component value on
button click. Can any body help me in that?
Source code is as follow,
text.xhtml
*<code>*
<ui:composition xmlns="http://www.w3.org/1999/xhtml"
     xmlns:h="http://java.sun.com/jsf/html"
     xmlns:f="http://java.sun.com/jsf/core"
     xmlns:ui="http://java.sun.com/jsf/facelets"
     xmlns:p="http://primefaces.prime.com.tr/ui"
     xmlns:ice="http://www.icesoft.com/icefaces/component"
     template="/WEB-INF/includes/templates/page-template.xhtml">
     <ui:define name="page-content">
          <div class="exampleBox splashContainer"
               style="background: url('./xmlhttp/css/rime/css-images/contentContainer_bg.gif') top repeat-x">
          <table>
               <tr>
                    <td colspan="2">
                    <h2>Set Request Process Flow</h2>
                    </td>
               </tr>
               <tr>
                    <td colspan="2"><ice:messages style="color:red;" /></td>
               </tr>
               <tr>
                    <td><ice:outputText value="Request Type*"></ice:outputText></td>
                    <td><ice:selectOneMenu value="#{offlinereq.requestno}"
                         valueChangeListener="#{offlinereq.requestChange}"
                         partialSubmit="true">
                         <f:selectItem itemValue="" itemLabel="--Select--" />
                         <f:selectItems value="#{offlinereq.requests}" />
                    </ice:selectOneMenu></td>
               </tr>
               <tr>
                    <td>*<h:panelGroup binding="#{offlinereq.panelBind}">*
*                    </h:panelGroup>*</td>
               </tr>
               <tr>
                    <td colspan="4"><ice:commandButton value="Add"
                         actionListener="#{offlinereq.add}" /> <ice:commandButton
                         value="Update" actionListener="#{offlinereq.update}" /> <ice:commandButton
                         value="Delete" actionListener="#{offlinereq.delete}" /> <ice:commandButton
                         value="Reset" actionListener="#{offlinereq.reset}" /></td>
               </tr>
          </table>
          </div>
     </ui:define>
</ui:composition>
*</code>*
bean.java
*<code>*
//ValuechangeListener
     public void requestChange(ValueChangeEvent e){
          System.out.println("Select Value is::"+e.getNewValue()+"::"+userid);
          Connection conn=null;
          try {
                    if(!panelBind.getChildren().isEmpty())
                         panelBind.getChildren().clear();
               Class.forName ("oracle.jdbc.OracleDriver");
               conn = JdbcUtil.getConnection();
               Statement stmt = conn.createStatement();
               String sql="select * from IB_CUSTOMER_REQUEST_PARAMETERS where IB_REQMAST_SRNO='"+e.getNewValue()+"'";
               ResultSet rs = stmt.executeQuery(sql);
               String out="out";
               int i=1;
               String ii;
               while(rs.next()) {
                    FacesContext facesContext = FacesContext.getCurrentInstance();
          Application application = facesContext.getApplication();
          HtmlPanelGrid grid = (HtmlPanelGrid)application.createComponent(HtmlPanelGrid.COMPONENT_TYPE);
               grid.setColumns(2);
          HtmlOutputText output = (HtmlOutputText)application.createComponent(HtmlOutputText.COMPONENT_TYPE);
               output.setValue(rs.getString("IB_CUSTREQSTPARA_NAME"));
               ii=Integer.toString(i);
               output.setId("a"+ii.toString());
               System.out.println("id"+ii);
               HtmlInputText input = (HtmlInputText)application.createComponent(HtmlInputText.COMPONENT_TYPE);
               //input.setValue(rs.getString(1));
               grid.getChildren().add(output);
               grid.getChildren().add(input);
               panelBind.getChildren().add(grid);
               i++;
          catch(Exception e1)
               System.out.println(e1);
     //Action listeners
     public void add(ActionEvent e)
          System.out.println("ADD");
*</code>*
Thank You,
Anup

Where are you stuck? find the component (UIComponent.findComponent) in the JSF component tree by its ID and get the value from it. This article might help:
http://illegalargumentexception.blogspot.com/2009/02/jsf-working-with-component-ids.html
Note: the code tag is \

How to change company logo dynamically using login information of the user in flex4 CSS styl method?

hi all,
I am doing mxml flex4 web application. i am using a login in my application. this login for multi user purpose.
My need is when a user login using his username and password his company logo should show the top of my application and his copyright details show the bottom of my application
if another user login means his company logo and copywrights should show in my application.
This logo and copyrights details should change dynamically based on the login information.
I want to create this using CSS file (skins and sparks)
How to do this,i am struck in this place,
Looking for useful and helpful suggession or snippet code,
Thanks in advance,
Cheers,
B.Venkatesan.

If the user is logging in, presumably you are having the user hit a back end web-server and database and using something like Blaze to connect? Right?
I personally would not do this with CSS. I would map the company icons to the users in the DB, retrieve the proper company icon and then pass it down (or embed it in the app) when the user logs in. Then, I would just set the source of the icon to be what I passed down:
Add your image where you want it to go:
<s:Image id="emptyImage" x="locationx" y="locationy".../>
Then in your ActionScript, when the user logs in and you know what company the user belongs you could do this:
private function loginUserBlazeResponse(resultEvent:ResultEvent):void {
var bytes:ByteArray = ByteArray(resultEvent.target);
emptyImage.source = bytes;
addElement(img);
img.visible = false;
img.addEventListener(FlexEvent.UPDATE_COMPLETE, imageLoaded);

How to get the id of jsf Template Component

Dear All,
I have a page template with adding attribute like pageName, companyId. Then I Page Fragment that use that page template.
In this jsff page I fill the pageName and companyId.
My question is How can I get the value of these attribute (pageName and companyId) from backing bean or application module ??
Thanks .

Hi,
starting from a component in the page fragment, you call getParent() until you hit an instance of RichPageTemplate. This then is the view template you are looking for.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e10684/oracle/adf/view/rich/component/rich/fragment/RichPageTemplate.html
AA call to get attributes should return a HashMap of attributes so you can check for the two attribute keys you are interested in
Frank

How to get this logo and effects in Illustrator?

Hi Guys,
I would like to design a logo that has similar effects (3D, bevel, shape, stroke, ...) effects like the "Circus Baroness" on the poster below. How do I get this in Illustrator?
Many thanks!
Bob

It can be done. The basic warped shapes of the text can easily be done in Illustrator with Envelope Distort.
1.) Type out "BARONESS" in a circus-like font. Then draw a rectangle that is a bit larger than that. Use the Anchor Point Tool to pull in the top and bottom of the rectangle a bit to form a concave shape. Align the "BARONESS" text and the concave rectangle shape so they are centered vertically and horizontally, the shape should be overlapping the text. With both items selected, go to Object > Envelope Distort > Make With Top Object. That will warp the text to the rectangle shape. You can release the text from this shape at any time by going back under Envelope Distort and choosing Release. Or you can choose Object > Expand to make the warp permanent.
2.) For the "CIRCUS" part, draw a rectangle approximately the length of the "BARONESS" text. Type out the "CIRCUS" text and center it over top of the rectangle. Draw two stars with the Star Tool and position them to the left and right of "CIRCUS". Select all of these and group them. Then go under Object > Envelope Distort > Make With Warp > and choose "Arc". You can adjust the Arc settings to your liking. Similarly, you can choose Object > Expand to make these permanent.
From there, you would just need to play around with the Appearance Panel to add a stroke and fill color, and play with the Shadow & Glow effects to approximate a beveled look. I would look up some tutorials on how to achieve a beveled look using the Appearance Panel. It's kind of like equivalent of Layer Styles in Photoshop, but it also functions a little differently. Some effects you could do more easily in Photoshop take a few more steps in Illustrator.

How to get checkboxes in dynamic ALV list generation

hi ,
below is the code in which two lists we wll be displayed in one layout dynamically(i.e after entering the table name two lists wll be displayed in one layout) from two different clients(i.e. source and target).
TYPE-POOLS *
TYPE-POOLS: slis.
*-- Tables Declaration
TABLES: dd02l, t000.
*-- Constants Declaration
CONSTANTS: lc_z   TYPE char1 VALUE 'Z',
           lc_y   TYPE char1 VALUE 'Y'.
DATA: ok_code TYPE sy-ucomm.
*--Internal table and Work Area Declaration
DATA: lines LIKE sy-dbcnt VALUE 0.
DATA: icursor TYPE cursor.
*DATA: icursor1 TYPE cursor.
DATA: lv_count TYPE i.
DATA: lv_table_var1 TYPE char1.
DATA: lv_ans TYPE char1.
DATA : gd_tabname TYPE tabname.
*for check boxes
DATA:l_pos TYPE i VALUE 1.
*field catalog for source client
DATA: c_cont1 TYPE REF TO cl_gui_custom_container,
c_alv1 TYPE REF TO cl_gui_alv_grid,
it_fieldcat1 TYPE lvc_t_fcat ,
ty_fieldcat1 TYPE lvc_s_fcat ,
struc_desc1   TYPE REF TO cl_abap_structdescr,
ls_fieldcatalogue1 TYPE slis_fieldcat_alv,
lt_fieldcatalogue1 TYPE slis_t_fieldcat_alv,
l_structure1   TYPE REF TO data,
l_table1    TYPE REF TO data.
for check boxes for source client
DATA: ls_edit TYPE lvc_s_styl,
lt_edit TYPE lvc_t_styl.
*field catalog for target client
DATA: c_cont2 TYPE REF TO cl_gui_custom_container,
c_alv2 TYPE REF TO cl_gui_alv_grid,
it_fieldcat2 TYPE lvc_t_fcat ,
ty_fieldcat2 TYPE lvc_s_fcat ,
struc_desc2   TYPE REF TO cl_abap_structdescr,
ls_fieldcatalogue2 TYPE slis_fieldcat_alv,
lt_fieldcatalogue2 TYPE slis_t_fieldcat_alv,
l_structure2   TYPE REF TO data,
l_table2    TYPE REF TO data.
*for source client
TYPES: BEGIN OF itab,
        t_name TYPE tabname,
        t_ref TYPE REF TO data,
*for checkboxes.
        check(1),
style TYPE lvc_t_styl,
END OF itab.
*for target client
TYPES: BEGIN OF itab1,
         t_name1 TYPE tabname,
         t_ref1 TYPE REF TO data,
END OF itab1.
*-- Field Symbol declaration for Dynamic Internal Table for source client
FIELD-SYMBOLS: <tab> TYPE table.
FIELD-SYMBOLS: <tab1> TYPE ANY.
FIELD-SYMBOLS: <l_mandt>.
FIELD-SYMBOLS: <str_comp1> TYPE abap_compdescr,
               <dyn_str1> TYPE ANY.
*--Field Symbol declaration for Dynamic Internal Table for target client
FIELD-SYMBOLS <tab2> TYPE table.
FIELD-SYMBOLS <tab3> TYPE ANY.
FIELD-SYMBOLS: <l_mandt1>.
FIELD-SYMBOLS: <str_comp2> TYPE abap_compdescr,
               <dyn_str2> TYPE ANY.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_table    LIKE dd02l-tabname,
            p_mdt_fm LIKE t000-mandt DEFAULT sy-mandt,
            p_mdt_to LIKE t000-mandt DEFAULT '910'.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON p_table.
lv_table_var1 = p_table+0(1).
*-- Validation for Standard tables
IF ( lv_table_var1 NE lc_z ) AND ( lv_table_var1 NE lc_y ).
    MESSAGE e001(00) WITH text-002.
ENDIF.
*-- Start of Selection
START-OF-SELECTION.
--for source client--
DATA itab2 TYPE itab.
DATA t_ref1 TYPE REF TO data.
itab2-t_name = p_table.
--for target client--
DATA itab3 TYPE itab1.
DATA t_ref2 TYPE REF TO data.
itab3-t_name1 = p_table.
*-- Create Dynamic Internal table for source client
CREATE DATA itab2-t_ref TYPE TABLE OF (itab2-t_name) .
ASSIGN itab2-t_ref->* TO <tab>.
CREATE DATA t_ref1 LIKE LINE OF <tab>.
ASSIGN t_ref1->* TO <tab1>.
*-- Create Dynamic Internal table for target client
CREATE DATA itab3-t_ref1 TYPE TABLE OF (itab3-t_name1) .
ASSIGN itab3-t_ref1->* TO <tab2>.
CREATE DATA t_ref2 LIKE LINE OF <tab2>.
ASSIGN t_ref2->* TO <tab3>.
*-- get the number of entries in table
SELECT COUNT(*) FROM dd03l INTO lv_count
                            WHERE tabname   = p_table
                              AND fieldname = 'MANDT'.
Check MANDT field the the table, if not exists through an error message
IF lv_count = 0.
    MESSAGE i000(8i) WITH text-001 space space.
    EXIT.
ELSE.
*-- Delete the Table Entries in the target system
    DELETE FROM (p_table) CLIENT SPECIFIED
          WHERE mandt = p_mdt_to.
    COMMIT WORK.
*-- Open cursor
    OPEN CURSOR WITH HOLD icursor FOR
      SELECT * FROM (p_table) CLIENT SPECIFIED
              WHERE mandt = p_mdt_fm.
    IF sy-subrc <> 0.
      MESSAGE e000(8i) WITH text-001.
    ENDIF.
    DO.
      FETCH NEXT CURSOR icursor INTO TABLE <tab> PACKAGE SIZE 1000.
      IF sy-subrc <> 0.
        CLOSE CURSOR icursor.
        EXIT.
      ENDIF.
*-- Modify Field 'MANDT' with the Target Client no.
      LOOP AT <tab> ASSIGNING <tab1>.
        ASSIGN COMPONENT: 'MANDT' OF STRUCTURE <tab1> TO <l_mandt>.
        <l_mandt> = p_mdt_to.
        MODIFY <tab> FROM <tab1>.
        lines = lines + 1.
      ENDLOOP.
*-- Insert records into target table
      INSERT (p_table) CLIENT SPECIFIED FROM TABLE <tab>.
*-- Close the cursor
      CALL FUNCTION 'DB_COMMIT'.
    ENDDO.
ENDIF.
for target client
*-- Open cursor
    OPEN CURSOR WITH HOLD icursor FOR
      SELECT * FROM (p_table) CLIENT SPECIFIED
              WHERE mandt = p_mdt_to.
    IF sy-subrc <> 0.
      MESSAGE e000(8i) WITH text-001.
    ENDIF.
    DO.
      FETCH NEXT CURSOR icursor INTO TABLE <tab2> PACKAGE SIZE 1000.
      IF sy-subrc <> 0.
        CLOSE CURSOR icursor.
        EXIT.
      ENDIF.
*-- Close the cursor
      CALL FUNCTION 'DB_COMMIT'.
    ENDDO.
ENDIF.
CALL SCREEN 3000.
*&      Module STATUS_3000 OUTPUT
      text
MODULE status_3000 OUTPUT.
SET PF-STATUS 'ZTESTMENU'.
SET TITLEBAR 'xxx'.
For Source client
IF c_alv1 IS INITIAL.
    CREATE OBJECT c_cont1
      EXPORTING
        container_name = 'CONTAINER_SOURCE'.
    IF sy-subrc = 0.
      CREATE OBJECT c_alv1
        EXPORTING
          i_parent = c_cont1.
    ENDIF.
    IF sy-subrc EQ 0.
      PERFORM field_cat1.
    ENDIF.
    CALL METHOD c_alv1->set_table_for_first_display
     EXPORTING
i_buffer_active               =
i_bypassing_buffer            =
i_consistency_check           =
i_structure_name              =
is_variant                    =
i_save                        =
i_default                     = 'x'
is_layout                     =
is_print                      =
it_special_groups             =
it_toolbar_excluding          =
it_hyperlink                  =
it_alv_graphics               =
it_except_qinfo               =
ir_salv_adapter               =
CHANGING
it_outtab           = <tab>
it_fieldcatalog     = it_fieldcat1
it_sort                       =
it_filter                     =
EXCEPTIONS
valid_parameter_combination = 1
program_error                 = 2
too_many_lines                = 3
others                        = 4
    IF sy-subrc <> 0.
                              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                                         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
For Target client
IF c_alv2 IS INITIAL.
    CREATE OBJECT c_cont2
      EXPORTING
        container_name              = 'CONTAINER_TARGET'.
    IF sy-subrc = 0.
      CREATE OBJECT c_alv2
        EXPORTING
          i_parent          = c_cont2.
    ENDIF.
    IF sy-subrc EQ 0.
      PERFORM field_cat2.
    ENDIF.
    CALL METHOD c_alv2->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'x'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = <tab2>
        it_fieldcatalog               = it_fieldcat2
   it_sort                       =
   it_filter                     =
EXCEPTIONS
   invalid_parameter_combination = 1
   program_error                 = 2
   too_many_lines                = 3
   others                        = 4
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDMODULE.                 " STATUS_3000 OUTPUT
*&      Module USER_COMMAND_3000 INPUT
      text
MODULE user_command_3000 INPUT.
CASE ok_code.
    WHEN 'BACK'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_3000 INPUT
*&      Form field_cat1
      text
--> p1        text
<-- p2        text
FORM field_cat1 .
Dynamic creation of a structure
CREATE DATA l_structure1 TYPE (p_table).
ASSIGN l_structure1->* TO <dyn_str1>.
Fields Structure
struc_desc1 ?= cl_abap_typedescr=>describe_by_data( <dyn_str1> ).
LOOP AT struc_desc1->components ASSIGNING <str_comp1>.
Build Fieldcatalog
    ty_fieldcat1-fieldname = <str_comp1>-name.
    ty_fieldcat1-ref_table = p_table.
   CLEAR: l_pos.
*l_pos = l_pos + 1.
*ty_fieldcat1-seltext = 'CHECK'.
*ty_fieldcat1-fieldname = 'CHECK'.
*ty_fieldcat1-tabname = 'ITAB'.
*ty_fieldcat1-col_pos = l_pos.
*ty_fieldcat1-checkbox = 'X'.
*ty_fieldcat1-edit = 'X'.
*ty_fieldcat1-outputlen = '5'.
APPEND ty_fieldcat1 TO it_fieldcat1.
Build Fieldcatalog
    ls_fieldcatalogue1-fieldname = <str_comp1>-name.
    ls_fieldcatalogue1-ref_tabname = p_table.
    APPEND ls_fieldcatalogue1 TO lt_fieldcatalogue1.
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
   i_style_table             =
      it_fieldcatalog           = it_fieldcat1
   i_length_in_byte          =
    IMPORTING
      ep_table                  = l_table1
   e_style_fname             =
EXCEPTIONS
   generate_subpool_dir_full = 1
   others                    = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN l_table1->* TO <tab>.
Read data from the table selected.
SELECT * FROM (p_table)
     CLIENT SPECIFIED
     INTO CORRESPONDING FIELDS OF TABLE <tab>
               WHERE mandt = p_mdt_fm.
ENDFORM.                    " field_cat1
*&      Form field_cat2
      text
--> p1        text
<-- p2        text
FORM field_cat2 .
CREATE DATA l_structure2 TYPE (p_table).
ASSIGN l_structure2->* TO <dyn_str2>.
Fields Structure
struc_desc2 ?= cl_abap_typedescr=>describe_by_data( <dyn_str2> ).
LOOP AT struc_desc2->components ASSIGNING <str_comp2>.
Build Fieldcatalog
    ty_fieldcat2-fieldname = <str_comp2>-name.
    ty_fieldcat2-ref_table = p_table.
    APPEND ty_fieldcat2 TO it_fieldcat2.
Build Fieldcatalog
    ls_fieldcatalogue2-fieldname = <str_comp2>-name.
    ls_fieldcatalogue2-ref_tabname = p_table.
    APPEND ls_fieldcatalogue2 TO lt_fieldcatalogue2.
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
   i_style_table             =
      it_fieldcatalog           = it_fieldcat2
   i_length_in_byte          =
    IMPORTING
      ep_table                  = l_table2
   e_style_fname             =
EXCEPTIONS
   generate_subpool_dir_full = 1
   others                    = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN l_table2->* TO <tab2>.
Read data from the table selected.
SELECT * FROM (p_table) CLIENT SPECIFIED
     INTO CORRESPONDING FIELDS OF TABLE <tab2>
               WHERE mandt = p_mdt_to.
ENDFORM.                    " field_cat2
*FOR THE ABOVE CODE I NEED CHECKBOXES IN THE FIRST LIST AND I HAVE TRIED MANY WAYS BUT I HAVENT GOT THE SOLUTION. SO, PLZ CAN U EXPLAIN BY MENTIONING THE PIECE OF CODE IN ABOVE CODE.
PLZ DO THE NEED FUL.
thanks in advance.

hi ,
below is the code in which two lists we wll be displayed in one layout dynamically(i.e after entering the table name two lists wll be displayed in one layout) from two different clients(i.e. source and target).
TYPE-POOLS *
TYPE-POOLS: slis.
*-- Tables Declaration
TABLES: dd02l, t000.
*-- Constants Declaration
CONSTANTS: lc_z   TYPE char1 VALUE 'Z',
           lc_y   TYPE char1 VALUE 'Y'.
DATA: ok_code TYPE sy-ucomm.
*--Internal table and Work Area Declaration
DATA: lines LIKE sy-dbcnt VALUE 0.
DATA: icursor TYPE cursor.
*DATA: icursor1 TYPE cursor.
DATA: lv_count TYPE i.
DATA: lv_table_var1 TYPE char1.
DATA: lv_ans TYPE char1.
DATA : gd_tabname TYPE tabname.
*for check boxes
DATA:l_pos TYPE i VALUE 1.
*field catalog for source client
DATA: c_cont1 TYPE REF TO cl_gui_custom_container,
c_alv1 TYPE REF TO cl_gui_alv_grid,
it_fieldcat1 TYPE lvc_t_fcat ,
ty_fieldcat1 TYPE lvc_s_fcat ,
struc_desc1   TYPE REF TO cl_abap_structdescr,
ls_fieldcatalogue1 TYPE slis_fieldcat_alv,
lt_fieldcatalogue1 TYPE slis_t_fieldcat_alv,
l_structure1   TYPE REF TO data,
l_table1    TYPE REF TO data.
for check boxes for source client
DATA: ls_edit TYPE lvc_s_styl,
lt_edit TYPE lvc_t_styl.
*field catalog for target client
DATA: c_cont2 TYPE REF TO cl_gui_custom_container,
c_alv2 TYPE REF TO cl_gui_alv_grid,
it_fieldcat2 TYPE lvc_t_fcat ,
ty_fieldcat2 TYPE lvc_s_fcat ,
struc_desc2   TYPE REF TO cl_abap_structdescr,
ls_fieldcatalogue2 TYPE slis_fieldcat_alv,
lt_fieldcatalogue2 TYPE slis_t_fieldcat_alv,
l_structure2   TYPE REF TO data,
l_table2    TYPE REF TO data.
*for source client
TYPES: BEGIN OF itab,
        t_name TYPE tabname,
        t_ref TYPE REF TO data,
*for checkboxes.
        check(1),
style TYPE lvc_t_styl,
END OF itab.
*for target client
TYPES: BEGIN OF itab1,
         t_name1 TYPE tabname,
         t_ref1 TYPE REF TO data,
END OF itab1.
*-- Field Symbol declaration for Dynamic Internal Table for source client
FIELD-SYMBOLS: <tab> TYPE table.
FIELD-SYMBOLS: <tab1> TYPE ANY.
FIELD-SYMBOLS: <l_mandt>.
FIELD-SYMBOLS: <str_comp1> TYPE abap_compdescr,
               <dyn_str1> TYPE ANY.
*--Field Symbol declaration for Dynamic Internal Table for target client
FIELD-SYMBOLS <tab2> TYPE table.
FIELD-SYMBOLS <tab3> TYPE ANY.
FIELD-SYMBOLS: <l_mandt1>.
FIELD-SYMBOLS: <str_comp2> TYPE abap_compdescr,
               <dyn_str2> TYPE ANY.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_table    LIKE dd02l-tabname,
            p_mdt_fm LIKE t000-mandt DEFAULT sy-mandt,
            p_mdt_to LIKE t000-mandt DEFAULT '910'.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON p_table.
lv_table_var1 = p_table+0(1).
*-- Validation for Standard tables
IF ( lv_table_var1 NE lc_z ) AND ( lv_table_var1 NE lc_y ).
    MESSAGE e001(00) WITH text-002.
ENDIF.
*-- Start of Selection
START-OF-SELECTION.
--for source client--
DATA itab2 TYPE itab.
DATA t_ref1 TYPE REF TO data.
itab2-t_name = p_table.
--for target client--
DATA itab3 TYPE itab1.
DATA t_ref2 TYPE REF TO data.
itab3-t_name1 = p_table.
*-- Create Dynamic Internal table for source client
CREATE DATA itab2-t_ref TYPE TABLE OF (itab2-t_name) .
ASSIGN itab2-t_ref->* TO <tab>.
CREATE DATA t_ref1 LIKE LINE OF <tab>.
ASSIGN t_ref1->* TO <tab1>.
*-- Create Dynamic Internal table for target client
CREATE DATA itab3-t_ref1 TYPE TABLE OF (itab3-t_name1) .
ASSIGN itab3-t_ref1->* TO <tab2>.
CREATE DATA t_ref2 LIKE LINE OF <tab2>.
ASSIGN t_ref2->* TO <tab3>.
*-- get the number of entries in table
SELECT COUNT(*) FROM dd03l INTO lv_count
                            WHERE tabname   = p_table
                              AND fieldname = 'MANDT'.
Check MANDT field the the table, if not exists through an error message
IF lv_count = 0.
    MESSAGE i000(8i) WITH text-001 space space.
    EXIT.
ELSE.
*-- Delete the Table Entries in the target system
    DELETE FROM (p_table) CLIENT SPECIFIED
          WHERE mandt = p_mdt_to.
    COMMIT WORK.
*-- Open cursor
    OPEN CURSOR WITH HOLD icursor FOR
      SELECT * FROM (p_table) CLIENT SPECIFIED
              WHERE mandt = p_mdt_fm.
    IF sy-subrc <> 0.
      MESSAGE e000(8i) WITH text-001.
    ENDIF.
    DO.
      FETCH NEXT CURSOR icursor INTO TABLE <tab> PACKAGE SIZE 1000.
      IF sy-subrc <> 0.
        CLOSE CURSOR icursor.
        EXIT.
      ENDIF.
*-- Modify Field 'MANDT' with the Target Client no.
      LOOP AT <tab> ASSIGNING <tab1>.
        ASSIGN COMPONENT: 'MANDT' OF STRUCTURE <tab1> TO <l_mandt>.
        <l_mandt> = p_mdt_to.
        MODIFY <tab> FROM <tab1>.
        lines = lines + 1.
      ENDLOOP.
*-- Insert records into target table
      INSERT (p_table) CLIENT SPECIFIED FROM TABLE <tab>.
*-- Close the cursor
      CALL FUNCTION 'DB_COMMIT'.
    ENDDO.
ENDIF.
for target client
*-- Open cursor
    OPEN CURSOR WITH HOLD icursor FOR
      SELECT * FROM (p_table) CLIENT SPECIFIED
              WHERE mandt = p_mdt_to.
    IF sy-subrc <> 0.
      MESSAGE e000(8i) WITH text-001.
    ENDIF.
    DO.
      FETCH NEXT CURSOR icursor INTO TABLE <tab2> PACKAGE SIZE 1000.
      IF sy-subrc <> 0.
        CLOSE CURSOR icursor.
        EXIT.
      ENDIF.
*-- Close the cursor
      CALL FUNCTION 'DB_COMMIT'.
    ENDDO.
ENDIF.
CALL SCREEN 3000.
*&      Module STATUS_3000 OUTPUT
      text
MODULE status_3000 OUTPUT.
SET PF-STATUS 'ZTESTMENU'.
SET TITLEBAR 'xxx'.
For Source client
IF c_alv1 IS INITIAL.
    CREATE OBJECT c_cont1
      EXPORTING
        container_name = 'CONTAINER_SOURCE'.
    IF sy-subrc = 0.
      CREATE OBJECT c_alv1
        EXPORTING
          i_parent = c_cont1.
    ENDIF.
    IF sy-subrc EQ 0.
      PERFORM field_cat1.
    ENDIF.
    CALL METHOD c_alv1->set_table_for_first_display
     EXPORTING
i_buffer_active               =
i_bypassing_buffer            =
i_consistency_check           =
i_structure_name              =
is_variant                    =
i_save                        =
i_default                     = 'x'
is_layout                     =
is_print                      =
it_special_groups             =
it_toolbar_excluding          =
it_hyperlink                  =
it_alv_graphics               =
it_except_qinfo               =
ir_salv_adapter               =
CHANGING
it_outtab           = <tab>
it_fieldcatalog     = it_fieldcat1
it_sort                       =
it_filter                     =
EXCEPTIONS
valid_parameter_combination = 1
program_error                 = 2
too_many_lines                = 3
others                        = 4
    IF sy-subrc <> 0.
                              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                                         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
For Target client
IF c_alv2 IS INITIAL.
    CREATE OBJECT c_cont2
      EXPORTING
        container_name              = 'CONTAINER_TARGET'.
    IF sy-subrc = 0.
      CREATE OBJECT c_alv2
        EXPORTING
          i_parent          = c_cont2.
    ENDIF.
    IF sy-subrc EQ 0.
      PERFORM field_cat2.
    ENDIF.
    CALL METHOD c_alv2->set_table_for_first_display
EXPORTING
   i_buffer_active               =
   i_bypassing_buffer            =
   i_consistency_check           =
   i_structure_name              =
   is_variant                    =
   i_save                        =
   i_default                     = 'x'
   is_layout                     =
   is_print                      =
   it_special_groups             =
   it_toolbar_excluding          =
   it_hyperlink                  =
   it_alv_graphics               =
   it_except_qinfo               =
   ir_salv_adapter               =
      CHANGING
        it_outtab                     = <tab2>
        it_fieldcatalog               = it_fieldcat2
   it_sort                       =
   it_filter                     =
EXCEPTIONS
   invalid_parameter_combination = 1
   program_error                 = 2
   too_many_lines                = 3
   others                        = 4
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
ENDMODULE.                 " STATUS_3000 OUTPUT
*&      Module USER_COMMAND_3000 INPUT
      text
MODULE user_command_3000 INPUT.
CASE ok_code.
    WHEN 'BACK'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_3000 INPUT
*&      Form field_cat1
      text
--> p1        text
<-- p2        text
FORM field_cat1 .
Dynamic creation of a structure
CREATE DATA l_structure1 TYPE (p_table).
ASSIGN l_structure1->* TO <dyn_str1>.
Fields Structure
struc_desc1 ?= cl_abap_typedescr=>describe_by_data( <dyn_str1> ).
LOOP AT struc_desc1->components ASSIGNING <str_comp1>.
Build Fieldcatalog
    ty_fieldcat1-fieldname = <str_comp1>-name.
    ty_fieldcat1-ref_table = p_table.
   CLEAR: l_pos.
*l_pos = l_pos + 1.
*ty_fieldcat1-seltext = 'CHECK'.
*ty_fieldcat1-fieldname = 'CHECK'.
*ty_fieldcat1-tabname = 'ITAB'.
*ty_fieldcat1-col_pos = l_pos.
*ty_fieldcat1-checkbox = 'X'.
*ty_fieldcat1-edit = 'X'.
*ty_fieldcat1-outputlen = '5'.
APPEND ty_fieldcat1 TO it_fieldcat1.
Build Fieldcatalog
    ls_fieldcatalogue1-fieldname = <str_comp1>-name.
    ls_fieldcatalogue1-ref_tabname = p_table.
    APPEND ls_fieldcatalogue1 TO lt_fieldcatalogue1.
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
   i_style_table             =
      it_fieldcatalog           = it_fieldcat1
   i_length_in_byte          =
    IMPORTING
      ep_table                  = l_table1
   e_style_fname             =
EXCEPTIONS
   generate_subpool_dir_full = 1
   others                    = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN l_table1->* TO <tab>.
Read data from the table selected.
SELECT * FROM (p_table)
     CLIENT SPECIFIED
     INTO CORRESPONDING FIELDS OF TABLE <tab>
               WHERE mandt = p_mdt_fm.
ENDFORM.                    " field_cat1
*&      Form field_cat2
      text
--> p1        text
<-- p2        text
FORM field_cat2 .
CREATE DATA l_structure2 TYPE (p_table).
ASSIGN l_structure2->* TO <dyn_str2>.
Fields Structure
struc_desc2 ?= cl_abap_typedescr=>describe_by_data( <dyn_str2> ).
LOOP AT struc_desc2->components ASSIGNING <str_comp2>.
Build Fieldcatalog
    ty_fieldcat2-fieldname = <str_comp2>-name.
    ty_fieldcat2-ref_table = p_table.
    APPEND ty_fieldcat2 TO it_fieldcat2.
Build Fieldcatalog
    ls_fieldcatalogue2-fieldname = <str_comp2>-name.
    ls_fieldcatalogue2-ref_tabname = p_table.
    APPEND ls_fieldcatalogue2 TO lt_fieldcatalogue2.
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
   i_style_table             =
      it_fieldcatalog           = it_fieldcat2
   i_length_in_byte          =
    IMPORTING
      ep_table                  = l_table2
   e_style_fname             =
EXCEPTIONS
   generate_subpool_dir_full = 1
   others                    = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN l_table2->* TO <tab2>.
Read data from the table selected.
SELECT * FROM (p_table) CLIENT SPECIFIED
     INTO CORRESPONDING FIELDS OF TABLE <tab2>
               WHERE mandt = p_mdt_to.
ENDFORM.                    " field_cat2
*FOR THE ABOVE CODE I NEED CHECKBOXES IN THE FIRST LIST AND I HAVE TRIED MANY WAYS BUT I HAVENT GOT THE SOLUTION. SO, PLZ CAN U EXPLAIN BY MENTIONING THE PIECE OF CODE IN ABOVE CODE.
PLZ DO THE NEED FUL.
thanks in advance.

How to get values from dynamically populated field symbol

Hi all,
I am having a field symbol <fs_table> type standard table, which is getting populated dynamically.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = i_fieldcat[]
    IMPORTING
      ep_table        = is_eptab.
ASSIGN is_eptab->* TO <fs_table> .
After the ALV display i am making some changes in the ALV and getting a new internal table <fst_table>,which is having changed values.
Now the problem is that i am not able to get the changed values from <fst_table> as it is not of any structure type and cant associate it with any field like we do in normal internal table and work areas like, wa-fieldname.
All the fields are dynamic.
Regards,
Anant

Hello Anant
You have to access to access the fields of your dynamic outtab dynamically as well.
DATA: ls_fcat   TYPE lvc_s_fcat.
FIELD-SYMBOLS:
<ls_struc>   TYPE any,
<ld_fld>       TYPE any.
LOOP AT <fs_table> ASSIGNING <ls_struc>.
LOOP AT i_fieldcat INTO ls_fcat.
    ASSIGN COMPONENT ls_fcat-fieldname OF STRUCTURE <ls_struc> TO <ld_fld>.
    ... " do processing
ENDLOOP.
ENDLOOP.
Regards
Uwe

How to get the value of identity template

Hello,
i have a AD resource and i want to get the identity model value in a form. Is it possible to do it ?
Thanks

A Resource object has a method getIdentityTemplate but its result type won't be easy to use inside a form.
What kind of information are you exactly interested in?
For example if you need to know which resource attributes are part of the identity template, you can find this information directly in the user view, i.e. :
<ref>accountInfo.accounts[Active Directory].attributes[idTemplate=true].name</ref>

How to Get static attributes dynamically

Hi,
I have to get static attributes from the context dynamically is it possible?
DATA node TYPE REF TO if_wd_context_node.
DATA element TYPE REF TO if_wd_context_element.
node = wd_context->path_get_node( path = path_node ).
element = node->get_element( ).
element->set_static_attributes( static_attributes = ??? ).
Thank you in advance.
Miguel

Hi ,
i would suggest to use CL_ABAP_STRUCTDESCR
cl_abap_typedescr=>describe_by_data

How to get the logo box out of pages

Hi guys I've been having trouble getting the title box (the one on the top and bottom of the page) deleted from the 09 pages,
other forums suggest i find the ccs for it? but honestly I am a new mac user and i have no idea what that means, any help would be much apprieciated!

I don't why someone would mention css in relation to Pages, that a web thing. The headers & footers are enabled by default in a Pages word processing document. You can turn them off in the document inspector. To recover the space, change the size to zero before unchecking the box. To make this the default for new document you'll need to save as a template & set this template to be the default in preferences.

How to get a logo dynamically in template

Similar Messages

Maybe you are looking for