How to get accurate results of RGB adjustment layer Shadows in CMYK?

Hi Guys,
This is regarding RGB shadows to CMYK shadows. Most of the times we get the shadows from adjustment layers, when we converting to CMYK shadow as a separate layer it's really difficult to get the results as it in RGB.
In this process we won't get accurate results since we are creating manually. So I would like to know your opinions that how we can get the accurate results?
You can see the following image.
Regards
HARI

I really need to convert to CMYK since I use for packaging.
Am I right to assume that you print in-house then?
So might you not be able to obtain the correct profile for the respective press and just correct the RGB-file as necessary and separate a flattened file at the end?
If you have to to maintain vector- and type-elements you could separate on pdf-creation and subsequently correct those vector elements in Illustrator (if necessary).
Though I have to admit this would hardly be an ideal process as a converted psd-pdf can be a bit complicated.
Another option might be to convert all pertinent elements to a Smart Object in RGB (including the background), keep the vector-/type-elements separate and convert that file to the proper CMYK-space without flattening the SO.
Anyway, handling material from many different sources can of course be quite a challenge depending on the providing parties.

Similar Messages

How to get accurate results from sql code ?

Hello everybody,
I have a problem with some portion of my code.
I get more results than I specify in the where clause.
Here is the sample code:
c.gl_acct_id between '110'||'-'||'6890'||'-'||'69000'||'-'||'%'
and '110'||'-'||'7000'||'-'||'67999'||'-'||'%'
For some reason I also get the following results back:
110-6910-51001-001, and 110-6910-51003-001 But I don't need the 51001 and 51003. How do I specify in sql what range I really want. I was sure that the code above is correct. I guess not.
I would appreciate any help,
Thanks,
Sonya

Have you tried using the query either of the following...
1) c.gl_acct_id between '110-6890-69000-000'
and '110-7000-67999-999'
and c.gl_acct_id not like '110-6910-51001-%'
and c.gl_acct_id not like '110-6910-51003-%'
assuming you have only 3 digits at the end of gl_acct.
2)If you know that your acct_id belongs to only 69000 or 67999
then
(c.gl_acct_id LIKE '110-6890-69000-%' OR
c.gl_acct_id LIKE '110-7000-67999-%' )
Plz. let me know if this not what you are looking for.
thanx
rajkiran
Here is the whole script:
select distinct c.gl_acct_id acct_no,
c.gl_acct_desc,
min(a.local_act_beg_bal) local_act_beg_bal,
sum(b.local_act_mtd_dr_amt) debits,
sum(b.local_act_mtd_cr_amt) credits,
nvl(min(a.local_act_beg_bal),0)+sum(nvl(b.local_act_mtd_dr_amt,0))-
sum(nvl(b.local_act_mtd_cr_amt,0)) end_bal
from gl_acct c, gl_acct_bal a, gl_acct_bal b
where c.org_unit_id = '110'
and b.gl_acct_id = c.gl_acct_id
and a.gl_acct_id = c.gl_acct_id
and c.sum_det_ind = 'D'
and c.gl_acct_class_ind in ( 'A' , 'L' , 'Q' , 'I' , 'E' )
and a.year_no = '2001'--:loyear
and a.period_no = '1'--:loperiod
and ( ( b.year_no = '2001'--:hiyear
and b.period_no between '1'--:loperiod
and'13')-- :hiperiod
and c.gl_acct_id between '110'||'-'||'6890'||'-'||'69000'||'-'||'%'
and '110'||'-'||'7000'||'-'||'67999'||'-'||'%'
group by c.gl_acct_id, c.gl_acct_desc
I want to have ability to specify ranges for gl_accoount.
Thanks,
Sonya

How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

How to get accurate photo printouts using FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

How to get query result in comma dilimited text or excel file?

Does anybody know how to get query results in comma delimited
text file or excel file, I tried spool abc.txt, but the result
showed some ------ lines
Thanks

Try doing this in your sql scripts
set heading off
set pagesize 0
set linesize 4000
set feedback off
set verify off
set trimespace on
set colsep ","
spool output.txt
select * from dual (or whatever you are querying
spool off
There may be a couple other set statement that you could add but
this should get you started in the right direction

Call function in background task... How to get the result?

I want to use Call function in background task parameter.
But I cannot find the result of this function. (No export parameter, no table result, no exception)
How to get the result of this function module? Correct or not?

Hi Heinz,
You can check the result in SM58 transaction.
For more information pls. refer this thread :
No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
Best regards,
Prashant

Af:query - How to get the result rowsets

Hi,
I have a requirement where i need to search the db rows on and append the results the adf rich table on each search.
For this i am using af:query component. And trying to get the result rows for the named criteria.
String mexpr = "#{bindings.DestinDescVOCriteriaQuery.processQuery}";
processMethodExpression(mexpr, queryEvent, QueryEvent.class);
ViewCriteriaManager vcm = getDestinDescViewObj().getViewCriteriaManager();
ViewCriteria vc = vcm.getViewCriteria("DestinDescVOCriteria");
getDestinDescViewObj().applyViewCriteria(vc);
AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();
adfFacesContext.addPartialTarget(tblDestinDesc);
However on each click of search the rows searched in the previous attempt are not retained.
Can anyone let me know how to get the result from named criteria and append it the table?
Thanks
Ajay

Can anyone help?

How can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

how can i do with labview program,when i have 20 different values,and 1 want to add it with constant value.and how to get the results?

Why do the 20 values have to be different? The same code should work even if some are equal.
What do you mean by "get the result"? The result is available at the output terminal and all you need is a wire to get it where you need it. That could be an indicator, another operation, or even a hardware device.
What is the data type of the 20 values? An array? A cluster? A bunch of scalars? A waveform? Dynamic data?
LabVIEW Champion . Do more with less code and in less time .

How to get the results for given Bind Variable

Hi
Can any one help me how to get the result rows from the View Object after executing the view object query by setting bind variable?
snippet as follows
viewObject.setNamedWherClauseParams("name","hei");
viewObject.executeQuery();
How to get the results from viewObject is my question..?
Thanks in advance

Should be something like
while (vo.hasNext()){
Row r = vo.next();
r.getAttribute....
You might want to read the "most commonly used methods" appendix in the ADF Developer Guide.

How do I create layers in an adjustment layer and transfer those layers?

How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my lay out and what i've done this far.
Thank you

You need to get out of single image view. Go to the editor preferences>general>Allow Floating Windows, then go to Window>Images>Float all in Window, then Tile or Cascade. Then you should be able to drag the layers from the layers panel for one image into the main image window (not the panel) for another image.

Indesign CS3: How to get the number of the current layer?

Hallo!
How to get the number of the current layer in a page?
Thanks,
Alois Blaimer

InterfacePtr<ILayerList> layerList(documentUIDRef, UseDefaultIID()); int32 layerCount = layerList->GetCount(); To findout layer name use IDocumentLayer* documentLayer = layerList->QueryLayer(layerIndex); PMString layer=documentLayer->GetName();

M-Audio Fast Track, how to get best results?

Hey guys.
I just got my M-Audio Fast Track. It seems quite cool. Not really to sure what to do with it though!
I'm using it to record guitars and vocals into GB.
So how can i set it up to get best results?
Right now I have my Audio System Preferences set to Built in Audio for In and Out, but in GB preferences I have Input set to FastTrack and Out set to Built-In...
It seems to be quite quiet, quieter than if i plug my guitar directly into the iMacs line in...?
Cheers
jim
P.S. Please don't bother writing about how I should have bought a Firewire device or anything else, I'm a cheap *** student, I bought what I could!

Jim
I have just bought one and the sound is good. I monitor sound thru my HI_FI system. The settings I have are:
1. Leave sound settings alone in system preferences.
2. In GB2 I have set input and output devices to fast track. (By the way there are no drivers available for this device - it is natively supported by OS X)
To adjust volume I have to adjust the right hand output volume knob on the front of the Fast track. My G5 system volume control has no effect on the fast track.
Andrew

How to get the results in one line

Hi
if i use the script below i get the name of path and then : and in next line i get the results.is there a way to get the results from every path after the : and not in the next line?
another question - is there a way that the script will not show the server name on every path?
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter
THC

If you take you script and pipe it to get member, it will give you a list of various script properties.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | get-member
You will see that the object type returned by "Get-Counter" is Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet.
TypeName:
Microsoft.PowerShell.Commands.GetCounter.PerformanceCounterSampleSet
Name MemberType Definition
Equals Method bool Equals(System.Object obj)
GetHashCode Method int GetHashCode()
GetType Method type GetType()
ToString Method string ToString()
CounterSamples Property Microsoft.PowerShell.Commands.GetCounter.Perfo...
Timestamp Property datetime Timestamp {get;set;}
Readings ScriptProperty System.Object Readings {get=$strPaths = ""...
You can try grabbing different properties, and they will print out differently, displaying the data on the same line in some cases. For example, pipe your output to a "foreach-object" block, and then for each object print out the CounterSamples property.
(Get-Counter -ListSet LogicalDisk).PathsWithInstances | Get-Counter | foreach-object { ($_).CounterSamples }
This should all print on one line now. However, you also asked if there was a way to not have the server print out on every line. The way to control the format of these outputs is to use the "format-table" cmdlet. So you would pipe your output to format-table
and then give it various options. This is how you would pipe it (without any options).
(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | object { ($_).CounterSamples | format-table }#OR USE YOUR ORIGINAL CODE(Get-Counter -ListSet LogicalDisk).PathsWithInstances |
Get-Counter | format-table }
Now, it's up to you to give format-table the options you want. With no options, output will look unchanged. To see what options are available to you, use get-help.
get-help format-table
I hope this helps!
Thank for all the info...

DbGetQuery = How to get the results to display?

I am using the following
sqldata <- dbGetQuery(con," select sysdate from dual")
How do I get the result to display?
summary(sqldata) displays the values
if I do dbSendQuery then fetch show the results
help(dbSendQuery) and help(dbGetQuery) go to the same page! dbSendQuery
The documentation says dbGetQuery will connect, get the records and clear; maybe the clear happens before the display?!

Hello Amin,
Here is the way to display the result from the query you provided:
Assign the result of the query to object 'sqldata':
R> sqldata <- dbGetQuery(con," select sysdate from dual")
Type the object name at the R prompt:
R> sqldata
SYSDATE
1 2014-04-28 14:45:14
Sherry

How to get two Results - Sum and Average for one KeyFigure

I have "Material" in Rows and "Cal Year/Month" in Columns and also KeyFigure "Qty" in Columns.
The Results (Yellow) of "Qty" is defined as "Avg of all values <>0". This works fine but how do I get two Results - one is a "Sum" and the other "Avg" for just one KeyFigure. The output basically should look like below:
 Cal Yr/Month 01/2006 02/2006 03/2006... Result Result
Material Qty Qty Qty Sum of Qty Avg of Qty
ABC 100 0 200 300 150
DEF 100 200 300 600 200
GHI 500 300 400 1200 400

Hi Srinivas,
I think you must use Restricted Key Figures and Formula.
Do not introduce CALMONTH in columns, but restrict 12 times the Key Figure Qty with 0CALMONTH3, that is 01-02-03-...
Then create a Formula that is the Sum of all Restricted KF and call it SUM.
Then copy the previous Formula (SUM) and call it AVG and give the option of Average of all Values <>0.
Try.
Ciao.
Riccardo.

How to get Test Results to SQL w/o Coldfusion

Is there a way to get Captivate test results (or any results)
to SQL. I was thinking of using the SCORM interface?
A simple elegant solution would be great since I want to
build it into to all my componants.
Thanks in advance,
Scott

If your organization is running Sharpoint 3.x, you can use
the sharepoint learning kit which runs off of a sql back end. This
is a SCORM 2004 compliant LMS that can be found here:
http://www.codeplex.com/SLK
If you want to do this without an LMS, you can set up your
quiz to just send the score as in this article:
http://www.adobe.com/devnet/captivate/articles/store_cpresults_print.html
You steal the idea from here, but in your javascript, you can
do a pass your variables (quiz resutls), to an asp.net page that
places them into a SQL db. I'm working on such a solution right
now. That way, you don't need an LMS and you have complete control
over how and when the results are stored.

How to get accurate results of RGB adjustment layer Shadows in CMYK?

Similar Messages

Maybe you are looking for