How to get active calories to count in HealthKit on new iOS?

On the new iOS, how do I get the active calories to actually start counting? I figured out the steps and the distance, but I cannot get the active calories to work. thanks!

Hello jardizzoni,
Thanks for using Apple Support Communities.
Below you can see what the collection options are for the Health app.
Enter your own data. If the parameter is in your Dashboard, just tap it there, then tap Add Data Point. Otherwise, tap Health Data at the bottom of the screen, tap the parameter you want to update, then tap Add Data Point.
Collect data from a device. Follow the instructions that can come with the device to set it up. If it’s a Bluetooth device, you need to pair it with iPhone—see Bluetooth devices.
Collect data from an app. Follow the instructions that can come with the app to set it up, then watch for a sharing request where you control whether data is shared with the Health app.
Stop app data collection. Tap Sources at the bottom of the Health screen, then select the app in the Apps list. Or tap the associated parameter in your Dashboard or in the Health Data list, tap Share Data, then choose the app under Data Providers.
Collect health and fitness data
Take care,
Alex H.

Similar Messages

How to get Active users list in Essbase 6.5.6

Hi Gurus,
How to get Active users list in Essbase 6.5.6 version
I dont find any Esscmd to find active users list....
i used LISTLOGINS command in ESSCMD but its not helping me out....
pls suggest me some approach to find active users list.
Thanks in advance....

Hi ,
Display sessions will give only active users details which are currently connected to the ESSBASE .
if you need this list ? or you need the total list of security active users list ?
if you need the currently connected to the ESSBASE
if you check one server At a time or you can check the application level also
1)server level
display session all;
2)application level
display session on application 'application name ';
go for the run command ---> essmsh-----> login;----->enter user name ----> enter password----->enter host (like server name ) then you need to you above 1 &2 commands
Thanks,
suresh

How to get list of buttons count

how to get list of buttons count in the oracle web page (similar to child objects concept in QTP for getting buttons count in a page)

Hi Rakesh,
I think you are looking for something like this:
Using Powershell to list all users that had completed
a password reset within the last 30 days
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

How to get Process Task Retry Count using API (OIM 10g)

Hi ,
I want to get all the process task which are failed after retried 5 times.
For e.g Create user task in AD retried for 5 times but still it is in failed state. I want to get all such process task.
I am stuck at point how to get process task retry count from process definition?
Thanks

You can reference the code in the "Task Timed Retry" scheduled task to get what you are looking for. Here is the decompiled code:
>
package com.thortech.xl.schedule.tasks;
import Thor.API.Operations.tcScheduleTaskOperationsIntf;
import com.thortech.util.logging.Logger;
import com.thortech.xl.dataaccess.tcDataSetException;
import com.thortech.xl.dataobj.tcDataSet;
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
import com.thortech.xl.util.logging.LoggerMessages;
import java.sql.Date;
import java.util.Hashtable;
public class tcTskTimedRetry extends SchedulerBaseTask
private static Logger logger = Logger.getLogger("Xellerate.Scheduler.Task");
Date isCurrentDate;
public void init()
logger.debug(LoggerMessages.getMessage("EnteredMethodDebug", "tcTskTimedRetry/init"));
this.isCurrentDate = new Date(System.currentTimeMillis());
logger.debug(LoggerMessages.getMessage("LeftMethodDebug", "tcTskTimedRetry/init"));
public void execute()
logger.debug(LoggerMessages.getMessage("EnteredMethodDebug", "tcTskTimedRetry/execute"));
tcDataSet localtcDataSet1 = new tcDataSet();
tcDataSet localtcDataSet2 = new tcDataSet();
tcDataSet localtcDataSet3 = new tcDataSet();
try
if (isStopped())
return;
localtcDataSet2.setQuery(getDataBase(), "select osi_retry_on from osi where 1=2");
localtcDataSet2.executeQuery();
if (isStopped())
return;
localtcDataSet2.setDate("osi_retry_on", this.isCurrentDate);
localtcDataSet1.setQuery(getDataBase(), "select osi.sch_key, osi.mil_key, osi.orc_key, osi.osi_rowver, sch.sch_rowver, osi.osi_retry_for, osi.osi_retry_on, osi.osi_retry_counter, sch.sch_note from osi osi,sch sch where osi.osi_retry_on <=" + localtcDataSet2.getSqlText("osi_retry_on") + " and osi.sch_key = sch.sch_key" + " and sch.sch_status='R'" + " and osi_retry_counter>0 order by osi.sch_key");
localtcDataSet1.executeQuery();
if (isStopped())
return;
int i = localtcDataSet1.getRowCount();
logger.debug("tcTskTimedRetry:execute:Number of Process tasks retrieved is=" + i);
tcScheduleTaskOperationsIntf localtcScheduleTaskOperationsIntf = (tcScheduleTaskOperationsIntf)getUtility("Thor.API.Operations.tcScheduleTaskOperationsIntf");
tcDataSet localtcDataSet4 = new tcDataSet();
localtcDataSet4.setQuery(getDataBase(), "select osi_retry_for, osi_retry_counter from osi where 1=2");
localtcDataSet4.executeQuery();
Hashtable localHashtable = new Hashtable();
if (isStopped())
return;
for (int j = 0; j < i; j++)
if (isStopped())
return;
localtcDataSet1.goToRow(j);
localtcDataSet3.setQuery(getDataBase(), "select count(*) as counter from osi osi,sch sch where osi.sch_key = sch.sch_key and osi_retry_for=" + localtcDataSet1.getLong("sch_key"));
localtcDataSet3.executeQuery();
if (isStopped())
return;
if (localtcDataSet3.getInt("counter") > 0)
continue;
localHashtable.put("osi_retry_for", String.valueOf(localtcDataSet1.getLong("sch_key")));
localHashtable.put("sch_note", localtcDataSet1.getString("sch_note"));
long l = localtcDataSet1.getLong("osi_retry_counter");
if (isStopped())
return;
try
localtcScheduleTaskOperationsIntf.createScheduleItem(localtcDataSet1.getString("orc_key"), localtcDataSet1.getString("mil_key"), localHashtable, l - 1L);
catch (Exception localException2)
logger.error(LoggerMessages.getMessage("ErrorMethodDebug", "tcTskTimedRetry/execute", localException2.getMessage()), localException2);
catch (tcDataSetException localtcDataSetException)
logger.error(LoggerMessages.getMessage("ErrorMethodDebug", "tcTskTimedRetry/execute", localtcDataSetException.getMessage()), localtcDataSetException);
logger.debug("PJ:tcTskTimedRetry:execute:DataSetexception has occured");
catch (Exception localException1)
logger.error(LoggerMessages.getMessage("ErrorMethodDebug", "tcTskTimedRetry/execute", localException1.getMessage()), localException1);
logger.debug(LoggerMessages.getMessage("LeftMethodDebug", "tcTskTimedRetry/execute"));
public boolean stop()
logger.debug("tcTskTimedRetry:stop:Task being stopped");
return true;
>
-Kevin

How to get a total record count before grouping?

I need to group a report on a formula that does roughly the following:
[record count] / ( [total record count] / 20 )
What this acheives is to label each record with a number of 1 - 20 which I want to group on. Getting this figure is the easy part, what is not working is the fact that I cannot group from a formula that is calculated after grouping. I overcame a portion of this by using "Whilereadingrecords" (rather than "count", running totals, or while printing records) to acheive a record count.
I can't figure out how to get a total record count done before grouping. Is there a way to do this with "WhileReadingRecords"?? Is this even possible?
Thanks
John

Hi John,
The order of how Crystal does things dictates the order of which features you can use. Crystal has a two pass method. In the first pass it does things like passing the query, grouping, summarizing. In the second pass it does formulas, formatting, etc.
Unfortunately Crystal does the Grouping before summarizing so what you want to do can't be done in Crystal. The best way to get around this to either create a SQL Command or view/stored procedure that will do the summarizing for you. Then in the report you can use it.
Hope this helps,
Brian

When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."

When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT. MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.

I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

How to get original serial number to reload program onto new computer?

How to get original serial number to reload program onto new computer?

Hi rehe,
Please check the KB: Find your serial number quickly to find your serial number.
You can contact our chat support for help in retrieving your serial number: Serial number and activation support
Regards,
Rave

HT1727 My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again.

My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again. I just want to be able to get all of my music that I bought on itunes onto my computer. Right now the money ive spent is just gone and I have no music to show for it.

Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

HT4623 After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from. Please help

After i updated my iPhone i realized i do not have my camera anymore how to get it back? I also using a new notebook so I do not have a back up to transfer it from. Please help

I'm assuming you mean you don't have your camera application (which is not saved on any backup anyway).
One way to find it is to get to your home screen, swipe the screen from right to left, and type "Camera" in the search field. Camera is a core Apple app and cannot be deleted, so it must be there somewhere.
An alternate approach is to do Settings > General > Reset > Reset Home Screen Layout

How to get the search option when we are creating new view

Hi,
How to get the search functionality when we are creating new view.
Ex:- if we see the standard component BT112S_SC. Under this
AdvancedSP is the view,
same kind of view if i want to create new view with same bol entity in my new component. I am unable to get that search functionality.
for search functionality,,i think view should inherit the super class CL_BTSRV_ADVS_CNTRL, but in my new view controller class, i am unable to find this class.
Can anybody give me some inputs on this.
Thanks,
neelam

In case you are still not able to proceed please refer the following blog.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view
Regards,
Harshit

Anyone know how to get harman kardon soundsticks II to work on new iMac Mavericks

Anyone know how to get harman kardon soundsticks II to work on new iMac Mavericks??

I'm using the original HK Soundsticks on a 2013 MacBook Air running Mavericks.
Don't they show up in the Sound Preferences? Are they plugged directly into your iMac?
Little more info would help.

In BAM, how to get activity ID for the running instance in the orchestration.

I am trying to add document reference URL to the active instance in the orchestration for the activity which is already started.
Please let me know how to get such activity ID.
Thanks
Jagadeesh
Jagadeesh RS

Are you using TPE to set up the Activity Tracking or BAM API. If you are using TPE then identify what has been set as the Activity Id in the BTT file. If the Message Id is used then use "BTS.InterchangeID" [refer
http://msdn.microsoft.com/en-us/library/aa562116.aspx] on the received message to get the Activity Id.
If however you've mapped the Activity Id in BTT to the InstanceId then use
"Microsoft.XLANGs.Core.Service.RootService.InstanceId"
to get the activity id.
Regards.

How to get active tab strip name using standard function ?

Dear all,
I have 5 Tab strip in my view, how can i know which tab strip is active during runtime ?
Best Regards
Fernand

HI
I hope you may be looking at this thread , hope its a similar requirement as yours
How to get the selected Tab from a TabStrip.
Thanks

How to get active network interface name?

Hi All,
Can any one tell me how to get the currently active network interface name (Local Area Connection/ Wireless Network Connection/ other) either by using java SDK or win32 API.
Is there any function to get the active network interface name in java/win32?
Is there any procedure for it to get from observing registry keys.
I found NetworkInterface class in java but not yet succesful in getting the display name of active network interface.
Can anyone help me with partial code?
Please help me.

Use getLocalHost() then retreive the list of NetworkInterfaces and cycle through them until you find the one that has that address.

How to get active monitor-Multiple monitors connected to a single machine.

Hi,
How to get the id of active graphic device, in case of multiple graphic devices connected to a single machine(Multi-headed display/ multi headed nodes) using Swing.
Prashanth.

Ah, youre actually asking different things.
In your topic title, you say youre running separate instances
In your body text, you say you are under different user/schema
So tell me, do you have more than one database or not? How many entries in your TNS file?
I would say, for "multiple database instances"
SELECT
a.id, b.id
FROM
tableA a
INNER JOIN
tableB@OTHER_DATABASE_LINK_NAME b <--NOTE!
USING(id)And of course you will have to look up CREATE PUBLIC DATABASE LINK sql..
Message was edited by:
charred

How to get active calories to count in HealthKit on new iOS?

Similar Messages

Maybe you are looking for