How to get actuals at budget exchange rate
Hi All,
I am working on a multi currency planning application.
I want to do variance reproting wherein I have to calculate variance between actual * actual exchage rate and actual * budget exchange rate.
What can be the best way to do this?
To get actuals at budget exchange rate the normal practice is to have another scenario called something like actual_bud_rate where you have the budget exchange rates loaded.
The variance can then be accomplished in many ways whether that be via SmartView, Financial Reports, or creating another scenario and using one of the variance functions @VAR, @VARPER.
The key to any of the methods for variance is that new scenario and loading the budget rates to that scenario.
Regards,
John A. Booth
http://www.metavero.com
Similar Messages
-
How to get actual value from LOV list
Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
Thanks.Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
<html:select property="UserJobCompanyId"
disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
onchange="submitform();">
<html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>
</html:select>and I want to get CompanyID of selected Company.
Thanks, again. -
How to restrict manual change to exchange rate.
Hello
Requirement:
Our requirement is we want to control the manual exchange rate entry(user type or otherwise) at different form e.g. AP Invoice screen,AR Invoice,GL JV.
What ever the rate defined pops up,should only be used for transactions and no scope should be given to user to change the rate.
Process:
Our process is that We have a boundary system and we manually enter the rates daily and upload to Oracle Application by running a program interfaced with the boundary system.The rates fetched from the boundary system sits in daily rate form as spot rate.
The profile option "AR: Default Exchange Rate Type" has value "spot".
Similarly in payable option the rate given as "spot".
Solution provided by our consultant:
We have Below clarification from the consultant Oracle team on controlling who can enter exchange rates manually vs who can not.
Pls see response for both sub ledger and general ledger transactions. An ability to limit manual exchange rate entry & view is, therefore, available in Oracle.
In Oracle, the transactions are created in subledgers and manual journals are created in General Ledger.The defaulting of exchange rate type is done separately for different subledgers. For General Ledger (creating manual journals) the control is separate.
1)For transactions originating in subledgers , for eg.Accounts Receivable, the name of the profile option is "AR: Default Exchange Rate Type" and looking at your requirement, this should be set at "Corporate" and not "User" or "Spot". Setting it at Corporate, will make the application look at the predefined corporate rates. Similarly for transactions (invoices/payments) in Accounts Payable, the defaulting can be configured through payable options.
2)For manual journals , the defaulting of exchange rate type is controlled separately. This can also be secured by definition access set which will prevent unauthorized changes to rate type.
Questions:
1.Can we take their suggest given our process that changing the rate to corporate will restrict manual intervention of the user.
2.whether definition access set feature available in 11.5.10.2 and if so how can we configure.
3.What is the best way to restrict user from manual intervention.Hello.
For the mentioned forms, you can use Forms Personalization to force users to use a certain type(s) of exchange rate.
Octavio -
How to get actual error from Crystal Report
We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in AdvanceSame as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek -
How to post the revenue on exchange rate in SAP ?
Hi All,
a Company gets a g.l. bank account in USD (account currency). The local currency is EUR.
2010.01.01: its balance was 9.527,23 USD (account currency). Given a currency exchange rate 1 USD x 1,4406 EUR, the amount of the account in local currency was 6.613,38 EUR.
2010.01.15: the bank account is closed. Given a currency exchange rate 1 USD x 1,4374 EUR, the amount of the account in local currency is 6.628,10 EUR
When the account bank is closed the balance in local currency is 14,72 EUR -
2010.01.01 --> 9.527,23 USD (account currency); 6.613,38 EUR (local currency).
2010.01.15 --> 9.527,23 USD (account currency); 6.628,10 EUR (local currency).
20.01.15: in local currency I've to post a revenu of 14,72 EUR
Could anyone tell me which account posting I've to do for this revenue?
ThanksThe differemce is due to exchange rate difference post the difference in a new g/l name it exchange rate diff. revenue account for more read below:
Exchange Rate Rounding Differences
When an invoice is posted in a foreign currency, the amounts are translated into local currency. Since the system rounds off the amounts in each posting line, this can lead to rounding differences due to the currency translation.
These differences are posted to an expense or income account.
During the document check, the system displays a posting line for the corresponding account.
Thanks,
Vishal -
HOw to see currency pairs in Exchange rate type
Hi,
Can anyone tell me how to see currency pairs in an exchange rate type?
ThanksHi,
I am not sure this is a right solution. But I have some inputs on your requirements:
1. For traveller cheques you may create a new payment method and do the required configuration for automatic payment program. Don't generate any payment medium while running APP.
2. For currency notes (cash payment) I am not sure how it works. But probably it is possible by creating an account (account ID) for a particular house bank and use that (house bank & account id) for making payment.
Per my knowledge we have never used payment method cash (currency notes) in APP. But logically it would work by create a new payment method and doing the required config for APP.
Please update if you found a better way to do this.
thanks & regards,
Kumar -
How to post gain/loss on exchange rate from Money Market
Dear Sap Expert,
I need your kindly help about posting gain/loss in Treasury with money market type.
My scenario use the product type 55A - Interest rate instrument and transaciton type = 200 borrowing in Foreign currency transaction as the transaction as belows,
Date Flow Type Name Amouunt currency Exchange rate Amt.Local currency
19.10.2011 1105 Borrowing 10,000 USD 30.00 300,000
30.10.2011 1120 Final repayment 10,000 USD 30.00 300,000
For the normally the system generate current exchange rate from the configuration .After that I try to change the Exchange rate manually in Flow type 1120 from 30.00 to be 31.00 then the Amt.in Local currency changed to be 310,000 and the flow type gain/loss from exchange rate does not generate ( In Loan Management I can do it)
On 19.10.2011 I use t-code TBB1 to post the borrowing transaction (1105)
On 30.10.2011 I use T-code TBB1 to post the Payment transaction but the gain/loss account does not happen.
For my question Can the system post document for flow tpe 1120 (on 30.10.2011) with exchange rate realized gain/Loss automatically? or how should I do to make it correctly.
Thank you very much for your suggestion.
PKHi,
your customizing for Derived Business Transactions requires DBT_B flows in your PMP in order to post realized gains/losses.
Regards,
Lorenz -
How to require to specify an exchange rate type on F110 ?
Dear all,
When we use Tcode: F110, by default the exchange rate type M is taken.
But in our case, we would like to use the exchange rate type B.
Is it possible to give a default value for this field ==> B ?
Or how could I force the user to specify a value for this field ?
Thank you for your help
Best regardsHi,
That is possible in Define Valuation Methods
spro/ Financial Accounting (New) / General Ledger Accounting (New) / Periodic Processing / Valuate / Define Valuation Methods
there it self u can maitain Exchange rate type for Debit balance B.
Exchange rate type for Credit balance B
If u have any doubt let me know.
Regards,
Nauma. -
Easy Custom device tool - how to get actual waveforms or data from a channel
I want to use a custom device to do the simulation for my system, but I am not sure how to get channel data to it? I am using a cRio 9024, and 6 modules for signal input and signal output. I did the walk through, but it is not connecting to channel data. Any thoughts?
Attachments:
Add.zip 164 KBSorry that my previous response was so brief - I didn't have the opportunity to take a look at your code last Friday (and on top of that, I poorly worded my question about running your code in LabVIEW).
You would want to include logic to communicate with your cRIO in the Execute VI - you don't need to add anything to the Channel Data or System Data controls to get the data into your custom device. If you're using the Scan Engine, this would mean just dragging and dropping Scan Engine IO variables into the Execute VI and then operating on the data you read out of them. Now, if you want to pass data out of the custom device to other parts of VeriStand, you would need to add items to Channel Data for each value you want to pass out of the custom device.
When I mentioned running your code in LabVIEW, the idea I was trying to get at is creating a separate test project to verify that the logic you have implemented in your Execute VI works apart from the custom device architecture. Now that I've had a chance to take a look at your code, I see that the logic to communicate with the cRIO hasn't been implemented yet. As such, that original suggestion doesn't make sense - sorry for the confusion.
Also, just so you're aware, you'll need to modify your custom device project to allow the custom device to be compiled for a VxWorks target. To do so, add your cRIO to the project as a new target and then copy all of your custom device files to the cRIO controller. You'll also need to make some modifications to the build specification to get everything to compile correctly.
Finally, I also notice that in your init VI, you don't pass a file path to the Open/Create/Replace file VI, which will likely cause some problems when you try to run the device.
Regards,
Ryan K. -
HOW TO GET ACTUAL DATE FOR A DATE TYPE ITEM
Hi
We want to get actual date(today) automatically to the date type item on our form page. I should be able to change it also.
thank you very much for help
ömer faruk akyüzlü
in Turkeyhi ömer faruk akyüzlü,
Make the Source Type as PL/SQL Expression or Function
and in the Source Value or Expression
enter SYSDATE Make the item as the date picker of the format whatever u want.
hope this helps u better.
bye
Srikavi. -
How can we know where the exchange rate type is used?
Hello experts,
I have a question regarding exchange rate type.
There is a custom exhange rate type ZXXX in our system, however, we don't know where this exchange rate type ZXXX is used. Is there any method that we can find where this exchange rate type is used?
Many thanks.
Christina.
Edited by: Christina wang on Nov 28, 2008 4:28 AMExchange Rate Type is created in SPRO:-SAP Net Weaver>General Settings>currency>Check Exchange Rate type.
It is used for maintainace of Exchange Rate in OB08 for direct & indirect quote..
Regards,
Alok -
How to get actual user name without admin rights from AD?
Hi,
I have set up WebLogic Portal 8.1.2 to point to Active Directory, using ActiveDirectoryAuthenticatorMBean I'm trying to retrieve the actual user name e.g. John English. Can someone give me some advise what is the proper function to use. I tried getUserDescription but it requires AD admin rights. I can't get admin rights! Is there any workarounds?
Thank you very much.
Regards,
DamonYou might use GLOBAL_NAME, but the result could be not what you need. If you can login to DB server you can use "lsnrctl services" to see how the DB is registered with the listener. See this example :
SQL> sho user
USER is "TEST"
SQL> select * from v$instance;
select * from v$instance
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> col GLOBAL_NAME for a60
SQL> select * from global_name;
GLOBAL_NAME
ORA9.US.ORACLE.COM
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
$ lsnrctl services
LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 25-FEB-2008 18:21:10
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
Services Summary...
Service "foo" has 1 instance(s).
Instance "ora9", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
The command completed successfully
$in this case "foo" is what you'd need.
Of course you can always grant SELECT ANY DICTIONARY privilege to that user.... -
How to get actual error messages
I use a call transction method if there is any error capture it to an internal table of
type bdcmsgcoll..
But here it gives me just batch parameters and other fields along with a message number..susing this message number how do i get the actual SAP genrated message(text message)..ther must be some function module which will give accept these parameters and give out hte actual message...Hi,
You can get the actual error message by using the FM <b>FORMAT_MESSAGE</b>.
Lets suppose that you got error messages into t_msg internal table...
loop at t_msg into x_msg.
call function 'FORMAT_MESSAGE'
exporting
id = x_msg-msgid
lang = sy-langu
no = x_msg-msgnr
V1 = x_msg-MSGV1
V2 = x_msg-MSGV2
V3 = x_msg-MSGV3
V4 = x_msg-MSGV4
importing
msg = v_msgstr
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
write:/ v_msgstr.
endloop.
Here, the variable <b>v_msgstr</b> will be having the actual error message...
Hope it helps.
Regards,
Phani.
Message was edited by:
Sivapuram Phani Kumar -
How to get Actual Price in Purchase Order
Hello experts,
Could you suggest me what FM (or table) can be used to get value for Actual Price in Purchase Order (tcode ME23N) on tab Conditions?
I not found it in KONV table because this record does not has Condition Type.
Thanks in advance.Hi,
You can check in material master. For Table Reference, use MBEW Table. For history Table : MBEWH
Here Valuation Area is used for Plant.
Regds,
Anil -
How to get current user in Exchange 2007 OWA customization page?
Hi,all
I customize an ASPX page(smsconfig.aspx) in Exchange 2007 OWA( this file in ..\Exchange\ClientAccess\OWA\smsconfig.aspx, I don't modify registry.xml & web.config).
My Exchange 2007 OWA has been configurated with Forms-Based Auth.
https://mail.myexchange.com/owa/smsconfig.aspx The page works fine, but it cannot get current logon user with HttpContext.Current.User.Identity or
UserContext.MailboxIdentity or UserContext.LogonIdentity
<%@ Page language="c#" AutoEventWireup="false" Inherits="Microsoft.Exchange.Clients.Owa.Core.OwaPage" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<%@ Import namespace="Microsoft.Exchange.Clients"%>
<%@ Import namespace="Microsoft.Exchange.Clients.Owa.Core"%>
<%@ Import namespace="Microsoft.Exchange.Clients.Owa.Premium"%>
<%@ Import Namespace="System" %>
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.Data.SqlClient" %>
<%@ Import Namespace="System.Xml" %>
<%@ Import Namespace="System.Collections.Generic" %>
<%@ Import Namespace="System.Text" %>
<script runat="server">
。。。(my codes in here)
</script>
thanks for your help.
Your Passion.My Potential.Microsoft.Exchange.Clients.Owa.Core.OwaContext.Current.UserContext.LogonIdentity.PrimarySmtpAddress
Высказанное мною здесь - мои личные взгляды, а не позиции корпорации Microsoft. Вся информация предоставляется "как есть" без каких-либо гарантий.
Maybe you are looking for
-
Acrobat XI Pro installation failed
MacBook Pro 13" Retina OSX 10.8.5 3 GHz Intel Core i7 8 GB 1600 MHz DDR3 Used Akamai NetSession Interface. Downloaded from Adobe website. After download, clicked on installer, entered serial number, quickly went through installing until right at the
-
Considering upgrading and giving my mini to daughter. Is it possible to get an iMac configured or modified to include a serial ATA port, for faster transfer speeds with an external HD? Thanks
-
Onekey Recovery function has no effect
Hello! Today I recieved my Ideapad S12. Turned it on and configurated Windows like you do the first time you start a netbook. After that I shut down the system and wanted to try the recovery function. I pressed the arrow key and the ideapad just boot
-
JTapi call transfer / conference from Route Point
We are developing a simple call distribution application but are having problems completing the call transfer. our scenario is: Caller A calls RP DN. RP Accepts call. RP Finds appropriate agent, and places new call to agent.(Call B) Agent answers. RP
-
Mail - many functions have just stopped working
Sometime during today, Mail stopped working. I can't quit it, without Force Quitting, I can't get mail, I can't send mail, I can't open mail which is in my folders - I just get the spinning wheel. When I click on a new message, I can't get any addres