How to get Alerts mail for adapter engine errors in SAP PI 7.0

Hi Friends,
I configured Alerts in PI 7.0. with the help of t-code u2018ALRTCATDEF and created a new alert catergory.
In container tab i have mentioned all give below elements.
SXMS_MSG_GUID, SXMS_RULE_NAME, SXMS_ERROR_CAT, SXMS_ERROR_CODE, SXMS_FROM_PARTY, SXMS_FROM_SERVICE, SXMS_FROM_NAMESPACE, SXMS_FROM_INTERFACE, SXMS_TO_PARTY, SXMS_TO_SERVICE, SXMS_TO_NAMESPACE,SXMS_TO_INTERFACE
I am getting alerts when I manually test the alerts configurations by running the report u2018RSALERTTESTu2019.
I am getting mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
But When I am getting a error , I am not getting an alert mail. Right now iam doing in XI Development.
I am not getting an Alert mail , when my message is in status of : System Error . Error catergory is : XI_J2EE_ADAPTER_JDBC.
Kindly tell how to get alert mail for error catergory : XI_J2EE_ADAPTER_JDBC and in Adapter engine errors.
How to get alert mail when my message is failed with any reason in Adapter engine.
Waiting for quick replay. Please help me out.
Regards,
Ahmed.

Hi thanks for quick reply.
As per your given link : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/14877. [original link is broken]
I have done all these steps. But still little problem.
as per link he is getting Error description , error message id , alert rule..
In my case I am not getting these information. when my messages failed. When I am doing manully testing the alert getting an mail as :
Alert ID: ##00009##
Dear Administrator,
This is with respect to XI Scenario. During processing of XML file from ECC or XYZ Server, Following error has been occured:
Message ID:
Interface:
NOTE: To check the file name, go to SXMB_MONI and search for above message ID.
Double click on that message ID and click on error in left hand tree.
Please take appropriate action in co-ordination with respective functional and BASIS consultant.
Is it okay the body of mail??.
I am not getting alert mail when my messages failed in adapter engine and Integration Engine.
Ex my message is failed in AE:as below.
My messages flow as : SAP --> XI --> DB.
Messages is success (in ECC moni)> XI moni also success> XI Adapter engine getting error as (Status: System Error) and (Error Category : XI_J2EE_ADAPTER_JDBC).
Regards,
Ahmed.

Similar Messages

Alert for adapter engine error

Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachi

Moha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish

Abap tables for adapter engine errors

Hello,
Which ABAP tables in PI will have the data relating to adapter engine errors (like the communication channel errors). Is there any way I can get the adapter engine errors from abap tables?
Any help is very much appreciated.
Thanks
MLS

Hello,
What I am trying to do is write a report in ABAP, which will read the table for errors (for messages which are not processed successfully in Integration engine or adapter engine) and email those errors to users. If there is communication channel error in RWB, the message in sxmb_moni is still shown as success and is not being updated in table SXMSPERROR.
We cannot use PI Alerts here since the email list is dynamic for the same PI interface.
Any ideas on how to accomplish this?
Thanks
MLS

Reg Unable to find URL for Adapter Engine Error

Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.

Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay

How to set main host for Adapter Engine in the HA enviroment

Hi, all.
Our XI env. is like the following.
XI 3.0 SP11 on Windows 2003 + SQL Server.
Central Instance(ABAP + J2EE Addon) is running on Host A,
Dialog Instances(ABAP + J2EE Addon) are running on Host B and Host C.
Our design was to have J2EE Adapter engine mainly running on Host A(CI). But after installation, Adapter Engine is running on Host C(one of DIs). When we check from the Runtime WorkBench. It shows Adapter Engine is running on Host C while IS is running on the Host A(CI).
Where can we change this configuration? We want the J2EE AE running on the Central Instance Host.
Any advice appreciated.
Best Regards.

Hi Sejoon,
when we changed the host of XI server in one of our projects one of the things we had to change was the exchange profile entries
http://server:port/exchangeProfile/index.html
to see how your adapter engine is configured
http://server:port/sld
SLD -> Content Maintenance
then
Subset: landscape description
Class: XI Adapter Framework
buth check the exchange profile entries first
Regards,
michal

Customize email alert messages for Integration Engine Errors

Hi experts,
I've configured auto-reaction emails for alerts raised by Integration Engine in CCMS.
The email content I got is as below:
Subject: CCMS alerts PI1 20070319 140556
ALERT for PI1 \ IEngine_PI1_001 Integration Server \ Category MAPPING \ Message alerts by Error Codes at 20070319 060447 ( Time in UTC )
RED CCMS alert for monitored object Message alerts by Error Codes
Alert Text:Error code: GENERIC error text: com/sap/xi/tf/_MM_OperationPro cInfo_ODSOperationP~com.sap.ai i.utilxi.misc.api.BaseRuntimeExceptionFatal Error:
System:PI1
Segment:SAP_CCMS_ootspdbs02_PI1_01
MTE:PI1\IEngine_PI1_001 Integration Server\Category MAPPING\Message alerts by Error Codes
Client:001
User:PIAFUSER
Severity: 50
May I know how I can configure the contents of this message?
I can't seem to find them in any of the CCMS alerts settings.
Please help.
Thanks.
Ron

Hi,
Go through these links..
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
http://help.sap.com/saphelp_nw04/helpdata/en/17/550c404a435509e10000000a1550b0/content.htm
https://websmp102.sap-ag.de/monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/2a/ae8d4243a5de54e10000000a155106/frameset.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
http://help.sap.com/saphelp_nw04/helpdata/en/25/27fb1c56ff3b41a5d6807d3174d5c7/frameset.htm
regards
manoj kumar

How to Get Channel Name in Adapter Engine Alerts

Hi All,
I am using 'Alrtcatdef' and 'Rules' in RWB to generate Adapater Engine Alerts. I am aware of the standard containers that are available to compose Alert Email content.
Is there a way I can read the Channel Name(and NOT Adapter type i.e Idoc, File) that errors out, in the email content.
Channel Name is the name of the channel I proivde in Integration Directory.
Thanks,
Xier

The above requirement could have been done with custom alert container variables ..... but defining custom alert container seems not possible.
Workaround:
When you run a scenario we have a fixed set of channel(s).....sender (optional) and receiver ..... an error in the sender channel goes back to the sending application and hence XI support personnel is excluded from it.....so now what remains is the receiver channel.
So if your requirement is to include channel name for one (or few) of the scenarios then include it in the Alert message that you set in the ALRTCATDEF ..... i.e. hard-code it ...... wont be a good approach if you have to implement the same logic for all the scenarios.....
Suggested the above approach thinking it is not possible to build custom container ..... if there is a way to do it then please even let me know.
Regards,
Abhishek.

How to get the Count for no.of.errors

HI
BELOW IS MY CODE
LOOP AT I_RETURN INTO WA_RETURN.
IF WA_RETURN-TYPE ='E'.
    CONCATENATE SOURCE-AUFNR '|' SOURCE-VORNR '|'WA_RETURN-MESSAGE
                                                     INTO TEXT.
    WRITE:/ TEXT.
    COUNTER = COUNTER + 1.
ENDIF.
IM GETTING BELOW O/P
000090001366 0020 Enter another operation number
000090001366 0020 Error during processing of BAPI methods
000090001366 0050 Item categories in agreement and requisition incompatible
000090001366 0050 Error during processing of BAPI methods
NO.Of records In Error          4
My Requirement is if AUFNR and VORNR value is same then the count should be 1 , Like the o/p should be
NO.Of records In Error          2
because AUFNR and VORNR is same for 2 records , can any one tel me the logic to do this,
AUFNR and VORNR value is there in Internal Table

Hi All,
Thanks for the replies.
AUFNR and VORNR are in different tables so im putting them in one internal table
loop at itab into wtab.
    wtab-aufnr = wa_methods-objectkey.
    wtab-vornr = wa_operation-activity.
endloop.
now
IF WA_RETURN-TYPE ='E'.
now if aufnr and VORNR is same then i should get error message as said above
can any one tel me the logic

Error in gettnig logon data for Adapter Engine

Hi,
We have Http > XI > RFC Scenario. We are getting 401 unauthorized error in "CALL ADAPTER" section. From the trace its clear that the logon data for the adapter engine (there is no value for USER in trace) is not getting poulated. We fixed this issue last evening....i think by doing full cache refresh, but this problem propped up again today. Yesterday when this issue was fixed the USER has "PIISUSER" in the trace.
We haven't changed any config settings since yesterday so all the passwords and other config info is same. Not sure what's causing this issue. Below is the trace. Any help will be highly appreciated.
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.ppi.dac-sapd1</Trace>
<Trace level="3" type="T">URL = http://dac-sapd1.actv2.com:8007/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User =</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> 401 &nbsp Unauthorized</td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23">SAP J2EE Engine/7.00 </td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> Authentication did not succeed.</td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"> Details:</td> <td align="left" valign="top" height="48"><pre> No details available</pre></td> </tr> </body> </html></Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 401</Trace>

Hi,
go to the exchange profile.
there u need to maintain the password for the XIISUSER.
I think u need to restart the J2EE Engine for the changes to take effect.
Regards
Cornelius

CCMS Alerts in PI 7.1 for adapter engine

Hi Experts,
Looking for a step by step process to configure CCMS alerts for adapter engine in PI 7.1

Hi Shweta,
>>>Looking for a step by step process to configure CCMS alerts.
Please see the belog blogs, it might be helpful to you.
Part u2013 1:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Part - 2:
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Part - 3:
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Mar 22, 2011 12:58 PM

How to get alert for app server that experienced high memory and CPU utiliz

Hi
How to get alerts configured and turned u201Conu201D for the app server that experienced high memory and CPU utilization?
And let me know where we can check this?
Regards,
Neni

hi,
Have you configured a Central Monitoring System (CEN)? This includes registering the agent on the CEN, starting it and configuring the Central Auto Reactions on CEN using RZ21 transaction.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm]
Jansi

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

No_messaging_url_found: Unable to find URL for Adapter Engine

Hi,
I am facing the same problem. I have configured a RFC-File scenario.
I get the error"no_messaging_url_found: Unable to find URL for Adapter Engine af.<SID>.<server>"
and <INTERNAL.AE_DETAILS_GET_ERROR>
I get the error "no_messaging_url_found: Unable to find URL for Adapter Engine" when I execute the Function Module SAI_AE_DETAILS_GET.
This error occured in the line 235( sap_xi_adapter_services = sld_accessor->associators( iref = sap_xi_adapter_framework assocclass = 'SAP_HostedXIAdapterServi) of the FM.
The value is not filled and i get the error mentioned.
I have gone through thread and verified all the points mentioned.
I have checked SXI_CAHCE,there are no locked users in RSUSR200,
SXI_CACHE, Goto->AdapterEngine Cache, I have an entry af.<sid>.<server>
In SLD,Technical Landscape,Exchange Infrastructure I have the entry <SID>.<Server> against the Adapter Engine
But as was mentioned in the thread the line 241 of the Fucntion Module has 'adapterType' and not 'Adaptertype' as in the exchange profile.I did not try changing 'a' to 'A'.
Could you please let me know how to solve the problem.
Thanks in advance.

Hi Vani,
Check the pipeline URL in the SLD
Business System->URL
It should be
http://host:HTTPport/sap/xi/engine?type=entry
Just check this thread- may be useful-
File Adapter - Sender Problem
RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy

Error : Unable to find URL for Adapter Engine

Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
 <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xd2.host-dev</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
sai

Hi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception NO_ADAPTER_ENGINE_FOUND
Message ID: SAI_GLOBAL Message number: 016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai

How to set alert mail contain SQL text activities

How to set alert mail contain SQL text activities.
In "Notification Templates" topic have no Available Tags about sql text. Can I send mail alert with SQL text?

it should be text/plain, for a complete list refer
http://www.freeformatter.com/mime-types-list.html
Regards.

How to get Alerts mail for adapter engine errors in SAP PI 7.0

Similar Messages

Maybe you are looking for