How to get breakup of Supplier Liability A/c

Hi,
I am want to develop a report which gives breakup of Supplier Liability a/c.
Liability A/c: 01-00-00-12111-00
Supplier: abc
Invoice_number.................Invoice Date...................Invoice Amount................Remaining Amount
Sub-Total Supplier abc
Supplier: xyz
Invoice_number.................Invoice Date...................Invoice Amount................Remaining Amount
Sub-Total Supplier xyz
Report Total................................................................................................ xxxxxx
This report total should match with the Libaility a/c balance in the GL.
Regards/Prasanth

Hi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson

Similar Messages

How to get Delta ILSR : suppliers wont import

Hello, im having problems getting the k7n2 delta ilsr, the suppliers wont import it to my counrty (malaysia), any suggestions on how to get it?

Have you tried buying it online? You'll pay an arm and a leg for shipping probly which wouldn't make it worth it...
Have you tried paying anyone off like say a distributor there in your country? Give him 100 bucks *equivelent* and see what he says heheheh
Have you called around to see who may have 1 in stock there already?
Have you looked on the MSI website to see where their local CS house is or the closest one? Maybe they'll sell one directly to your local retailer...
Get creative...where there's a will there's a way!
Cheers!! 8)

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send scree

I have had Adobe XI for about two years and My harddrive just crashed. My backups were part of the failure so I can't get it back. I purchased it from a third part supplier and it was a download. I need to find out how to get it restored. I can send screen shots of all of the drive location where the drive is still good and I can see my Adobe Acrobat pro information, but the download itself is missing. NEXT STEP?

If you are talking about Reader (you did post in the Reader forum), then just download http://get.adobe.com/reader/enterprise. However Reader is free not purchasable. You can download a trial then install using your serial number, which if you didn’t register or write down somewhere you will be out of luck to track down.
Download a free trial or buy Adobe products | Adobe downloads

How to get suppliers & their bank details in R12

Hi ALL ,
Please will someone guide me how to get the suppliers with their respective bank details in R12 (with putting in consederation that i need all suppliers whther they r having bank details or not )
Thanks Alot

i checked that but i still not able to get a query which retrieves all suppliers & sippliers who has bank details it retrieves that as well
/* Formatted on 2012/01/01 02:40 (Formatter Plus v4.8.8) */
SELECT aps.vendor_id, aps.vendor_name, ieba.bank_account_name, hzp.party_id , hop_bank.ORGANIZATION_NAME , hop_branch.ORGANIZATION_NAME
FROM hz_parties hzp,
ap_suppliers aps,
-- ap_supplier_sites_all assa ,
iby_external_payees_all hepa,
iby_pmt_instr_uses_all ipiua,
iby_ext_bank_accounts ieba,
hz_parties hzp_bank,
hz_organization_profiles hop_bank,
hz_parties hzp_branch,
hz_organization_profiles hop_branch
WHERE hzp.party_id = aps.party_id
-- AND aps.vendor_id = assa.VENDOR_ID
AND hzp.party_id = hepa.payee_party_id
-- AND assa.VENDOR_SITE_ID = hepa.supplier_site_id
AND hepa.ext_payee_id = ipiua.ext_pmt_party_id(+)
AND ipiua.instrument_id = ieba.ext_bank_account_id(+)
AND ieba.bank_id = hzp_bank.party_id(+)
AND hop_bank.party_id(+) = hzp_bank.party_id
AND ieba.branch_id = hzp_branch.party_id(+)
AND hzp_branch.party_id = hop_branch.party_id(+)
-- and hzp.party_id = 14272
AND hepa.supplier_site_id IS NULL
i tried the above one but there is some suppliers who have bank account details but not retreieved dont know why

Regarding: How to get the Tax Breakup Amount using SDK

Hai Friends,
               I created one saled order . I have given Tax code (Service) then it show total amout of tax is 370.80. when i click the link button of Tax Amount field from sales order then it show the Tax Breakup Details in Separate Screen of SAP. That screen Contain following Details.
From Caption is : Define Tax Amount Distribution
      Type               Tax Parameter Code         Tax Parameter Name                Rate            Duty         Tax Amount        Base Amount
      Service           Service                            Service Tax                               12                                 360.00
      Cess_ST        Cess_ST                          Education Cess for Sevice          2                                     7.20
      HSCess_ST   HSC_ST                            HSCee for Service                      1                                     1.00
              My Doupt is :
                       How do i get the Service tax Breakup value from above grid.
                       How to get the Tax Breakup value from that SAP Screen, is it any help in SDK.
Please Help Me.
Regards,
K Sakthivel
Edited by: ksakthivel on Dec 7, 2011 10:41 AM
Edited by: ksakthivel on Dec 7, 2011 10:53 AM
Edited by: ksakthivel on Dec 7, 2011 10:54 AM

Hai Friends,
               I created one saled order . I have given Tax code (Service) then it show total amout of tax is 370.80. when i click the link button of Tax Amount field from sales order then it show the Tax Breakup Details in Separate Screen of SAP. That screen Contain following Details.
From Caption is : Define Tax Amount Distribution
      Type               Tax Parameter Code         Tax Parameter Name                Rate            Duty         Tax Amount        Base Amount
      Service           Service                            Service Tax                               12                                 360.00
      Cess_ST        Cess_ST                          Education Cess for Sevice          2                                     7.20
      HSCess_ST   HSC_ST                            HSCee for Service                      1                                     1.00
              My Doupt is :
                       How do i get the Service tax Breakup value from above grid.
                       How to get the Tax Breakup value from that SAP Screen, is it any help in SDK.
Please Help Me.
Regards,
K Sakthivel
Edited by: ksakthivel on Dec 7, 2011 10:41 AM
Edited by: ksakthivel on Dec 7, 2011 10:53 AM
Edited by: ksakthivel on Dec 7, 2011 10:54 AM

Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
If you have trouble, emai
l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
Good luck

How to get HttpServletRequest parameters from two forms in a JSP

I have this JSP with two forms calling the same servlet. Problem is, when I use a submit button in the second form, I am unable to retrieve the request parameters from the form through the servlet. I am wondering if anybody could give me some info on how to get the request parameters from the second form. I tried to see all the parameter names in the request by calling request.getParameterNames(). But the parameters in the second form are not even seen in the request although I am clicking the submit button in this form!

First, two forms works fine in one jsp so no need to argue about that.
Second, did you put the form actions and type ("multipart/formdata " ?) explicit in every form header ? Did you supply different form names ?
Try to call the submit function through javascript - document.forms[0].submit() for your first, and document.forms[1].submit() for your second form...
Did you forget to close the form tag by chance ?

Alter a BAPI Result Table, how to get into the display "loop" ?

Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !

Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank

How to get rid of the Login page in Portal?

Hi Guys,
I have a newly developed intranet portal project for my company which does not need login no more. I hope you can help me how to get rid of the login page in portal which is I know in every application you create, there should be a login. Is this possible that I can just simply type in to the URL address bar my application then it will no longer ask for any logins? Please help! Many thanks!
Russel

Hi Russel,
You can give public access to pages, applications etc. Users won't need to supply a username/password then, while you still can hide some of the pages to authorized people.
Check the access tab for pages and the manage tab for applications.

How to get rid of the SAP BPC "three globes" startup screen?

Hi,
I am trying to figure out how to get rid of the SAP BPC "three globes" startup screen when we start BPC. I do not want it to pop up.
I looked at VBA behind the workbooks but could not find anything. Could not make the sheet invisible.
Is there a way to get rid of the screen? This is the screenshot
www.flickr.com/photos/chalinka/3471310254/
Thanks!

Just found the answer on this very forum!
Re: How to change the logo, (3 Globes) on the launch page
Posted: Mar 18, 2009 12:46 PM in response to: David Fletcher Reply
OK then, now v7sp03 for microsoft has hit the shelves, you can change the logo !!!
It is quite easy.
Have the logo file ready in either BMP, GIF or JPG format.
Put it in your "Server Install -> DataWebFolders[Appset]" folder (so where you keep your files).
In ApplicationSet parameters, add the parameter COMPANY_LOGO and in the options type the name of the file you just put on the server.
Now if you restart BPC for Excel, the second excel page that pops up should be showing your new logo or graphic (mine did).
The use of the logo has been documented in the admin manual -> working with appset parameters
Some tips.
I wanted not to clutter the filesystem so i put my logo in the appsetpublications folder and added the path accordingly in the parameter (so now it reads appsetpublicationslogoname.jpg instead of just logoname.jpg).
If you do not supply a name (only the parameter), your second Excel window (normally holding the graphic) will not appear. That could be an alternative too if you find that whole thing annoying.
Hope this helps you build great BPC apps,
Edwin van Geel

How to get rid of the safari community toolbar?

How to get rid of the community toolbar in safari

That toolbar/ct plugin causes problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

How do I turn on my ipad, I just got it and I don't know how to get to the home screen. Also, is itunes free on the ipad

How do I turn on my ipad, I just got it and I don't know how to get to the homescreen. Everytime I turn it on there is a black screen, the white charger, and the blue itunes circle. Also, are itunes free.?

You must activate the iPad within iTunes on your computer. Make sure you have the latest version of iTunes on your computer (read the minimum requirements for the iPad printed on the iPad box) and connect the iPad to your computer with the supplied cable to a 2.0 USB port - not a port on a hub- a port on your computer. iTunes should start and take you through the process.
iTunes on the iPad is a store where you purchase media - it is not the music player. The iPod app is the music player. Both apps are pre installed on the iPad.

In SD, how to get address etc. for a commercial Partner via ADDNR

Hello all,
I am new to SD (and new to ABAP for that matter) so have a lot to learn. I am to write a report program to produce a list of documents containing information about commercial partners and their full address. That is to say, town, country, postal code etc... Now here is a question in three parts:
1) Where and in what table do I find address information about a commercial partner (SD module)?
2) Is there a standard function module where I can supply it with the address number and get all the address and perhaps some other info in return?
3) I tried to understand the standard SAP program (i.e. FFP2) as to how it gets the partner address and other info. But very quickly I got lost in transfers between includes, programs, screens, sub screens, function calls, etc... The program seems to read the data from some mysterious table INTO a structure and then display it on the screen. Now, for future references, how do you figure out the source of information for a screen field when the field it is mapped onto a structure and not a real table?
Your help is greatly appreciated

Hello,
With the help of ADRNR, you can go to ADRC table and get all the address information you need.
If you are trying to get address for a particular partner, then 1st get the ADRNR for that partner from VBPA and then go & check in ADRC table.
Let me know if this helps or try to be more clear about your question.
Thanks,
Suresh Ganti

Trigger how to get new and old value for nested table column?

Hi,
I have created a nested table based on the following details:
CREATE TYPE typ_item AS OBJECT --create object
(prodid NUMBER(5),
price NUMBER(7,2) )
CREATE TYPE typ_item_nst -- define nested table type
AS TABLE OF typ_item
CREATE TABLE pOrder ( -- create database table
ordid NUMBER(5),
supplier NUMBER(5),
requester NUMBER(4),
ordered DATE,
items typ_item_nst)
NESTED TABLE items STORE AS item_stor_tab
INSERT INTO pOrder
VALUES (800, 80, 8000, sysdate,
typ_item_nst (typ_item (88, 888)));
Now I would like to create a trigger on table pOrder for after insert or update or delete
and I would like to track the new and old value for the columns inside nested table.
Can anybody direct me how to do it?
I would like to know the sytax for it like:
declare
x number;
begin
x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
end;
Hope my question is clear.
Thanks,
Lavan

Hi,
Try like this:
CREATE OR REPLACE TRIGGER PORDER_I
BEFORE INSERT
ON PORDER
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
DECLARE
items_new typ_item_nst;
ordid_NEW NUMBER;
BEGIN
FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price: ' || :new.items(I).price );
END LOOP;
END;Regards,
Peter

How to get the Path of the Current File using Import & Export File -Reg.

Dear all,
I have a mega (big) doubt. I have manually inserted the Figures from the figure folders. Now i need, fully automated. So How can I get the Figure path
Example :
PMString path = "E://development/Figures/";
now i checked, How many subFolders is there in "path", get the All Subfolders and check to the Article Name.
Example
Article Name == subFolder name then get the Files from the SubFolders(E://development/Figures/ChapterF/*.eps files").
now I paste the Document using to For Loop.
Please any one can suggest me, How can We get the Path in SDK.
Note:
Should I have to create the relative path by myself?
No method supplied in SDK to do this directly?
Please I need a help of this Query as soon as posible.
Thanks & Regards
T.R.Harihara SudhaN

http://msdn.microsoft.com/workshop/author/dhtml/reference/objects/input_file.asp?frame=true
When a file is uploaded, the file name is also submitted. The path of the file is available only to the machine within the Local Machine security zone. The value property returns only the file name to machines outside the Local Machine security zone. See About URL Security Zones for more information on security zones.
i need to know on how to get the compelete path /directory of the filename
using <input type="file"> tag You can't. Its a security thing.
is there any other way to get an input file from a local host aside from <input type="file"> tag?No. Not using just html.
You could always go into activex components, but thats different again.
Cheers,
evnafets

How to get breakup of Supplier Liability A/c

Similar Messages

Maybe you are looking for