How to get correctly any non english data e.g greek data in servlet??

Hello All,
I have one textbox on form from where user will enter greek data and when i get that field data in servlet using request.getParameter("name") ,then it shows wierd text in servlet ,it ditorts all the characters that user enterd on page,how can i get greek data in servlet wothout losing it????
Please help
Thanks.

1.) Read [this excellent introduction into Unicode|http://www.joelonsoftware.com/articles/Unicode.html]. The subject is more complex than you think.
2.) Verify at each point in your program that your String contains the correct value. Note that using System.out.println() might not be helpful here, since the console might not be able to display those characters.
3.) When a String contains invalid characters, then the error already happened before! Don't try to fix it after the fact, look where the original byte[]->String transition is made and make sure that it is correct.

Similar Messages

  • How to get Correct curent time and date

    Hi,
    I would like to know whether system keeps updating SY-UZEIT each second or it contains the time value when the program was started.
    Suppose a program starts at 12:00:00 time and takes 10 sec to finish. Will I get same value of SY-UZEIT or will i get 12:00:10 as value of sy-uzeit just before completetion of program?
    If the time is not updated each second, how can I get the correct time?

    Hi surya,
    the SY-UZEIT will not be automaticly updated in the runtime.
    you have to use GET TIME.
    Here a short example to show the different:
    REPORT ZGRO_TEST.
    TABLES: MARA.
    write: / 'without get time'.
    WRITE: / SY-UZEIT.
    SELECT * FROM MARA up to 10000 rows.
    ENDSELECT.
    WRITE: / SY-UZEIT.
    write: / 'with get time'.
    get time.
    WRITE: / SY-UZEIT.
    SELECT * FROM MARA up to 10000 rows.
    ENDSELECT.
    get time.
    WRITE: / SY-UZEIT.
    regards, Dieter

  • Replacing any non english Characters

    How can I Replace any non english characters I have alot of the characters that look like a block.
    --John                                                                                                                                                                                                                   

    Probably the easiest way to code would be to convert the string to a byte array and back again using the ASCII character encoding. That should give you ? for any non ASCII characters.
    Something like;
    String newString = new String(oldString.getBytes("ASCII"), "ASCII");

  • I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    I-photo:  I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?

    Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
    If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). 

  • HT4623 I updated my iphone 4s iOS 6 however my app store is now in german.  I don't know how to get to back to english & now it won't update any of my purchases.  Please help

    I updated my iphone 4s iOS 6 however my app store is now in german.  I don't know how to get to back to english & now it won't update any of my purchases.  Please help

    I also had the same issue (I downloaded IOS6 on my Ipad in Germany, when I was travelling).  I could not get into the Settings/ITunes & App Store and log out of my account as the Apple ID was greyed out and nothing happened when I clicked on my user id.  I then had to go into iTunes and found that my user id at bottom of the screen in ITunes, click on my user id and assume that the german words meant to log out.  I then was able to log back in and English was restored in the iTunes and App store.

  • JSP - How to Truncate or replace non-english inputs ?

    Hi,
    I have a JSP form in which users needs to input certain values and those values get stored in our database. Now my concern is that many a times users from different part of geographies also input non-english values which comes as weired characters and gets stored in my database.
    I do not want non english stuffs to be stored in my database.
    What I want is that if user enters any NON-ENGLISH character then either it should get truncated or it should get replaced with its nearest matching english character.
    How can I achieve this ?
    Awaiting Help !
    Thanks

    Hey guyz..Iam awaiting ur response......is it something that not achievable....if thats so then please suggest me some way out

  • How to get the name of a Data Element of a generic Table!

    Hi guys!
    In my function i have the following import paramenter
    i_outtab type standard table
    now i import a table and i want to get the dataelement of the fields.
    is there a way to do this??

    Hello Thomas
    Perhaps the following sample report may be useful for you.
    *& Report  ZUS_SDN_RTTI_STRUCT_COMPONENTS
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145711"></a>
    *& Thread: How to get the name of a Data Element of a generic Table!
    REPORT  zus_sdn_rtti_struct_components.
    TYPE-POOLS: abap.
    TYPES: BEGIN OF ty_s_outtab.
    TYPES: bukrs    TYPE bukrs.
    TYPES: kunnr    TYPE kunnr.
    TYPES: END OF ty_s_outtab.
    DATA: gdo_data    TYPE REF TO data.
    DATA: gs_outtab   TYPE ty_s_outtab.
    DATA: go_typedescr  TYPE REF TO cl_abap_typedescr,
          go_structdescr  TYPE REF TO cl_abap_structdescr,
          go_datadescr    type ref to cl_abap_datadescr.
    DATA: gs_comp        TYPE abap_compdescr,
          gd_dtel        type string,
          gt_dfies        type ddfields.
    FIELD-SYMBOLS:
      <gs_struct> TYPE ANY.
    START-OF-SELECTION.
      BREAK-POINT.
      GET REFERENCE OF gs_outtab INTO gdo_data.
      ASSIGN gdo_data->* TO <gs_struct>.
      go_typedescr = cl_abap_typedescr=>describe_by_data( <gs_struct> ).
      go_structdescr ?= go_typedescr.
      BREAK-POINT.
      LOOP AT go_structdescr->components INTO gs_comp.
        go_datadescr = GO_STRUCTDESCR->GET_COMPONENT_TYPE( gs_comp-name ).
        gd_dtel = go_datadescr->get_relative_name( ).
        write: / syst-tabix, 'Data element =', gd_dtel.
      ENDLOOP.
    END-OF-SELECTION.
    Regards
      Uwe

  • How to get the today's julian date in java?

    how to get the today's julian date in java?
    hi can any one tell me how to get the todays julian date using Calender class or GregorianCalender class....
    Julian date for 2006.November.01 AD 05:54 PM : 2454041.0
    i have tryied with
    calJ.setGregorianChange(new Date(Long.MAX_VALUE));
    System.out.println(sdf2.format(calJ.getGregorianChange()));
    thanks
    Tushar
    Message was edited by:
    lad_tushar

    thanks a lot....for intrest....
    I have found some details about the Julian calendar as follows:
    The Julian date for 2006: JAN: 01:12:01:59 is 2453737.00138
    245 represent the year digits for year 2006
    3737 represent the date fir 1 Jan
    .00138 represents the time for 12:01:59
    Julian date change as per every day 12 noon it increase one digit in it.
    As per ref from
    http://www.aavso.org/observing/aids/jdcalendar.shtml
    Also chk this calendar where Julian date is 20. October 2006 for 02 November 2006
    As per ref from
    http://www.calendar.sk/julian_calendar-en.php
    I have tried the pure �GregorianCalendar� class from jdk1.4 API and its setGregorianChange method but not getting as per the expected Julian date format. Using the �setGregorianChange()� i have setting the cutover date to Long.MAX_VALUE it means GregorianCalendar now have to act as per the Julian calendar ...so after setting the cutover date it return me changed date using �getGregorianChange()� but that was not the Julian date of the current date...as expected or as per above both scenario. Even though the last two digits are nowhere equal to the actual Julian date.
    Program
    GregorianCalendar cal = new GregorianCalendar();
    cal.setGregorianChange(new Date(Long.MAX_VALUE)); // setting the calendar to act as a pure Julian calendar.
    // cal.set(Calendar.DATE, new Date().getDate()); // seting the current date
    // Date todayJD = cal.getGregorianChange(); // getting the changed date after the setGregorianChange
    Date todayJD = cal.getTime(); // getting the calculated time of today�s Julian date
    SimpleDateFormat sdfJulianDate = new SimpleDateFormat("yyDDD");
    SimpleDateFormat sdfJuliandayOfYear = new SimpleDateFormat("DDD");
    System.out.println("today Date = " + new Date());
    System.out.println("Today as julian date = " + sdfJulianDate.format(todayJD));
    System.out.println("Today as day of year = " + sdfJuliandayOfYear.format(todayJD));
    OUTPUT:
    USING : Date todayJD = cal.getGregorianChange();
    Today Date = Thu Nov 02 15:17:05 IST 2006
    Today as julian date = 94229
    Today as day of year = 229
    USING : cal.set(Calendar.DATE, new Date().getDate());
    Today Date = Thu Nov 02 15:19:22 IST 2006
    Today as julian date = 06319
    Today as day of year = 319
    USING : Date todayJD = cal.getTime();
    Today Date = Thu Nov 02 15:17:59 IST 2006
    Today as julian date = 06306
    Today as day of year = 306
    There is one another concept i found to get the Julian day of the year as per the Julian day chart mention on nasa site (http://angler.larc.nasa.gov/armsgp/JulianDayChart.html) and i m getting the moth of the year that is 306 for nov 02 2006 using getTime() method in above code then the out put is right for Julian day. But it was not as per the expected Julian date format. So in conclusion we can only able to retrieve the day of year for the Julian calendar. hope their will be a solution for this problem in java api ....else we allways have to depend upon the third party api that was not accepteble some times.....
    Kindly chk chart on the site
    http://angler.larc.nasa.gov/armsgp/JulianDayChart.html
    http://weather.uwaterloo.ca/julian.html
    http://www.fs.fed.us/raws/book/julian.shtml
    Thanks,
    Tushar Lad

  • How can the symbol and non-English diacritical marking, etc accessed with combinations of letters and functional keys prior to Snow Leopard be achieved in Snow Leopard?

    How can the symbol and non-English diacritical marking/punctuation pallet, available in pre-Snow Leopard OSes with various combinations of letter or number keys and functional keys, be accessed in Snow Leopard?  Those pre-Snow Leopard versions worked on the fly as one was making text in any pedestrian application and its native font (Mail, Text Edit, for example).  One didn't need to dig around in font libraries, change font preferences, etc.

    > One didn't need to dig around in font libraries, change font
    > preferences, etc.
    It hasn't worked like that since the Early Chalcolithic (ie, System 7 or thereabouts).
    You've already got plenty of answers. Briefly (and grossly oversimplified),
    - Mac OS X conforms to a standard known as Unicode; in its current incarnation, it defines over 100k characters.
    - A keypress is translated into a character according to the current keyboard layout.
    - The graphic representation of a character (ie, glyph), is provided by the current font.
    - If a font lacks a glyph for the requested character, either another font will be automatically chosen (Mac OS X text engine), or some form of feedback (empty box, question mark, etc) will be used.
    - To inspect the actual key codes, use a utility such as Key Codes.
    - To inspect the current keyboard layout, invoke Keyboard Viewer.
    - To inspect the full complement of glyphs of a font, invoke Character Viewer (also accessed with the Special Characters command).
    (Remember that both these utilities are resizable and zoomable -- you can enlarge them to a comfortable viewing size, then zoom out to see more of the screen for your original task.)
    - For a more detailed look, use a utility such as UnicodeChecker.
    - The default keyboard layout depends on your Mac OS X localisation.
    (Keep in mind that there's no need to stick with the default layout; choose whichever one makes sense to you, given your language, habits, and proclivities. Mac OS X comes bundled with quite a few, including some obviously designed for the huddled masses of refugees from the Dark Side, who, in their wretched ignorance, have the unmitigated gall of labelling our native ways "really uncomfortable". Oh well, this, too, shall pass.
    If none of the supplied keyboard layouts fits your needs -- if, for instance, you write your emails in Etruscan -- go out on the 'net, you'll find quite a few. Or write your own with Ukulele, it's not really all that difficult.)
    - Use Keyboard Viewer to familiarise yourself with the current layout and to enter the odd character; but, to be proficient, you should learn your layout to the point that KV is no longer needed.
    - Use Character Viewer to enter the odd character not available in the current keyboard layout.
    Neither Keyboard Viewer nor Character Viewer are effective tools for more extensive needs, eg, for writing and editing bilingual or multilingual texts. In such a case, you should enable the respective keyboard layouts and switch between them with a keyboard shortcut.
    A few interesting layouts bundled with Mac OS X have already been mentioned. Let me add three.
    - Dvorak: several layouts based on the Dvorak keyboard. It is claimed that the latter is more productive and lessens RSI risk.
    - US Extended: based on QWERTY, it offers a more extensive set of diacritics (eg, caron, breve) via dead keys.
    - Unicode Hex Input: also based QWERTY, it allows input by Unicode codepoint (in hexadecimal), so it's the most extensive layout of all; eg, to enter the character "Parenthesized Number Twelve" (U+247F), hold down Option, type "247f", release Option.

  • How to get pivot table by using dates

    Hi,
    How to get pivot table by using dates in column.
    Below is the sample table and its value is given.
    create table sample1
    Order_DATE       DATE,
    order_CODE       NUMBER,
    Order_COUNT   NUMBER
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
    Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
    select * from sample1;So how to get the data like below.
              order_date
    order_code 30-sep-12 29-sep-12
    1 232 368
    2 935 1380
    3 43 133
    4 5713 7109
    5 11345 14336

    Using the extra data I inserted in my previous reply:select ORDER_CODE,
    SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
    SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
    SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
    SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
    SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
    SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
    SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
    SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
    SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
    SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
    SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
    SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
    from SAMPLE1
    where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
    group by order_code
    order by order_code;
    ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG   SEP   OCT NOV DEC
             1   0   0   0   0   0   0   0   0   600   600   0   0
             2   0   0   0   0   0   0   0   0  2315  2315   0   0
             3   0   0   0   0   0   0   0   0   176   176   0   0
             4   0   0   0   0   0   0   0   0 12822 12822   0   0
             5   0   0   0   0   0   0   0   0 25682 25682   0   0Now a bit of explanation.
    1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
    2) I use the WHERE clause to get just the data for this year
    3) With EXTRACT, I get just the month without the year.
    4) Using DECODE, I put every month's data into the correct column
    5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month.

  • How to get fiscal period based on date and Fiscal year?

    Hi Guys,
               Can anybody tell me how to get Fiscal period based on date and Fiscal Year or fiscal year variant?
    Thanks,
    Gopi.

    Hi,
    Please refer the code below:
    *: Report:  ZFISCALYR                                                  :
    *: Date  :  2004                                                       :
    *: Description: Demonstrates how to return the corresponding fiscal    :
    *:              year and posting period for a company code and posting :
    *:              date or posting date and fiscal year variant.          :
    REPORT  zfiscalyr NO STANDARD PAGE HEADING.
    TABLES: ekko.
    PARAMETERS:     p_bukrs TYPE ekko-bukrs,
                    p_bedat TYPE ekko-bedat.
    DATA: gd_fiscalyr  TYPE bapi0002_4-fiscal_year,
          gd_fiscalp   TYPE bapi0002_4-fiscal_period.
    DATA: gd_fiscalyr2 TYPE T009B-BDATJ,
          gd_fiscalp2  TYPE bapi0002_4-fiscal_period.
    DATA: gd_periv     TYPE t009-periv.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    * get fiscal year and period - (requires date and company code)
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          companycodeid = p_bukrs
          posting_date  = p_bedat
        IMPORTING
          fiscal_year   = gd_fiscalyr
          fiscal_period = gd_fiscalp.
    * Alternative fiscal year function module
    * - (requires date and fiscal year variant code from T009 table)
    * gets first entry in fiscal year variant table (will need to choose
    * correct one from table rather than just using first entry)
      SELECT SINGLE periv
        FROM t009
        INTO gd_periv.
    * get fiscal year and period
      CALL FUNCTION 'DETERMINE_PERIOD'
        EXPORTING
          date                      = p_bedat
    *    PERIOD_IN                 = '000'
          version                   = gd_periv
       IMPORTING
          period                    = gd_fiscalp2
          year                      = gd_fiscalyr2
       EXCEPTIONS
          period_in_not_valid       = 1
          period_not_assigned       = 2
          version_undefined         = 3
          OTHERS                    = 4.
    *END-OF-SELECTION.
    END-OF-SELECTION.
      WRITE:/ 'From function module: BAPI_COMPANYCODE_GET_PERIOD',
            / 'Fiscal year is:', gd_fiscalyr,
            / 'Fiscal period is:', gd_fiscalp.
      SKIP.
      WRITE:/ 'From function module: DETERMINE_PERIOD',
            / 'Fiscal year is:', gd_fiscalyr2,
            / 'Fiscal period is:', gd_fiscalp2.
    Thanks,
    Sriram Ponna.
    Edited by: Sriram Ponna on Apr 17, 2008 8:59 PM

  • How to get maximal value from the data/class for show in Map legend

    I make WAD report that using Map Web Item.
    I devide to four (4) classes for legend (Generate_Breaks).
    I want to change default value for the class by javascript and for this,
    I need to get maximal value from the class.
    How to get maximal value from the data/class.
    please give me solution for my problem.
    Many Thx
    Eddy Utomo

    use this to get the following End_date
    <?following-sibling::../END_DATE?>
    Try this
    <?for-each:/ROOT/ROW?>
    ==================
    Current StartDate <?START_DATE?>
    Current End Date <?END_DATE?>
    Next Start Date <?following-sibling::ROW/END_DATE?>
    Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
    ================
    <?end for-each?>
    o/p
    ==================
    Current StartDate 01-01-1980
    Current End Date 01-01-1988
    Next Start Date 01-01-1990
    Previous End Date
    ================
    ==================
    Current StartDate 01-01-1988
    Current End Date 01-01-1990
    Next Start Date 01-01-2005
    Previous End Date 01-01-1988
    ================
    ==================
    Current StartDate 01-01-2000
    Current End Date 01-01-2005
    Next Start Date
    Previous End Date 01

  • How to get internal table from SAP Data Provider C#

    Hello.
    ABAP:
       DATA: lt_t001 TYPE TABLE OF t001.
       DATA: url(1000) TYPE c.
      SELECT * INTO TABLE lt_t001 FROM t001.
      CALL FUNCTION 'DP_CREATE_URL'
        EXPORTING
          type                 = 'APPLICATION'
          subtype           = 'X-R3TABLE'
        TABLES
          data                 = lt_t001
        CHANGING
          url                    = url
        EXCEPTIONS
          OTHERS           = 4.
    C#:
    using SAPDataProvider;
    using SAPTableFactoryCtrl;
    public void SetDataFromUrl(string url)
                SAPDataProviderClass p = new SAPDataProviderClass();
                p.SetDataFromURL("APPLICATION", "X-R3TABLE", url);
                ISapDPR3Table tbl = p.GetDataAsR3Table("APPLICATION", "X-R3TABLE");
                SAPTableFactoryClass tf = new SAPTableFactoryClass();
                Table tb = (Table)tf.NewTable();
                tb.ISAPrfcITab = tbl.DataTable; // Exception !!!!!!
    How to get internal table from SAP Data Provider ?

    Hi Sergey,
    I'm trying to do the same, have you found a solution to solved it?
    thanks for your help.
    Regards.
    Jonathan

  • How to get the difference of two dates in years,months and days

    Hi friends,
    how to get the difference of two dates in years,months and days
    for ex 2 years 3 months 13 days
    select (sysdate-date_Start) from per_periods_of_service
    thanks

    Something like this...
    SQL> ed
    Wrote file afiedt.buf
      1  with t as (select to_date('17-nov-2006','dd-mon-yyyy') as c_start_date, to_date('21-jan-2008','dd-mon-yyyy') as c_end_date from dual union all
      2             select to_date('21-nov-2006','dd-mon-yyyy'), to_date('17-feb-2008','dd-mon-yyyy') from dual union all
      3             select to_date('21-jun-2006','dd-mon-yyyy'), to_date('17-jul-2008','dd-mon-yyyy') from dual
      4             )
      5  -- end of test data
      6  select c_start_date, c_end_date
      7        ,trunc(months_between(c_end_date, c_start_date) / 12) as yrs
      8        ,trunc(mod(months_between(c_end_date, c_start_date), 12)) as mnths
      9        ,trunc(c_end_date - add_months(c_start_date, trunc(months_between(c_end_date, c_start_date)))) as dys
    10* from t
    SQL> /
    C_START_D C_END_DAT        YRS      MNTHS        DYS
    17-NOV-06 21-JAN-08          1          2          4
    21-NOV-06 17-FEB-08          1          2         27
    21-JUN-06 17-JUL-08          2          0         26
    SQL>But, don't forget that different months have different numbers of days, and leap years can effect it too.

  • How to get a time part from Date datatype

    Hi,
    I would like to know how to extract the timestamp alone from DATE datatype? If my input is '27-SEP-2011 23:59:00' I need the output as 23:59:00. I am surprised to see that there are no in-built functions for this or may be I am wrong. Basically I need to remove the date part from DATE data type and get the time.Please assist.
    -Thanks
    Edited by: user9546145 on Sep 27, 2011 2:24 PM
    Edited by: user9546145 on Sep 27, 2011 2:25 PM

    Hi,
    user9546145 wrote:
    Hi,
    I would like to know how to extract the timestamp alone from DATE datatype? Be careful! In Oracle, TIMESTAMP means a datatype, similar to but distinct from DATE. You'll avoid confusion if you don't use the word "timestamp" to mean anything else.
    There is a built-in function, TO_CHAR:
    TO_CHAR (dt_col, 'HH24:MI:SS')Depending on how you plan to use the time, TRUNC is another handy built-in function:
    dt_col - TRUNC (dt_col)is a NUMBER (not less than 0, but less than 1) which is suitable for many tasks, such as finding the average time.
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using.

Maybe you are looking for