How to get count of all records of all entities in CRM Online
Hi,
I want to get count of all records entitywise in dynamics CRM 2013 online. I know we can count the records in CRM on-premise using a SQL query in report. Earlier I wrote a SSRS report to count the records in a CRM entity wise as displayed in
the screenshot below..
Can someone suggest me a good approach to implement the same in CRM Online.
Thanks
Pratibha Singh
Hello,
In a CRM Online environment, you need to create reports based on Fetch XML. Take a look at this link to create a Fetch XML query with aggregates: https://msdn.microsoft.com/en-us/library/gg309565.aspx?f=255&MSPPError=-2147217396#count .
Here is an example to create a report in an online environment: http://edwardsdna.com/2012/12/03/crmonline-report/
Hope it helps,
Kind regards
Similar Messages
-
How to get count of records inserted and errored out in an email
Hi
I have following question
I want to send report statics of scenario i.e Number of rows inserted during the scenario and
Number of rows in error in the scenario in an email.Here in my scenario I am trying to insert data into Essbase database and when i try to use getNbInserts() and getNbErrors functions of ODI in an email body,its giving zero value even though there 140 records inserted and 10 errored out.Can any one let me know how we get this number of records inserted and number of records errored in email.
Thanks in advance
Regards
BajiHi
I have following question
I want to send report statics of scenario i.e Number of rows inserted during the scenario and
Number of rows in error in the scenario in an email.Here in my scenario I am trying to insert data into Essbase database and when i try to use getNbInserts() and getNbErrors functions of ODI in an email body,its giving zero value even though there 140 records inserted and 10 errored out.Can any one let me know how we get this number of records inserted and number of records errored in email.
Thanks in advance
Regards
Baji -
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to get count of rows for a table?
Hi,
How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
Regards,
DevashishHi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson -
How to get count,index and compare to arraylists
hi
how to get count,index and comparing of 2 arraylist.... plz suggest me asap...How is your question related to JDBC? And what have you done so far with your code?
-
How to get Portal Login User and Its Related BP in CRM?
Hi,
An ABAP Webdynpro program is called in CRM from Portal user by a portal link. How to get the user ID and its related BP in CRM? Thanks!
The portal is integrated with ECC, and all users and BPs are maintained in ECC then replicated to CRM.
Best regards,
HaoHi,
Try the below code
IUserFactory userfact=UMFactory.getUserFactory();
IUser user=userfact.getUserByUniqueName(request.getUser().getUserId());
String usrid=user.getUniqueName();
And also you can get the groups assigned to user by using the below code
Iterator groups = user.getParentGroups(true);
while (groups.hasNext()) {
String groupstr = (String) groups.next();
IGroup g = UMFactory.getGroupFactory().getGroup(groupstr);
response.write("Group name "g.getUniqueName()"<br>");
Regards
Suresh -
How to get count as 0 for records not in table
Hi All,
I have requirement where I need count of records in the table based on ids. Example query below
SELECT empid ,
nvl(COUNT(id), 0) empcount
FROM employee
WHERE empid IN(1, 2, 4, 5)
GROUP BY empid
In the table only record for "empid=2" is present so I get count 1 for it. But with it I should get count as 0 for non existing records. Expecting below output
empid | empcount
1 | 0
2 | 1
4 | 0
5 | 0
Appreciate your help and Thanks in advance.
Regards.
Ashishe.g.
SQL> select column_value deptno, count (deptno)
from emp, table (sys.odcinumberlist (10, 20, 100))
where deptno(+) = column_value
group by column_value
DEPTNO COUNT(DEPTNO)
10 3
20 5
100 0
3 rows selected. -
How to get large no of records from adf table
Hi All,
I'm working on adf.I'm using jdeveloper 11.1.1.5 version.In my adf application i have 1000 records in my adf table.I want to get the 500 selected records from that table at a time.But im not able to get huge number of records.How can i get the records from adf table.Please give me ur valuable suggestions.
Thanks!Hi.
for large record check the oficial doc.
http://docs.oracle.com/cd/E24382_01/web.1112/e16182/bcadvvo.htm#CEGDBJEJ
PAGE_RANGING is the best option for large tables.
and these maybe will help you
Re: Performance scrolling large ADF tables
Re: Expert opinion needed: Best practices to handle huge rowsets on UI -
How to get COUNT of Invoice No and Sales Order No from Multiprovider
Hello Guys,
I have a scenario like below. I have 2 info cubes (1) Billing Item Info cube (2) Sales Order Item Infocube which stores Item level data in infocube. I created Multiprovider for these Sales Order Item Cube and Billing Item Info cube.
Now in My Multiprovider, Invoice No and Sales Order No gets repeated no of times because one Invoice and One order will have no of Materials. I have a requirement to count Total No of Billing Document and Total No of Sales Document for a Day in the BEx Report. I was thinking to use COUNT function but if Sales Document or Billing Document gets repeated then it will count those records which i don't want. correct me if i am wrong.
How to get Total no of Billing Document and Total no of Sales Document from a Multiprovider where i have Item level data is stored ?
Regards,
Komik Shah
Edited by: Komik Shah on Aug 20, 2011 5:33 PMHi,
Count can be achieved as per the following document. Create for Billing Doc and Sales Doc separately.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Regards,
Suman -
How to get the number of records of a streaming result set
Hi guys.
So if it wasn't a streaming result set, I would have done this:
{noformat}myResultSet<code class="jive-code jive-java">.last();
{color:navy}*int*{color} numResults = </code>myResultSet<code class="jive-code jive-java">.getRow();
</code>myResultSet<code class="jive-code jive-java">.beforeFirst();
</code>{noformat}
but being a streaming result set, beforeFirst() throws an exception...
So how do you get the number of records in that result set? I wanna avoid an extra count(*) query, so I would appreciate other solutions than that.JoachimSauer wrote:
vanwil wrote:
you see, for now I just use a count(*) query to get the number of records, but that's adding a lot of extra waiting time...Iterating over the result twice will surely be slower then doing the count(*).great! so what I got now is actually the fastest way there is... awesome...
If you get an exception, then you surely have a stack trace. That should tell you what happens, or at least where.com.mysql.jdbc.MysqlIO.checkForOutstandingStreamingData(MysqlIO.java:2066)
Why do you need to know the number of elements beforehand, anyway?I need to know the number of elements because the incoming data goes into a table. Now of course, I could use ArrayList<String[]> or something, but wouldn't that require more memory resources than Object[][] ?
No one can tell you that, at least not without more information (say, the stack trace for example).Here's the exception message:
java.sql.SQLException: Streaming result set com.mysql.jdbc.RowDataDynamic@10c0ef2 is still active. Only one streaming result set may be open and in use per-connection. Ensure that you have called .close() on any active result sets before attempting more queries. -
How to get count of a resultSet?
Hi, everyone,
Could anybody please tell me how to get the count of how many records in a resultSet? I went through the Java API for ResultSet, there is no such method in it.
Thanks.Hi,
I personnally simply use an INT variable which I increment during the loop, something like this :
int nbRows = 0;
while (rs.next()) {
// do your rs.getXXX stuff here
nbRows++;
System.out.println("Total Nr of rows : "+nbRows);
nbRows++. But there might be another better method for this ?
You could also use an SQL Request like select count(*) or something, but this would be too much expensive for the performance (an additional statement, Result Set, SQL Query etc...).
Hope this helps
Alan -
How to get count for missing month
I created a view as follows:
CREATE OR REPLACE FORCE VIEW "Vinfection1" ("MONTH", "COUNT") AS
select "MONTH","COUNT" from (
select to_char(s.pdate,'Mon-yyyy') as month, count(*) as count
from surproc s, diagnosis_surproc d
where s.surprocid = d.surprocid and d.diagnosisid in ('506', '507', '508', '509', '510')
group by to_char(pdate,'Mon-yyyy'))
order by to_date(month,'Mon-yyyy')
Some months are missing in the view. I want to put that month and 0 in the view. How to do it?
Thanks,
JenniferHi, Jennifer,
You need to outer-join to some table or result set (such as all_months, below) that has one roe per month.
Here's one way:
CREATE OR REPLACE FORCE VIEW Vinfection1 (month, month_s, cnt) AS
WITH all_months AS
SELECT ADD_MONTHS (first_month, LEVEL - 1) AS month
FROM (
SELECT TRUNC (MIN (pdate), 'MONTH') AS first_month
, TRUNC (MAX (pdate), 'MONTH') AS last_month
FROM surproc
CONNECT BY LEVEL <= 1 + MONTHS_NETWEEN (last_month, first_month)
SELECT a.month
, TO_CHAR (a.month, 'Mon-yyyy') AS month_s
, COUNT (*) AS cnt
FROM all_months a
LEFT OUTER JOIN ( surproc s
JOIN diagnosis_surproc d ON s.surprocid = d.surprocid
AND d.diagnosisid IN ('506', '507', '508', '509', '510')
) ON a.month = TRUNC (s.pdate)
GROUP BY a.month
/Avoid table- and column names that are non-standatrd (such as names that need double-quotes), or are built-in function names (such as COUNT).
Don't use ORDER BY in a view. Almost anything you do with the view will cause the ordering to be lost anyway.
Even if you do have an ORDER BY clause in the view, you'll often want to ORDER BY month. Rather than call TO_DATE whenever you need to sort, I suggest having two month columns; month (whcih is a DATE) for sorting, filtering and joining, and month_s (whcih is a VARCHAR2) for displaying.
Use ANSI join syntax, especiallly for outer joins.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using.
Edited by: Frank Kulash on Mar 20, 2012 12:03 PM
Added outer join condition -
How i get old history of record
hi master
sir
My need is how I get the record insert, change, delete date and data
Such as I insert record
Acid date amount
1012 01-12-2006 45824
user change this record after week but not change the date change only acid and amount
Acid date amount
2312 01-12-2006 428276
how I get information when user change and what old data
2.
which record user delete and when he delete my management need full history of data activities
please give me idea how I get old history
thank’s
aamirYes. Oracle does keep track of records but in a different way. It saves the redo information in redo logs so that it can recover the database in case of crash.
It also keeps undo information in separate tablespace in case you rollback your transaction.
But... this is not what I would call maintaining history.
Moving ahead, these redo logs are archived to another location if you have archiving enabled.
You can use log miner to mine through these archived logs but I doubt if any human would have patience to go through all those archive logs that are generated frequently, just to track the updates/deletes done.
For me, adding a trigger is much simpler. -
How to get last row and sum of all columns in one query
Hi ,
is there a way to get last record for a column and sum of all record for another column in the same query.
Best Regards ,You should define your requirements properly for volunteers to help here..
Your data is not good enough to provide you accurate solution. Reason being you dont have a proper column which differentiates between first and last entry.
The solution becomes easy based on your desgin.
I have introduced a grouping column called "id" and a time column called "time_of_insert" (only this way you can confidently say that you can differentiate between first and last (also a fool proof solution) --- you may optionally use sequence(instead of date though if you say you may end up inserting two rows at the same time, then probably sequence would be a better choice to differentiate rather than a timestamp field) etc...)
With your sample data something like this can be done to achieve your desired result.
WITH dataset AS
(SELECT 1 id,10 used, 8 remain,systimestamp+1/24 time_of_insert FROM DUAL
UNION ALL
SELECT 1 id, 1, 7,systimestamp+2/24 FROM DUAL
UNION ALL
SELECT 1 id,2, 5,systimestamp+3/24 FROM DUAL
UNION ALL
SELECT 1 id,1, 0,systimestamp+4/24 FROM DUAL
UNION ALL
SELECT 1 id,0, 0,systimestamp+5/24 FROM DUAL
UNION ALL
SELECT 1 id,1, 4,systimestamp+6/24 FROM DUAL)
SELECT *
FROM (SELECT SUM (used) OVER () sum_all,
FIRST_VALUE (remain)
OVER (PARTITION BY id ORDER BY time_of_insert DESC)
last_row
FROM dataset)
WHERE ROWNUM = 1;
Output:
SUM_ALL LAST_ROW
15 4
Cheers,
Manik. -
How to get or show multiple record data pagewise using JSPBean and HTML
Hi ,
I am using JSP bean for getting the data from database and html toe present the data.
The problem is when the user inputs data
in the search field and clicks on Search button ,i need to get all matching rows fromw the database ,which i am already getting.
Now if i have got suppose 100 rows i need to show 6 recrods on each page the rest should be shown when the user clicks NEXT or PREV buttons.
example
Name: input data here
Description: input data here
SEARCH Button
Show here the first 6 records
PREV 1 2 3 4 5..... NEXT
The page will look somewhat like this.
So the rows will be shown just below the search fields .If i am getting more than 6 record i should show PREV and NEXT with the number for each page holding 6 records.
Have anybody worked on such thing can you help me out .
ThanksHi This may help, Previous does not work properly, coz I didnt find much difficult to code so you can build on your own from Next option logic
Here is the code. Here and there couple of probs exist but they are solvable easily,
<HTML>
<%@ page language="java"
import="
java.util.* "
%>
<%!
Vector customers;
%>
<%!
void dummyMethod()
customers = new Vector();
for (int i=0;i<30;++i)
// Prints only one time when browser opened first time.
System.out.println("I:"+i);
customers.add(i+"");
%>
<body>
<script language=JavaScript>
function getNextRows(begin,end)
document.frmPage.begin.value = begin;
document.frmPage.end.value = end;
document.frmPage.which.value = "next";
document.frmPage.action = "getRows.jsp";
document.frmPage.method="post";
document.frmPage.submit();
function getPrevRows(begin,end)
document.frmPage.begin.value = begin;
document.frmPage.end.value = end;
document.frmPage.which.value = "prev";
document.frmPage.action = "getRows.jsp";
document.frmPage.method="post";
document.frmPage.submit();
</script>
</body>
<%! int x = 0; %>
<HEAD>
<TITLE>Customer Account Information</TITLE>
<META HTTP-EQUIV="Expires" CONTENT="0">
</HEAD>
<BODY BGCOLOR = "#FFFFFF" >
<form name=frmPage>
<input type=hidden name="begin" value="0">
<input type=hidden name="end" value="10">
<input type=hidden name="which" value="">
<H2 ALIGN="CENTER"><FONT COLOR="#000099">Customer Account Information</FONT></H2>
<H2><FONT COLOR="#000099"></FONT></H2>
<P>
<TABLE BORDER="1" cellpadding="0" cellspacing="0" WIDTH="80%" ALIGN="CENTER">
<TR>
<TD WIDTH="10%" BGCOLOR="#CCCCFF"><FONT FACE="Italic">Acct# </FONT> </TD>
</TR>
<%
int begin = Integer.parseInt((request.getParameter("begin")==null)?"0":request.getParameter("begin"));
int end = Integer.parseInt((request.getParameter("end")==null)?"10":request.getParameter("end"));
int max=0;
if (request.getSession(false).isNew() ||
request.getSession(false) == null)
dummyMethod();
max = customers.size();
String which = (request.getParameter("which")==null)?"next":request.getParameter("which");
if (which.equals("next"))
for (x = begin; x < max && x <= end; ++x)
out.println("<TR>"+
"<TD WIDTH='50%' BGCOLOR='#CCFFCC'>"+customers.elementAt(x)+"</TD>"+
"</TR>");
begin = end;
end +=10;
else
for (x=begin; x <max &&x <= end; --x)
out.println("<TR>"+
"<TD WIDTH='50%' BGCOLOR='#CCFFCC'>"+customers.elementAt(x)+"</TD>"+
"</TR>");
end = begin;
begin -=10;
%>
</TABLE>
<%
if (begin == max)
out.println("<tr><td>Next <a href='javascript:getPrevRows("+begin+","+end+")'>Previous </a></td></tr>");
else
out.println("<tr><td><a href='javascript:getNextRows("+begin+","+end+")'>Next </a></td></tr>");
%>
</BODY>
</HTML>
Maybe you are looking for
-
Start workflow from DAM-folder
Hi, is it possible to declare a workflow model so that it is possible to start it by selecting the folder in the DAM rather than the DamAssets? The case is that we would like to add properties to all assets in the selected folder, a variant of the Bu
-
I think I set up my media card correctly so that all photos (and any other data) reside there. How can I verify that? Thanks Solved! Go to Solution.
-
P100-115 linux / gpu question
Yesterday i installed suse 10.1 on my P100-115 (T2300,nvidia 7600 ). Install went smothly and everything works. But after a while i noticed that the fan on the left side never spins (i guess it is for graphics card). I tought that nvidia driver will
-
hi, My customer need Crystal report 2008, so please any one tell me about licencing ,cost and where i get regards srinu
-
Need help with having a signature
Ok admittedly I haven't a Dickee bird or for that matter a clue as to how to write a signature for my posts? Have looked through everything and am stumped. Please help