How to get full SOAP message in WebService
hi,
Is it possible to get SOAP message while Request operation during transaction in WebService.
I tried with Handler, while retreiving message it is having a MessageContext. How to initilize that like example
public boolean handleRequest(MessageContext mc) {
SOAPMessageContext messageContext = (SOAPMessageContext) mc;
System.out.println("** Request: "+ messageContext.getMessage().toString());
return true;
}while i make a class called SoapHdlr i have implemented all methods including the above.
In that from my class if i want to call the above method i need to pass MessageContext how to give that MessageContext or any other ways to get SOAPMessage fully.
plz can any one guide me there
ThanKQ
I think, there are some concepts missunderstood. First if you use JAX-WS- Metro framework, this kind of handlers will work. Also you should identify your SOAPHandler for your web service. For ex: in Netbeans 6, you can right click on service and select configure handlers. Then you decide your handler.
Then automatically, Metro framework directs SOAPMessages to your SOAPHandler to handle full SOAPs. HandleMessage() method will work.
If you have problem again, just ask.
Similar Messages
-
How to get full SOAP message sent from XI to web srvice
Hi guys!
In my scenario IDoc->XI->SOAP I need to see the SOAP message, which arrives into target web service. Where can I see it? I suppose in sxmb monitor, but which part? I can not find it...
Thanx, OlianIn MONi you will only be able to see the XML payload or rather the SOAP Body.
If you want to see the entire HTTP post message used by the SOAP adapter will the SOAP Enevlope you need to use either,
1. The TCP Gateway as shown in Stefan's Blog
or,
2. Follow the instructions in this thread. You would need to turn on Synch Logging in the Visual Admin for this though,
Monitoring SOAP Message Payload
I would suggest you follow Stefan's blog as it is quite simple rather than turning on Synch Logging in the Va.
Regards
Bhavesh -
How to send a SOAP message with attachments
How to send a SOAP message with attachments thru webservice using axis-1_3 can any one sujjest.............................
Please refer
http://www.javaworld.com/javaworld/jw-09-2003/jw-0912-webservices.html
http://xml.sys-con.com/read/40315.htm -
HT4061 how to get full info about the iphone by putting the imei number in pc
how to get full info about the iphone by putting the imei number in pc
https://discussions.apple.com/message/23921736#23921736
-
How to get custom defined messages in WAD
Hi
can you please help me how to get customized error messages in WAD.
While I'm executing in RSRT the customer exit variable throws error message saying that 'No Sales orders exist for this Sold_To Party' but when I execute same query using Bex WAD, then no error message throwing for me for given sold_to party. I tried with all options as given in below code, but WAD gives me system error that "No values found for the customer exit variable 'Zxxxx'. Please help me in this regard. Should I do any settings in WAD to get custom defined messages. Kindly let me know
my code is as below
I_STEP = 2.
CASE i_vnam.
WHEN 'Custome exit variable'.
IF sy-subrc = 0.
ELSE.
MESSAGE e060(/bmc/bw). "No Authorization exist
g_errflag1 = 'X'.
exit.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = '/bmc/bw'
i_type = c_e "'E'
i_number = '061'
i_msgv2 = l_msgv2.
RAISE NO_REPLACEMENT.
l_s_range-low = g_soldto.
l_s_range-sign = c_sign_i.
l_s_range-opt = c_range_opt_eq.
APPEND l_s_range TO e_t_range.
ENDIF.
I_STEP = 3.
READ TABLE i_t_var_range INTO w_s_var_range
WITH KEY vnam = 'customer exit variabel'.
IF sy-subrc = 0.
Check the flag and throw message 'No Sales orders'.
IF g_errflag1 = 'X'.
l_msgv1 = 'No Sales orders'.
Call the FM to populate message
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
i_class = c_r9
i_type = c_e "'E'
i_number = c_000
i_msgv1 = l_msgv1
EXCEPTIONS
dummy = 0
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
RAISE NO_REPLACEMENT..
ENDIF.
Thanks & Regards
siluHi
Custom Messages WAD -
How to get full file path while uploading a file in flex Applications
How to get full file path while uploading a file in flex applications.
FileReference Object is giving file name and other details but not the actual path.
Is there any workaround to to get the file path?.
ThanksWhy not ask in the Flex forum; it is more likely that someone over there knows.
-
Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Jsuser12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein -
How to get full screen caller pic in ios 7.1
How to get full screen caller pic in ios 7.1.Please help me
Haha .. I have seen one million post on this issue since 7.1 was released. Everybody hates it and it is perhaps Apple's stupidest design decision. I, personally, happen to like it ... or not mind it as much either way, I should say.
But that's not what you asked ... Apple thought it was best for some odd reason to change the full screen pics to an itty bitty circle. As a previous poster said, it cannot be changed. But be sure to go to Apple's feedback website and let them know you are unhappy about it. I sense an iOS 7.1.1 coming out REAL soon! -
How to get the XML messages from JMS Queue in BPM
I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan -
Help, how to monitor the soap message sent by JAX-WS
Hi,everyone:
I want to monitor the soap message sent by JAX-WS using apache TCPMon.
For example, the JAX-WS is deployed on port 8080 , I make TCPMon listening on port 4444 and send soap request to port 4444 using JAX-WS.
Code in client:
@WebServiceClient(name = "JAX_WS", targetNamespace = "http://www.example.org/JAX_WS/", wsdlLocation = "file:/E:/zwz/EclipseWorkspace/JAX_WSDemo/WebRoot/META-INF/JAX_WS.wsdl")
public class JAXWS_Service extends Service {
private final static URL JAXWS_WSDL_LOCATION;
private final static Logger logger = Logger
.getLogger(demo.client.JAXWS_Service.class.getName());
static {
URL url = null;
try {
//URL baseUrl;
//baseUrl = demo.client.JAXWS_Service.class.getResource(".");
url = new URL("http://localhost:4444/JAX_WSDemo/JAXWSBean");
} catch (MalformedURLException e) {
logger
.warning("Failed to create URL for the wsdl Location: 'file:/E:/zwz/EclipseWorkspace/JAX_WSDemo/WebRoot/META-INF/JAX_WS.wsdl', retrying as a local file");
logger.warning(e.getMessage());
JAXWS_WSDL_LOCATION = url;
public JAXWS_Service(URL wsdlLocation, QName serviceName) {
super(wsdlLocation, serviceName);
public JAXWS_Service() {
super(JAXWS_WSDL_LOCATION, new QName("http://www.example.org/JAX_WS/","JAXWSBeanService")); //JAX_WS
@WebEndpoint(name = "JAX_WSPort")
public JAXWS getJAXWSSOAP() {
return super.getPort(new QName("http://www.example.org/JAX_WS/","JAX_WSPort"), JAXWS.class); //JAX_WSSOAP
}But i get the exception:
Exception in thread "main" com.sun.xml.internal.ws.wsdl.parser.InaccessibleWSDLException: 2 counts of InaccessibleWSDLException.
java.net.SocketException: Unexpected end of file from server
java.net.SocketException: Unexpected end of file from serverAnd the TCPMon doesn't receive anything.
If i use Axis2, the TCPMon will work fine.
I cannot figure out how to configure the webservices.
Could anyone help me? Thanks a lot.[http://blog.vinodsingh.com/2007/02/monitor-soap-messages.html|http://blog.vinodsingh.com/2007/02/monitor-soap-messages.html]
Edited by: vinod.singh on 7 Apr, 2009 11:03 AM -
How to make a SOAP message?
Hi!
I'm trying to send an object to a JMS queue using SOAP and Spring Integration. I already made the object into XML like so:
<app:MyClass>
<app:myValue>A value</app:myValue>
</app:MyClass>But I can't figure out how to wrap this into a SOAP message in a satisfying way. I tried using the SOAPMessage class, but since Spring doesn't like sending the message object as-is, I first have to convert it to a String:
//Create message
MessageFactory messageFactory = MessageFactory.newInstance();
soapMessage = messageFactory.createMessage();
//Get parts
SOAPPart soapPart = soapMessage.getSOAPPart();
SOAPEnvelope envelope = soapPart.getEnvelope();
SOAPBody body = envelope.getBody();
//Insert content
body.addTextNode(myClassXMLString);
soapMessage.saveChanges();
//Convert message to String
ByteArrayOutputStream stream = new ByteArrayOutputStream();
soapMessage.writeTo(stream);
String string = new String(stream.toByteArray());That produces an output that look something like this:
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope"><env:Header/><env:Body>&lt;?xml version="1.0" encoding="UTF-8"?&gt;&#13;
&lt;app:MyClass xmlns:app="http://namespace.myurl.com" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;&#13;
&lt;app:myValue&gt;A value&lt;/app:myValue&gt;&#13;
&lt;/app:MyClass&gt;
</env:Body></env:Envelope>So I have to do some string editing to make it look proper and fix the tags. But at that point I might as well just add the Envelope and other SOAP tags manually with a StringBuilder.
Is there a better way to do this?I don't know much about SOAP, but I would suggest that if you don't want that data to be handled as text, then you shouldn't be using the addTextNode() method. And working backwards, you shouldn't be converting your data to XML text like that either. Probably you should be doing something else to add the object directly into the SOAP document, but as I say I don't know much about SOAP so I can't say what.
But I would expect any decent SOAP tutorial to have an example of how to put an object into a SOAP document. -
How to intercept incoming SOAP messages?
I'm using weblogic workshop 8.1 for creating web services. I need to intercept incoming SOAP messages in order to do some processing before executing the required function (especially i would like to be able to know which function is to be executed and if required, execute an athorer one, according to the processing result)
I've tryed the tutorial given in the help, but i can't get it work. I'm using the example here after and i'm getting the following error: " the element '@jws:handler' is not allowed at this location".
package Handler;
* @jws:handler operation="handler.ConsoleLoggingHandler"
public class HandlerExample1 implements com.bea.jws.WebService
static final long serialVersionUID = 1L;
/** @common:operation */
public String echoString(String inputString)
return inputString;
I will apreciate if some one has a clue to resolve this problem.
Thank youHello,
From [1], Handlers on incoming messages are invoked before the message
is delivered to the web service operation, and handlers on outgoing
messages are invoked after the web service operation has completed. The
web service itself is unaware of the presence of handlers. SOAP message
handlers are sometimes referred to as interceptors. Also see [2][3].
Did you include the code for the handler
(handler.ConsoleLoggingHandler)? [4]
Here's a simple handler example [5]
Hope this is of some value,
Bruce
[1]
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/getstarted/conSOAPHandlers.html
[2]
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/getstarted/conSOAPHandlers.html?skipReload=true#WhereHandlersFit
[3]
http://edocs.beasys.com/wls/docs81/webserv/interceptors.html#1060763
[4]
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/getstarted/conSOAPHandlers.html?skipReload=true#HandlerExample
[5]
http://webservice.bea.com/log.zip
Fatna wrote:
>
I'm using weblogic workshop 8.1 for creating web services. I need to intercept incoming SOAP messages in order to do some processing before executing the required function (especially i would like to be able to know which function is to be executed and if required, execute an athorer one, according to the processing result)
I've tryed the tutorial given in the help, but i can't get it work. I'm using the example here after and i'm getting the following error: " the element '@jws:handler' is not allowed at this location".
package Handler;
* @jws:handler operation="handler.ConsoleLoggingHandler"
public class HandlerExample1 implements com.bea.jws.WebService
static final long serialVersionUID = 1L;
/** @common:operation */
public String echoString(String inputString)
return inputString;
I will apreciate if some one has a clue to resolve this problem.
Thank you -
How to get current suspended message ID from context
Hi all,
I'm trying to get the Suspended Message Id from my orchestration.
I don't want to get the this inside the orchestration, because that I already know how to do it.
I've search inside this forum and get a solution, but actually does not work.
Using this: Microsoft.XLANGs.Core.Service.RootService.InstanceId
(http://social.msdn.microsoft.com/Forums/en-US/95d2c9d9-5cbe-4bca-9cef-da7aba984d3c/how-do-i-access-instance-id-of-a-message-from-orchestration?forum=biztalkgeneral)
Also, I have searched in "all" properties of Microsoft.XLANGs.Core.Service.RootService and didn't had any luck
My goal?
I have a service that logs, to SQL, all errors in my biztalk applications. Right now is not saving the message id, and I do need. (I can easily change the method to receive the message id, but I'm trying to avoid that because I have 30 applications
using the same method/application).
Also, I have another service that is listening to all suspended messages.. In here I have the message Id (and other data) using WMI...
Now, I need to correlate both info..
Any help would be appreciated
Ricardo BessaHi,
Thanks for the reply. My answers inline.
I already understood the logic that you said and I'm working on it. However, if you have more good inputs to give, please do!
Thanks
Hi Ricardo,
Let us be clear with your requirement.
“I
have another service that is listening to all suspended messages.. In here I have the message Id (and other data) using WMI... ”
- What this “service” is? Is this some service external to BizTalk from where you want to access the detail of the suspended message? If so then you go to use some way similar to my earlier reply. When you want to access the suspended message details,
you got to access it from management db. The code which I have given in my earlier reply would do that. No other option in this case.
Yes, I am already doing that. I'm using a Windows service that is listening for all suspended messages in BizTalk. In this
windows service I can access to everything that I want (message Id; service type id; instance id; and many other properties...). My issue is not in here.
“Actually
when i call Microsoft.XLANGs.Core.Service.RootService.InstanceId I'm getting the property SendingOrchestrationID.”
- Are you try to access the message Instance ID from another child orchestration?
SendingOrchestrationID is the orchestration instance
ID where the message originated and you would get it when another orchestration (subprocess) which has been triggered by another orchestration (parent orch whose ID is
SendingOrchestrationID). Detail us about where and how
to you get this SendingOrchestrationID.
Because when you want to access “Suspended” Orchestration’s message instance ID, you can’t achieve it by calling it from sub-processes.
I'm using a external (custom) class library.
I have a custom log which tracks everything that goes in our BizTalk applications. When errors / warning I write that to a database table.
This is made in different times, so when I log the error to the database I need "something" that exists in my other service (MEssageID; service type
id; instance id; or other 'unique' property). Also, I don't want to change the log method, because (if I do that, I would need to change 30 applications).
That's why I'm looking for a 'global' property that I can use, without changing (a lot) my code.
When an Orchestration is suspended, it will be marked as “Suspended” in db and to get the messages associated with it, access the suspended Orchestration instance
ID from the db and use this ID from db to get its related contents/messages IDs.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Ricardo Bessa -
W520: How to get full speed and turbo on battery power
Here is how you get around the on battery max frequency limitation (of 1.2 GHz, at least for my i7-2620M) and no turbo (well, almost, read on):
0. Assuming you have max performance enabled everywhere possible (BIOS/PowerManager/Windows Power Scheme)
1. Load ThrottleStop.
2. Set the multiplier manually to your maximum multiplier (e.g., 27x for i7-2620M, 23x for i7-2820QM, etc...) or Turbo (which is the setting after your max multiplier).
3a. Enable ThrottleStop
3b. (optional) Check in CPU-Z and make sure that your highest multiplier is being used when the CPU is utilized. If you selected Turbo, you should have turbo enabled at this point.
4. Disable ThrottleStop
5. Exit ThrottleStop, so that it doesn't waste any battery power, since it is no longer needed
This will change the max frequency (and max multiplier) available from whatever Lenovo decided to arbitrarily fix it at (e.g., 1.2GHz) to the correct max frequency (which in my case is 2.7 GHz / 3.2 GHz for turbo). Now your laptop will be able to correctly go from 800MHz to whatever is the max frequency of your CPU, using both EIST and C1E. Turbo will also kick in, if you enabled it in ThrottleStop and the Lenovo PowerManager app will even show it as enabled.
Thanks Unclewebb for letting us get around this stupid max CPU frequency limitation that Lenovo has imposed on us.
Disclaimer:
Do this at your own risk, since Lenovo does not officially support it.
Turn on active cooling, if you do CPU intensive stuff for any prolonged period of time. This will take away some on battery time, but if battery time is of ultimate concern to you, then this change is probably not for you to begin with.
If you go through prolonged periods of CPU intensive activity, you will lower your battery life and produce a lot of battery heat, because you will have a relatively high discharge rate. A high discharge rate reduces both the number of charge cycles and the maximum charge capacity of a Li-Ion battery. I don't know how safe all of this is, so do this at your own risk and probably monitor temperatures along the way. Other laptops can do Turbo and full speed on battery power (e.g., the slim 3 lb Sony Z, with the i7-2620M), but then other laptops have different designs and cooling systems, so who knows how the Lenovo W520 hardware will react to this.Hi,
I have the opposite problem - my i7-2720QM is fixed at 2.2GHz no matter how hard I spank 1, 2 or all cores, and no matter what System Performance settings I apply. It even runs at this speed, and gives the same bench marks when on battery with the "system performance" set to Low.
No one even knows what the various System Performance settings actuall mean. E.g. Neither Lenvo support nor these forums could tell me what the difference between "Maximum Turbo","Turbo" or even "Low" under "System Performance" in the Lenovo power manager Advanced settings.
I have been trying go get turbo boost to work for 2 months. I have wasted so much time with this machine, I could have bought 2 Macbook pros for the cost of the time lost.
I dont know why Lenovo have disabled the turbo boost (and the opposite, turbo drop?) feature for this CPU - is it deliberate, or incompetence? Its certainly false marketing and extremely annoying that I have to use my ancient PC to do single threaded type work which I know the Laptop can manage if it were not crippled.
So people whos clock speed drops when on battery are the lucky ones. Mone doesnt even if I want it to. -
HT204291 How to get full screen display in AirPlay mirroring on Apple TV?
Hi there,
I am using airplay from my iPad (new). Mirroring doe not utilize 100% of my screen width. There is always 3 inches of screen initialized on either side.
I tried using all the screen resolution of video in settings it does not help. Ting to note is that the problem is occurring only for mirroring. If I play videos directly in YouTube on Apple TV I get full display. Any reason how to resolve this to achieve full screen and 100% Mirroring?No there is no way to Mirror full screen from an iOS device to the Apple TV. iOS devices are not 16:9 like your HDTV so the mirrored image appears as the size your iOS device would be if it were the size of your TV. Hope that makes sense.
Maybe you are looking for
-
How do I set up lightroom 5 to edit files in photoshop cc rather than or in addition to photoshop cs
How to set up lr5 to edit photos in ps cc rather than or in addition to ps cs6?
-
0fi_gl_4 enhancement
Hi Experts, I tried to enhance GL extractor. But once done, the FI doc number (BKPF -BELNR) is replaced by RBKP- BELNR. Not really able to figure out whats wrong in the code.. I am attaching the code...Can anyone please help..very urgent.. (Coding do
-
Using images with Transparency in Photobooks
I'm to a point where I would like to use images that utilize transparency in Aperture photo books. Is this possible? So far, PSD files that I've cropped with PS's lasso tools to have transparent areas surrounding their subject tend to change this are
-
Problem with sending large HTML files as attachment using JavaMail 1.2
Hi dear fellows, i am currently working on posting Emails with attachments using JavaMail 1.2. i succeeded in sending many mimetypes of files as attachments except for .htm and .html files. when large HTML files (say, >100 kB) serve as attachements,
-
MMBE Execute in Background - Spool Request Missing Header Information
Greetings, While reviewing differences between MMBE and MMBE_OLD in ECC 6.0 upgrade test environment it was discovered that when MMBE (RMMMBESTN) is executed in background the spool request does not display the material number, description, material