How to get IDoc Status from WCF Service Adapter?

I have successfully transfered a strong typed Idoc to SAP using a BizTalk WCF Service Adapter. I did so based on this example: [http://msdn.microsoft.com/en-US/library/cc185231(v=BTS.10).aspx]. We are using the IDoc to create a purchase order. The IDocClient.Send(idoc, ref guid); method returns only a guid. I can translate that using the SapAdpaterUtilities to a transaction ID. When I look at the Idoc in WE02, I can see that it has status information which includes the purchase order number. Is there any way for me to capture this status information in my .Net application when I send the IDoc? Can I query the transaction ID? Or do I just need to get the last PO Number through an RFC?
Scott

I ended up using the SAP .Net Data Provider in the Biztalk Adapter Pack to retrieve the PO Number. Essentially when you pass the IDoc you won't get anything in return unless the file transfer fails.
Scott

Similar Messages

LabVIEW DSC: How to get alarm status from the area?

Colleagues,
I have, lets say, 50 Shared Variables where alarming enabled. Some of these variables assigned to area, so I can get status of the entire area or acknowledge an entire area of alarms (prior to version 8.x there was groups of the tags).
Now I would like to get alarm status from the entire area. How can I do it?
In version 6 I was able to wire tag group to Get Alarm Summary Status. Now, in version 8, Alarm Status.vi can be wired to the array of the variables, but not to area. Is it possible to get all variables from the area?
regards,
Andrey.

I am not sure if I should be posting my problem under this particular topic. I am having trouble understanding acknowledge alarm vi and what this vi is supposed to do is not clear to me yet.
I have around 300 shared variables in my project and I have created a particular vi just to view the alarms that may pop up during runs. I created a main menu and this alarm vi can be accessed upon a button click in the main menu. Users get alarm alert based on sound configuration. Then he can navigate to the alarm vi and acknowledge the alarm. The alarm vi only contains alarm and event display found under DSC module.
The problem is everytime I click the alarm button in the main menu, it takes around 2 minutes for the alarm vi to update which is very annoying and unsatisfactory in the middle of run. I am not sure why it happens and I haven't got any response from support yet. These shared variables are managed under 10 different library files that are set up based on different loops of the process (flow, pressure and so on).
Then I looked into three alarm examples that ship with DSC module. None of these examples use acknowledge alarm vi. I implemented another vi similar to alarm demo vi in that example - containing multicolumn listbox. I created acknowledge event containing acknowledge button and used the acknowledge alarm vi under this event. Read vi alarm is under timeout event.
When I click the acknowledge button as soon as I see the alarm in multicolumn listbox, nothing happens - the color of font does not get changed to purple neither any alarms get acknowledged. I tried to aknowledge alarm by variable name or alarms or alarm area, it does not give me anything. What is this acknowledge alarm supposed to do? I tried to find examples everywhere in the web that uses this particular vi and haven't found one yet.

How to get Request Offering from given Service Offering using Service Manager SDK?

Recently, I am working on application where I have to fetch all Request Offering from given Service Offering.
I can retrieve all Request Offering using following method of SM SDK :
var requestOfferings = group.Extensions.Retrieve<RequestOffering>();// group is Management Group
But I am unable to get request Offering from given Service Offering as I am new to this platform. I have searched in web but can not find solution to this problem.
It would be great if someone guide for this problem or give me any suggestion related to this problem.
Thanks in advance.

RequestOfferings are handled a little differently in the SDK, but fortunately, they're still backed by standard EnterpriseManagementObjects..it just takes a little work to get them.
There are a few ways you can go about getting a request offering's related service offerings. I'm going to show you the relationship route, but you could also use a type projection to achieve the same goal.
In your original post, you're simply retrieving _all_ request offerings..that's fine. If you wanted to retrieve a single request offering (as I do in my example) you need to find the request offering's identifier. This identifier is a pipe delimited string
of various values. The quickest way to find it, in my opinion, is to query the MT_System$RequestOffering table in the database, but you can also find it by looping through all the RequestOfferings returned by group.Extensions.Retrieve<RequestOffering>();
Anyway, for the following example to work, you only need your request offering's Identifier and your management server name. (Again, you could simply loop through all of your request offerings and retrieve the service offerings for all of them)
The comments inline with this example should guide you through the steps.
//Connect to the management group and prepare the class and relationship types that we'll need.
String strMySCSMServer = "your server";
EnterpriseManagementGroup emg = new EnterpriseManagementGroup(strMySCSMServer);
ManagementPackClass mpcRO = emg.EntityTypes.GetClass(new Guid("8FC1CD4A-B39E-2879-2BA8-B7036F9D8EE7")); //System.RequestOffering
ManagementPackRelationship relSORelatesToRO = emg.EntityTypes.GetRelationshipClass(new Guid("BE417A55-6622-0FC3-FCEA-90CD23E0FC23")); //System.ServiceOfferingRelatesToRequestOffering
//An example of an extension identifier looks like this:
//1|My.RO.MP|1.0.0.0|Offeringc921c4feujhoi8cdsjloiz352d7gf3k0|3|RequestOffering
String strRequestOfferingIdentifier = "your request offering identifier";
//Retrieve the request offering using an Extension Identifier.
ExtensionIdentifier ei = null;
ExtensionIdentifier.TryParse(strRequestOfferingIdentifier, out ei);
RequestOffering ro = emg.Extensions.Retrieve<RequestOffering>(ei);
//Using the request offering's Identifier, retrieve the enterprise management object that it represents
EnterpriseManagementObjectCriteria emocRO = new EnterpriseManagementObjectCriteria("ID = '" + ro.Identifier + "'", mpcRO);
IObjectReader<EnterpriseManagementObject> orROs = emg.EntityObjects.GetObjectReader<EnterpriseManagementObject>(emocRO, ObjectQueryOptions.Default);
//Since we queried for only a single Request Offering, the object reader should contain 0 or 1 elements.
EnterpriseManagementObject emoRO = null;
if (orROs.Count > 0)
emoRO = orROs.ElementAt(0);
else
Console.WriteLine("No Request Offering found");
//Now, using the relationship type "System.ServiceOfferingRelatesToRequestOffering", get all Service Offering's related to our request offering
IList<EnterpriseManagementRelationshipObject<EnterpriseManagementObject>> lstEMROs = emg.EntityObjects.GetRelationshipObjectsWhereTarget<EnterpriseManagementObject>(emoRO.Id, relSORelatesToRO, DerivedClassTraversalDepth.None, TraversalDepth.OneLevel, ObjectQueryOptions.Default);
//The GetRelationshipObjectsWhereTarget method returns a list of EnterpriseManagementObjectRelationships..These objects represent that relationship between two objects.
//Thus, these relationship objects have two properties of interest; TargetObject and SourceObject. In this case, service offerings are the source of this relationship type and
//so, you can access the service offering object itself by using the relationship object's SourceObject property (which is nothing more than an EnterpriseManagementObject)
foreach (EnterpriseManagementRelationshipObject<EnterpriseManagementObject> emro in lstEMROs)
//emro.SourceObject is your Service Offering object. You can use it for whatever you need from here on out. In this example, i'm just writing out the DisplayName
EnterpriseManagementObject emoServiceOffering = emro.SourceObject;
Console.WriteLine(emoServiceOffering[null, "DisplayName"].Value);
Give it a try, let me know if you have any questions :)

How to properly pass credentials from WCF service to another?

I have a client application that calls a WCF service and passes client credentials like so:
OrderService.OrderServiceClient sc = new OrderService.OrderServiceClient();
sc.ClientCredentials.UserName.UserName = userName;
sc.ClientCredentials.UserName.Password = password;
The service uses custom authentication and validates the user/pass combination against my SQL db. All is well.
Now I have another WCF service, lets say Customer. In the OrderService I'm adding a Service Reference to the CustomerService and in the middle of one of the OrderService methods I want to call a CustomerService method. How can I pass the credentials? Please
note that the Customer and Order service ARE on the same IIS server. I am also using custom authentication.
It looks like I can access the username from the ServiceSecurityContext like so:
ServiceSecurityContext.Current.PrimaryIdentity.Name
Do I then have to make a trip back to the DB to get the password to send to the CustomerService call since it is not available? Seems silly... Any help is much appreciated. Thanks.
Should I be looking into impersonation?

Hi BBauer42,
Based on your description, I know that your scenario is Client-> OrderService->(Add service reference)CustomerService, then it seems that you want to implement the function like the double hop authentication. In my mind I think you try
to use the impersonation. The impersonation is a common technique that WCF services use to assume the original caller's identity in order to authorize access to service resource. In order to implement use the impersonation, we need do some configuration in
both service and IIS side, for more information, please try to refer to the following articles:
#Delegation and Impersonation with WCF:
https://msdn.microsoft.com/en-us/library/ms730088(v=vs.110).aspx .
#WCF: Learning Impersonation:
http://blogs.msdn.com/b/saurabs/archive/2012/07/16/wcf-learning-impersonation.aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get the IObject from the service order number

Hi Experts,
I am implementing the CRM_ORDER_STATUS Badi, in that I am getting the Service Order number but I want to get the IObject number, how to get it, which FM to use or any other table.
Please let me know.
Thanks in Advance for your help,
Praveen

Hi Praveen,
In the interface of the badi methods there is import parameter IS_STATUS_WRK with the field GUID
use that one to call FM CRM_ORDER_READ with that GUID (check if the GUID is for ORDER by using update saved trnsaction).
in the export parameter ET_ORDERADM_H you will find the object id (only after save unless it was customizing different)
Amit.

How to get the filename from J2SE File adapter

In our project scenario , we are using J2EE and J2SE engine both .J2EE for mapping and J2SE for Deliveying the message .
In one senario, routing will be based on the filename .
J2SE Sender File adapter --- XI Adapter --- XI pipe line
So the File reaching to XI pipelane via J2SE File adapter--> XI adapter.
When we are using the dynamic configurator in the XI to get the filename
we are not able to get the file name becasue it is coming to XI via
XI adapter.
How to get the filename ????Hope I am clear about the problem.

hi,
try this
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//obtengo la Key del FileName
DynamicConfigurationKey keyF = DynamicConfigurationKey.getName();
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/DynamicConfigurationKey.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
/people/mohammed.zabiulla/blog/2008/03/26/have-you-ever-tried-to-determine-mail-cc-dynamically
Hope it helps
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Apr 11, 2008 9:31 AM

How to get order status from co03

Hello Gurus,
Please tell me is there any fuction module available to get status of order from CO03
or any link that will help to get status...
Thanking you,
Gaurav

Hi Gaurav,
I checked few function module.And found few you can have a look at them.
CO_61_ORDER_STATUS_CHECK
CO_OCM_ORDER_STATUS_CHECK
CY_ORDER_STATUS_CHANGE
ORDER_STATUS_DETERMINE
STATUS_TEXT_EDI and look for OBJNR.
Hope your query resolves soon.
Have a best day ahead.

How to get iphone purchased from USA serviced in india?

i purchased an iphone 4s from usa (factory unlocked) and brought it to india. Recently i upgraded to ios6 and since then my phone is facing problems. My battery lasts only for about 4 hours and my usage is not at all extensive. Any application i use quits unexpectedly. Both these problems have come up only after the upgrade. Apple is suggesting i ship my phone to usa. But i want to know if there's any way i can get it serviced in india. i have already tried restoring my phone and it does not help. pls suggest a solution.

NO iPhone warranty is not international never has been
You will have to ship to a friend in US as Apple do not accept mail in from outside US

How to change the IDOC Status from 30 to 03

Hi Friends,
In the Partner Profiles Collect IDOCS option is Selected and the Output mode is 4.
In my Custom Program i am Using the Function Module MASTER_IDOC_DISTRIBUTE to generate the IDOCs
I am getting the IDOCs of Status 30.
then in my Custom Program, I am Submitting the IDOCs to RSEOUT00 program.
to change the IDOC status from 30 to 03.
SUBMIT rseout00 USING SELECTION-SCREEN '1000'
               WITH docnum IN gt_range_idocs
               WITH p_compl EQ 'Y'
               AND RETURN.
but still i am not getting the IDOCs of changed status.
I need to get the Changed IDOC status and if the IDOC status is not changed then I need to generate an Error file for the IDOCs data and send that data to customers as a mail.
so my requirment is to call the RSEOUT00 in the Custom Program and Change the IDOCs Status to 03.
When i am Executing the RSEOUT00 Indidually by giving the IDOCs numbers, then the IDOCs Status is going to change to 03 from 30.
Kindly Guide me how to proceed furthur
Thanks in Advance,
Ganesh

Thanks Shrishit,
RC1_IDOC_SET_STATUS changing the Status from 30 to 03.
Its fine, But my Question is will IDOC Data will be reached to XI Server or not.??
means is the functionality of this Program is same as the RSEOUT00.
MY job is to change Status from 30 to 03 only
and then Check the Status of those IDOCs, and if the IDOC is not sended to XI i.e.;03 status, then I need to send the Details of IDOC (i.e.; data in filed IDOC) to Customer Mail ID through an Attachement.
I hope you Understood my AIM, why I need to change the Status in my Custom Program only, by submitting IDOCs to this report .
Kindly waiting for your reply,
Thanks in Advance,
Ganesh

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

How to get the status of service in rac

Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.

user7244870 wrote:
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.
Internal services cannot be managed with srvctl utility. Check if you have any user defined service in dba_services
SQL> desc dba_services
Name                                      Null?    Type
SERVICE_ID                                         NUMBER
NAME                                               VARCHAR2(64)
NAME_HASH                                          NUMBER
NETWORK_NAME                                       VARCHAR2(512)
CREATION_DATE                                      DATE
CREATION_DATE_HASH                                 NUMBER
FAILOVER_METHOD                                    VARCHAR2(64)
FAILOVER_TYPE                                      VARCHAR2(64)
FAILOVER_RETRIES                                   NUMBER(10)
FAILOVER_DELAY                                     NUMBER(10)
MIN_CARDINALITY                                    NUMBER
MAX_CARDINALITY                                    NUMBER
GOAL                                               VARCHAR2(12)
DTP                                                VARCHAR2(1)
ENABLED                                            VARCHAR2(3)
AQ_HA_NOTIFICATIONS                                VARCHAR2(3)
CLB_GOAL                                           VARCHAR2(5)http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm

BizTalk Tracking Profile Editor not tracking the data and how to implement the Orchestration as wcf service over SSL

Hi Ashwinprabhu,
thank you very much for your answer.
i have one more query, I have orchestration published as wcf service in IIS and internally orchestration calling one more service , it means orchestration sending a request and getting response back from the service.
actually we are implementing the copy of that called service through biztalk orchestration for system automatic and tracking failed messages and n/w failures.
But tracking profiler not tracking the Data.
And we need to develop the http service as https(Over SSL), we implemented in iis using self
signed certificate, it is working just browser for wsdl(in browser), we are not able to test the service in wcf test client, it is giving wsdl error, in wsdl schema reference showing with HTTP only,
please help me how to resolve the issue.
Teegala

First things first, I think it's best to publish only schemas as WCF service for dependency management reasons. That said - WSDL availability is covered in the WCF adapter under the behaviors. If you're using HTTPBasic this may be hard to modify, but using
WCFCustom allows you to add the WSDL behavior and specify that it should be available via HTTPS.
As to the BAM, are you using TPE within the orchestration or at the port level? I'd imagine your TPE tracks the start and end events of your orchestration using the Orchestration Schedule. If you're fairly confident that the TPE is correct and
yet don't see BAM data 1) make sure your SQL Agent is running healthy and all jobs look OK and 2) check the TDDS tables in both the message box and the BAMPrimaryImport databases. These will show you if there has been some sort of sync issue. There's
even a TDDS errors tables - so check that out.
Kind Regards,
-Dan
If this answers your question, please Mark as Answer

How to get acknowledgement status for PO

Hi!
I would like to write a program which gets the acknowledgement status from IDoc Processing for a given purchase order number.
How can I do that? In which table can I find the link between IDoc and PO? How to get the status?
Thanks in advance
Christian

EDIDS -- table
Check in the below link to update the staus and find the application objectof an idoc
http://www.sapgenie.com/sapedi/idoc_abap.htm#Getting%20IDocs%20linked%20to%20Application%20documents

How to get the version no. for service po?

Hi,
How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
Regards,
Rachel.

Hiee,
It is not like service PO does not have revision.
REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
MM->Purchasing->Version management -> External documents
Here check for your doc type and purchase org version management is active.
Regs,
Appie

How to get IDoc number using sdata records

Hi Experts,
I have executed a report program in background. Its generating few IDoc's. I can view those idoc's in WE05 also. But now i want to display those idoc number in the result output of the report. One of the segment having materrial number and plant details in the IDoc. Using this details i want to display the IDoc number in the output screen. Even i have tried with EDID4 table its taking huge time to get a single IDoc. Is there is any simplest way is there to get those idoc's .
Otherwise how to achive this?
Thanks and Regards,
Mohana

Hi,
1.)If you want the ouput in the same report program which triggers the idoc, it is better to use the control record information.
You will get IDoc Number from XEDIDC(check the below code) and you can store the idoc number into an internal table if more idoc is expecting to be triggered.
     call function 'MASTER_IDOC_DISTRIBUTE'
          exporting
            MASTER_IDOC_CONTROL        = EDIDC
          tables
            COMMUNICATION_IDOC_CONTROL = XEDIDC
            MASTER_IDOC_DATA           = XEDIDD
          exceptions
            others                     = 5.
   read table xedidc index 1.
append xedidc-docno to it_docno.
And finallly use this to display in the output.
2.) if u want it in a seperate report, then select based on date, idoctype, messagetype
Regards,
Sajith

How to get IDoc Status from WCF Service Adapter?

Similar Messages

Maybe you are looking for