How to get line no of row whsoe button is pushed in step loop display

Hi experts.
In step loop i have a button too with the other fields.which is being displayed on the left side of every row.now i just want that to get the no of that row of which the button is pushed.
i am using GET_CURSOR_LINE but it fails i.e when a cursor is in third row and i press the button of 2nd row, in this way it gives me the line no 3 but it should be the 2.
Note: I am using step loops not the table control in dynamic programing.
it is a great challenge for all experts.

hi experts hi.
what happend.
does any body know nothing
plz just tell that iz it possible.
or any help...any any help
experts where r u all?

Similar Messages

How to get lines in between two fields in smartform

Dear Freinds,
               I have developed one smart form however iam not getting output correct could you please help me out, the problem iam getting is iam not able to get the following things
in The Main Window
         i have one header , one Main Area and one Footer Area
in the header i have created one %ROW1 and named as Row and again under the ROW i have
created a % Cell ...........again i want to create for the same Row iam not able to creeate another
Cell.........please let me know how i can have 5 or 6 cells for the same Row .
as i want the output as
UNit No. : 103              Quantity Req : 200   Date of Issue : 10/01/2008
Destination : Delhi         Amount       : 300    Rate/Per unit : 7
and secondly i have to have lines between the rows .... so please do let how to get lines in between rows as well..
i have tried allot but not able to get.
regds
madhuri

Hi Marcin Pciak ,
             Thank you very much for giving me the solution, one more point i require in this regard
i have requirement as below
IDNo                                      Invoice Amount
Despatch Date                      Despath Time.
Now i want i created Two Cell s (Cell A & Cell B) could you let me know how i can get IDNO and
Invoice Amount adjusacent to each other as above but right now iam getting in my smarform
IDNO
Invoice amount
but i want is IDNO--    Invoice Amount--
please help me this point
thanks once again for giving me answer.
regards
madhuri

In Table Control How to get only a single row .

Hi
In Table Control How to get only a single row .I am able to decrease it its height to 4 but then 2 rows is getting dsplayed .I want only one row to be display and 2nd row should be deactivated or not visible.
regards
Avik
Edited by: Julius Bussche on Jan 30, 2009 1:10 PM
Removed friendly greeting from the subject title

Hi Avik
use this code it will help you.
MODULE passdata OUTPUT.
READ TABLE it_revision INTO wa_rev INDEX tab_clc-current_line.
IF sy-subrc = 0.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.      " 111 IS THE GROUP NAME
        screen-input = 1.          " input mode
        screen-active = 1.         " input mode.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = '111'.       "GROUP NAME
        screen-input = 0.           " display mode
        screen-active = 1.          " DISPLAY MODE.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDMODULE.                 " PASSDATA OUTPUT
Make sure in group tou are passing the field name that you want in input mode on the base of other field
Hope it will help you.
Thanks
Arun Kayal.

How to get line in Line chart to go to edge / border of graph

Post Author: brutschm
CA Forum: Charts and Graphs
How to get line in Line chart to go to edge / border of graph?
I've seen this before but can't remember how to do it now. I'm using Crystal Reports XI
Thanks,
Brandon

Post Author: V361
CA Forum: Charts and Graphs
Not sure if this is what you are looking for.
Group X Axis setings, uncheck the Value axis crosses Between Groups.

How to get control on each row in advance table

hi, i have a advanced table with some data, in each row i have two radio buttons which i need to set depending on some column value in the row, i tried by following code
for(SoftCompVORowImpl row2 = (SoftCompVORowImpl)svo.first();row2!=null;row2=(SoftCompVORowImpl)svo.next())
if(row2.getAttribute("CommitEndDate")==null || row2.getAttribute("CommitEndDate").equals(""))
onetime.setSelected(true);
recurring.setSelected(false);
else
onetime.setSelected(false);
recurring.setSelected(true);
but this code is making set only one radio button (onetime), which ever i am making first true its getting selected, i need to know how to get control of each row....

Babu,
Basically you should use the decode function in your sql query itself and attach it with BC4J properties of radio buttons.In that case you don't have to worry about setting them declaratively !
--Mukul

How to get line item net price and net value?

I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?

Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty

How to get a usb device to show up on macbook pro 13inch retina display late 2013 model. os mavericks

how to get a usb device to show up on macbook pro 13inch retina display late 2013 model? os mavericks

Check with your telephone carrier or Android:
https://www.android.com/filetransfer/
Ciao.

How to get the number of rows in a ResultSet

Hello,
I'm an intern and I'm trying to get the number of rows from result set in oracle using rs.last() and rs.beforeFirst() methods
but I got an error. Could Below is my sample code:
import java.sql.*;
public class SarueckConnect {
public static void main(String[] args) {
Connection con = null;
Statement stmt = null;
ResultSet re = null;
String[] ParamArray;
ParamArray = new String[24];
//Properties logon;
try {
Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
con = DriverManager.getConnection
("jdbc:oracle:thin:@258.8.159.215:1521:test_DB","data","data"); //making the connection DB.
stmt = con.createStatement ();// Sending a query string to the database
//stmt.executeUpdate("UPDATE test_table set steuk = 6 WHERE steuk = 5");
ResultSet rs = stmt.executeQuery("SELECT mandt,kokrs,werks,arbpl,aufnr,vornr,ile01,"+
"lsa01,ism01,ile02,lsa02,ism02,ile03,lsa03,ism03,ile04,lsa04,ism04,steuk,matnr,budat,"+
"kostl,pernr,rueckid FROM test_table where steuk =6");
//Print the result out.
rs.last(); //This is the line which gives an error.
int rows = rs.getRow();
rs.beforeFirst();// I presume this is wrong to.
ParamArray = new String[24*rows];
int counter=0;
while (rs.next()) {
for (int i = 1; i <= 24; i++){
ParamArray[i-1+(counter*24)] = rs.getString(i);
System.out.print(rs.getString(i) + '\t');
System.out.println();
counter++;
} catch(Exception e) {
e.printStackTrace();
} finally {
try
if(stmt != null) stmt.close();
if(con != null) con.close();
} catch (Exception exception) {
exception.printStackTrace();
TryBapi sap = new TryBapi(ParamArray);
}When I run the code I do have the following ERROR Message:
java.sql.SQLException: Invalid operation for forward only resultset : last
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.driver.BaseResultSet.last(BaseResultSet.java:91)
at SarueckConnect.main(SarueckConnect.java:28)Please could any body Help me out here to figure out how to correct this?
Any Help would be highly apprecited.

make your result set scrollable...Not such a good idea. With Oracle, the JDBC driver will read and cache all the ResultSet in memory (with other DBMSs/drivers the behavior will probably be different, but you will still have some unnecessary overhead).
You can do the caching yourself if you think it's worth it. If the piece of code you posted is why you need this for, then use a List or Vector and you won't need to know the size upfront.
Alin,
The jTDS Project.

How to get the number of rows written to the header of the spool file.

Hi
I need to create a header line for the spool file .
the header line should include fixed length values .
The header should include the number of records found in the table with a maximum begin date (begin_date is the column of the table)
To get the header in the spool file , i wrote a select query has :-
--SPOOL 'C:\Documents and Settings\abc\Desktop\output.TXT'
select 'W'||to_char(sysdate,'MM/DD/YYYYMi:HH:SS')||lpad(max(rownum),9,'000000000') ||'R'||max(to_char(school_from_date,'MM/DD/YYYY')) ||
rpad(' ',76,' ')
from dad.school
group by sysdate;
SPOOL OFF
which gets me all the rows in the table , but i only want the rows with the latest school_begin_date .
how can i achieve that ...
I know that a subquery should be written in the from clause to get the number of rows found with a maximum school_begin_date.
select 'W'||to_char(sysdate,'MM/DD/YYYYMi:HH:SS')||lpad(max(rownum),9,'000000000') ||'R'||max(to_char(school_from_date,'MM/DD/YYYY')) ||
rpad(' ',76,' ')
from dad.school where
select rownum from dad.school
where school_begin_date = max(school_begin_date) ;
the error i get is
ORA-00934: group function is not allowed here
I NEED HELP ..IN GETTING THE ROWNUM JUST FOR THE LATEST BEGIN_DATE ?
PLS HELP ME IN WRITING THE QUERY .
THANKS IN ADVANCE .

Try this:
select 'W'||to_char(sysdate,'MM/DD/YYYYMi:HH:SS')||lpad(max(rownum),9,'000000000')||'R'||max(to_char(school_from_date,'MM/DD/YYYY')) || rpad(' ',76,' ')
from dad.school
where school_begin_date = (select max(school_begin_date)
from dad.school);

Interactive Report: how to get value of given row/col cell in selected row

Hi -- I have an interactive report. Instead of the default behavior of the link going to a single row view, I want it to
go to a form for editing the row. This means I have to be able to populate the form w/ the correct row's information...
so need to get the value(s) for the PK column(s) in the selected row of the interactive report, so I can select the row
from the database.
How can I do this? I see in the report attributes, Link Column section, I can set Rows Uniquely Identified by, and a Unique
Column (though there could be more than one in a PK). I imagine I'd want to use the rowid, but I'm not sure how the
rowid of the selected IR row can be referenced. And at that point, I'm not sure how to get the IR column value for
that row. (Say I'm on the 8th row and I need the first column... How is the column referenced? By a number, it's name,
its heading?)
Or maybe I'm not on the right track at all...
Ideas?
Thanks,
Carol

Hi Carol,
What I´m trying to do is: defining a button such as when you click it a pl-sql procedure is called, which needs as an input parameter the id of the row selected in my form. what I need first, then, is to get the id of the selected row. how did you get it?
Thanks in advance
Francesco

How to get the number of rows in a repeating frame ?

Hi all,
When I launch a report from forms then sometimes there are data in the report and sometimes there are no data. And the problem is that when there are no data then the frame containing the repeating frame is still displaying and a blank page displays on the report.
So I want to get the number of rows from the repeating frame so that I can code a format trigger on the frame to display or not the enclosing frame depending on the existence of data from the repeating frame.
Thank you very much indeed.

Dear Friend,
You can achieve this. Define a summary column (say cnt). Select summary type as "COUNT". select any one of columns that are getting displayed in your repeating frame as summary column and provide "reset at" group name (or set this to report if you are defining this field at report level) . This "cnt" variable will contain how many records that will be fetched for your repeating frame (i.e. Group of Repeating frame). You can use this "CNT" variable in your format trigger.
In this case there is no need to write before report trigger or anything.
Regards,
Manish Trivedi

How to get the number of rows in a DB-Cursor

When i open a database cursor i do not know how much rows are stored in the cursor. To solve this problem i have to send a 'select count(1) ...' to get the number of rows before i set up the cursor. I think that this is not very clever and could possibly cause performance problems. But i need the num of rows to show the percentage of processed rows. Is there any other way to get the num of rows? May be by checking the cursor directly?
Please help!
Thanx a lot

In order to find out how may rows are going to be processed, oracle has to visit every row. So with a cursor, there is no property that will accurately reflect the number of rows until you get to the last one. That said, you could use
select count(*) over() as row_count, <rest of your columns> FROM <your table>
which will give you the total row count agaist each row in the result set. There are performance penalties involved but they will be less than issuing the query twice, once to get the count and once to get the rows.
Have a look on asktom for some very usefull info about all this.
HTH

How to get Line Number in Purchase Order

Hi Experts
I want to get Line Number of Matrix of Purchase Order. How I get it ?
I want to compare Matrix Line Number with Line Number of POR1 in DB.
Please Help me.
Hepil Doshi

Hi Hepil,
Linenum in Matrix "38" is Columns.Item("110").Value
SBO application doesnot show it, but you can get the linenum from that column.
You can test by getting the column title. omatrix.columns.item("110").Title
Hope it helps.
Regards
Edy

How to Get Lines in Pie Charts

Using CF7 and WebCharts3D, and got my pie chart working. Only
problem, I can't figure out how to get it to show LINES from the
label of each pie slice, to the label's corresponding slice. The
pie slice labels (descriptions) appear outside the pie chart, which
is where I need them. But when you get a pie chart with a lot of
slices (say 8 or more) and a lot of smaller slices close together,
it's hard to tell which label applies to which slice. Hope this
makes sense.
All I need is to ADD A SMALL LINE from each label to it's
corresponding pie slice. I've looked for options in WebCharts3D to
do this, but can't seem to find anything (in the Decorations,
Series, etc., sections).
If this is possible (getting these lines to appear) could
someone please advise how to do this? Greatly appreciate any
help/advice. (It's probably something very easy, and I just missed
it).
Gary

I was afraid of that. Just wanted to make sure I wasn't
missing something. Thanks for the note and for confirming. Much
appreciated.
Gary

How can I get the number of rows in my sql result, without a loop?

Hello,
I've a problem, I would like to get the number of rows in my sql result without make a loop like :
while (rs.next()){
int number = rs.getRow();
Is there any method to do this, on the first element?
Thx, STeF

If you want to count how many rows are in result set, I dont think you can, but you could always run a count statement for that sql
say your sql is
select field1, field2, field3
from table1, table2
where field4=field5 ......
then you can count the rows this statement returns by
select count(*) from
(say your sql is
select field1, field2, field3
from table1, table2
where field4=field5 ......)
This way you will get the count for just that sql

How to get line no of row whsoe button is pushed in step loop display

Similar Messages

Maybe you are looking for