How to get list of tables/users that are under audit

Hello,
For testing perpose I have set audit on many tables and users.
Is there any view or table from which I get list of objects that are kept under audit?
Noaudit All command for disabling all of them does not work properly. I have to exactly revert audit to stop.
Means if I write audit insert on table1;
Now for disabling this, if I write noaudit all then it dont works but If I write noaudit insert on table1 then it works.
So I need a list on which objects I start audit.
Or is there any other way to stop them?
Regards,
Bhavin M Mistry...

Try
DBA_STMT_AUDIT_OPTS
DBA_PRIV_AUDIT_OPTS
DBA_OBJ_AUDIT_OPTS
SYS@etest> audit role;
Audit succeeded.
SYS@etest> SELECT * FROM DBA_STMT_AUDIT_OPTS;
USER_NAME                      PROXY_NAME
AUDIT_OPTION                             SUCCESS    FAILURE
ROLE                                     BY ACCESS BY ACCESS

Similar Messages

How to get list of tables used in packages

Dear All
Can you pls tell me how to get list of tables used in packages
Regards

select referenced_name
from user_dependencies
where name = 'your_package'
and referenced_type = 'TABLE'Regards,
Rob.

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How do I chat between users that are under one .mac/MobileMe family acct?

How do I chat between users that are under one .mac/MobileMe family acct? We are all under one account, but in different locations, using iChat 4.0.5 and OS 10.5.4. Thank you.

The only way is to create separate accounts under either AIM or Jabber (for example Googletalk). Then everybody logs into iChat with a different user and you can have full iChat functionality (except encryption which works only if you have different .mac accounts). If some members of your family have already a gmail/googlemail account then they can use this account information to log into iChat if you create a Jabber account with the gmail user information. Otherwise go to www.aim.com, request a screen name and use this user information to create an AIM account in iChat.
Have fun.

How to provide Admin access to users that are in external table

Hello All,
I have configured external table authentication in OBIEE 11.1.1.5.0, i am able to login, i have some couple of users, i want to provide for some users as ADMIN Privileges
. Also how to identify these users in application roles, when i am trying to add in the application roles, i am not able to find these users.
Thanks,
Sreekanth

Try
DBA_STMT_AUDIT_OPTS
DBA_PRIV_AUDIT_OPTS
DBA_OBJ_AUDIT_OPTS
SYS@etest> audit role;
Audit succeeded.
SYS@etest> SELECT * FROM DBA_STMT_AUDIT_OPTS;
USER_NAME                      PROXY_NAME
AUDIT_OPTION                             SUCCESS    FAILURE
ROLE                                     BY ACCESS BY ACCESS

How to get List of SharePoint Groups to which Current Users belongs using Javascript ?

How to get List of SharePoint Groups to which Current Users belongs using JavaScript? Not JSOM

Here is the code that worked for me:
var userid= _spPageContextInfo.userId;
var requestUri = _spPageContextInfo.webAbsoluteUrl + '/_api/web/CurrentUser/Groups?$select=Id,Title';
alert(requestUri);
var requestHeaders = { "accept" : "application/json;odata=verbose" };
$.ajax({
url : requestUri,
contentType : "application/json;odata=verbose",
headers : requestHeaders,
success : onSuccess,
error : onError
function onSuccess(data, request){
var s='';
for (var i = 0; i < data.d.results.length; i++)
s +=data.d.results[i].Title+'\n';
alert(s);
function onError(error) {
alert("error");

How to get list of users who reset password using FIM portal

How to get list of users who reset password using FIM portal
-Thanks Rakesh Sawant

Hi Rakesh,
I think you are looking for something like this:
Using Powershell to list all users that had completed
a password reset within the last 30 days
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Script to find users that are a member of more than one of a list of specific groups

Hi,
I need to generate a list of users that are members in more than one group, out of a list of specific security groups. Here's the situation:
1) We have about 1100 users, all nested under a specific OU called CompanyUsers. There are sub-OUs under CompanyUsers that users may actually be in.
2) We have about 75 groups, all directly under a specific OU called AppGroups. These groups correspond to a user's role within an internal line of business application. All these groups start with a specific character prefix "xyz", so the group
name is actually "xyz-approle".
I want to write a script that tells me if a user from point 1) is a member in more than one group in point 2). So far, I've come up with a way to enumerate the users to an array:
$userlist = get-qaduser -searchroot 'dq.ad/dqusers/doral/remote' | select samaccountname |Format-Table -HideTableHeaders
I also have a way to enumerate all the groups that start with xyz that the user is a member of:
get-QADMemberOf -identity <username> -name xyz* -Indirect
I figure I can use the first code line to start a foreach loop that uses the 2nd code line, outputting to CSV format for easy to see manual verification. But I'm having two problems:
1) How to get the output to a CSV file in the format <username>,groupa,groupb,etc.
2) Is there any easier way to do this, say just outputting the users in more than one group?
Any help/ideas are welcome.
Thanks in advance!
John

Here is a PowerShell script solution. I can't think of way to make this more efficient. You could search for all groups in the specfied OU that start with "xyz", then filter on all users that are members of at least one of these groups. However, I suspect
that most (if not all) users in the OU are members of at least one such group, and there is no way to filter on users that are members of more than one. This solution returns all users and their direct group memberships, then checks each membership to
see if it meets the conditions. It outputs the DN of any user that is a member of more than one specfied group:
# Search CompanyUsers OU.
strUsersOU = "ou=CompanyUsers,ou=West,dc=MyDomain,dc=com"
$UsersOU = New-Object System.DirectoryServices.DirectoryEntry $strUsersOU
# Use the DirectorySearcher class.
$Searcher = New-Object System.DirectoryServices.DirectorySearcher
$Searcher.SearchRoot = $UsersOU
$Searcher.PageSize = 200
$Searcher.SearchScope = "subtree"
$Searcher.PropertiesToLoad.Add("distinguishedName") > $Null
$Searcher.PropertiesToLoad.Add("memberOf") > $Null
# Filter on all users in the base.
$Searcher.Filter = "(&(objectCategory=person)(objectClass=user))"
$Results = $Searcher.FindAll()
# Enumerate users.
"Users that are members of more than one specified group:"
ForEach ($User In $Results)
    $UserDN = $User.properties.Item("distinguishedName")
    $Groups = $User.properties.Item("memberOf")
    # Consider users that are members of at least 2 groups.
    If ($Groups.Count -gt 1)
        # Count number of group memberships.
        $Count = 0
        ForEach ($Group In $Groups)
            # Check if group Common Name starts with the string "xyz".
            If ($Group.StartsWith("cn=xyz"))
                # Make sure group is in specified OU.
                If ($Group.Contains(",ou=AppsGroup,"))
                    $Count = $Count +1
                    If ($Count -gt 1)
                        # Output users that are members of more than one specified group.
                        $DN
                        # Break out of the ForEach loop.
                        Break
Richard Mueller - MVP Directory Services

How to get the room id & user id in our component

Hi Experts,
Collaboration -> Rooms -> Room Directory
It will show the available rooms
Select restricted room tab in that.
That will show the restricted room list, if you are not a member of the room you can request the room by clicking context menu of the room and select the Request Membership option. Then it will send the mail to the owner of the room.
In that UI commend they mapped with the roomid and userid.
I need to know how to get the room id & user id in our component.
How to get the Room Id dynamically?
Can anybody help me for this?
Helpful answers will appreciate.
Thanks and Regards,
Kathiresan R

Hi Kathiresan,
you can get the Room ID and the User ID over the API.
Getting User ID within WebDynpro application:
IUser user = WDClientUser.getCurrentUser().getSAPUser();
String logonId = user.getUniqueId();
Getting User ID within custom Portal Component:
IPortalComponentRequest request = (IPortalComponentRequest) httpRequest;
IUser user = request.getUser();
String logonId = user.getUniqueId();
Getting Room Id of a user who belongs to this room:
IUser user = request.getUser();
IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
IRoom[] myRooms = roomsAPI.getAllRoomsForUser(user);
String roomId = "";
for (int i=0; i<myRooms.length; i++) {
IRoom room = myRooms<i>;
if (room.getName.equals('nameOfRoomToFind')) {
roomId = room.getId();
Greets
Denis

How do I get to see the procedures that are running?

Good afternoon. How do I get to see the procedures that are running?
Thanks.
Daniel Sousa

I agree with Billy: never use undocumented procedures, they can change anytime.
The link you were referring to is probably this one: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:767025833873 and the post was not from Tom Kyte but from a reviewer.
The comment from Tom was:
sorry -- x$ tables are magical and I give no help in that area at all.
The same user that posted the query added in a following post:
Tom, I agree 101% - X$ are "magical", they CAN and WILL change anytime, without warning, and worse, NO READ-CONSISTENCY here - so, in a very busy db, chances are of X$ being "late", not refreshed, or alike.
Regards.
Al

How to get list of buttons count

how to get list of buttons count in the oracle web page (similar to child objects concept in QTP for getting buttons count in a page)

Hi Rakesh,
I think you are looking for something like this:
Using Powershell to list all users that had completed
a password reset within the last 30 days
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

How to get list of queries .....

how to get list of all queries on a particular cube, with descriptions?
(meta data repository is not avilable)

Hi..
1. In the Bex you can fild the list of queries under a data target, by opening 'Queries'.
In the dialog box that appears, select the Infoarea button which is in the left pane.
You will get list of all Data targets. If you expand it you can find the queries built on those data target.
2. If you want to get the list of queries from Tables, you have to link the following tables:
RSZRANGE
RSZELTXREF
RSZELTTXT
RSRREPDIR
RSZSELECT
RSZCOMPDIR
Regards,
Debjani..

How to get the plsql table data into output cursor

Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manju

manjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it.

How to get list of docs for particulat billing type on plant wise

very urgent
is there any t-code, report to look thi
how to get list of billing docs grnerated for particulat billing type and if possible on plant wise also
very urgetnt
points to be rewarded
eagerly waitng from sap gurus

Dear chakri
As you may be aware, in VF05 you need to enter either Payer Code or Material Code and then based on the selection criteria, the report will generate. Please give the (ensure that this code is exist in billing document) Payer code and now select "Further sel.criteria" and DONT forget to enter the date in from column of "Billing docs.date". By default, there you can see one month date range.
Still if you get error message, please let me know the error message.
thanks
G. Lakshmipathi

How to get list of tables/users that are under audit

Similar Messages

Maybe you are looking for