How to get longer text boxes into iMovie

I'm hoping to input longer quotes and text into iMovie HD 6. I thought I got around this problem by creating a ppt with the appropriate text, saving the slides as jpgs, moving them to iPhoto, and then importing them into my movie (long process!). Unfortunately, the text comes out blurry.
How can I simply write the text into iMovie when it's longer than a sentence? Or else how can I create some image with the text that I can import and it will show up clearly?

I have the same problem - I want to have a ticker-style text scrolling at the bottom, but for texts longer than 200 words the font becomes blurrier and harder to read, and by the time the text reaches 500 words it's completely illegible. This does not seem to be affected by how long the ticker-box lasts (same problem for when it's 7 minutes as 2 minutes), though splitting a 4 minute, 400 word string into two 2 min, 200 word strings helps if you put them into two seperate "ticker" instances. But then you have an unwanted gap in the middle between when one ticker ends and the other starts.
So, why is the text quality so ******?

Similar Messages

How to get Long text in report from FBL3N

Hi,
I need to get Long Text from FBL3N (G/L Account Line Item Display) in my report.Can anyone tell me in which table it is stored?

Hi
These long texts are not stored completely in any tables
where as the parameters of these texts like OBJECT,OBJECTNAME and ID, LANGUAGE are stored in STXH table
You have to pass these 4 parameters to the fun module READ_TEXT and to fetch the text.
Double click on the long text will goes to text editor
from menu GOTO-> HEADER you will see the above 4 paramters
see the doc of READ_TEXT fun module
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji

How to get Long text in CJ20n

Hi,
I need to get the long text that we maintained in CJ20n tcode under long text at project level. I need to display the same in Script layout or report. I didnot find any table or functional module to get it. please help me out.
regards,
Chandra

Hi
Double click on the Long text, it will take you to Text editor
from the Menu GOTO-> HEADER
you will find the OBJECT,ID,OBJECTNAME and LANGUAGE parameters for that lang text which are to be passed to the READ_TEXT fun module
for displaying it on report use the above fun module and fetch the text in IT_LINES internal table and write it on report output
You can also see the doc of the read_text
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
IN SCRIPTS you can use the INCLUDE statement to print the Long texts
/: INCLUDE TEXT<name> ID <id> Lang <en> paragraph <za>
Regards
Anji

How to Get Long text of a material?

Hi Friends,
Could you please help me, in getting the Long text of a Material?
if any sample code is available, kindly provide.
Regards,
Xavier.P

here you have a working code snippet: the longtext is stored in table lines.
tables: stxh.
data: lines like tline occurs 0 with header line.
data: ID            LIKE     THEAD-TDID,
        LANGUAGE     LIKE     THEAD-TDSPRAS,
        NAME            LIKE     THEAD-TDNAME,
        OBJECT            LIKE     THEAD-TDOBJECT.
clear: lines[].
select single * from stxh into stxh
    where tdname eq mara-matnr
    and tdid     eq 'GRUN'
    and tdobject eq 'MATERIAL'
    and tdspras eq 'EN'.
    ID     = stxh-tdid.
    OBJECT = stxh-tdobject.
    NAME   = stxh-tdname.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        ID                      = id
        LANGUAGE                = 'EN'
        NAME                    = name
        OBJECT                  = object
      TABLES
        LINES                   = lines
      EXCEPTIONS
        ID                      = 1
        LANGUAGE                = 2
        NAME                    = 3
        NOT_FOUND               = 4
        OBJECT                  = 5
        REFERENCE_CHECK         = 6
        WRONG_ACCESS_TO_ARCHIVE = 7
        OTHERS                  = 8.
regards tony

How to get Samsung F34BN movies into iMovie

I just got a Samsung F34BN for Christmas and I can't see from the instructions how to import its movies into iMovie (either 6, 8, or 9). Help OB1, your my only hope

I have a samsung hmx-h100...try this...if the camcorder came with windows software, turn it off in the camera's menu setting...if it has a memory card (like mine), once you've taken your video, connect the usb cable to your mac...the camera should mount on your desktop...double click the samsung icon, navigate to the video folder, and you should see your video clips...drag them onto the desktop...then open up your version of imovie, click import, and select the clips on your desktop...I had various degree of success doing that with imovie 6...imovie 8 handled it well...the other thing you can do if you want to use imovie 6 is use MPEG Streamclip, drag your clips into it, then export to quicktime...you should then be able to import your quicktime movie into imovie 6 and edit...

How to get Long text in IW33

Hi Everyone,
I have a requirement where I need to display the Longtext that is displayed in transaction IW33.
Its is not the KTEXT feild pf table AUFK as this feild contains data upto 40 characters.
My requirement is to fetch all the characters that are in Longtext.
There must be a table where the long text is saved.
Please let me the table ???
Regards,
Raj

Press Display Text button in front of long text.You will go to editor.Then from the munubar select Go to->Header.Use these header details:
Text Name   <Order no.>
Language        EN
Text ID         KOPF Order header text
Text Object     AUFK       Order text
Pass this to FM READ_TEXT.You can also refer the tables STXH and STXL but i guess FM will solve your problem.

How to get the text boxes and select lists dynamically?

Hi,
I have a requirement such that I need to create the text boxes and select lists depending on the user input at the run time. It means that if the user requires four text boxes/select lists then I need to have 4 such thing. If the user need 6 then I need to have 6.
The design may be such that initially only one text box/select list will be available when the page launches. Then as ad when the user asks for more those will be available to the user accordingly.
regards,
Dipankar.

You can use Ajax to call textboxes and select list based on what user enters.
Otherwise make those items conditional and based on what user enters you can display textbox or select list.
You can call Single Textbox and Select List using Ajax for any number of conditions.
Regards
Chandra

How do I convert a very long text message into a multimedia message

How do I convert a very long text message into a multimedia message

Well, you didn't mention Mac, but to my knowledge, TouchCopy works on both platforms. And, my understanding of the OP was to send each one individually, whereas WiseJD was referring to selecting them all so you could copy them all and send, rather than emailing each individual piece.
It wasn't that I thought it was rude, but that it was a complaint about something that someone said a year ago. You did not come here to ask a question, or indicate at all that you were looking for a solution to a similar question. It was just that you came on, slammed a response and left it at that. Those of us that take the time to answer people's questions as volunteers and users just like you. If you spend a great deal of time here, you will see a lot of different types of questions/comments that can get on your nerves. Here is a link for TouchCopy and it does work on both platforms. http://www.wideanglesoftware.com/touchcopy/

How do you get the text box text properties dialog box to appear on a MAC?

how do you get the text box text properties dialog box to appear in Adobe Reader XI on a MAC? I know windows is Ctrl-E but can't figure out what to hit for Mac.

Right-click the toolbar and you should find it there (including the short-cut, which is probably Cmd+E).

How do I remove text boxes from Pages

I have an awful time with Pages on my lap top. I am used to Appleworks 6.2 on my older desktop (PowerMac G4 / OS 10.4.11). If I specify a US letter page I get that in Appleworks, it is then 8.1/2" x 11", without running into pre-existing formats or other similar distractions. I can immediately type a neat business letter.
Not with Pages. On my MacBookAir, with Pages 4.3 and OS 10.8.4, I can type alright, but when I want to print what I typed, only a small part of what I typed shows up in in Print Preview of my typed page. After a bit of backtracking, I notice a blue-lined rectangle on my typed page containing the portion of my typing that appeared in that Print Preview. It is apparently a self-formed "text box", that was not a part of my blank template page and was not inserted by me while or just before I typed.
I did not find any way to delete the edges of that text box. The "delete" option under the pull down edit menu is blanked out. If I click on the "Text box " symbol in the menu bar it does not let me switch off the text box, but instead gives me another text box inside the first one! I suppose this is to allow user to print only a single keyboard stroke of the entire letter. The "Inspector" seems to have no options to set text boxes.
Pages "Help" Menu has nothing of how to delete a text box, or how to prevent it in the first place from screwing up what you have typed in such manner that it becomes unprintable.
Similarly a small rectangular box formed on both the top and the bottom of each page (which could be a space reserved for a header or footer), but again I do not use these on my business letters, and they appear self-formed by Pages, and I would like to know how to prevent them, or delete them.
In other words I like to get a blank page to start with, which will only set up and type what "I, THE USER" enter on my keyboard.
Can anybody tell me how to this with Pages?
(PS. I can do it with even with Thunderbird !)

1. Open a blank Word Processing template (they are listed in the Template Chooser sidebar), you have opened a Layout template that requires Textboxes for you to type into.
2. To select a Textbox hold down the command key and click on its edge or lassoo it, then hit delete.
3. If you don't want Headers or Footers, uncheck them in the Document Inspector
4. Download the Pages09_UserGUide.pdf from under the Help menu and familiarise yourself with Pages' basics. Also look around your Menus and Inspectors which are laid out logically from left to right from broad to details.
I suggest you click inside your textbox first go command a and copy the contents before you delete it and then paste that into a new Word Processing template.
Peter

How to create a text box in ascreen painter?

HI friends can anyone tell me how to create a text box in a screen painter?
And attachment BROWSER like what we attach for any documents in over mail.
Example when we click on browser the path of the computer has to be opened and by giving the document name attach and the document will be attached. Please tell me the procedure....
Thks

To get the best answers, I think you probably need to break down your post into several different one with a separate question in each, along with the business problem you are trying to solve... but here's a few pointers for you to research...
Textbox - there's plenty of info in SDN on creating a custom control with a textbox e.g. Re: Text Editor on modulepool Screen and sample code in SAP too.
Attachments - If this is for an email, then GUI_UPLOAD might help and the BCS class is the newer way to send messages... check out Re: Offline Approval: RBBP_NOTIFICATION_OFFAPP Vs RSWUWFMLEC for example... if this is an attachment for an SAP object such as an FI Document or Purchase Order, then the Generic Object Services (GOS) could be what you want e.g. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e6b0d95-0a01-0010-4696-ca0a48de5fb3
Jonathan

How to get Requester Login information into the request dataset validator

Friends,
I need to check whether the requester is part of a group or not before submitting the request. If not I need to throw an error.
Can you please let me know how to get Requester information.login into the request validator?

Hi Thiago,
I am getting the requester id from the requestData in the request data validator. Here is my full code for your reference.
Bikash - I even tried with RoleManager service but still same error.
public void validate(RequestData requestData)
throws InvalidRequestDataException {
tcUserOperationsIntf UserOppsIntf =Platform.getService(tcUserOperationsIntf.class);
try
tcResultSet result=UserOppsIntf.getSelfProfile();
result.goToRow(0);
String requesterID = result.getStringValue("Users.User ID");
String userKey=result.getStringValue("Users.Key");
System.out.println("Request Login:"+requesterID);
if (isMemeber(getOIMGroupKey("testGroup"),userKey))
System.out.println(requesterID+" is a Member");
else
System.out.println(requesterID+" is not a Member");
String reason = "Note[REQUEST_SUBMISSION_ERROR].text:You are not authorized to submit this request.";
throw new InvalidRequestDataException(reason);
catch(Exception e) {
e.printStackTrace();
private String getOIMGroupKey(String GroupName) throws Exception
String groupKey="";
tcGroupOperationsIntf groupInstanceOps = Platform.getService(tcGroupOperationsIntf.class);
HashMap searchFor = new HashMap();
searchFor.put("Groups.Group Name", GroupName);
tcResultSet results = groupInstanceOps.findGroups(searchFor);
for (int i = 0; i < results.getRowCount(); i++) {
results.goToRow(i);
groupKey = Long.toString(results.getLongValue("Groups.Key"));
System.out.println("GroupKey:"+groupKey);
return groupKey;
private boolean isMemeber(String groupKey,String userKey) throws Exception
boolean member=false;
try
tcGroupOperationsIntf groupInstanceOps = Platform.getService(tcGroupOperationsIntf.class);
long grpLong = Long.parseLong(groupKey.trim());
tcResultSet grpResultSet = groupInstanceOps.getAllMembers(grpLong);
for(int i=0;i<grpResultSet.getRowCount();i++)
grpResultSet.goToRow(i);
long usrKeygrp = grpResultSet.getLongValue("Users.Key");
if (usrKeygrp==Long.valueOf(userKey))
member=true;
break;
catch(Exception e) {
e.printStackTrace();
member=false;
return member;
}

How do you keep text box formatting data after saving and closing a PDF? (Acrobat XI)

I love that Acrobat XI has the feature "Edit Text & Images". It saves me and my company time when modifying PDFs for our clients. Though I am having some formatting woes...
When I insert a new text box into the document, I can span the entire text box from top to bottom of the page. I can type whatever I want in it and it makes it simple for editing later. Though, when I save the document, close it, and reopen it, all the text that was in one huge text box is broken out into multiple text boxes (per line of text). This makes it a pain to do any edits to the document because the text overlaps and does not wrap (different text boxes over one another). How can I stop this from happening? Is there a way to combine multiple text boxes maybe? What is the best solution to this issue? (running trial version of Acrobat XI on Win7 64-bit)

Why we have chosen not to use comments is due to the how jumbled they become on a page. We are basically going back and putting detailed annotations/footnotes (with numbered markers) to identify what portion of the page the functionality lives/exist. Comments also sometimes close so you cannot find them very easily...
I have just figured out with this form text field solution, I can't use underlined text...sigh...
Update: Figured out the underlined text, CTRL+I

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

How to get longer text boxes into iMovie

Similar Messages

Maybe you are looking for