How to get minimal value from children with skip missing values?

Hi,I would like to get minimum value from children, but I would like to skip missing.Minimal value from children works fine (see following formula):@MIN(@CHILDREN("member_name"));Minimal value with skip missing (see following formula) returns error:@MINSRANGE(SKIPMISSING,@CHILDREN("member_name"));Error message: "This function must be a macro".Question: How can I write a formule to get minimal value from children without missing values.What is a macro and how can I write it? If possible I would like to write formule instread of macro!Thanks,Grofaty

Hi,I have found out solution:@MINS(SKIPMISSING,@CHILDREN "member_name")); No more help is needed.Thanks,Grofaty

Similar Messages

How to get the TableRow from TableView with given row Index.

Hi ,
I want to retrieve the TableRow object or Cells of that row of the TableView, for the given row index. How i can get that.
Here is the below code what i am actually looking for
TableView table = new TableView();
table.getSelectionModel().selectedIndexProperty().addListener(new ChangeListener<Number>() {
 @Override
 public void changed(ObservableValue<? extends Number> paramObservableValue,Number prevRowIndex, Number currentRowIndex) {
 System.out.println(":::::::::> Previous Row : "+prevRowIndex+" Current Row : "+currentRowIndex);
 if(prevRowIndex.intValue()>-1){
 // TODO: Get the TableRow object of prevRowIndex or the cells in that row.
});Thanks in advance !!

Jonathan, Thanks for the info !
Actually my requirement is ,
1) I have an editable table with four columns. Where the first three colums are editable and the last column is a delete button to delete the record.
2) My requirement is such that, whenever the user edits a cell, it is not comitted on focus out but the whole row(all cells) is comitted at a time when the user hits "enter". If the validation is not successfull, the textfields are styled with error class and focuses on it.
So based on the key event on the textfield in the editable cell, i am fetching all the cells in the same row, with the below code.. and doing the save/update operation.
textBox.setOnKeyReleased(new EventHandler<KeyEvent>() {
 @Override
 public void handle(KeyEvent t) {
 if (t.getCode() == KeyCode.ENTER) {
 TableRowSkin<ContactPersonResponse> rowSkin = (TableRowSkin<ContactPersonResponse>) cell.getParent();
 ObservableList<Node> cells = rowSkin.getChildren();
 view.setCellAction(cells);
 // The setCellAction(cells) will iterate through all the cells, validates the text field,
 // if validation is success commits all the cells else styles the cells and focuses on the cell.
});Till now everything is fine and working properly.
Now I have new requirement that when the user edits a row (not yet comitted) and if he selects another row, the previous selected row should be automatically committed with validation.
So my final action is to call the setCellAction(cells) by passing the cells of the previous selected row.
table.getSelectionModel().selectedIndexProperty().addListener(new ChangeListener<Number>() {
 @Override
 public void changed(ObservableValue<? extends Number> paramObservableValue,Number prevRowIndex, Number currentRowIndex) {
 System.out.println(":::::::::> Previous Row : "+prevRowIndex+" Current Row : "+currentRowIndex);
 if(prevRowIndex.intValue()>-1){
 // TODO: Need to call the setCellAction method by passing the cells of previous selected row. (prevRowIndex)
 // Here i am not getting how to get the cells of the previous row.
});In the selectedIndex listener , i am not getting how to get the cells/row from the index.
Any solution or workaround for achieving this functionality is highly apprieciated .
Thanks & Regards,
Sai Pradeep Dandem.
Edited by: Sai Pradeep Dandem on Jan 2, 2012 10:23 PM
Edited by: Sai Pradeep Dandem on Jan 2, 2012 10:23 PM

How to get most recent consecutive records with the same value

Hi,
Can someone please help me to solve my problem?
Below is my table
Prod_Code-----Purchase_date---Inv_number-------Inv_amt
MS_AV16850------18/01/2005-----------6575947----------------7.93
MS_AV16850------22/07/2005-----------7034012----------------51.82
MS_AV16850------04/01/2006-----------8719618----------------51.82
MS_AV16850------20/06/2006-----------9515864----------------104.69
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
MS_AV16850------06/01/2008-----------1653821----------------65.49
MS_AV16850------22/02/2009-----------10866311----------------189.29
I want my query to show the rows that has most recent purchase dates with same amount in consecutive purchase date.
So from the table above, the query should display:
Prod_Code-----Purchase_date---Inv_number-------Inv_amt
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
It should not get
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
MS_AV16850------22/02/2009-----------10866311----------------189.29
because inv_number 10866311 has a prvevious inv_amount of 65.49.
and not get this
MS_AV16850------22/07/2005-----------7034012----------------51.82
MS_AV16850------04/01/2006-----------8719618----------------51.82
because they are not the most recent purchase date even if they have the same inv_amount.
Thanks in advance.

Hi,
You're right; thanks for catching my mistake.
I changed the WHERE clause of the main query (including subquery there) to deal with that situation:
WITH     got_grp          AS
     SELECT      x.*
     ,      ROW_NUMBER () OVER ( ORDER BY      purchase_date )
            - ROW_NUMBER () OVER ( PARTITION BY inv_amt
                                         ORDER BY         purchase_date )     AS grp
--     ,      ROW_NUMBER () OVER ( ORDER BY      purchase_date )     AS r1
--     ,        ROW_NUMBER () OVER ( PARTITION BY inv_amt
--                                         ORDER BY         purchase_date )     AS r2
     FROM     table_x     x
SELECT     *     -- Or list all columns except grp
FROM     got_grp
WHERE     (inv_amt, grp) IN (
                           SELECT    MAX (inv_amt) KEEP (DENSE_RANK LAST ORDER BY MAX (purchase_date))
                    ,       MAX (MAX (grp))
                            FROM      got_grp
                            GROUP BY grp
                            ,       inv_amt
                            HAVING    COUNT (*)     > 1
;Thanks, too, for posting the sample data. Apparantly, you're more interested in solving this problem than OP is.
Edited by: Frank Kulash on Nov 22, 2010 1:36 PM
The r1 and r2 columns are not needed for the solution. You may want to display them, just to help see how the query works.

How to get the best from Lightroom with my Nikon D700

I am having real trouble with the results from Lightroom from my Raw files.
I love Lightroom but am going to have to use another program unless I can figure out what to do.
Can anyone give me any advice?
I have never had to use presets etc. so am in need of basic help please.

Ed
I assume you tried to:
If you are on Mac OS X, drag the "Camera v2 beta" folder to:
/Library/Application Support/Adobe/CameraRaw/CameraProfiles
Do you have admin rights on your mac? Otherwise, I am not to up on macs, and hopefully someone with more expertise can help with the installation.
Cheers
Rory

How to get real value from selectOneChoice with javascript?

Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.

Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>

How I can stop the combo box with list of values from fireing validations

Hi I'm using Jdeveloper 11.1.2.3.0
Using Hr Schema employees table
I Display employees data in af:table
and I make List Of values on Department_id filed to easy change the employee department
and another one on Job_id filed
and Imake them UI Hints as ( combo box with list of values ) in the employeesVO
the problem is when I Select a value from department or jobs ( combo box with list of values )
fires the entire filed validations for mandatory atributes
Note : the af:table Property ( contedelivery) is set to (immediate )
How I can stop the combo box with list of values from fireing validations

check it out.,
http://andrejusb.blogspot.in/2012/09/what-to-do-when-adf-editable-table.html

How to get a formula from the user from a text box in a webpage

Hi. I would like to know how to get the formula from the user who enters in a textbox. This formula can have any number of variables starting with a and goes on.
The complexity of the formula can go upto sin, cos, ln, exp. Also user enters the minimum and maximum values of these variables. Based on a specific algorithm (which I use) I would calculate a *set of values, say 10, for each of these variables, substitute in the formula and based on the result of this formula, I select ONE suitable value for each of the variables.
I don't know how to get this formula (which most likely to be different each time) and substitute the values *which I found earlier.
Kindly help me out in this issue.
Thanks

The textbox is the easy part. It's no different than getting a String parameter out of an HTTP request.
The hard part is parsing the String into a "formula" for evaluation. You'll have to write a parser or find one.
Google for "Java math expression parser" and see what you get.
Or write your own with JavaCC.
%

How to get Date Format from Local Object.

Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web Channel

Hi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer.

How to get purchasing data from SAP R/3 to OWB (Oracle warehouse builder).

Hi,
My name is Pavan Tata. I work as a SAP BW developer. Here is the situation at my client place. Client decided to retire BW system and wants to replace with OWB(Oracle warehouse). In all this currently we have purhchasing application in BW production system and wants to move this application to OWB for the same type of reporting what they are getting currently.
Here is my question:
How to get purchasing data from SAP R/3 to OWB(Warehouse) with initial full loads and deltas mechanism in the same way as we do in BW.
Please help on this, also send me any documentation about this if you have.
Thanks,
Pavan.

Hello,
here is a short report which converts S012 entries to strings with separator semicolon. Perhaps this will help you?
Regards
Walter Habich
REPORT habitest2 LINE-SIZE 255.
TYPES:
strtab_t TYPE TABLE OF string.
CONSTANTS:
separator VALUE ';'.
DATA:
it_s012 LIKE s012 OCCURS 0,
wa_s012 LIKE s012,
strtab TYPE strtab_t,
strele TYPE string.
SELECT * FROM s012 INTO TABLE it_s012 UP TO 100 ROWS.
PERFORM data_to_string
TABLES
 strtab
USING
 'S012'. "requires it_s012 and wa_s012
LOOP AT strtab INTO strele.
WRITE: / strele.
ENDLOOP.
*& Form data_to_string
FORM data_to_string TABLES strtab TYPE strtab_t
 USING ittab TYPE any.
DATA:
 h_zaehler TYPE i,
 line_str TYPE string,
 l_tabellenname(10) TYPE c,
 l_arbeitsbereichsname(10) TYPE c,
 h_string TYPE string,
 h_char(255) TYPE c.
FIELD-SYMBOLS: <l_tabelle> TYPE ANY TABLE,
 <l_arbeits> TYPE ANY,
 <feldzeiger> TYPE ANY.
CLEAR strtab.
CONCATENATE 'IT_' ittab INTO l_tabellenname.
ASSIGN (l_tabellenname) TO <l_tabelle>.
CONCATENATE 'WA_' ittab INTO l_arbeitsbereichsname.
ASSIGN (l_arbeitsbereichsname) TO <l_arbeits>.
LOOP AT <l_tabelle> INTO <l_arbeits>.
 CLEAR: h_zaehler, line_str.
 line_str = ittab.
 DO.
 ADD 1 TO h_zaehler.
 ASSIGN COMPONENT h_zaehler OF
 STRUCTURE <l_arbeits> TO <feldzeiger>.
 IF sy-subrc <> 0. EXIT. ENDIF.
 WRITE <feldzeiger> TO h_char LEFT-JUSTIFIED. "#EC *
 h_string = h_char.
 CONCATENATE line_str separator h_string INTO line_str.
 ENDDO.
 APPEND line_str TO strtab.
ENDLOOP.
ENDFORM. "data_to_string

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get selected row from a non-bind ADF table

Hi,
I have an ADF table that is based on a collectionModel built programmatically. The collectionModel is this:
model = new SortableModel(new ArrayList<ArrayList>());
Hence, it is not a binding table. My question is how to get the selectedRows from a non-bind table.
I am used to building binding ADF table and I know we can get it from voiterator.getCurrentRow, since the selectionListener is set to the binding....collectionModel.makeCurrent
<af:table value="#{bindings.ItasLookupTypesVO1.collectionModel}"
selectedRowKeys="#{bindings.ItasLookupTypesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.ItasLookupTypesVO1.collectionModel.makeCurrent}"
</af:table>
I am thinking maybe I need to write my own selectionListener, but need more advice/ideas of what's the codes in the customer selection Listener to get it from my SortableModel.
Please help.
Thanks
-Mina

I'm not sure if this works in your case, but check out the selection listener I write in this blog http://wp.me/pcBZk-eu
You should use the selection event and check the added set. This should give you access to the selected row.
Timo

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help

I have a new iMac running iTunes 10.4 in OS 10.6.8, and a new Mac Air running iTunes 10.4 in Lion. I was able to transfer all my music etc. from the iMac onto the Air, but cannot figure out how to get the Playlists from the iMac to the Air. iTunes Help says File >Library >Export playlist and choose XML, or to save a copy of all your playlists, File > Library > Export Library, "the Exported info is saved in XML format." Then it says, "to import an iTunes playlist, File > Library > Import Playlist". Now I am assuming I do that import part on the Air, but when I try it doesn't recognize anything that can be imported - what am I missing??? Aside from a clue...

Thanks, Jim, for taking the time, but the reply is unfortunately vague in the exact area of my confusion! "you need to copy that file to your new computer..." Well, the Import/Export instructions make it seem as if the two computers should be able to communicate this file thru wifi, but that's the linkage I can't seem tocreate with Import/Export. Should I instead email a copy to myself (thats what applecare suggested)? Copy it to and from a thumb drive? But then place the file where? And the article was helpful, but should I be trying to move the Library file or the Library.xml file (as iTunes Help suggests)? Sorry to be so clueless about it...I suppose I buy Apple in the hopes of not having to think about this stuff, which approach seems not to be serving me well. Thanks again for your time!

How to enable private mode from commandline, with an URL. I am a software dev and I wish to have my application open links in Firefox. Using ShellExecute(), i c

How to enable private mode from commandline, with an URL.
I am a software dev and I wish to have my application open links in Firefox.
Using ShellExecute(), i can do with with commandlines like:
firefox.exe http://support.mozilla.org
But I also want the option to open the link in private mode.
I am able to start firefox in private mode by doing this:
firefox.exe -private
However, if I add a link to the command line
firefox.exe -private http://support.mozilla.org
I get strange results.
If firefox is not running, it launches 2 copies of the application.
One that opens in private mode and the other opens in normal mode and goes to the URL specified.
If firefox is already running, it just opens the URL in a new tab.
No private mode instance is launched.
Am I using the command-line syntax incorrectly?

It will never work if Firefox is already running as Firefox will use the already opened Firefox instance. 
In that case only using a separate profile will work.
You can try to specify the -url switch as well.
*firefox.exe -private -url http://support.mozilla.org
You can also look at the -new-tab switch.
*firefox.exe -private -new-tab http://support.mozilla.org
*https://developer.mozilla.org/en/Command_Line_Options

How to get minimal value from children with skip missing values?

Similar Messages

Maybe you are looking for