How to get MRP elements - quantity received/required
Hi all
I have a report and I need it to show the quantity received/required for each material in a plant due to MRP execution.
Basically something like MD04 showing each MRP element entry (Deliv., OI-SL, Order, etc) but a sum of quantity received and required
Do anyone knows a function, bapi, or other that can helps calculate this?
Thanks in advance
Hi,
Sometime ago I were asked to solve a similar problem.
Just try FM 'MD_ABBL_REPORTING', see if this FM meets your requirements.
Hope it helps!
Best regards,
Carlos Constantino.
Similar Messages
-
The quantity received/required for each material (only sum of Dep and Foreq
Hi all
I have a report and I need it to show the <b>quantity received/required</b> for each material (<b>only sum of Depreq and ForReq</b>) in a plant due to MRP execution.
Basically something like MD04 showing each MRP element entry (only sum of Depreq and ForReq)
Do anyone knows a function, bapi, or other that can helps calculate this?
Thanks in advanceHi srivalli,
U mean that for every material u need sum of recieved quntity and required qunatity? if this is your requirement.
Try the synax below.
Example.
itab - internal table of any sturcture. suppose itab consits of materil and quantity fiedls.
sort itab by matnr.
loop at itab.
At end of matnr.
Sum.
Write: itab-matnr, itab-menge.
ENDAT.
endloop.
This syntax will display the sum of quantity for each material.
<b>Reward if useful</b>
Any thing please reply back if you have any other doubt.
Regards,
sunil kairam. -
Can anybody tell me how to get INV available quantity of a item through API
Hello,experts.
Can anybody tell me how to get INV available quantity of a item through API?
And offer any example for this.
Thanks in advanceCheck from This table : MTL_ONHAND_QUANTITIES and MTL_ONHAND_QUANTITIES_DETAIL.
Anyway just curious, if you able to access this forum (which requires internet connection), why you can't access TRM and IREP ? -
I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?
Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide . Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part. Here is a link to HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one. To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information. Best of Luck! -
How to get Production Order Quantity
I have material number and plant. From this information how to get production order quantity that is displayed in the transaction MD04.
Thanks,
Vinay.Hi Vinay,
Have you looked FM <b>MD_STOCK_REQUIREMENTS_LIST_API</b>?
Hope this will help.
Regards,
Ferry ianto -
How to get the onhand quantity along with zero quantities in Inventory?
How to get the onhand quantity along with zero quantities in Inventory...Plz reply me as son as possible?
Hi Akshata,
In processRequest you can use pageContext.getParameter
String PartyName = pageContext.getParameter("PartyName");Regards,
Sujoy -
How to get Cost element for a component in co03 cost analysis report
Hi,
I'm using table COSP to find the quantity for a production order component. However, I need to identify the cost element first to get the unique data. In CO03 cost analysis report, there is cost element for the component. Does anyone know how to get it ?
Thanks.CSKA stores the basic info about the cost element
There is no data in CSKB.
I'm trying to use different tables to get the cost element.
AUFK, AFKO, AFPO, RESB, ...but no luck... -
How Can Get DTD elements/Attribute In java
Dear Friends,
I want to get DTD Element in java Like by using DOM parser we can get Elements/Attribute in XML.
<!ELEMENT author (#PCDATA)>
<!ATTLIST author
id (2 | 4 | 6) #REQUIRED
>
<!ELEMENT book (author, page)>
<!ATTLIST book
id (1 | 2 | 3 | 4) #REQUIRED
name CDATA #REQUIRED
>
<!ELEMENT library (book+)>
<!ELEMENT page (#PCDATA)>
By Example
i wants i can get elements library -> childs are book
book child have Attributes id and name..
how can i get .
pls help me
with regards
Siddharth singhBuild an XML-ORM then integrate it into the DOM, then have a nice day.
-
How to get the Deliver Quantity against Schedule Line Quantity
Hi,
I have specific requirement for a report where we need to determine the delivery qty against the schedule line qty for a sales order. In sales order in schedule line tab system shows the delivery qty. The field is VBEPD-VSMNG. VBEPD is a structure and I could not find the table in which this is actually stored. Does anybody know how to get the delivery qty for schedule line?Hi,
U can check the following tables:
VBEP (Sales ScheduleLines) VBEP-VBELN =VBAP-VBELN and VBAP-POSNR = VBEP-POSNR
LIPS (SalesDoc:Delivery Items) LIPS-VGBEL =VBAP-VBELN and LIPS-VGPOS =
VBAP-POSNR
VBEH (Schedule LineHistory) VBELN POSNR ETENR
Regards
Kannaiah -
How to get sum of quantity column in table control
Hi, expert ,
Someone can guide me how to get som of qty column in table control ?
I created a screen with a table control and has a qty quantity field .
I want to show total of qty in a field .
my code like this ...
PROCESS AFTER INPUT.
LOOP AT I_tab.
CHAIN.
FIELD I_tab-COUNTQTY MODULE caculate_total_qty .
endchain.
MODULE UPDATE_TOTAL_QTY .
ENDLOOP.
but, when I Back to the previous screen
It's caculate again so I always get wrong Total quantity .
anyone can help me ...Hi , Dhina
I have another question .
I use internal table data in table control to update database table .
The data in the db will be change ,
but each record I want to delete in table control , it's still exist in database .
my code is
WHEN 'SAVE'
MODIFY YDSGBT53 FROM TABLE I_YDSGBT53 .
COMMIT WORK .
END CASE
How to fix my code and let it can change and delete data in database ?
or
when I delete record in table control I must to delete data in the database too .
Edited by: TitusFang on Jun 16, 2011 3:21 AM -
How to get the elements out of a for loop simultaneously during the loop execution
Hi,
I am student. I would like to know how to get the counter values outside the For loop parallely while the loop runs rather that getting the finally value outside the For loop. Looking forward for answers.
Thanks,
Athira
Solved!
Go to Solution.You could use a notifier (since it is a single value) or a reference (with a property node) to a control that gets the value elsewhere in another VI.
If it is within the same VI, you could use a property node (right click > create > property node > value) from the control within the same VI located outside the loop.
If you promiss NOT to abuse the use of Local Variables, you could use that to only write from ONE location within the For Loop to a control outside the loop, similar to the property node mentionned earlier. (Of course, I will be struct by lightening for mentionning that and scolded by other LabVIEW coders for having a change of heart on the use of Locals.... Shivers are already crawling up my spine).
You could use a queue, but that might be an overkill, unless: the count is generated faster than it is being read elsewhere...
As crossrulz mentionned, can you describe what you will be doing with the count? Because synchronizing data (fresh / stale / etc) is very important within LabVIEW as it executes based on dataflow rather than a sequential order.
Hope this helps.
EDIT:
You have not fully provided the answer. We figured that much of your code from your description, but what is reading the value of the count? Is it in a separate loop? If not, it may only deal with the first value, which is likely 0. The proper advice depends on how you process the received data (count). -
How to get the planned quantity of past month from md61
Hi all,
I couldnt get the planned quantity of past month from the tcode md61.It shows only the current and future month's demand.I want to know the planned quantity of past month's.
I have checked PBIM,PBED,PBHI tables,here also I am facing the same problem.
Is it possible to get past month quantity from md61? If No how to know the quantity planned for past month?...Please tel your ideas..
Thanks in Advance!!!
Edited by: Ranganayahi Chandirasekaran on Jul 30, 2008 8:17 AMHi,
You can check History of PIR through MD62 itself.
Select particular row, Goto Menu, Select Item History(Shift +F6).
Or
You may pls execute transaction MD73.
Plz select option "3 :History Planned ind reqmnts " in the display options and execute the report.
Regards,
R.Brahmankar -
How to get one element of a database with database toolkit
I am working with an access database in which I want to store information about all the computers that recide in a network. The information that I will store in this database is computer's IP address, computer name, etc. Now I want to look in my database the ip address of the computers and get the ip of every one as a string. What I'm trying to do is to convert the output variant of the block "get" to a two dimensional array for then convert it to a matrix in which I can get the elements one by one. Attached is the vi in which I'm working. If you can help me to figure out how to solve my problem I'll be very happy and if I am not in the indicated discussion forum please guide me to find the correct one.
Attachments:
Getting just one element.vi 11 KBWell I found this post that answered my question
http://forums.ni.com/t5/LabVIEW/how-to-get-recordset-from-database/m-p/1471374?requireLogin=False -
How to get calculated component quantity for BOM like in CS12
Hi All,
Please let me know how to get the calculated component quantity of BOM similar to the field in CS12.
Regards
Maheshhi,
[http://www.sap-topjobs.com/SpecialPP/overviewdoc1.pdf] -
[AS][CS4] How to get XML element of grep find result?
Hi,
Does anyone know how to get the xml element of a grep find result?
I have multiple text frames, each containing multiple paragraphs. Each paragraph can contain one or more different xml tagged pieces of text.
Using a simple search function I can locate the text I need, but how do I retreive the xml element applied to that piece of text.
Using the "associated XML element" property, it doesn't work.
set find what of find grep preferences to "€( )*(\\d)*"
tell active document
set myResult to find grep
set myItem to item 1 of myResult
set myElement to associated XML element of myItem
-- The last line throws an error
end tell
The find result will return a collection of text objects.
Thanks
JohnWell I found this post that answered my question
http://forums.ni.com/t5/LabVIEW/how-to-get-recordset-from-database/m-p/1471374?requireLogin=False
Maybe you are looking for
-
Mail to File: Use filename from MailBody to store attachement on filesystem
Hi I have a Mail to File scenario. The mail contains a body and one binary attachment. The goal is to store the binary attachment on the filesystem with a specific filename which should come from the mail body. So I have to use PayloadSwapBean to hav
-
How can I get a passage highlighted in yellow in a word document sent to Adobe Reader?
How can I get a passage highlighted in yellow in a word document sent to Adobe Reader?
-
Problem uploading reports from CR XI to R3.1
Hi, I'm running into an issue trying to upload a report from CRXI (desktop) to our R3.1 server. The R3.1 install was done on the system drive (C:\), but we have tried to point the FRS to a FileStore directory on a secondary drive (D:\). Both are loc
-
Quicktime 7 OS status error -50 when opening a movie.
Have reinstalled quicktime 7, think there's some conflict. Have tried rereinstalling, updating, copying application from another computer. But quicktime 7 just won't play anything! Think there's a file corrupted somewhere.... not sure where to check.
-
Is there an easy conversion process from iMac to power mac?
I'm thinking of moving off my old iMac and onto a PowerMac - is there an easy conversion utility? I'm pretty new in the space here...