The quantity received/required for each material (only sum of Dep and Foreq

Hi all
I have a report and I need it to show the quantity received/required for each material (only sum of Depreq and ForReq) in a plant due to MRP execution.
Basically something like MD04 showing each MRP element entry (only sum of Depreq and ForReq)
Do anyone knows a function, bapi, or other that can helps calculate this?
Thanks in advance

Hi srivalli,
U mean that for every material u need sum of recieved quntity and required qunatity? if this is your requirement.
Try the synax below.
Example.
itab - internal table of any sturcture. suppose itab consits of materil and quantity fiedls.
sort itab by matnr.
loop at itab.
At end of matnr.
Sum.
Write: itab-matnr, itab-menge.
ENDAT.
endloop.
This syntax will display the sum of quantity for each material.
Reward if useful
Any thing please reply back if you have any other doubt.
Regards,
sunil kairam.

Similar Messages

How to get MRP elements - quantity received/required

Hi all
I have a report and I need it to show the quantity received/required for each material in a plant due to MRP execution.
Basically something like MD04 showing each MRP element entry (Deliv., OI-SL, Order, etc) but a sum of quantity received and required
Do anyone knows a function, bapi, or other that can helps calculate this?
Thanks in advance

Hi,
Sometime ago I were asked to solve a similar problem.
Just try FM 'MD_ABBL_REPORTING', see if this FM meets your requirements.
Hope it helps!
Best regards,
Carlos Constantino.

Average Daily Requirement for a Material

I'm looking for a function module or BAPI that will calculate the average daily requirement for a material. Please point me in the right direction where I can obtain this calculation.
Thanks

I found this thread while performing a search. While it is old, I thought it a good idea to provide the solution in case others are looking for the answer in the future. Use FM MD_STOCK_REQUIREMENTS_LIST_API. Table MDSUX will contain the average daily requirement as well as other useful data like target stock.

HT202239 This computer does not meet the recommended system requirements for 3D titles.

Hey guys.
Today I downloaded FCP 10.2 and when enabling 3D text this message appeared "This computer does not meet the recommended system requirements for 3D titles". I ignored it and continued working on the 3D text, everything looked fine. Could someone tell me what the difference is when working on a not compatible computer?
Thanks!
www.lightbroscreative.com

Tech specs for 10.2
256MB of VRAM (1GB recommended for 4K editing and 3D titles)
I guess you have the minimum to download, but VRAM isn't enough for 3D.

HT3986 i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assemb

i purchased windows 7 from amazon and i just received it. they sent me windows 7 home premium "OEM System Builder Pack". the instructions say "Intended for system builders only". also says " must be per installed on the hard drive of a fully assembled computer system, using the OEM Preinstallation kit (OPK)."

System Builder - just be sure to get 64-bit version, no one needs or wants 32-bit today, and only comes with one, while retail ships with both 32/64-bit media.
you can't install it and activate on different hardware later is all, and by then for what you saved, so what, Windows 8 or SP2 will be out.
A few people had trouble with Windows 7 SP1 for some reason and not sure exactly why, changes to the boot loader on the DVD I presume.

Ship to party for each material using BAPI_SLSTRANSACT_CREATEMULTI

i am able to generate sales order for in CRM. I am inputting the sold to party, ship to party, bill to party and payer at the header level...
CRM is currently configured in such a way that , there is a provision to assign ship to party at item level for each material.
How can i programatically replicate this? I need to assign a diiferent ship to party for each material in the sales order.*
how can i programatically replicate this?...
this is my code for cresating a sales order in CRM with sold to party, ship to party, bill to party and payer at the header level...
*************include constants
include crm_direct.
************// GUIDs
data:         lv_guid_h type GUID_32,              "HEADER GUIDE
                lv_guid_i type GUID_32,              "ITEM GUIDE
                lv_guid_sl type GUID_32,             "SCHEDULE LINE GUIDE
                lv_guid_p type GUID_32.              "PARTNER GUIDE
***********// Handles
data:        lv_current_handle type crmt_handle,    "CURRENT HANDLE
               lv_handle_h type crmt_handle,          "HEADER HANDLE
               lv_handle_i type crmt_handle,          "ITEM HANDLE
               lv_handle_sl type crmt_handle,         "SCHEDULE LINE HANDLE
               lv_handle_p type crmt_handle.          "PARTNER HANDLE
***********// Administration header + item + etc
data:        lt_salesorder_header type table of bapibus20001_header_ins,        "LT_SALESORDER_HEADER
               ls_salesorder_header type bapibus20001_header_ins,                 "LS_SALESORDER_HEADER
               lt_salesorder_item type table of bapibus20001_item,                "LT_SALESORDER_ITEM
               ls_salesorder_item type bapibus20001_item,                         "LS_SALESORDER_ITEM
               lt_scheduleline type table of BAPIBUS20001_SCHEDLIN,               "LT_SCHEDULELINE
               ls_scheduleline type BAPIBUS20001_SCHEDLIN,                        "LS_SCHEDULELINE
               lt_partner type table of BAPIBUS20001_PARTNER_INS,                 "LT_PARTNER
               ls_partner type BAPIBUS20001_PARTNER_INS,                          "LS_PARTNER
               ls_logical_key TYPE crmt_partner_logic_partner_key,                "LS_LOGICAL_KEY
               lt_organisation type table of BAPIBUS20001_ORGMAN_INS,             "LT_ORGANISATION
               ls_organisation type BAPIBUS20001_ORGMAN_INS.                      "LS_ORGANISATION
*********// Saved sales orders
data: lt_saved_process type table of bapibus20001_object_id,                   "LT_SAVED_PROCESS
data:
        ls_saved_process type bapibus20001_object_id,                             "LS_SAVED_PROCESS
        ls_salesorder type CRMT_RETURN_OBJECTS_STRUC.                             "LS_SALESORDER
data: lt_input_fields type table of bapibus20001_input_fields,                  "LT_INPUT_FIELDS
        ls_input_fields type bapibus20001_input_fields,                           "LS_INPUT_FIELDS
        ls_return type bapiret2.                                                  "LS_RETURN
data: lt_return type table of bapiret2.                                        "LT_RETURN
***********// Macro definition to populate structure and input field This, called as
*_set_field ls_salesorder_header GUID lv_guid_h
*is exploded as
      ls_salesorder_header-GUID            =        lv_guid_h.
      ls_input_fields-fieldname            =        'GUID'.
      append ls_input_fields to lt_input_fields.
*Note 1: &2 (field name) MUST be uppercase
*Note 2: for the salesorder header, Macro has not been used to show how the code should look like.
*except for that the macro has been used everywhere else.
     define setfield.
          &1-&2 = &3.
          ls_input_fields-fieldname = '&2'.
          append ls_input_fields to lt_input_fields.
    end-of-definition.
*****// end of macro definition
******// fill order administration header
    perform get_guid changing lv_guid_h.
    add 1 to lv_handle_h.
    ls_salesorder_header-guid = lv_guid_h.
    ls_salesorder_header-handle = lv_handle_h.
    ls_salesorder_header-process_type = 'ZWEB'.
    clear ls_input_fields.
    ls_input_fields-ref_handle = lv_handle_h.
    ls_input_fields-ref_guid = lv_guid_h.
*ls_input_fields-ref_kind = gc_object_ref_kind-orderadm_h.
    ls_input_fields-objectname = gc_object_name-orderadm_h.
    ls_input_fields-fieldname = 'GUID'.
    append ls_input_fields to lt_input_fields.
    ls_input_fields-fieldname = 'HANDLE'.
    append ls_input_fields to lt_input_fields.
    ls_input_fields-fieldname = 'PROCESS_TYPE'.
    append ls_input_fields to lt_input_fields.
    append ls_salesorder_header to lt_salesorder_header.
**********// fill organisation data (Interface needs this, some times may rely on sales org determination instead...
    clear ls_input_fields.
    ls_input_fields-ref_handle          =      lv_handle_h.
    ls_input_fields-ref_guid            =      lv_guid_h.
    ls_input_fields-ref_kind            =      gc_object_ref_kind-orderadm_h.
    ls_input_fields-objectname          =      gc_object_name-orgman.
    setfield      ls_organisation    REF_GUID         lv_guid_h.
    setfield      ls_organisation    REF_HANDLE       lv_handle_h.
    setfield      ls_organisation    REF_KIND         gc_object_ref_kind-orderadm_h.
    setfield      ls_organisation    SALES_ORG_RESP   SO_RESP .                                 "(input).
    setfield      ls_organisation    SALES_ORG        SALES_ORG.                                "(input).
    setfield      ls_organisation    DIS_CHANNEL      DIS_CHNL.                                 "(input).
    setfield      ls_organisation    DIVISION         DIVISION.                                 "(input).
    append ls_organisation to lt_organisation.
**********// fill order administration item
perform get_guid changing lv_guid_i.
lv_handle_i = lv_handle_h.
add 1 to lv_handle_i.
clear ls_input_fields.
ls_input_fields-ref_guid            =        lv_guid_i.
ls_input_fields-ref_handle          =        lv_handle_i.
*ls_input_fields-ref_kind             =        gc_object_ref_kind-orderadm_i.
ls_input_fields-objectname          =        gc_object_name-orderadm_i.
setfield      ls_salesorder_item      GUID               lv_guid_i.
setfield      ls_salesorder_item      HEADER             lv_guid_h.
setfield      ls_salesorder_item      HANDLE             lv_handle_i.
setfield      ls_salesorder_item      HEADER_HANDLE      lv_handle_h.
setfield      ls_salesorder_item      ORDERED_PROD       PRODUCT .                           "(input).
setfield      ls_salesorder_item      ITM_TYPE           'ZTAN'.
setfield      ls_salesorder_item      MODE               'A'.
*adjustment taken from standard include LCMS_MAPPERF04
*(see where-used-list for BAPI_SLSTRANSACT_CREATEMULTI, program LCMS_MAPPERU11)
delete lt_input_fields where fieldname = 'HANDLE'
OR
fieldname      =    'HEADER_HANDLE'.
append ls_salesorder_item to lt_salesorder_item.
********// fill schedule line for item
perform get_guid changing lv_guid_sl.
add 1 to lv_handle_sl.
clear ls_input_fields.
ls_input_fields-ref_guid          =        lv_guid_i.
ls_input_fields-ref_handle        =        lv_handle_i.
ls_input_fields-ref_kind          =        gc_object_ref_kind-orderadm_i.
ls_input_fields-objectname        =        gc_object_name-schedlin.
setfield       ls_scheduleline       ITEM_GUID       lv_guid_i.
setfield       ls_scheduleline       GUID            lv_guid_sl.
setfield       ls_scheduleline       HANDLE          lv_handle_sl.
setfield       ls_scheduleline       ITEM_HANDLE     lv_handle_i.
setfield       ls_scheduleline       QUANTITY        quantity.                        "(input).
append ls_scheduleline to lt_scheduleline.
********// fill partner line
*perform get_guid changing lv_guid_p.
*the partner use the logical key as well
ls_logical_key-ref_partner_handle = '0001'.
clear ls_input_fields.
ls_input_fields-ref_guid       =       lv_guid_h.
ls_input_fields-ref_handle     =       lv_handle_h.
ls_input_fields-ref_kind       =       gc_object_ref_kind-orderadm_h.
ls_input_fields-objectname     =       gc_object_name-partner.
ls_input_fields-logical_key    =       ls_logical_key.
setfield       ls_partner       REF_GUID                   lv_guid_h.
setfield       ls_partner       REF_HANDLE                 lv_handle_h.
setfield       ls_partner       REF_KIND                   gc_object_ref_kind-orderadm_h.
setfield       ls_partner       REF_PARTNER_HANDLE         '0001'.
setfield       ls_partner       KIND_OF_ENTRY              'C'.
setfield       ls_partner       PARTNER_FCT                '00000001'.
setfield       ls_partner       PARTNER_NO                 SOLD_TO.                                "(input).
setfield       ls_partner       NO_TYPE                    'BP'.
setfield       ls_partner       DISPLAY_TYPE               'BP'.
move-corresponding ls_partner to ls_logical_key.
append ls_partner to lt_partner.
ls_logical_key-ref_partner_handle        =       '0002'.
clear ls_input_fields.
ls_input_fields-ref_guid                 =         lv_guid_h.
ls_input_fields-ref_handle               =         lv_handle_h.
ls_input_fields-ref_kind                 =         gc_object_ref_kind-orderadm_h.
ls_input_fields-objectname               =         gc_object_name-partner.
ls_input_fields-logical_key              =         ls_logical_key.
setfield          ls_partner           REF_GUID                   lv_guid_h.
setfield          ls_partner           REF_HANDLE                 lv_handle_h.
setfield          ls_partner           REF_KIND                   gc_object_ref_kind-orderadm_h.
setfield          ls_partner           REF_PARTNER_HANDLE         '0002'.
setfield          ls_partner           KIND_OF_ENTRY              'C'.
setfield          ls_partner           PARTNER_FCT                '00000002'.
setfield          ls_partner           PARTNER_NO                 SHIP_TO .                                "(input).
setfield          ls_partner           NO_TYPE                    'BP'.
setfield          ls_partner           DISPLAY_TYPE               'BP'.
move-corresponding ls_partner to ls_logical_key.
append ls_partner to lt_partner.
ls_logical_key-ref_partner_handle = '0003'.
clear ls_input_fields.
ls_input_fields-ref_guid             =           lv_guid_h.
ls_input_fields-ref_handle           =           lv_handle_h.
ls_input_fields-ref_kind             =           gc_object_ref_kind-orderadm_h.
ls_input_fields-objectname           =           gc_object_name-partner.
ls_input_fields-logical_key          =           ls_logical_key.
setfield         ls_partner            REF_GUID                   lv_guid_h.
setfield         ls_partner            REF_HANDLE                 lv_handle_h.
setfield         ls_partner            REF_KIND gc_object_ref_kind-orderadm_h.
setfield ls_partner REF_PARTNER_HANDLE '0003'.
setfield ls_partner KIND_OF_ENTRY 'C'.
setfield ls_partner PARTNER_FCT '00000003'.
setfield ls_partner PARTNER_NO BILL_TO ."(input).
setfield ls_partner NO_TYPE 'BP'.
setfield ls_partner DISPLAY_TYPE 'BP'.
move-corresponding ls_partner to ls_logical_key.
append ls_partner to lt_partner.
ls_logical_key-ref_partner_handle = '0004'.
clear ls_input_fields.
ls_input_fields-ref_guid = lv_guid_h.
ls_input_fields-ref_handle = lv_handle_h.
ls_input_fields-ref_kind = gc_object_ref_kind-orderadm_h.
ls_input_fields-objectname = gc_object_name-partner.
ls_input_fields-logical_key = ls_logical_key.
setfield ls_partner REF_GUID lv_guid_h.
setfield ls_partner REF_HANDLE lv_handle_h.
setfield ls_partner REF_KIND gc_object_ref_kind-orderadm_h.
setfield ls_partner REF_PARTNER_HANDLE '0004'.
setfield ls_partner KIND_OF_ENTRY 'C'.
setfield ls_partner PARTNER_FCT '00000004'.
setfield ls_partner PARTNER_NO PAYER ."(input).
setfield ls_partner NO_TYPE 'BP'.
setfield ls_partner DISPLAY_TYPE 'BP'.
move-corresponding ls_partner to ls_logical_key.
append ls_partner to lt_partner.
*******// example of a second partner function (custom) with data override
*ls_logical_key-ref_partner_handle = '0002'.
*clear ls_input_fields.
*ls_input_fields-ref_guid = lv_guid_h.
*ls_input_fields-ref_handle = lv_handle_h.
*ls_input_fields-ref_kind = gc_object_ref_kind-orderadm_h.
*ls_input_fields-objectname = gc_object_name-partner.
*ls_input_fields-logical_key = ls_logical_key.
*_set_field ls_partner REF_GUID lv_guid_h.
*_set_field ls_partner REF_HANDLE lv_handle_h.
*_set_field ls_partner REF_KIND gc_object_ref_kind-orderadm_h.
*_set_field ls_partner REF_PARTNER_HANDLE '0002'.
*_set_field ls_partner KIND_OF_ENTRY 'B'. "manual entry...
*_set_field ls_partner PARTNER_FCT customFct(input).
*_set_field ls_partner PARTNER_NO bpNumber(input).
*_set_field ls_partner NO_TYPE 'BP'.
*_set_field ls_partner DISPLAY_TYPE 'BP'.
*_set_field ls_partner TITLE 'Mr.'.
*_set_field ls_partner FIRSTNAME 'John'.
*_set_field ls_partner LASTNAME 'Smith'.
*_set_field ls_partner STR_SUPPL1 'John Smith and Co'.
*_set_field ls_partner STREET 'Street1'.
*_set_field ls_partner STR_SUPPL3 'Street4'.
*_set_field ls_partner HOUSE_NO '42'.
*_set_field ls_partner CITY 'Townville'.
*_set_field ls_partner DISTRICT 'Districtshire'.
*_set_field ls_partner POSTL_COD1 'AA1 2BB'.
*note now ...
*adjustment taken from standard include LCMS_MAPPERF04
*(see where-used-list for BAPI_SLSTRANSACT_CREATEMULTI, program LCMS_MAPPERU11)
*I don't use macro because name of the field in input_table is different
*_set_field ls_partner COUNTRYISO 'GB'.
*instead
ls_partner-COUNTRYISO = 'GB'.
ls_input_fields-fieldname = 'COUNTRY'.
append ls_input_fields to lt_input_fields.
*_set_field ls_partner LANGU_ISO 'EN'.
ls_partner-LANGU_ISO = 'EN'.
ls_input_fields-fieldname = 'LANGU'.
append ls_input_fields to lt_input_fields.
move-corresponding ls_partner to ls_logical_key.
append ls_partner to lt_partner.
*Create sales orders *
call function 'BAPI_SLSTRANSACT_CREATEMULTI'
    EXPORTING
      testrun       = false
    TABLES
      header        = lt_salesorder_header[]
      item          = lt_salesorder_item[]
      partner       = lt_partner[]
      organisation = lt_organisation[]
      input_fields = lt_input_fields[]
      scheduleline = lt_scheduleline[]
      saved_process = lt_saved_process[]
      return        = lt_return[].
*************// get the GUID of the created object
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
    WAIT          = 'X'
IMPORTING
    RETURN        = lt_return1.
INCLUDE ZZGVBAPISALESORDER_GET_GUIDF01.
Edited by: jessica sam on Dec 22, 2008 4:25 PM
Edited by: jessica sam on Dec 22, 2008 4:27 PM
Edited by: jessica sam on Dec 22, 2008 7:05 PM
Edited by: jessica sam on Dec 23, 2008 5:18 AM

I know how to trace the Ship to party at line item. When i create an order manually on CRM then the table CRMD_PARTNER has the required entries and the Ship to party at line item is getting populated correctly. Also if i open the order in CRMD_ORDER the ship pto party are being populated correctly at line item..
But if i am trying to replicate this programatcally using the BAPI, i see that the ship to at header is being copied to each line item and this is not what is expected.
If i go and check in the CRMD_PARTNER the data is not filled
correctly as I dont have any ship to party at line item
So finally I even tried to insert the data manually in the CRMD_PARTNER table using an
INSERT statement and even that doesnt work...
https://www.sdn.sap.com/irj/scn/forums
So i am unable to ficgure out what is going wrong
Any body if they have any idea on poulating ship to party programatically in
sales order for each line item please help
I am unable to figure out how to fill PArtner table of this BAPI to populate ship to at line item level
Kindly Help..
Regards,
Jessica Sam

Print out of line item wise tax for each material code.

hello all,
Requirement is that my client want to print tax of all item in purchase order seperatelyi.e.line item wise tax for each material type.
is there any standard procedure available in sap?
Your valuable input will be apperciable.
Regards
sumit bisla

Take the help from ABAPer and give your requirment to print the tax at item level.

Selecting many records for each material...

Hi all,
I have an internal table that contains a list of materials. I want to loop over that list and retrieve a group of purchase reqs from EBAN for each material...appending each group of rews to my req table for each pass over the material list. Sample code;
LOOP AT GT_MATERIALS INTO WA_MATERIALS.
SELECT MENGE LFDAT
 INTO CORRESPONDING FIELDS OF TABLE GT_EBAN_FIELDS
 FROM EBAN
 WHERE MATNR EQ WA_MATERIALS-MATNR.
 ???DO I DO AN APPEND OF SOME KIND HERE???
ENDLOOP.
Regards,
Mat

Hi Mathew,
From performance point of view, the SELECT QUERY should not be under a loop. So you can do the following :
SORT GT_MATERIALS.
IF not gt_materials is initial.
SELECT MENGE LFDAT
INTO CORRESPONDING FIELDS OF TABLE GT_EBAN_FIELDS
FROM EBAN
FOR ALL ENTRIES IN GT_MATERIALS
WHERE MATNR EQ GT_MATERIALS-MATNR.
ENDIF.
Also if the structure of table GT_EBAN_FIELDS has only two fields MENGE, LFDAT then please remove INTO CORRESPONDING FIELDS, instead use INTO TABLE GT_EBAN_FIELDS. This is becz INTO CORRESPONDING FIELDS would affect the performance.
Best regards,
Prashant

Excise invoice quantity cannot be less than the quantity received

Hi,
I have done MIGO with part 1 entry but while doing J1IEX, I am getting an error message 4F109 : Excise invoice quantity cannot be less than the quantity received.
Please note that we have done MIGO with 5000 qty. and doing J1IEX with short 3000 qty.
Regards.

Hi,
For this case of "Part I" selected during GR, you need to create Excise invoice thro J1IEX -> Capture Excise Invoice -> Good receipt (use the material document number), which will complete the part II posting. Then you can proceed with MIRO.
With regards,
Jeeva.

One PR for Each Material

Dear friends
When i run Forecast based MRP in a Hotel, i am getting One P.R for every material, i having more than 2000 materials,. Can u pl guide me how can i combine the purchase requisition. what are the settings needed to avoide one P.R for each material.
Thanks
Shivani

Shivani,
MRP is a planning tool, which processes one part number at a time. It is not designed to manage your client's requirements to consolidate purchase requisitions across multiple part numbers.
If your client requires that purchase requisitions be consolidated, then that is a custom requirement and will require custom programming. Get the detailed specs from the client and submit them to an ABAP'er. It would be a simple matter for a custom program to select specified purchase reqs, and consolidate them into a smaller number of reqs, and then delete the original reqs that are no longer needed.
Rgds,
DB49

Function Module to know the Acc doc no for a Material document.

Dear Friends,
What is the Function Module to know the Acc doc no for a Material document? Please help. Thanks in advance.
Regards,
RAMAN

Hi Raman,
I am not sure about your requirement,
But i remember when i required the same like you i went to vrpma table to get the account document,
I just did like a blind fold,
as my company does all the billing accounts in the same month, my search criteria was blind.
Also try with MKPF-XBLNR with the VBRK-XBLNR and get VBRK-VBELN
from there goto BSEG.
Thansk & regards,
Dileep .C

Assign different ship to party for each material in a sales order in CRM?

Hi all,
I need to create a sales order in CRM, such that the sales order contains more than 100 materials at item level and each material should be shipped to a different ship to party.
That is for 100 materials in sales order I need to ship to 100 different customers.
The 100 ship to partyu2019s are maintained for the business partner in relation ships tab in /nBP.
The CRM configuration is done in such a way that when we enter a material while creating a sales order in CRM,u2026u2026.a window pops up asking us to select the ship to party for that material.
No I need to replicate this programmatically. I generated a sales order in CRM programmatically using BAPI_SLSTRANSACT_CREATEMULTI. u2026 Now I need to make changes such that I have a provision to assign ship to party for each materialu2026
How can I do this? Can any one tell me if there is a BAPI or Function Module available so that I can assign a different ship to party for each material in sales order?
Regards,
Jessica Sam

Here is sample code. In that highlighted portion is different. check this out
DATA: ls_partner TYPE crmt_partner_com,
        ls_input_fields TYPE crmt_input_field,
        lt_fieldname TYPE crmt_input_field_names_tab,
        ls_fieldname LIKE LINE OF lt_fieldname.
ls_partner-ref_handle = p_iv_handle.
ls_partner-ref_partner_handle = 1.
ls_partner-ref_kind = 'A'.
ls_partner-display_type = 'BP'.
ls_partner-no_type = 'BP'.
ls_partner-kind_of_entry = 'C'.
licensee
ls_partner-partner_fct = '00000069'.
ls_partner-partner_no = w_but000-partner.
INSERT ls_partner INTO TABLE gt_partner.
Bill to party
IF NOT w_con_header-billtoparty IS INITIAL.
    ls_partner-partner_fct = '00000003'.
    ls_partner-partner_no = w_but001-partner.
    INSERT ls_partner INTO TABLE gt_partner.
ENDIF.
IF w_con_header-billtoparty IS INITIAL.
    ls_partner-partner_fct = '00000003'.
    ls_partner-partner_no = w_but000-partner.
    INSERT ls_partner INTO TABLE gt_partner.
ENDIF.
Employee
ls_partner-partner_fct = '00000014'.
ls_partner-partner_no = w_con_header-empresp.
INSERT ls_partner INTO TABLE gt_partner.
+*lsinput_fields-ref_handle = p_iv_handle.*+_
+*lsinput_fields-ref_kind = 'A'.*+_
ls_input_fields-logical_key = ls_partner-ref_partner_handle.
ls_input_fields-objectname = 'PARTNER'.
ls_fieldname-fieldname = 'DISPLAY_TYPE'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'KIND_OF_ENTRY'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'NO_TYPE'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'PARTNER_FCT'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_fieldname-fieldname = 'PARTNER_NO'.
INSERT ls_fieldname INTO TABLE lt_fieldname.
CLEAR ls_fieldname.
ls_input_fields-field_names = lt_fieldname.
INSERT ls_input_fields INTO TABLE gt_input_fields.

What's the mA Charging Requirement for 2nd Generation? What is the maximum?

It appears that the minimum charging requirement for the 2nd generation is 500ma and the optimum is 1000ma (1A). Can anyone confirm that for me? I can't find any specifications anywhere.
Also, will using a high power USB charger cause any harm to the Touch's charging circuit? I can pick up a USB charger (which is part of an international power adapter kit) that has a rating of 2.5A.
It would be a great way to charge the Touch assuming that it doesn't cause any damage, and the only reason I'm considering it is that it's 70% off at the Circuit City clearance. (R.I.P. CC)
Thanks.

The spec for USB 2.0 high power is a minimum of 500mA.
Also, will using a high power USB charger cause any harm to the Touch's charging circuit?
No.
Electronic devices will only take what current they need.
As an example, the outlets in your house are 15 Amps but none of your electronics draw anywhere near that amount.

How to find out the Idoc number triggered for any material transfer frm SAP

Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.

Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish

Do we need to buy the license from SAP for EACH 'Z'form

Hello
I heard that, we (company) have to take license for the development of EACH adobe interactive form (even though its totally custom brand-new interactive form created from scratch), on individual form basis, is it true? (i know, its free of cost to play around with interactive forms in DEV and QA, but, if we want to move them to PROD, in that case do we need to buy the license from SAP for EACH form individually?)
Thank you

Thats true...license based on end user usage is required for SAP interactive forms. For more information read SAP note number 750784. The license comes in package like per 1000 users one time payment.
Regards,
Vaibhav

The quantity received/required for each material (only sum of Dep and Foreq

Similar Messages

Maybe you are looking for