How to get my threads beyond 60 days?

Hi,
I need to access my threads beyond 60 days.
Thanks!

Hi,
Currently there isn't a good way to do this. The last forum update limited the My Threads view to 60 days only.
There have been some proposed workarounds, such as using the My Alerts view - but that only works if you've set alerts on all of your threads. People also have suggested using a search engine and targeting the search to social.technet.microsoft.com or social.msdn.microsoft.com.
Personally I have had zero luck with either of these methods.
I see you've already joined in on
my thread in the suggestions forum, but you can also try using the Site Feedback link at the bottom of the page (TechNet branding only, this link doesn't appear if you're viewing this thread in the MSDN branding) to send in a request directly.
I really hope Microsoft will change course on this one, but I'm not holding my breath.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

Similar Messages

  • How to get total number of days

    Hi All,
    how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
    and how to get total number of days in a month.
    Thank You,,
    Sriii..

    Hi Sridhar,
    Pls Try to search before posting general questions.
    Try this,
    CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
        EXPORTING
          i_datum_bis                   = p_lv_date1
          i_datum_von                   = p_lv_date2
       IMPORTING
         e_tage                        = p_e_date_difference
       EXCEPTIONS
         days_method_not_defined       = 1
         OTHERS                        = 2
      IF sy-subrc  0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    Regards,
    Sunil kairam.

  • How to get each thread in the threadpool

    Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
    1) How to get each thread in the threadpool;
    2) How to get each thread's data in the threadpool and dispaly them onto GUI;
    e.g :
    There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?

    Willings wrote:
    Hi,everyone.I'm now learning java.util.concurrent package and I have two questions about the threadpool.
    1) How to get each thread in the threadpool;You don't
    2) How to get each thread's data in the threadpool and dispaly them onto GUI;
    e.g : You don't
    There are 5 threads in the threadpool(ThreadPoolExecutor) and I have 100 tasks(Runnable or Callable),every task scans a directory(every task scans a different directory),how can I display the "real-time" count of the files in the directory which the current 5 threads in the threadpool scan onto the ListView Items in the GUI?You should notify your "monitor" when you add something to the pool, and the Runnable/Callable should notify the same "monitor" when it starts to execute, and during its processing. Finally you notify the monitor when the execution has completed.
    Kaj

  • How to get week number and day in my result?

    hi experts, i have given the data is ID and DATE(yyyymmdd),i want to get output like ID,DATE,WEEKNO,YEAR,MONTH,DAY. how to get this output.
    thanks & regards
    vijay

    In a routine transformation you can call function
    DATE_GET_WEEK
    to get the week number from the date.
    To determ the others, use the substring
    YEAR = DATE(4)
    MONTH = DATE+4(2)
    DAY = DATE+6(2)

  • How to get the number of days in a month?

    hi all
    is there any way to get the number of days in a given month with a given year? for instance, if year is 2004 and the month is July or February, how can i get the number of days? thanks.

    Gee, I don't know ... Maybe this:
    Calendar cal = Calendar.newInstance();
    cal.set(Calendar.YEAR, 2004);
    cal.set(Calendar.MONTH, Calendar.FEBUARY);
    System.out.println("max days in month: " + cal.getActualMaximum(Calendar.DAY_OF_MONTH));
    Do you not bother reading what people have already posted? Read the API docs on the Calendar class.

  • How to get the number of days of February.....

    Hi ,
    how can I get the number of days (28 or 29) of February of the current year or the next...????
    Or is there any other way to find that a year is a leap or not (i mean the year has 365 or 366 days).??
    Thanks
    Simon

    select add_months(to_date('&v_year', 'YYYY'), 12) -
    to_date('&v_year', 'YYYY') from dual;Jens, it seems we have made the same mistake, trunc usage seems mandatory :
    SQL> ed
    Wrote file afiedt.buf
      1* select add_months(to_date('2007', 'YYYY'), 12) - to_date('2007', 'YYYY') from dual
    SQL> /
    ADD_MONTHS(TO_DATE('2007','YYYY'),12)-TO_DATE('2007','YYYY')
                                                             366
    SQL> ed
    Wrote file afiedt.buf
      1* select add_months(trunc(to_date('2007', 'YYYY'), 'YYYY'), 12) - trunc(to_date('2007', 'YYYY'), 'YYYY') from dual
    SQL> /
    ADD_MONTHS(TRUNC(TO_DATE('2007','YYYY'),'YYYY'),12)-TRUNC(TO_DATE('2007','YYYY')
                                                                                 365
    SQL> Just to clarify my past doubt.
    Nicolas.

  • How to get the thread a sequence plays on?

    Hi, this is sort of a continuation of an earlier question... I have a sequence that plays back with imperfect timing. I would like to 'get a hold' of the thread that it plays back on in order to check / change its priority, etc.
    But a Sequencer is an interface; and it is gotten from the MidiSystem, which is also an interface. I am stumped as how to go about accessing the Java Sound Sequencer thread which does in fact get created by my program when I get a Sequencer from the MidiSystem.
    An excellent suggestion was given to me to extend Sequencer, then use the Thread.getCurrentThread() on my "MySequencer" object. To get a Sequencer, you call MidiSystem.getSequencer() - I can't figure out how to get a "MySequencer" (object that extends Sequencer) rather than a Sequencer from the MidiSystem.
    So, to be clear, my question is - Is there a way to get a reference to the thread that a sequence plays back on?
    Forgive me if this is a boneheaded question... I should have taken more Java classes back when I was in school...
    Thanks

    You think the GUI should be sluggish and keyboard and mouse capture delayed so someone can hear Fur Elise with precise timing as they laggingly scroll through a JTable with their mouse while waiting a few seconds for button clicks to occur?YES! That's ABSOLUTELY what I am suggesting. In none of my previous posts have I said or even suggested that the MIDI file was to be playing in the background have I? This program is about real time music recording and playback. Live, that is.* In front of an audience*. If a midi burp were OK with me, I would not have been pursuing this, would I? Everything I have posted is in relation to the timing needs I have for this program. I don't care if the flippin' screen goes blank, if the MIDI timing is good.
    OK?
    Briefly: The program has two main ... uh.. use cases. First, the GUI is used to pre-program which clips are to played where. This is not done in real time, so I am indifferent to any consideration of timing. It is mainly for this that I use the JTable. But in the Second case, when the play button is hit, the sequence plays and the clips are triggered according to what was previously been entered int the JTable. This sequence plays a drum track which I play along with. The sequence also triggers the clips to be played (via MetaMessages) which have to be to be in time with everything else - or else the program is utterly useless. So I hope you can see that at this point, the GUI doesn't really matter that much, but the timing of the MIDI sequence is crucial.
    I agree with you that perfect midi timing might not be all that important for everyone. But here's a quote from the Java Sound tutorial:
    "The Java Sound API does not include sophisticated sound editors or graphical tools, but it provides capabilities upon which such programs can be built."
    Surely Sun would not expect application designers to go to the trouble of building such programs if the Java Sound API was designed to deliver flawed Midi timing at best? Am I mistaken in thinking that stable Midi timing is possible? From all that I have read over at the Java Sound Resources web site it seems that not everybody suffers from bad MIDI timing.
    -Scott

  • How to get total number of days in current Fiscal period/year

    Hi,
    I need to get total number of days in current Fiscal period/year (current month) and assign it to an infoobject. I need a routine for this. Is there any function module to get this.If possible pls paste the ABAP code also for this task. Thanks in advance

    here is the FM:
    LAST_DAY_IN_PERIOD_GET
    KJ!!!

  • How to get a thread dump, in case of an IDE freeze

    When you're working with the IDE and if it either freezes or becomes sluggish for no apparent reason, it's recommended to generate a thread dump, and report it to Studio feedback alias ([email protected]) with a description of what happened and attach the dump to it.
    A thread dump is an invaluable source of information to IDE developers when investigating deadlocks and some performance issues. It is a textual dump of all active threads and monitors of Java apps running in a Virtual Machine.
    The ways to generate a thread dump differ depending on the platform:
    * Windows systems
    Press Ctrl-Break in the command console you used to start the IDE.
    You won't be able to see the console in case you started the IDE using the default desktop icon created by the IDE installer. To be able to generate the thread dump, you must launch the IDE using a console window (invoke Command Prompt, go to {studio-install-dir}/bin and type runide.exe), or configure the desktop shortcut properties to launch the runide.exe program instead of the default runidew.exe.
    Note: You should increase the screen buffer size of the command prompt, so that it could retian the entire thread dump output. To do that, on the command prompt where IDE is running, open the properties dialog box by right clicking on the titlebar and selecting 'properties'. Then select the 'layout tab' and increase the 'screen buffer size' parameters to - width - 200, Height - 4000.
    * Unix systems
    Press Ctrl-\ in the terminal console you used to start the JSE.
    Alternatively, you can also generate a thread dump by sending the QUIT signal to the Java VM running the JSE
    kill -QUIT process_id
    where process_id is the process number of the respective java process.
    -------Here is a sample thread dump -------
    Full thread dump Java HotSpot(TM) Client VM (1.4.2_01-b06 mixed mode):
    "Text-Layout" daemon prio=2 tid=0x0886ebd8 nid=0x4e4 in Object.wait() [9e8f000..9e8fd94]
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11730910> (a org.netbeans.editor.view.spi.ViewLayoutQueue)
    at java.lang.Object.wait(Object.java:429)
    at org.netbeans.editor.view.spi.ViewLayoutQueue.waitForTask(ViewLayoutQueue.java:128)
    - locked <0x11730910> (a org.netbeans.editor.view.spi.ViewLayoutQueue)
    at org.netbeans.editor.view.spi.ViewLayoutQueue$LayoutThread.run(ViewLayoutQueue.java:182)
    "Compilation" daemon prio=2 tid=0x0883d878 nid=0xb1c in Object.wait() [9c8f000..9c8fd94]
    at java.lang.Object.wait(Native Method)
    - waiting on <0x1143dde0> (a java.util.LinkedList)
    at java.lang.Object.wait(Object.java:429)
    at org.netbeans.core.compiler.CompilationEngineImpl$CompilerThread.nextJobAndTask(CompilationEngineImpl.java:162)
    - locked <0x1143dde0> (a java.util.LinkedList)
    at org.netbeans.core.compiler.CompilationEngineImpl$CompilerThread.run(CompilationEngineImpl.java:175)
    "TimerQueue" daemon prio=5 tid=0x03575478 nid=0xb18 in Object.wait() [988f000..988fd94]
    at java.lang.Object.wait(Native Method)
    - waiting on <0x10d4af60> (a javax.swing.TimerQueue)
    at javax.swing.TimerQueue.run(TimerQueue.java:231)
    - locked <0x10d4af60> (a javax.swing.TimerQueue)
    at java.lang.Thread.run(Thread.java:534)
    "AWT-EventQueue-1" prio=7 tid=0x0344fae0 nid=0xb14 in Object.wait() [3caf000..3cafd94]
    at java.lang.Object.wait(Native Method)
    - waiting on <0x10d4afe8> (a java.awt.EventQueue)
    at java.lang.Object.wait(Object.java:429)
    at java.awt.EventQueue.getNextEvent(EventQueue.java:339)
    - locked <0x10d4afe8> (a java.awt.EventQueue)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:162)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

    You can get a thread dump (Windows only) whitout any preparation. Simply use the Stack Trace tool from this web site:
    http://tmitevski.users.mcs2.netarray.com
    It works on Windows services too.

  • How to get the Thread in another running application??

    Hi,
    If I have a java application running (as daemon), how can I get the running thread context from another new started java application?
    What I'm trying to accomplish here is that, after I started a daemon thread ( a ServerSocket program ), I want to write another program to control the running thread ( query the status, stop it, or restart it ...).
    Any help will be highly appreciated! Thanks.

    A different java application runs in a different Processand they cannot share anything.
    Any lucky out there? Anyone tried something on this?

  • How to get the last seven days for out put of present day

    Hi Experts,
    we developed one query for 3 years data
    1.user enter the current date (21-03-2014) but out put value should be last seven days (21-03-2014 - 7) (last one week data only)
    2.some times user will enter the (20-03-2014 ) but out put value should be last seven days (20-03-2014 - 7) (last one week data only)
    how to achieve the 2 different scenario?
    is there any standard variable ? please suggest .
    Thanks,
    Bindu.

    Hi,
    i created the Characteristic value variable not formula variable
    in char variable i can't see the off set functionality but we can see off set function in formula variable
    user requirement he wants enter the input value as date and he need last week data means one week data calday wise.
    i tired the 0PREVWK , 0CWEEK these two variables these not asking the input and direct showing the out put.
    these can achieve through the customer exit?
    Thanks,
    Bindu.

  • How to get the number of days of a month belonging to a date interval

    Hi, i am getting mad around a problem, i have 2 dates and a month, i wanto to retrieve the number of days belonging to the month that are in the interval.
    eg:
    month january 2011 . begin_date = 11/JAN/2011, END_DATE 30/MAY/2011 result is 21
    month january 2011 . begin_date = 11/DEC/2010, END_DATE 10/JAN/2011 result 10
    month january 2011 .begin_date = 02/FEB/2011 , END_DATE 25/may/2011 result 0
    month january 2011. begin_date = 03/JAN/2011 , END DATE 05/JAN/2011 result 3
    and so on ...
    i appreciate any suggestion
    thank you
    Andrea

    Oh, I didnt see your result.
    SQL> with t as
      2  (select  to_date('11/01/11','dd/mm/yy') from_dt,
      3           to_date('30/05/11','dd/mm/yy') to_dt,
      4           'Jan-11' mnth from dual
      5           union all
      6           select  to_date('11/12/10','dd/mm/yy') from_dt,
      7           to_date('10/01/11','dd/mm/yy') to_dt,
      8           'Jan-11' mnth from dual
      9           union all
    10           select  to_date('02/02/11','dd/mm/yy') from_dt,
    11           to_date('25/05/11','dd/mm/yy') to_dt,
    12           'Jan-11' mnth from dual
    13           union all
    14           select  to_date('03/01/11','dd/mm/yy') from_dt,
    15           to_date('05/01/11','dd/mm/yy') to_dt,
    16           'Jan-11' mnth from dual
    17           )
    18  select from_dt,to_dt,mnth,
    19         greatest(
    20              least(last_day(to_date(mnth,'Mon-yy')),to_dt)
    21              -
    22              greatest(to_date(mnth,'Mon-yy'),from_dt)+1
    23                 ,0) cnt
    24  from t;
    FROM_DT   TO_DT     MNTH          CNT
    11-JAN-11 30-MAY-11 Jan-11         21
    11-DEC-10 10-JAN-11 Jan-11         10
    02-FEB-11 25-MAY-11 Jan-11          0
    03-JAN-11 05-JAN-11 Jan-11          3

  • How to get a thread dump from Weblogic 9.1

    Hi All,
    Can someone please walk me through how to configure a WLS9.1 server to generate thread dumps. Ideally I'd like to do this via the admin console. I read about the MagicThreadDumpFile property, but can't see where/how to set it.
    Many Thanks
    Stuart

    I only know how to do this in WLS 8.1, but it will likely work in 9.1. On UNIX, you can send a kill -QUIT to the pid and it will dump threads to standard output for the server. You can also use weblogic.Admin THREAD_DUMP (http://e-docs.bea.com/wls/docs92/admin_ref/cli.html#wp1197887) or whatever is the equivalent in WLST now that weblogic.Admin is deprecated in 9.x. I'm guessing it is the threadDump() method documented at http://e-docs.bea.com/wls/docs92/config_scripting/reference.html#wp1104314.
    I know of no way to do this through the console, unfortunately.

  • How To Get Last 5 Working Days ?

    It should take saturday and sunday as non-working days.
    I need to take care of month changes also. The preceeding month can be of 30 , 31 or 28 days. We need to take care of year change also. The java Date class doesn't work well , even Calendar abstract class also doesn't do well if month change from
    feb to jan , mar to feb , may to apr , jun to may ,aug to jul , nov to oct is required.
    if input date given is 5 Feb 2001(calculate last 5 working days)
    the output dates should be
    5/2/2001
    2/2/2001
    1/2/2001
    31/1/2001
    30/1/2001

    Here's an exmple:
    //last 5 working days
    import java.util.*;
    class LastFiveWDays{
         public static void main(String [] a){
              boolean done = false;
              int i=0;
              Date date = new Date();
              Date[] lastFive = new Date[5];
              GregorianCalendar cal = new GregorianCalendar();
              while(!done){
                   if( cal.get(Calendar.DAY_OF_WEEK) == Calendar.SUNDAY ||
                        cal.get(Calendar.DAY_OF_WEEK) == Calendar.SATURDAY ){
                             //skip
                             cal.roll(Calendar.DATE, false);
                   else{
                        date = cal.getTime();
                        //add to array
                        lastFive[i] = date;
                        cal.roll(Calendar.DATE, false);
                        i++;
                   if (i>=5) break;
              print(lastFive);
         public static void print(Date[] arr){
              for (int i=0;i<5;i++){
                   System.out.println(arr.toString());

  • How to get the number of days between 2 given dates

    Hi all,
    How can I find the number of days between any 2 given dates.
    Thanks

    Hi
    Here's a dirty way:
    If you've got two Date objects in Java, call getTime() on each one (which gives you a value in milliseconds), then subtract the two millisecond values, and divide the result by the number of milliseconds in a day (24 * 60 * 60 * 1000). There's more `elegant' ways to do this, but this method only requires one line of Java.
    Best wishes
    Kevin

Maybe you are looking for