How to get OpenGL 4 on an intel/nvidia laptop

Hi,
I have the following setup:
A lenovo T430 with intel/nvidia graphics.
I managed to get the nvidia driver and bumblebee installed. So far I am able to run games such as L4D on my machine.
However, Metro 2033, requires OpenGL4. Right now I have the mesa-10.3.5 implementation of OpenGL, which provides OpenGL 3.0.
Can anybody give me some hints.

NVIDIA's proprietary graphic card driver doesn't depends on mesa anyhow, Mesa is used with Intel driver on your laptop.
You have Nvidia NVS 5000M Series videocard (NV5x).
From NVIDIA Wiki article
For GeForce 8000/9000 and 100-300 series cards [NV5x, NV8x, NV9x and NVAx] from around 2006-2010, install the nvidia-340xx or nvidia-340xx-lts package, available in the official repositories.
If you are on 64-bit and also need 32-bit OpenGL support, you must also install the equivalent lib32 package from the multilib repository (e.g. lib32-nvidia-libgl, lib32-nvidia-340xx-libgl or lib32-nvidia-304xx-libgl).
Reboot. The nvidia package contains a file which blacklists the nouveau module, so rebooting is necessary.
Be sure noveau deleted from /etc/mkinitcpio.conf if you had it, I suggest you don't need it for now.

Similar Messages

How to get OpenGL 2.0 on Windows 8 ? I need to use it.

I need to use OpenGL 2.0 or Higher because I get some appication. But this appication show error windows "Current OpenGL version 1.1 is too low, 2.000000 expected". So I want to get OpenGL version 2.0 or Higher. How to
get it ?
Please answer me, Thanks.

Use this procedure
http://hqtips.com/pc/windows/how-to-fix-opengl-error-on-windows-8/
http://indonetworksecurity.com/windows/fix-opengl-error-in-windows-8.htm
Rgds
Milos

Anybody figured out how to get Piclens to work with Intel Mac Pro Safari ?

That doesn't work either.

The 3.0.4 and earlier Debug menue now has a different parameter name in 3.1.
Start Terminal, copy and paste in the following line and press return.
defaults write com.apple.Safari IncludeInternalDebugMenu 1
Start Safari and feel good
Additionally I restored 3.0.4 with Time Machine cause the Debug menues are a bit different.

How to get windows 7 disk for my hp laptop

My laptop got a virus and Its gone now but it took every thing off my computer from the windows 7 and the hp stuff that came with it and my laptop never came with the windows 7 disk when I got it fom hp so I cant redew it and I really need that disk I got the code for it on the bottom so where do I get my disk so I can redew my compter I dont even have a calculater that came with it so every thing is gone besides the internet so I would really love my compuer back.
Pavilion dv7
dv7-317nr

Hi:
You are missing a number from your model.
Enter your full model number in the box at the link below:
http://h10025.www1.hp.com/ewfrf/wc/siteHome?lc=en&cc=us&dlc=en&os=4063&sw_lang=&product=top
Go to the driver download page and either on the 32 or 64 bit download page there will be a link labeled Order Recovery Media.
Click on that and you can order the recovery disk set online. Oftentimes these links don't work. If that is the case, just call HP at this number 800-474-6836, and order a set by phone. You will need to provide the full model number and serial number.
Paul

I just got a new laptop and I got rid of my old one and iTunes won't transfer my apps on my iPod 4g how i get my apps to show on my laptop?

I just got a new laptop and my new one says i cant have my ipod synced to another account and it wants to erase all my apps

That is right. An iDevice can only sync to one computer/iTunes library. If you still have the computer just cpy/export yur iTunes libray to a USB stick or similar and import it ito the new computer. Also copy the iPod backup file to the new computer. That file is locaed here:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Transfer iTunes purhases to the new computer by:
iPhone and iPod touch: Unable to update or restore
Then let iTunes erase you iPod and restore the iPod from the backup and then sync.

[SOLVED]How to get higher Framebuffer than 1024x768 with nvidia module

Hello,
when I first installed Arch it loaded nouveau module for my nvidia graphicscard during boot via udev.
Everything looked fine and it seemed like it was using my nativ resolution of 1280x800 for conole.
Now with "nvidia" it doesn't look as pretty anymore since it uses the vga=773 (1024x768) framebuffer
from the Kernel Line which loooks a little bit distorted on a widescreen monitor. When I run the
HDT (Hardware Detection Tool) from Syslinux it lists all possible vesa framebuffers but 1024x768 seems
to be the max. So why is it possible with nouveau and not with the prop. nvidia driver? Is there a work
around?
Is this impossible because prop. graphics driver don't use the open driver stack?
Kind Regards,
blackout23
Last edited by blackout23 (2012-02-14 14:14:59)

Ok that makes things clear. I just tried UVesafb but it also only lists the following modes.
640x400-8, 0x0100
640x480-8, 0x0101
800x600-8, 0x0103
1024x768-8, 0x0105
320x200-16, 0x010e
320x200-32, 0x010f
640x480-16, 0x0111
640x480-32, 0x0112
800x600-16, 0x0114
800x600-32, 0x0115
1024x768-16, 0x0117
1024x768-32, 0x0118
320x200-8, 0x0130
320x400-8, 0x0131
320x400-16, 0x0132
320x400-32, 0x0133
320x240-8, 0x0134
320x240-16, 0x0135
320x240-32, 0x0136
640x400-16, 0x013d
640x400-32, 0x013e
Regards,
blackout23
To bad that nouveau is very slow at least on my laptop. Gnome Shell starts stuttering, when I open the Dash with the Super-Key.
Last edited by blackout23 (2012-02-14 16:58:38)

How to get browser's page to fit within laptop window

Upon upgrading from version 3.x of Firefox to 9.0, top and bottom portions of the page became out of vision (too high and too low) so as to make it impossible to see or click on sites, instructions, etc. at the top or to see or click on the "start" Windows button at the lower left of the screen. And so forth.

here is javascript fn: you can use:
in page layout
<script>
var myWidth = 0, myHeight = 0;
if( typeof( window.innerWidth ) == 'number' ) {
    //Non-IE
    myWidth = window.innerWidth;
    myHeight = window.innerHeight;
} else if( document.documentElement &&
      ( document.documentElement.clientWidth || document.documentElement.clientHeight ) ) {
    //IE 6+ in 'standards compliant mode'
    myWidth = document.documentElement.clientWidth;
    myHeight = document.documentElement.clientHeight;
} else if( document.body && ( document.body.clientWidth || document.body.clientHeight ) ) {
    //IE 4 compatible
    myWidth = document.body.clientWidth;
    myHeight = document.body.clientHeight;
window.alert( 'Width = ' + myWidth );
window.alert( 'Height = ' + myHeight );
txt1 = document.getElementById("ip");
      txt.value = myWidth ;
</script>
<htmlb:inputField id      = "ip"
                        value   = "<%= width %>"
                        visible = "FALSE" />
in oninput processing:
width = request->get_form_field( 'ip' ).
width is your attribute:
regards,
Hemendra
Message was edited by: Hemendra Singh Manral

How to get Snow Leopard for Mac 10.5.8 not Intel Based

how to get snow leopard to not intel based Mac 10.5.8

Is it a Mac Pro, or a Powermac?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

HT4557 I have my main computer (desktop) and my laptop and my Iphone all set up under the same itunes account. I cannot figure out how to get music that I purchased on my iphone to my desktop or laptop! I have homesharing on! It's very frustrating!

I have home share turned on and have a desktop for the main acct and a laptop and an I-phone. I purchased music on my Iphone and can't figure out how to get it onto move the desktop or laptop. It's very frustrating because I don't understand some of the I-tunes terminology and I have read through it all and did what sounds right but still no success!! Grrrrr.....I feel like I need someone to walk me through it!

Open itunes, connect iphone, click File>Devices>Transfer Purchases

My old PC blow and I need to get my music into Itunes on new laptop

My old PC blow up and I want to know how to get my Ipod music on my new laptop. I down loaded the new Itunes version and used my ID but none of my stuff is there. I am afraid that if I plug in my Ipod I will loose my music.
How do I transfer the Ipod music into my Itunes?

Don't worry about plugging the iPod into the computer, the first time you do iTunes will say that the iPod is synced with another computer and ask if you want to erase it and sync it with this computer. Click no or its equivalent and don't worry about it.
After that, you can use iTunes to transfer content purchased from the iTunes Store from your iPod to your new computer. It should be under the File menu.
If you did not buy everything on your iPod at the iTunes Store, take a look here before you transfer just the purchased content, http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/transfer-copy-songs-ipod-to-computer.html or just google transfer from ipod to computer and select your OS of choice.

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to get into BIOS in Windows 8

my question is this will the same fan control software that was on windows seven 64 bit lenova work with windows 8 and 8.1 just wondering if i have to uninstall before i upgrade or will it be compatable with 8 and 8.1 upgrade hope someone can steer me in the right direction here it would be appreciated-thanks

Hi,
follow the links below:
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/How-to-get-into-BIOS-in-Windows-8/ta-p/...
http://support.lenovo.com/en_US/detail.page?DocID=HT076607
win8 should be installed on the big HDD.
If you have enough computing skills Win8.1 Update could be installed on the small SSD using the new feature - WimBOOT.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

How to get boot camp in the emac

how to get boot camp in the emac

Furthermore, eMacs can only emulate the Windows environment, whereas Intel CPU Macs including the iMac you have running 10.6.8 can virtualize Windows. Emulation is a poor man's solution, because software is used to replace functions that normally take place with hardware. You can use the iMac to do any data conversion before it gets sent back to the eMac over a network. See my FAQ* regarding Windows on the Mac:
http://www.macmaps.com/macosxnative.html#WINTEL

How to get 64-bit install and 32-bit client to work on 1 pc

I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support requires 32-bit client (for drivers) so I installed the 11g client also.
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
Sqlplus in 64-bit works fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter error
If I open cmd prompt and navigate to 32-bit sqlplus under client this WILL work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?
Thanks in advance for any help!

lo**** wrote:
My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
>
... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
To pick up proper settings, PATH need to be set or used.
>
Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
If "Cognos" relies on system PATH, then one way to go might be:
- put path to 32-bit Client bin folder first in PATH
- set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.

How to get instrument and plug in files to logic8?

How to get instrument and plug in files to logic8?
I lost mine in a hard drive crash.
I cant use my DVD jam pack
This is my spec
Modellnamn:          iMac
Modellidentifierare:          iMac8,1
Processornamn:          Intel Core 2 Duo
Processorhastighet:          2,4 GHz
Antal processorer:          1
Totalt antal kärnor:          2
L2-cache:          6 MB
Minne:          3 GB
Busshastighet:          1,07 GHz
Boot ROM-version:          IM81.00C1.B00
SMC-version (system):          1.29f1
iMac, OS X Mountain Lion (10.8.2)

I think you want to get the latitude and longitude information of client accessing the web application. In the web application you cannot directly get the client location information as the nature of the web application is different from windows applications.
I advise you to develop a Silverlight component and in that Silverlight component use geolocation classes to get client location. Please refer this article for getting data in Silverlight http://www.c-sharpcorner.com/UploadFile/82b980/getting-geo-location-of-user-in-silverlight/
And once you get the location information you can send that data back to ASP.net webpage or call any javascript method as shown here http://ovaismehboob.wordpress.com/2013/06/22/bridging-data-between-asp-net-and-silverlight/
Hope this helps!
Ovais Mehboob Ahmed Khan http://ovaismehboob.wordpress.com

How to get OpenGL 4 on an intel/nvidia laptop

Similar Messages

Maybe you are looking for