How to get Operation wise Time for a list of Production Orders

Dear Sir,
We have a list of Production Orders numbers and need to know the operation wise time duration for these production orers (off course the desired time is same as mentioned in the routing for the relevant component)
Kindly guide us as how can we get these timing details .
Rgds
Sonia agarwal

Sonia,
I hope your are refering to setup time, process time, teardown time in the production order.
use report COOIS for it.
In the 'List choose operation.
Give input for the production orders in the slection scren. Execute.
In the report select the columns as per your requirement.
Hope this helps you.
SmanS

Similar Messages

  • How to get one elapsed time for two loops OR MORE

    I'm calculating the time spent to maintain a value "elapsed time" for 2 things(A and B) differents,what to change in order to have 1 "elapsed time" not 2 ,so the value of "elapsed time" is caculated the moment the user maintain the value of A and B
    Attachments:
    item n4 complet.vi ‏3850 KB

    My VI is already attached
    Elapsed time 2 is calculated when the user starts the test of "variometre",maintien 3 when the user keeps the pointer of the variometre in 7 for 10 seconds
    Elapsed time  is calculated when the user starts the test of"horizon artificiel",maintien 2 when the user keeps the pointer of the horizon in 30 for 10 seconds.
    that's good if i wanna each test alone,but now the complication of this one is to maintain the 2 values 7 of the variometre and 30 of the horizon in the same time during 10 secs.that's why i want to have just 1 elapsed time and 1 maintien,because the the 2 tests will run on parallel then the elapsed time must start and when the user realises the 2 conditions in the same time,the maintien must begin counting.
    Attachments:
    item n4 complet.vi ‏3850 KB

  • How to round quantity with FMS for some items in Production order lines?

    Hello,
    How to round the quantity with FMS or SP for only some items in the composition of Production order (lines) and the bill of materials like a box or a stick that should not be with commas.
    Exemple  of Production Order
    P1
      M1 | 234,78
      M2 | 104,04 --> 104
      M3 | 60,7
      M4 | 512, 00
      M5 | 107,67 --> 108
    and others will not be rounded
    Thanks,
    Hafid

    Hi Gordon,
    you're always the first to respond, thank you.
    Its when adding the production order, before its creation or when entering the quantity of product in OWOR.
    Like :
    SELECT CASE WHEN ($[$37.4.0] = 'M2') OR ($[$37.4.0] = 'M5') THEN ROUND (T0.[PlannedQty],0)
    ELSE T0.[PlannedQty] END AS PlannedQty FROM WOR1 T0
    or
    SELECT ROUND (T0.[PlannedQty],0) FROM WOR1 T0 WHERE T0.[ItemCode] =$[$37.4.0] AND (T0.[ItemCode] = 'M2' OR  T0.[ItemCode] = 'M5)
    Thanks,
    Hafid

  • How to get a list of production orders for a work center?

    Hello SDN Community, 
    I have an requirement to display in a pop-up window a list of production orders for a work center.
    Does anyone know which screens/transactions would show this relationship?
    Or better yet, does anyone know how to demonstrate this from the tables themselves?
    Thank you,
    Dean Atteberry.

    Hello Mangalraj.S
    >>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
    >>and execute,by this you will be able to see the operations for each order and to which
    >>work center they are assigned.
    The system I am working on is ECC 6.0.
    For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc".  But nothing that says PPIOO000 - operations and layout.
    >>Or else in the in input screen of COOIS,enter the work center for which you want to see which
    >>are the production order's assigned and execute.
    For system I am working in, I do get a grid display when entering a work center.  It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc."   But no column with Work Center.
    Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
    Thank you,
    Dean Atteberry.

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • How to get the end time of an Interface?

    How to get the end time of an Interface?

    Hi,
    As per your reuirement. I will suggest to use IKM SQL to SQL append. and Before Insert statement in IKM u need to add one more step i.e update. Your update should be like this
    command on sourse.
    <%for (int i=0; i < odiRef.getDataSetCount(); i++){%>
    <%=odiRef.getDataSet(i, "Operator")%>
    select      <%=odiRef.getPop("DISTINCT_ROWS")%>
         <%=odiRef.getColList(i,"", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
    from     <%=odiRef.getFrom(i)%>
    where     <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
         JRN_FLAG <> 'D'
         <%} else {%>
         (1=1)     
         <% } %>
    <%=odiRef.getJoin(i)%>
    <%=odiRef.getFilter(i)%>
    <%=odiRef.getJrnFilter(i)%>
    <%=odiRef.getGrpBy(i)%>
    <%=odiRef.getHaving(i)%>
    <%}%>
    Command on target..
    UPDATE <%=odiRef.getTable("L", "TARG_NAME", "A")%> T
    set <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> ='N',
    <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD1)")%> =SYSDATE
    where (<%=odiRef.getColList("","T.[COL_NAME]", ", ", "", "UK")%>)
    in(<%=snpRef.getColList("", ":[CX_COL_NAME]", ", ", "", "UK")%>) and <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> <> 'N'
    check UD1 and UD2 columns.
    Hope this will help you.
    Regards
    Saurabh

  • How to get the last error for while loop?

    How to get the last error for while loop? I just want transfer the last error for while loop, but the program use the shift register shift all error every cycle.

    What do you mean by "get" and "transfer"?
    If the shift register is not what you want, use a plan tunnel instead.
    Typically, programmers are interested in the first, not last, error.
    Can you show us your code so we have a better idea what you are trying to?
    LabVIEW Champion . Do more with less code and in less time .

  • How to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar?

    I was wondering how to get calendar travel time (set up in Mavericks) to show on iOS 7 calendar? If I change a location in mavericaks it is updated in my iOS 7 calendar, but if I add travel time to an appointment, that does not show up on my iphone. This seems like a big miss for apple if this is the case. I could maybe understand not adding the ability to add travel time in iOS 7, but not being able to see the travel times you set up seems very incomplete. Any ideas or insight?

    Hello Cheer,
    I don't believe the table changed when migrating from Access.  I had two tables before the migration, one was for the SwitchBoard Manager and the other table was for the database table.  I used the Switchboard to navigate to different menus, such
    as the Main Form, Power Form, Server Form, etc.  Let me know if I can provide any other information to help you narrow this down for me.   
    Thank you for your assistance. 
    Thai

  • How to get 64 bit version for premiere elements 12

    How to get  64-bit version for Premier Elements 12 ? 
    I download from ADMISY site.
    Click on win 64 bit and download it.
    When I try to install ther is a error  this download version is not for 64 bit I have try many times but same result

    Hello
    I have been away some days
    ADMISY is a software partners for Adobe
    I running Win 7 Home Edition
    I have received a card with a code when I bought the program and the I
    download from ADMISY
    Sending serial and installation warning
    PhotoshopElements_12_WWEFDJ.7z
    PhotoshopElements_12_WWEFDJ
    PremiereElements_12_WWEFDJ_win32.7z
    PremiereElements_12_WWEFDJ_win32
    I can not find a 64 bit version of 32-bit or 64-bit version of downloads
    This is information I have
    Best regards
    Erling Magnusson
    2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
        How to get 64 bit version for premiere elements 12  created by A.T.
    Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7162950#7162950>

  • How to increase the waiting time for response in Adapter Engine not in IE

    Hi Experts,
                It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired.  We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
    kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with  status flag Log version.
    Thanks & Regards,
    Srihari.

    Hi,
    Please see
    How To... Investigate Timeouts In Synchronous XI/PI Scenarios
    It will answer all your queries
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

  • How to get a organization name for a particular user using API's

    Hi alll,
    How to get a organization name for a particular user using API's

    You need to do something like this:
    SearchCriteria criteria = new SearchCriteria("User Login", "XELSYSADM", SearchCriteria.Operator.EQUAL);
                   UserManager usrService = oimClient.getService(UserManager.class);
                   Set<String> retAttrs = new HashSet<String>();
                   retAttrs.add(UserManagerConstants.AttributeName.USER_ORGANIZATION.getId());
                   List<oracle.iam.identity.usermgmt.vo.User> users = usrService.search(criteria, retAttrs, null);
                   System.out.println("ORG KEY :: " + users.get(0).getAttribute("act_key"));

  • How to get DIVISION wise report in Controlling?

    Hi,
    How to get DIVISION wise report in Controlling? I am not trying to get Division in COPA report but i am not able to see Division Characteristic in Operating concern Data structure.
    Kindly help me - where can i get good Controlling report with Division wise? why i am not able to see the Division characteristic in COPA report?
    Thanks
    Kishore

    HI,
    Check this:
    KEA0 ->Data stucture (Display) ->Extras(Menu) -> Display fixed fields. In this pop-up you will see 'Division' (SPART).
    If this field is defined as Segment level characteristic (KEQ3), then you can build reports on this characteristic using KE35.
    Hope this helps.

  • How to get the date time format in OCI

    How to get a date time format in OCI instead of only date

    You would have to use the OCIDateTime datatype for this. Refer to
    OCI documentation for more details.

  • How to get system idle time

    Hello Sir,
    I am Udhaya. I don't know how to capture system idle time using java. Please any one help me how to get system idle time. Any class is available in java to get idle time?
    Thank in advance
    Udhaya

    jwenting wrote:
    DrLaszloJamf wrote:
    jwenting wrote:
    the moment you ask the system for its idle time that idle time becomes 0, so just returning a constant value of 0 would always yield the correct answer.But when you don't call this constant method the value it would return is wrong. This is the sort of thing that keeps me up at night.Except of course that when you don't call it it doesn't return it and therefore still behaves properly.
    Or were you thinking of philosphical problems like "what does a method do when it's not called?"?Actually I was trying to see if I could get the OP to say boo to a goose.

  • Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

    How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
    Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

    I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
    I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
    If you have trouble, emai
    l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
    Good luck

Maybe you are looking for

  • GR/IR Clearing GL Account Reconciliation with MR11

    Hi Friends, Normally there is always a difference between the Delivery and Invoice, i.e. either Delivery Surplus or Invoice Surplus, the report for which we can generate from MR11, using the quantity variance - Less than/Equal to 100%. However, we no

  • IPhone/iTouch 2.0 software music, vid and photo resume problem

    Hi all, Not sure whether anyone else is getting the same problem or not but I seem to have problems resuming after I installed the 2.0 software upgrade. For example if I am listening to music and I watch a video then return to listening music, the mu

  • Browser based InfoPath Forms in SharePoint 2010 performance has slowed down after SharePoint 2010 SP2

    hi All, Our Browser based Infopath forms have slowed down drastically after applying SharePoint 2010 SP2. Prior to this, we had SharePoint 2010 SP1 and the timings was around 10 seconds (single user) for the entire infopath form to be displayed which

  • Problems watching Photos

    Hi everyone. I have problems watching my photo. I open the photo App and after suddenly the Ipad reboots. The battery is not the problem because is full charged. Does someone knows what to do?

  • Safari 5.0.1 is viral

    Updating to 5.0.1 from 4, it does not connect, then crashes. I have read other user's accounts of that problem, but what really worries me is that the prior Safari apps have completely disappeared from all my Time Machine backups on the external driv