How to get or what tcode to use for details statistics of AIX server in sap

Dear Sir,
How I get the details of AIX Server's Statistics in SAP. I mean by which tcode I can get it. Or in Server level what command should I use .
Thanks in advance,
Pranab

Thanks every one for their prompt reply.
I have got ans. by using the command : prtconf
Thanks once again everybody.
Thanks and Regards,
Pranab

Similar Messages

How do I know what Jdeveloper is using for a CLASSPATH?

yeah yeah yeah I know do
c:> echo $CLASSPATH
... or ... or look at
control panel > system > environment
Those tricks still don't tell me what
JDeveloper thinks it is using for
a classpath ... I am new to NT and
these IDE things so any help would
be nice.
Thanks

The easiest way is to compile and run inside the IDE (it is an
integrated environment after all). You can do this with the
Build, Make and Run menu items on the context menu of a java
file or project.
If for some reason, you need to compile on the command line, you
will indeed need to set the classpath environment variable
manually or pass it in as an argument to javac or java. You
could copy it from the JDeveloper output window (after compiling
inside the IDE) and paste it into a command prompt.
Was there some other specific way you'd like the IDE to
integrate with the windows command prompt?

How can I tell what library is used for readdir?

I have a problem that a program responds differently on two different unix machines, both of which are running Solaris 2.6, and using the same C compiler (4.2)
"readdir" returns a "struct dirent" where the d_name is offset by two bytes on one of the machines.
I have used ldd to detemine the libraries to which it is linked, and although they are linked in a different order, the libraries on each machine are byte identical. I have also proved that the program includes the same dirent.h file on both machines.
Dumping information from the libraries shows that there is a readdir function in /usr/lib/libc.so.1 and /usr/ucblib/libucb.so.1.
My assumption is that the header files give the same offset into the structure, but that one of the libraries is returning a differently constructed structure.
How can I find out if the program is calling the same one at run time?
Thanks for any help you can give.

I am reasonably sure that the lib that appears first in the ldd output is the
lib that is supplying the routine. One way to make sure is to use dbx to
set a breakpoint in readdir. If there are multiple copies of the readdir
symbol, which there should be in this case, it will prompt you with a list
of shared libraries that have the symbol and ask which one you want to
stop in. Pick one, then run your program. It will either hit the breakpoint,
in which case it is satisfying the symbol from the lib that you picked, or
it will not hit the breakpoint, in which case it is not getting it from that lib.
Delete the first breakpoint, then set another breakpoint in the same routine
and tell it to stop in the other lib. The fact that it stopped in the first lib
means that it's not likely to stop in the second lib, but there are ways for
it to hit both or neither. Check them both.

How to get resultset from oracle procedure use ejb3

how to get resultset from oracle procedure use ejb3
i know oracle procedure should like this
Create or replace PROCEDURE resultset_test(
aaa IN NUMBER,
bbb OUT sys_refcursor) ....
but what s the ejb3 scripts looks like? please give me an example or link~
ths

- there are no EJB3 scripts, only compiled application code
- the part of the EJB spec that deals with databases is called the Java Persistence API, but likely you are just looking for the JDBC API.
Now you should know what to Google to get your "example script": "java jdbc oracle procedure"

How to get inputtext's inputvalue by using javascript

how to get inputtext's inputvalue by using javascript?
and how to judge whether its be filled or empty string

Why do you want to use javascript..? Why not action listener..? You can check whether its an empty string by checking
if(str != null && !str.equals("")) {..}
where str is the variable for inputText value.
If this is not helpful, do provide more details on which version of JDev you are using and what are you trying (your usecase).
regards,
~Krithika

How do I determine what URL to use when launching to display a RH10 .htm page?

Hello,
We are implementing RoboHelp 10 for our online documentation and are sourcing it from Framemaker 11. I am trying to determine exactly what URL information the developers need to build for the launch to the specific IBM System i screen. Is anyone launching RoboHelp from a backend ERP system? If so, how did you determine what level to use when building the URL for that page? Thanks for any assistance you can provide.

It depends on whether you just want to open the help at the default topic or open context sensitive topics.
Both methods are described in Calling Help on my site and there is more good information at http://www.wvanweelden.eu
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do you know what classes to use ?

Hello,
This may sound daft - but how do you know what classes to use to do a particular task ? For example to do password-related stuff - how would I know which classes are all relevant to that ? Am I supposed to buy a book on the classes as the API documentation doesn't really tell you WHEN to use which classes.

If you're using JSP, then your password field is likely going to be implemented in HTML. So that's nothing to do with Java. (And you can't use a JPassword field in a JSP page.) But when that field comes back to your server, you may be using Java to authenticate it. Even there, the question is not yet what Java method you are going to use, but what methodology. You could have a database to authenticate against, or an LDAP directory. Or you could have the web server use its built-in authentication, which means you don't have to do any Java coding at all. And there are other ways.
So the question before yours is, how do you know what methodology to use? Again, that comes down to experience.

How to get Default Activity(Infotype 0315) using BAPI

Hi Everyone,
I have a task to get Default Activity by Personal number for my third party application. Unfortunately function HR_READ_INFOTYPE is not allowed for Remote Call.
Is there any simple way how to get this value from system using BAPI? E.e. using RFC_READ_TABLE function(but i don't know table name ).
Thanks,
Roman.

Table -> PA0315 Field ->LSTAR (Activity Type)
Class :CL_HRPT_INFOTYPE_0315
You can also use FM "CATS_GET_INFOTYPE_0315" RFC Enable
Good luck !
~Saquib

TES 6.1.x - how do you tell what DB is used by ClientMgr?

We just externalized the Client Mgr DB to Oracle, updated config files, etc. How do you tell what db is using - Derby or Oracle?

After you externalize the CM database, you should see the db objects (tables and views) in the database are now created shortly after you start the CM service.
You can verify creation of database objects in the actual database and in the plugin log upon start-up. This log can be found under the ../ClientManager/plugin/tes-6.0/log directory
John

What is SM62 Tcode is used for? and the consequence's for executing it?

What is SM62 Tcode is used for? and the consequence's for executing it?
Thank you,
York

Hi Les,
You can goto this URL to understand more about events :
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/c079239d3756a2e10000000a1553f6/frameset.htm
http://www.sapfans.com/sapfans/sapfaq/robert.htm
About my experience working with events:
In one of my BW Project: we were using AutoSys to do job scheduling (to run InfoPackages).
To automate the loading process we created events for each infopackage. Then in that Infopackage we used to select option "Start later in Background" and then select option "After Event". Then specified the event name and parameter.
Then in the same infopackage we selected button "Subsequent Process" the in that seelct option "Trigger Events" Here you can have options to specify if this event is successful then what next event to trigger and if this event fails what next event to trigger.
So this way we used to automate data loads.
This was dont caz there was no process chains concept during that time. So good example of events and event based process are PROCESS CHAINS.
Hope this helps !!
Assign points if helps !!
Regards,
Naveen Rao Kattela

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back. I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor. How do I stop this?

Does Firefox switch to full screen if you press F11 ?
You can also try the F10 key to see if that brings up the menu bar.
* If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

If you don't have a credit card then you might be able to use iTunes gift cards instead - that's what I currently use for purchases. You might be getting the 'billing problem' message due to it being a debit card, which as I said I don't think are still a

If you don't have a credit card then you might be able to use iTunes gift cards instead - that's what I currently use for purchases. You might be getting the 'billing problem' message due to it being a debit card, which as I said I don't think are still accepted - you might want to contact iTunes Support via the link that I gave to confirm one way or the other if that is the case.

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

What are the uses for Macbook pro and Macbook air?

Hi! I am deciding between MBA and MBP and need to know what the different uses for each one was. Like what would you use the MBA for and what would you use the MBP for?? All opinions welcome!!

They're actually pretty comparible in what they can do if you're talking about the base model of both (say 13") with 4GB RAM. At that level, the Pro has the advantage if you're going to watch or burn DVD's or CD's, as the Air has no optical drive. But otherwise, they're pretty much the same--full-sized, backlit keyboard, camera, beautiful screen, etc. If you're going for more than a basic 13" Pro, then things start to change. For example, you can get up to 8GB RAM on the Pro, and a huge hard drive, you can also get a 15" or 17" size. You will be paying a lot for these, but, obviously, if you're going to be working on, say, making videos (which you may then want burn onto disk) the Pro is very much what you'll want.
However, if you don't need or want any of that--if, for example, you plan to do the usual programs (word processing, games, web surfing, music, etc.), then you really won't see much difference between the two. At 4GB RAM and a 13" screen, the big difference is going to be thickness and weight, not power. And in this the Air will have the advantage--it's really amazingly slim, light and with a SSD, faster (you pay extra--a lot extra--to get SSD on the Pro).
Just to make the point, I switched from a 13" Pro to an 11" Air. My hard drive size is half what it was with a Pro, but I was barely taking up half of that amount on the Pro, and so have plenty of room on my 128GB Air (you can get 256GB for the 11" if you order it online). Absolutely everything my Pro did, my Air does (sans optical drive), only faster and lighter and more compact--meaning it takes up less table space, slips in and out of my bag faster, balances on my lap easier, etc. But there was no interruption of service--I switched pretyt seamlessly from 13" Pro to 11" Air.
The Pro offers you more options for power, screen size, HD size and optical drive. But it's really pretty surprising how few of us need that much power, that much room, or the optical drive. It's very freeing to realize that less can be more than enough.

How to get the elements out of a for loop simultaneously during the loop execution

Hi,
I am student. I would like to know how to get the counter values outside the For loop parallely while the loop runs rather that getting the finally value outside the For loop. Looking forward for answers.
Thanks,
Athira
Solved!
Go to Solution.

You could use a notifier (since it is a single value) or a reference (with a property node) to a control that gets the value elsewhere in another VI.
If it is within the same VI, you could use a property node (right click > create > property node > value) from the control within the same VI located outside the loop.
If you promiss NOT to abuse the use of Local Variables, you could use that to only write from ONE location within the For Loop to a control outside the loop, similar to the property node mentionned earlier. (Of course, I will be struct by lightening for mentionning that and scolded by other LabVIEW coders for having a change of heart on the use of Locals.... Shivers are already crawling up my spine).
You could use a queue, but that might be an overkill, unless: the count is generated faster than it is being read elsewhere...
As crossrulz mentionned, can you describe what you will be doing with the count? Because synchronizing data (fresh / stale / etc) is very important within LabVIEW as it executes based on dataflow rather than a sequential order.
Hope this helps.
EDIT:
You have not fully provided the answer. We figured that much of your code from your description, but what is reading the value of the count? Is it in a separate loop? If not, it may only deal with the first value, which is likely 0. The proper advice depends on how you process the received data (count).

What is a cache monitoring? and what it is used for?

what is a cache monitoring? and what it is used for? how safe it is to execute the transaction RSRCACHE in development?
Thank you,
York

Hi Les,
Cache is a temporary storage for recently accessed data.
Used to enhance query performance.
Use t-code RSRT to view more on cache.
Please see this link:
http://help.sap.com/saphelp_nw04/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/content.htm
Cache helps to improve query performance. As it can save data in memory, flatfile, cluster table or BLOB.
You can remove cache per query or inactivate it for perticular info provider or inactivate it overall.
But which is not recommended. Yes if u know that certain queries you dont use often and its not accessing large number of records then you can inactivate it for those queries. you can manage cache via three t-codes RSRT or RSRCACHE or SPRO>SAP Reference IMG>SAP Busines Wearhouse--> Reporting relevent setting -->General Reporting Setting in BEX -->Global Cache Setting.
please follow the link which has few good documents on cache. which will clear your complete concept for cache.
https://service.sap.com/bi -->Product information previous releases -->BI InfoIndex --> OLAP --> you will get bunch of documents in that.
Look at the following threads :
OLAP Cache
what is cache?
also check RSRT and OLAP cahce docs
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/afc59790-0201-0010-9f99-940f7c3934fc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7c361b95-0501-0010-c0ab-897c5aa14504
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/31b6b490-0201-0010-e4b6-a1523327025e
Hope this helps.
****Assign Points if Helpful****
Regards,
Ravikanth.

How to get or what tcode to use for details statistics of AIX server in sap

Similar Messages

Maybe you are looking for