How to get Partner Number based on Vendor Number
Hi,
I have vendor number(LIFNR), I would like to find out the partner number(PARNR) for this vendor number. I tried a lot but unable to find it.
Any help will be appreciated.
Thanks,
Ibrahim
Hi...
have u checked the table VBPA(table for Sales Document: Partner)..in this table you can get the PARNR(Number of contact person)..
Hope this solve your problem.
Thanks
shankar
Similar Messages
-
How do i get pending RFQs based on vendor
Hi Gurus,
could anyone tel me,how do get pending Quotations based on vendor and their statuses.
Status for the Pending RFQs based on VendorHi Priyanka,
Vendor=3730, plant=3000, company=3000
I have created RFQ=6000000452,
PQ=4500018292,
GR=5000011825,
INVoice=5105608648
I have checked for RFQ status in the 'EKPO' table of
STATU field Then It shows ---(space) Even i have created,
that means 'No Quotations were created". what is problem
and how can i find out Pending RFQs for a perticular
Vendor. -
How to get BP kind based on user name?
Hi,
How to get BP kind based on user name?
Is there any table other than BUT000 which gives the Business partner no. and BP KIND?
What is BLUEPRINT table?Hi John,
do you mean Type:
1 Person
2 Organisation
3 Group
or Role like
000000 Business Partner (General)
BBP000 Vendor
BBP001 Bidder
BBP002 Portal Provider
BBP003 Plant
BBP004 Purchasing Company
BEA001 Billing Unit
BUP001 Contact Person
BUP002 Prospect
BUP003 Employee
BUP004 Organizational Unit
BUP005 Internet User
The Role can be found in BUT100.
Regards
Gregor -
How to get BP number having SAP User ID .?
HI all,
How to get BP number of a user having his SAP User ID .?
Help reg this.hi check this...
In SUS Link between registered User ID and Business Partner (Vendor) Number
Assign User to Business Partner
regards,
venkat . -
How to get the number of decimal places configured for a site column
Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijitGet the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat; -
Hi ,
In Idoc to file Scenario (KU to LS), how to assign Partner numbe (KU) in R3 Sender system.
I m getting below error:-
No partner profile (outbound parameter) could be found using the following key:
Do the needful.
thanks
AnshulYes, I have the partner profile maintained in we20 of type KU
In We19, it is showing error:-
No partner profile (outbound parameter) could be found
For Example- For Logical system it is possible through SALE -
How to get week number from date
Hi,
please mention how to get the number of week from a particular date using fn module?Hi Debarshi,
Use FM <b>DATE_GET_WEEK</b>
Reward points if helpful.
Regards,
Hemant -
How to get total number of days
Hi All,
how to get total number of days , for example if month eq 05 then need to get total number of days until MAY 31.
and how to get total number of days in a month.
Thank You,,
Sriii..Hi Sridhar,
Pls Try to search before posting general questions.
Try this,
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = p_lv_date1
i_datum_von = p_lv_date2
IMPORTING
e_tage = p_e_date_difference
EXCEPTIONS
days_method_not_defined = 1
OTHERS = 2
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Sunil kairam. -
Indesign CS3: How to get the number of the current layer?
Hallo!
How to get the number of the current layer in a page?
Thanks,
Alois BlaimerInterfacePtr<ILayerList> layerList(documentUIDRef, UseDefaultIID()); <br /><br />int32 layerCount = layerList->GetCount();<br /><br />To findout layer name use<br /><br />IDocumentLayer* documentLayer = layerList->QueryLayer(layerIndex);<br /> <br />PMString layer=documentLayer->GetName();
-
How to get physical number of selected row on the screen.
Hi,
We have block defined with Numbers of Records Displayed = 3. In the same time the data set contains 10 records. We would like to know how to get a number of row selected on the screen. i.e. in our case that the number will be always between 1 and 3 independent of the current row position in the data set.
Best regards,
Constantin.You can calculate that number by subtracting :SYSTEM.CURSOR_RECORD and GET_BLOCK_PROPERTY('BLOCK', TOPMOST_RECORD)
-
How to get the number of columns in a result set???
hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advanceYou shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.
-
How to get row number of selected entry from OVS search result
Hi,
Anyone having any idea on how to get row number of the selected entry/ how to differentiate rows in OVS search result in ON_OVS method?
Regards,
JatinHi,
You can get the selected record to <ls_selection> structure in co phase 3.
From that structure you can get what ever field you want.,
check the below code for reference,
<< Moderator message - Cut and paste response from F4 help for ALV table field removed. Plagiarism is not allowed in SCN >>
hope this helps u.,
Thanks & Regards,
Kiran
Edited by: Rob Burbank on Jan 5, 2012 5:24 PM -
How to get paragraph number of selected text in ID CS4
Hi,
Can anybody help me how to get paragraph number of selected text in Indesign cs4.
Thanks,
GopalAh, I see -- thanks. Turns out that there's no difference in speed between texts.itemByRange(), characters.itemByRange(),and insertionPoints.itemByRange(). In a document with 170 pages of text, and with the cursor in the last paragraph, the second and third lines, below (and your function), give exactly the same result:
t = app.selection[0];
t.parentStory.texts.itemByRange (t.parentStory.insertionPoints[0], t).paragraphs.length;
t.parentStory.characters.itemByRange (t.parentStory.characters[0], t).paragraphs.length;
Peter -
How to get the number of files currently open?
hi,
does any one know how to get the number of files currently open in windows OS?
e.g. lets say .txt files...
any comment will be really appreciated.
thanksAssuming that you don't want to actually do this from within Java code (which would obviously require native code), here's a utility that will give you a list of which file handles are opened by which processes (on Windows):
http://www.sysinternals.com/ntw2k/freeware/handle.shtml
- K -
How to get the number of elements in DB
Could you tell me how to get the number of elements in DB??
My code to get the number is below, but I think it is not efficient
DB->cursor(DB, NULL, &cursorp, 0);
while ((ret = cursorp->c_get(cursorp, &key, &data, DB_NEXT)) == 0)
count++;
--------------------------------------------------------------------------------------------------------------Hi,
The most efficient way to get a count from the database is using the DB->stat API (http://docs.oracle.com/cd/E17076_02/html/api_reference/C/dbstat.html)
The code will be something like:
DB *dbp;
DB_BTREE_STAT *statp;
int ret;
/* Print out the number of records in the database. */
if ((ret = dbp->stat(dbp, NULL, &statp, 0)) != 0) {
dbp->err(dbp, ret, "DB->stat");
goto err1;
printf("%s: database contains %lu records\n",
progname, (u_long)statp->bt_ndata);
free(statp);The code comes from the example included in the distribution at examples/c/ex_btrec.c
If the database isn't a btree, you should update to the appropriate statistics structure and field.
It's worth noting that retrieving the count is never a "cheap" operation. The count is not stored in the database - since doing so introduced a single point of contention that creates a bottle neck.
Regards,
Alex Gorrod
Oracle Berkeley DB
Maybe you are looking for
-
Lacie External Hard Drive disappeared!
Updated my G5 and iBook last night to 10.4.9. This morning noticed my Lacie HD, connected via firewire to my G5, wasn't showing on the desktop. At first I thought it might be connected to the update, so I plugged it into my old G3, running 10.4.8, bu
-
I don't understand what to do. The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.
-
SAP Script Check printing Layout, Line Items to display twice in First Page
Hi All, This requirement is for US check printing Layout. My Requirement is to display Items twice on the first page. Eg : Main Window has 10 Items, I need to display all the Items at the bottom in another window at the bottom. I can't create 2 Main
-
Cannot remember my system admin name
I cannot remember my system administrators name, I know my password, please help it is driving me round the bend
-
How to create an alias for a custom command line with paramters
Is it possible to create an icon that runs a terminal command line ? What i want to do is start firefox with a specific profile. In terminal this is done by using Firefox -P [profileName] How can I put this in an alias (or something else) ? I tried c