How to get password manager firefox

How do I get the "password manager" turned on in firefox?

See [[Remembering passwords]]
Also make sure that you not run Firefox in (permanent) [[Private Browsing]] mode

Similar Messages

How to get password of a logged in portal user in webdynpro.

hi,
i want to get the password of the logged in portal user through webdynpro. i already know how to get the user id and other information through webdynpro (using WDClientUser), but i want to get the password as well.
this is an urgent requirement. Immediate help will be highly appreciated and points will be awarded for helpful answer.
thanks in advance.

Hi
User Management APIs don't give the liberity to obtain the password, instead you can verify a password. Please check if your requrirement can be modified to check for password.
Please use code mentioned below and the one suggested before.
loggedInUser = WDClientUser.getCurrentUser();
user = loggedInUser.getSAPUser();
if (user != null)
IUserAccount[] acct = user.getUserAccounts();
if(acct[0] != null)
b = acct[0].checkPassword(password);
Thanks
Srikant

How to get passwords working in Pages documents?

I've set a pages document to require a password to open. When I open the file, it opens without requiring this password. Any thoughts on how to get the password working? The doc is on icloud, could that be a factor?

Finally, I've added a new field movement in transaction GCF2 with sender tables ACCHD, ACCIT_GLX AND ACCCR. The joint venture name comes only from FI documents and not JVA documents, so, only JVA information of P&L accounts is available.
Best regards,
Alfredo Del Portillo

I don't know much about computers but I downloaded firefox 8 after having 7 and now I can't get my paycheck info. on 8 like I did on 7. I would like to know how to get back on firefox 7

I would like to get rid of firefox 8 and go back to firefox 7 and I don't know how. P.S. for a firefox 7 for windows desktop.

Firefox is a web browser like Safari, it doesn't do photo editing.

How to get a manager name according to a name of clerk

Hi,
i know the clerk name.(T-code: PA30 infotype:0001)
how to search his/her manager name
Thanks in advance.

Hi,
Other way is Goto Infotype 0001 for that person(Clerk) & place the cursor on the org.unit & click "Org Structure" button on the top(beside the overview button). Then search for the org. unit of clerk & you will get the chief of that org. unit & you will get the manager personnel number.
Hope this helps.
Thanks,
Sarika.

How to get password as string back from encrypted password byte array.

Hi All,
I am storing encrypted password and enc key in the database.(Code included encryptPassword method for encryption and validatePassword method for validating of password). Problem is that for some reason i need to show user's password to the user as a string as he/she entered. But i am not able to convert the encrypted password from D/B to original String.
Tell me if any body know how to get the string password back from the encrypted password byte array after seeing my existing encryption code.
//********* Code
private Vector encryptPassword(byte[] arrPwd)
try
// parameter arrPwd is the password as entered by the user and to be encrypted.
byte[] encPwd = null;
byte[] key = null;
/* Generate a key pair */
KeyPairGenerator keyGen = KeyPairGenerator.getInstance("DSA", "SUN");
SecureRandom random = SecureRandom.getInstance("SHA1PRNG", "SUN");
keyGen.initialize(1024, random);
KeyPair pair = keyGen.generateKeyPair();
PrivateKey priv = pair.getPrivate();
PublicKey pub = pair.getPublic();
/* Create a Signature object and initialize it with the private key */
Signature dsa = Signature.getInstance("SHA1withDSA", "SUN");
dsa.initSign(priv);
/* Update and sign the data */
dsa.update(arrPwd, 0, 12);
/* Now that all the data to be signed has been read in, generate a signature for it */
encPwd = dsa.sign();
/* Now realSig has the signed password*/
key = pub.getEncoded();
Vector vtrPwd = new Vector(2);
vtrPwd.add(encPwd);
vtrPwd.add(key);
return vtrPwd;
catch (Exception e)
private boolean validatePassword(byte[] arrPwd,byte[] encPwd,byte[] key) throws RemoteException
try
// arrPwd is the byte array of password entered by user.
// encPwd is the encrypted password retreived from D/B
// key is the array of key through which the password was encrypted and stored.
X509EncodedKeySpec KeySpec = new X509EncodedKeySpec(key);
KeyFactory keyFactory = KeyFactory.getInstance("DSA", "SUN");
PublicKey pubKey = keyFactory.generatePublic(KeySpec);
/* Encrypt the user-entered password using the key*/
Signature sig = Signature.getInstance("SHA1withDSA", "SUN");
sig.initVerify(pubKey);
/* Update and sign the password*/
sig.update(arrPwd, 0, 12);
return sig.verify(encPwd);
catch (Exception e)
Help upto any extent would be appreciated.
Thanx
Moti Singh

Hi All,
I am storing encrypted password and enc key in the
database.(Code included encryptPassword method for
encryption and validatePassword method for validating
of password). Problem is that for some reason i need
to show user's password to the user as a string as
he/she entered. But i am not able to convert the
encrypted password from D/B to original String.No, you are not encrypting the password in your code, you are merely signing it.
Tell me if any body know how to get the string
password back from the encrypted password byte array
after seeing my existing encryption code.It is impossible to retrieve the original text out of a signature.
You should read up on some encryption basics in order to understand the difference between signing and encrypting. Then you can find examples of how to encrypt something here: http://java.sun.com/j2se/1.4/docs/guide/security/jce/JCERefGuide.html.
Actually there is one class specifically for keeping keys secure, KeyStore http://java.sun.com/j2se/1.4/docs/api/java/security/KeyStore.html
- Daniel

How to get passwords from history

Trying to obtain a password from a old app

HI L.B.
You can sync passwords from a Firefox desktop to Firefox for Android but because this is a Firefox support forum there's no way we can help with passwords in another application besides Firefox!
(just in case here are the docs for Firefox account sync:
https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync
Cheers!
...Roland

Exported Safari Bookmarks (Safari bookmarks.html) arrive in MyDocuments but not in Firefox, how to get them into Firefox Bookmarks?

Five months ago, I imported my Firefox bookmarks into Safari. In that time, I have added many bookmarks to many of the bookmark folders in Safari. Now, I am trying to import back into Firefox all of the existing Safari bookmark folders including the added bookmarks. Tried exporting from Safari using File, Export Bookmarks, which does get them into MyDocuments\Safari bookmarks.html, but I am unable to get them into Firefox where they would enable me to uninstall Safari and free up some room on my hard drive. Maybe they are there in Firefox, but need to Find them?

Did you import the HTML file?
* Bookmarks > Organize Bookmarks > Import & Backup > Import HTML : "From File"
Bookmarks that you import are usually appended at the bottom of the Bookmarks Menu folder.<br />
If you do not see them there then try to use the search bar to see if they show up.<br />
If that also doesn't show them then it is likely that something went wrong with importing the bookmarks.<br />
Does that file display correctly if you open it via "File > Open File" in a Firefox tab?

How to get reporting manager and HR of an employee

Hi everyone,
I am new to HR , i have created an org unit (O) in PPOC_OLD tcode which is having three positons (S),
Pos 1 is an HR pos which is assigned to a Holder (Pernr ) with relation Incorporates.
Pos 2 is Project Manager which has also a Pernr as Holder with relation as Incorporates.
Pos 3 is a Developer which has also a pernr attached to it with relation as incorporates.
Now i need to create a reporting stricture that shows the developer repoting to its Project manager as well as to the Hr in Pos 1.
I hope you all got the idea ..!!!
Thanks
Ravi

Hi Ravi,
<li>Get the Organization unit maintained for Employee from Infotype 0001(PA0001) field ORGEH.
<li>Use below function module to get the manager of that employee.
DATA: swhactor TYPE swhactor OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
    act_otype      = 'O'
    act_objid      = p0001-orgeh
    act_wegid      = 'B012'
TABLES
    result_tab     = swhactor
EXCEPTIONS
    no_plvar_found = 1
    no_entry_found = 2
    OTHERS         = 3.
I hope that it helps.
Thanks
Venkat.O

How to get VCast Manager to stop launching

I have clicked the "do not launch vcast manager when I connect my phone" but it still launches. Please help.

Hi,
I could create the object id using the oo01 transaction
Now how should i proced to give relationship..
I want a simpleexampel where i can relate an manager to an existing empoyee.
My scenario is as follows:
a) I have created a person with following infortypes (0000,0001,0006,0002) using the pa30 transaction.
b)Now how shoild i creat manager and relatye it to the person which i ahev just created.
Please help me with an example
Best Regards
MAnoj

How to get password off start up?

How do I get rid of the password at start up?

Hi John ...
Open System Preferences > Users and Groups then select the Password tab.
Click the lock icon (bottom left corner of the pane) to make changes.
Select your user name from the pop up menu next to: Automatic Login
Click the lock.

How to get Password Hash in java ?

How can i get the hash password from one user to copy to other
application or ldap ( like sync ) in java ldap or jdbcldap ? Is it
possible ?
Exist some kind of class or method on java to get clear text Password
or hash password in eDirectory users ?
thanks !
samirissa
samirissa's Profile: http://forums.novell.com/member.php?userid=58315
View this thread: http://forums.novell.com/showthread.php?t=416414

In the Universal Password policy, there is an option to allow specific
user sto retrieve the password. I haven't used this feature before, but I
assume that it would allow you to get the actual password via LDAP.
Jared Jennings
Senior Systems Architect, Data Technique, Inc.
http://www.datatechnique.com
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org
Twitter@ jaredljennings

How to get the mozella firefox on mac

how do I get the firefox on this computer and I have comcast so is it ok to put the ie on this computer so i can get my email..right now i go to my pc...hope to hear janis

well you can do a few things...
you can buy Ofiice Mac and use Entourage, MS mac equiv to Outlook.
You can use Mail - Apple's defualt email program You jsu tneed to set up your comcast account. (Note: I wouldnt use mail if you like to use IMAP instead of POP - if you have no clue what thos emean youre probably using POP and MAil will be fine).
you can use another mail application that you purchase or download for free. Some Examples might be:
Mozilla Thunderbird - http://www.mozilla.com/en-US/thunderbird/
mailsmith - http://www.mailsmith.com/products/mailsmith/index.shtml
Its all up to you. Mail accounts are essentially universal things. If you can get your email with Something like outlook you can essentially get it with any other Email Client. So find one you like and have at it!

How does Get-Info manage ext disk access & permission

I was having a terrible time today trying to back up my HD to an external drive. I was using SuperDuper. The SD dialog box allowed me to choose 2 of my ext drives as targets. But the drive I preferred was 'greyed out'. I couldn't select.
So, I thought that perhaps I didn't have read-write permission for it. I pulled up a Get Info dialog box, and this is how it is configured (see below).
My user name doesn't even appear in the Sharing and Permissions box. Nor do I see the little check box which asks IGNORE OWNERSHIP.
I clicked on the little padlock icon and entered my password. But I still couldn't change the configuration. I just wanted to back up to that one disk named 2tb Boot-backup. Nothing more. The drive is a boot drive, incidentally. But I was running the OS on my main HD (iMac).
Frustrated at this (the Missing Manual didn't help), I gave up and reinstalled Mavericks on that ext drive. It fixed the problem, at the cost of 2 1/2 hours.
And I'm not any wiser about how Mavericks controls access. Screen shots below tell the story. My User Name does not appear in the Sharing list. Please teach me. Where is David Pogue when you really need him?

For a very long time before making my purchase choice, I neurosed about the processing power demands if Aperture. Few folks at MacRumors knew what specs would suffice. I must have exchanged 15 posts over there and learned little.
At the time I had a 2007 iMac with 6Gb or RAM. I borrowed Aperture from a friend and played with it. Knowing that would I made a computer purchase from the Apple Store, free softeware would come with it. I prefer to be play straight. Not because of fears of the 'software pirate police.' I want the support and documentation.
By having the actual program loaded in my box, I began paying watching the Aperture Tutorials on the Apple Support website. In the case of Aperture, there is a whole lot to learn. A huge amount. Maybe because it was my first PP and DSLR experience. It took a lot of time to get comfortable.
Eventually, I discovered more AP tutorials on YouTube. And then, I found the so-called Silver Bullet. The Aperture forumlll. The answer I wanted was neither simple nor straightforward. But I was able to decide on the right Apple machine, with an adequate CPU, GPU and RAM.
Aperture processes some function in the CPU. It processes others in the GPU. And RAM undergoes heavy pressure only at certain times. While 'Importing' RAW files from an SD card, the CPU works hard. It is best to have clock speeds of at least 3.2Ghz. Along with the image, Aperture will import the embedded camera preview in Jpeg format. Things go faster if you select to import the file and preview. Regardless, camera previews are small and low resolution. Aperture then favors generating its own hi-res JPEG for use will browsing your library of photos.
Editing an image, which is called an 'Adjustment' in the program doesn't take nearly as much processing power as one would expect. Aperture is a non-destructive program. The original RAW file is never touched. All the changes are merely tacked on and are reflected on the screen or when saved as 'Versions' only. The version is tiny compared to the master file. A good metaphor would be baking. You might start out with a Lemon Cake in the oven. But then you put Chocolate frosting on top. The result looks and tastes different. But it is always a Lemon Cake.
The GPU then takes over. Late generation GPU with at least 1000Mb of video ram, 32-bit color depth would be minimum. The NIVIDEA Geoforce GT 755 satisfies those demands. Though if I ever start playing with Video instead of Sill, I might wish for 64-bit color space.
I probably have some of the details mixed up. But the fundamentals given are what I heard. At least one of the responders on the Aperture forum was on Apple team that wrote the software. That's all I know, and I'm not trying to get anyone to 'change religions'. SSD ain't going to make my image editing improve. Incidentally, on my iMac, Aperture loads in about 4 seconds.

How to get password on first account

It looks like I have two accounts with adobe with the same e-mail address, how do I get get the first password?

Hello,
Do you want a password reset for you Adobe ID ?
Thanks,
Vikram

How to get password manager firefox

Similar Messages

Maybe you are looking for